RESUMEN

Research on soil biochar fertilization has mainly been conducted on cereal crops, and information on its potential for radish production remains inconsistent. Therefore, a pot experiment was conducted to examine the short-term effects of rice husk biochar on radish growth and nitrogen use efficiency (NUE). An investigation was conducted with two application rates of biochar alone, (10 t ha-1 (B10) and 25 t ha-1 (B25), and biochar + chicken manure application with and without NPK fertilizer. The results indicated that the application of biochar 25 t ha-1 + chicken manure (B25:CHM) and the combination of biochar 25 t ha-1 + chicken manure + NPK fertilizer (B25:CHM:NPK) significantly increased root yield by improving NUE, fertilizer recovery efficiency (REN), agronomic efficiency (AE), nitrogen harvest index (NHI), and retaining soil NH4+-N. Although biochar application alone did not significantly influence radish growth on a short-term basis, B10 and B25 increased root yields by 10% and 20%, respectively, compared with the control. Notably, the role of biochar application when combined with organic and inorganic fertilizers was to retain fertilizer N and promote N uptake efficiency by radishes, as higher rates of biochar resulted in higher NUE. Our results suggest that B25:CHM is a suitable combination for organic farming.

RESUMEN

The present study utilized rice husk biomass as a carrier to synthesize rice husk biochar loaded with iron and nickel. Mono-metallic and bimetallic catalysts were prepared for the removal of toluene as the tar model. The efficiency of the catalysts for the removal of toluene was investigated, and finally, the removal mechanisms of mono-metallic and bimetallic catalysts for toluene were revealed. The experimental results showed that the bimetallic-loaded biochar catalysts had excellent toluene removal performance, which was closely related to the ratio of loaded Fe and Ni. Among them, the catalyst DBC-Fe2.5 %-Ni2.5 % (2.5 wt% iron loading and 2.5 wt% nickel loading) obtained through secondary calcination at 700 °C achieved the highest toluene removal efficiency of 92.76 %. The elements of Fe and Ni in the catalyst were uniformly dispersed on the surface and in the pores of the biochar, and the catalyst had a layered structure with good adsorption. Under the interaction of Fe and Ni, the agglomeration and sintering of Ni were reduced, and the surface acidity of the catalyst was increased, the surface acidity was favorable for toluene removal. The iron­nickel catalyst did not form significant alloys when calcined at 400 °C, whereas strong metal interactions occurred at 700 °C, resulting in the formation of Fe0.64Ni0.36 alloy and NiFe2O4 alloy. This NiFe alloy had abundant active sites to enhance the catalytic cracking of toluene and provide lattice oxygen for the reaction. Furthermore, the functional groups on the catalyst surface also had an impact on toluene removal. The catalyst prepared in this paper reduces the cost of tar removal, can be applied to the removal of industrial pollutant tars, reduces the pollution of the environment, and provides theoretical guidance and technical reference for the efficient removal of tar.

RESUMEN

In order to evaluate the feasibility of rice husk and rice husk biochar on assisting phytoremediation of polycyclic aromatic hydrocarbons (PAHs) and heavy metals (HMs) co-contaminated soils, a 150-day pot experiment planted with alfalfa was designed. Rice husk and its derived biochar were applied to remediate a PAHs, Zn, and Cr co-contaminated soil. The effects of rice husk and biochar on the removal and bioavailability of PAHs and HMs, PAH-ring hydroxylating dioxygenase gene abundance and bacterial community structure in rhizosphere soils were investigated. Results suggested that rice husk biochar had better performance on the removal of PAHs and immobilization of HMs than those of rice husk in co-contaminated rhizosphere soil. The abundance of PAH-degraders, which increased with the culture time, was positively correlated with PAHs removal. Rice husk biochar decreased the richness and diversity of bacterial community, enhanced the growth of Steroidobacter, Bacillus, and Sphingomonas in rhizosphere soils. However, Steroidobacter, Dongia and Acidibacter were stimulated in rice husk amended soils. According to the correlation analysis, Steroidobacter and Mycobacterium may play an important role in PAHs removal and HMs absorption. The combination of rice husk biochar and alfalfa would be a promising method to remediate PAHs and HMs co-contaminated soil.

Asunto(s)

RESUMEN

Cadmium (Cd) accumulates in the vegetative tissues of rice and wheat crops, posing a serious threat in the food chain. A long-term field experiment was conducted to investigate the effects of rice husk biochar (RHB), farm manure (FM), press mud (PrM), and poultry manure (PM) on the growth, yield, and economics of wheat and rice crops grown with sewage water. The results showed that RHB increased wheat plant height (27%, 66%, 70%), spike-length (33%, 99%, 56%), straw yield (21%, 51%, 49%), and grain yield (42%, 63%, 65%) in year-1, year-2, and year-3, than respective controls. For rice crop, RHB showed the maximum increase in plant height (64%, 92%, 96%), spike length (55%, 95%, 90%), straw yield (34%, 53%, 55%), and grain yield (46%, 66%, 69%) each year (2019-2021), compared to their respective controls. The Cd immobilization was increased by the application of RHB while other treatments followed FM > PrM > PM > control in each year of wheat and rice crops. For year-1, benefit-cost ratio remained maximum with the application of FM while for the 2nd and 3rd years in sequence, RHB proved more economical than other treatments and consistently produced wheat and rice with lower Cd concentration than FM, PrM, and PM in grains. This long-term experiment suggested that the application of organic amendments consistently increased biomass of rice and wheat and decreased the Cd concentration in tissues. The RHB remained more effective compared with FM, PrM, and PM in terms of yield, low Cd accumulation and economics of rice and wheat crops.

Asunto(s)

RESUMEN

This study was set to investigate the effects of rice husk biochar (RHB) on soil characteristics and growth of lettuce (Lactuca sativa). A comprehensive research approach was employed to examine the effect of different RHB concentrations (i.e., 0-1.5%) on soil pH, soil enzyme activities (i.e., alkaline phosphatase, beta-glucosidase, and dehydrogenase), soil microbial community, lettuce growth, and earthworm toxicity. The results showed that, within the studied RHB concentration range, the RHB application did not have significant effects on the soil pH. However, the enzyme activities were increased with increasing RHB concentration after the 28 d-lettuce growth period. The RHB application also increased the abundances of the bacterial genera Massilia and Bacillus and fungal genus Trichocladium having the plant growth promoting abilities. Furthermore, the study revealed that the root weight and number of lettuce leaves were significantly increased in the presence of the RHB, and the growth was dependent on the RHB concentration. The improved lettuce growth can be explained by the changes in the enzyme and microbial dynamics, which have resulted from the increased nutrient availability with the RHB application. Additionally, the earthworm toxicity test indicated that the tested RHB concentrations can be safely applied to soil without any significant ecotoxicity. In conclusion, this study underscores the potential of RHB as a soil amendment with positive effects on crop growth, highlighting the utilization of agricultural byproducts to enhance soil biological quality and plant growth through biochar application.

Asunto(s)

RESUMEN

This work presented adsorption characteristics of tetracycline antibiotics (TCs) on KOH-functionalized rice husk biochar pyrolyzed at 700 °C (KBC700) and evaluation on phytotoxicity of TCs-adsorbed aqueous phase to seed germination. Specifically, KBC700 gained eightfold rise in specific surface area by KOH activation. Predominant monolayer chemisorption helped KBC700 control TCs, and spontaneous and exothermic features were identified by thermodynamic studies. KBC700 could efficiently work in a wide pH range (4.5 ~ 9.5), as well as in simulated eutrophic water and co-existing cationic solution. Humic acid exerted negative impact on TCs disposal. Outstanding regeneration capability and stability were also found during adsorption-desorption cycles. Mechanism discussion implied predominant pore filling and π-π interaction accompanied by hydrogen bonding and electrostatic interaction involved in TCs-removal process. Importantly, less phytotoxicity to seed germination was found in TCs-adsorbed aqueous phase. Collectively, these findings contribute to adsorption properties recognition and subsequent application for KOH-modified rice rusk biochar in environmental TCs remediation.

Asunto(s)

RESUMEN

Phytoliths are composed of 66 to 91% SiO2 and 1 to 6% organic carbon (C) known as phytolith occluded carbon (PhytOC). PhytOC is critical for long-term C storage in the agroecosystem. A field experiment was carried out to investigate the effect of three different sources of exogenous Si, i.e., diatomaceous earth (DE), silicic acid (SA) and rice husk biochar (RHB) on 1) plant phytolith, C content in phytolith and PhytOC content in different rice organs; 2) relationship between plant phytolith, C content in phytolith, PhytOC content, and soil properties (soil physicochemical properties and readily soluble silicon pools). Different Si sources produced significantly higher phytolith, PhytOC content, and readily soluble Si pools (CCSi, AASi, and ASi) than the control (RDF), with treatment receiving 4 t RHB ha-1 outperforming the other treatments. Phytolith and PhytOC production were found to be significantly correlated to soil organic carbon (OC), available nitrogen (N) and potassium (K), 0.01 M CaCl2 extractable Si (CCSi) and amorphous Si (ASi) content in the soil. Redundancy analysis showed that treatments receiving 4 t RHB ha-1 have a stronger relationship with the CCSi and ASi which majorly contributed to the higher phytolith and PhytOC production. Thus, practices such as Si fertilizers and RHB application have a high potential for phytolith production and PhytOC sequestration, a critical mechanism of the global biogeochemical C sink.

RESUMEN

With the acceleration of global industrialization, organic pollutants have become a threat to ecological safety and human health. This work prepared TiO2/rice husk biochar (TiO2/BC) for removal of bisphenol A (BA) micropollutant in wastewater. Experiment results revealed a low BA removal efficiency by TiO2/BC was observed at 34.5% under the dark environment. However, the removal rate of BA by UV light-assisted TiO2/BC significantly increased to 97.6% in 1 h. The results also demonstrated that the removal performance of BA using TiO2/BC was 2.1times higher than that of commercial TiO2 (46.4%). Besides, the removal efficiency of BA by reused TiO2/BC after eight cycles slightly decreased by 12.8%, demonstrating the excellent properties of the prepared composite. TiO2/BC also exhibited high removal efficiency of BA (over 89%) from the synthetic wastewater sample, indicating the potential utilization of composite for removing BA in wastewater. This work provides a new way to turn biomass waste into useful material and effective method to remove micropollutant BA.

RESUMEN

Biochar, a promising carbon-rich and carbon-negative material, can control water pollution, harness the synergy of sustainable development goals, and achieve circular economy. This study examined the performance feasibility of treating fluoride-contaminated surface and groundwater using raw and modified biochar synthesized from agricultural waste rice husk as problem-fixing renewable carbon-neutral material. Physicochemical characterizations of raw/modified biochars were investigated using FESEM-EDAX, FTIR, XRD, BET, CHSN, VSM, pHpzc, Zeta potential, and particle size analysis were analyzed to identify the surface morphology, functional groups, structural, and electrokinetic behavior. In fluoride (F-) cycling, performance feasibility was tested at various governing factors, contact time (0-120 min), initial F- levels (10-50 mg L-1), biochar dose (0.1-0.5 g L-1), pH (2-9), salt strengths (0-50 mM), temperatures (301-328 K), and various co-occurring ions. Results revealed that activated magnetic biochar (AMB) possessed higher adsorption capacity than raw biochar (RB) and activated biochar (AB) at pH 7. The results indicated that maximum F- removal (98.13%) was achieved using AMB at pH 7 for 10 mg L-1. Electrostatic attraction, ion exchange, pore fillings, and surface complexation govern F- removal mechanisms. Pseudo-second-order and Freundlich were the best fit kinetic and isotherm for F- sorption, respectively. Increased biochar dose drives an increase in active sites due to F- level gradient and mass transfer between biochar-fluoride interactions, which reported maximum mass transfer for AMB than RB and AB. Fluoride adsorption using AMB could be described through chemisorption processes at room temperature (301 K), though endothermic sorption follows the physisorption process. Fluoride removal efficiency reduced, from 67.70% to 53.23%, with increased salt concentrations from 0 to 50 mM NaCl solutions, respectively, due to increased hydrodynamic diameter. Biochar was used to treat natural fluoride-contaminated surface and groundwater in real-world problem-solving measures, showed removal efficiency of 91.20% and 95.61%, respectively, for 10 mg L-1 F- contamination, and has been performed multiple times after systematic adsorption-desorption experiments. Lastly, techno-economic analysis was analyzed for biochar synthesis and F- treatment performance costs. Overall, our results revealed worth output and concluded with recommendations for future research on F- adsorption using biochar.

Asunto(s)

RESUMEN

This study concentrated on the influence of rice husk biochar on the structural, thermal, flammable, and mechanical properties of recycled high-density polyethylene (HDPE). The percentage of rice husk biochar with recycled HDPE was varied between 10% and 40%, and the optimum percentages were found for the various properties. Mechanical characteristics were evaluated in terms of the tensile, flexural, and impact properties. Similarly, the flame retardancy of the composites was observed by means of horizontal and vertical burning tests (UL-94 tests), limited oxygen index, and cone calorimetry. The thermal properties were characterized using thermogravimetric analysis (TGA). For detailed characterization, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) tests were performed, to elaborate on the variation in properties. The composite with 30% rice husk biochar demonstrated the maximum increase in tensile and flexural strength, i.e., 24% and 19%, respectively, compared to the recycled HDPE, whereas the 40% composite showed a 22.5% decrease in impact strength. Thermogravimetric analysis revealed that the 40% rice husk biochar reinforced composite exhibited the best thermal stability, due to having the highest amount of biochar. In addition, the 40% composite also displayed the lowest burning rate in the horizontal burning test and the lowest V-1 rating in the vertical burning test. The 40% composite material also showed the highest limited oxygen index (LOI), whereas it had the lowest peak heat release rate (PHRR) value (52.40% reduced) and total heat release rate (THR) value (52.88% reduced) for cone calorimetry, when compared with the recycled HDPE. These tests proved that rice husk biochar is a significant additive for enhancing the mechanical, thermal, and fire-retardant properties of recycled HDPE.

RESUMEN

Rice husk biochar (RHB) is a low-cost and renewable resource that has been found to be highly effective for the remediation of water and soil environments. Its yield, structure, composition, and physicochemical properties can be modified by changing the parameters of the preparation process, such as the heating rate, pyrolysis temperature, and carrier gas flow rate. Additionally, its specific surface area and functional groups can be modified through physical, chemical, and biological means. Compared to biochar from other feedstocks, RHB performs poorly in solutions with coexisting metal, but can be modified for improved adsorption. In contaminated soils, RHB has been found to be effective in adsorbing heavy metals and organic matter, as well as reducing pollutant availability and enhancing crop growth by regulating soil properties and releasing beneficial elements. However, its effectiveness in complex environments remains uncertain, and further research is needed to fully understand its mechanisms and effectiveness in environmental remediation.

RESUMEN

Rice husk biochar (RHB) is a renewable agricultural waste, and its fixation on pavements helps develop environmentally friendly, economical, and sustainable asphalt pavements. This paper used RHB to replace part of styrene-butadiene-styrene (SBS) for the composite modification study of matrix asphalt. The high- and low-temperature properties and microscopic mechanisms of the composite-modified asphalt were studied through a series of tests. The results showed that, compared with SBS-modified asphalt, the softening point, viscosity, complex shear modulus, stiffness modulus, and rutting factors of RHB-SBS composite-modified asphalt were improved. In contrast, the ductility and creep rate were slightly decreased, indicating an improvement in the high-temperature performance of composite-modified asphalt, but a slight decrease in its low-temperature performance. The process of RHB and SBS composite modification was mainly physical blending, with only a small number of chemical reactions, and no new functional groups were generated. The porous structure of RHB enables it to adhere better to the network crosslinked continuous phase system formed by SBS and matrix asphalt. This results in composite-modified asphalt with good high-temperature storage stability and rheological properties. Therefore, RHB-SBS composite-modified asphalt can be applied to high-temperature areas and rice-producing areas, and the optimal content of RHB is suggested to be 15%.

RESUMEN

Soil petroleum pollution is an urgent problem in modern society, which seriously threatens the ecological balance and environmental safety. Aerobic composting technology is considered economically acceptable and technologically feasible for the soil remediation. In this study, the combined experiment of aerobic composting with the addition of biochar materials was conducted for the remediation of heavy oil-contaminated soil, and treatments with 0, 5, 10 and 15 wt% biochar dosages were labeled as CK, C5, C10 and C15, respectively. Conventional parameters (temperature, pH, NH4+-N and NO3--N) and enzyme activities (urease, cellulase, dehydrogenase and polyphenol oxidase) during the composting process were systematically investigated. Remediation performance and functional microbial community abundance were also characterized. According to experimental consequences, removal efficiencies of CK, C5, C10 and C15 were 48.0%, 68.1%, 72.0% and 73.9%, respectively. The comparison with abiotic treatments corroborated that biostimulation rather than adsorption effect was the main removal mechanism during the biochar-assisted composting process. Noteworthy, the biochar addition regulated the succession process of microbial community and increased the abundance of microorganisms related to petroleum degradation at the genus level. This work demonstrated that aerobic composting with biochar amendment would be a fascinating technology for petroleum-contaminated soil remediation.

Asunto(s)

RESUMEN

The release of industrial dyes into the environment has recently increased, resulting in harmful effects on people and ecosystems. In recent years, the use of adsorbents in photocatalytic nanocomposites has attracted significant interest due to their low cost, efficiency, and eco-friendly physical and chemical characteristics. Herein, Acid Orange 7 (AO7) removal was investigated by photocatalytic degradation using Rice Rusk Biochar (RHB), Tin (IV) Oxide (SnO2), and Iron Oxide (Fe3O4) as heterogeneous nanocomposite. After the preparation of RHB, the nanocomposite was synthesized and characterized using Field Emission Scanning Electron Microscope (FESEM), X-ray Powder Diffraction (XRD), Brunauer-Emmett-Teller (BET), and Fourier-Transform Infrared Spectroscopy (FT-IR). To optimize the elimination of AO7 by the One-Factor-At-a-Time (OFAT) method, effective parameters including mixing ratio (RHB:SnO2:Fe3O4), dye concentration, solution pH, and nanocomposite dose were studied. The results showed that the removal efficiency of AO7 after 120 min under the optimal mixing ratio of 1:1.5:0.6, dye concentration of 75 mg/l, solution pH of 4, and nanocomposite dose of 0.7 g/l was 92.37%. Moreover, Chemical Oxygen Demand (COD) and Total Organic Carbon (TOC) removal rates were obtained at 82.22 and 72.22%, respectively. The Average Oxidation State (AOS) and Carbon Oxidation State (COS) of the AO7 solution were increased after the process, indicating biodegradability improvement. Various scavenger effects were studied under optimal conditions, and the results revealed that O2- and H+ reactive species play a crucial role in the photocatalytic degradation of AO7. The reusability and stability of nanocomposite were tested in several consecutive experiments, and the degradation efficiency was reduced from 92 to 79% after five consecutive cycles. It is expected that this research contributes significantly to the utilization of agricultural waste in photocatalytic nanocomposites for the degradation of environmental pollutants.

Asunto(s)

RESUMEN

Maintaining humidification and inhibiting nitrogen losses during vermicomposting process have emerged to be key factors for high-quality productions. Previous data have showed outstanding functions of biochar addition in improving vermicomposting quality. In this study, the influence of bamboo biochar (BB) and rice husk biochar (RHB) addition on compost maturity, humification and nitrogen loss was evaluated in the vermicomposting of cattle manure and maize straw. Results revealed that BB or RHB amendment improved organic matter decomposition, enhanced humification and maturity of compost, particularly in the 10% BB treatment, which exerted the highest humic acids content and GI value. Furthermore, BB or RHB addition significantly reduced nitrogen losses, in which the volatilization of NH3 and N2O were reduced by 24.93%-66.23% and 14.91%-55.12%. The fewest nitrogen loss was detected in the treatment of 10% BB. Biochar inhibited nirK, nirS but promoted AOB-amoA, nosZ expression; fewer N2O producing bacteria (Pseudomonas, Devosia, Luteimonas genus) were observed in the biochar treatment, and thereby decreased the N2O emission. Therefore, 10% BB addition for co-vermicomposting cattle manure and maize straw is an efficient way to increase humification, maturity, and reduce nitrogen loss, and future applications following this strategy is believed to generate better productions.

Asunto(s)

RESUMEN

Nitrogen-rich materials such as poultry litter (PL) contributes to substantial N and C loss in the form of ammonia (NH3) and carbon dioxide (CO2) during composting. Biochar can act as a sorbent of ammonia (NH3) and CO2 emission released during co-composting. Thus, co-composting poultry litter with rice husk biochar as a bulking agent is a good technique to mitigate NH3 volatilization and CO2 emission. A study was conducted to evaluate the effects of composting the mixtures of poultry litter with rice husk biochar at different ratios on NH3 and CO2 emissions. Four mixtures of poultry litter and rice husk biochar at different rate were composted at 0:1, 0.5:1, 1.3:1 and 2.3:1 ratio of rice husk biochar (RHB): poultry litter (PL) on a dry weight basis to achieve a suitable C/N ratio of 15, 20, 25, and 30, respectively. The results show that composting poultry litter with rice husk biochar can accelerate the breakdown of organic matter, thereby shortening the thermophilic phase compared to composting using poultry litter alone. There was a significant reduction in the cumulative NH3 emissions, which accounted for 78.38%, 94.60%, and 97.30%, for each C/N ratio of 20, 25, and 30. The total nitrogen (TN) retained relative was 75.96%, 85.61%, 90.24%, and 87.89% for each C/N ratio of 15, 20, 25, and 30 at the completion of composting. Total carbon dioxide lost was 5.64%, 6.62%, 8.91%, and 14.54%, for each C/N ratio of 15, 20, 21, and 30. In addition, the total carbon (TC) retained were 66.60%, 72.56%, 77.39%, and 85.29% for 15, 20, 25, and 30 C/N ratios and shows significant difference as compared with the initial reading of TC of the compost mixtures. In conclusion, mixing and composting rice husk biochar in poultry litter with C/N ratio of 25 helps in reducing the NH3 volatilization and CO2 emissions, while reducing the overall operational costs of waste disposal by shortening the composting time alongside nitrogen conservation and carbon sequestration. In formulating the compost mixture with rice husk biochar, the contribution of C and N from the biochar can be neglected in the determination of C/N ratio to predict the rate of mineralization in the compost because biochar has characteristic of being quite inert and recalcitrant in nature.

Asunto(s)

RESUMEN

This study attempted to investigate the adsorptive potential of blended bamboo (Oxytenanthera abyssinica) sawdust/rice husk (BSD/RH) at a ratio of 1:1 carbonized at 400 °C for the sorption of cadmium ions from synthetic solutions in batch mode. The Box-Behnken Design in response surface methodology (RSM) was used to achieve the best removal efficiency and adsorption capacity of the biochar. With a p-value of 0.0001, the initial Cd2+ concentration and adsorbent dose were discovered to be the most significant parameters controlling the adsorption capacity and removal efficiency of Cd2+ from the solution. At a pH of 8.95, ionic strength of 0.020 mol/L KNO3, a contact time of 15 min, an initial concentration of 200 mg/L, and an adsorbent dose of 0.5 g, the optimum Cd2+ removal and adsorption capacity of 99.97% and 358.65 mg/g, respectively, were obtained. The optimized conditions were later used to determine the removal efficiency and adsorption capacity of pristine biochars of rice husk and bamboo sawdust, which were found to be 79.8% and 83.7%, respectively. This finding indicates the potential for using biosorbent derived from blended feedstock materials to remove heavy metals such as cadmium.

Many studies investigated the pollutant removal potential of agricultural wastes as single feedstock adsorbent materials. The novel aspect of this study is that it examines their potentials on Cd²⁺ removal by combining two feedstocks (bamboo saw dust and rice husk) while optimizing the common influencing factors. Furthermore, a comparative analytical study was carried out between the blended feedstock biochar and their respective pristine ones. According to the findings, using blended biochar instead of pristine biochar results in a significant increase in Cd removal efficiency.

Asunto(s)

RESUMEN

Biochar has been applied to increased soil nutrients, especially C. In RCBD, control fresh water (CFW), sewage wastewater (SWW), NPK fertilizer, rice husk biochar (RHB), and NPK + RHB treatments were arranged with four replications. Soil chemical properties, dry-stable aggregate fractions [4.75-2.00 (Lma), 1.00-2.00 (Mma), 0.25-1.00 (Sma), and < 0.25 mm (Mia)], and aggregate total carbon (TC) and total nitrogen (TN) concentrations were evaluated over a 4-year period with repeated treatment additions in a vegetable-based rotation system. Soils amended with RHB, NPK and NPK + RHB showed slight acidification but no significant change in exchangeable cation content. The concentration of TC increased with NPK + RHB, NPK and RHB, while TN and available P increased with NPK and NPK + RHB treatments. The SWW increased soil pH and Na+ but decreased K+ concentration. Reapplication of SWW and NPK + RHB resulted in an increase in Lma formation by 28 % and 29 %, and MWD by 19 % and 21 %, respectively. The NPK and NPK + RHB treatments increased TC and TN in all aggregate fractions, while RHB only increased TC in macro-aggregates (4.75-0.25 mm) and TN in Sma. The increase in aggregate TC concentration was approximately 1.50-2.00 folds greater with NPK + RHB than with NPK and RHB treatments. Although the TC concentration was highest in both Mma and Sma fractions with the NPK + RHB treatment, the greater association of Lma (44 %) and Mma (31 %) with soil TC content may significantly affect the soil sustainability. The TC in Mma fraction was reflected in MWD (r = 0.53*, P = 0.05). Reapplication of RHB had limited potential for C and N sequestration in soil aggregates, but its combination with NPK produced a superior response in soil nutrients retention, soil structural stability, and TC and TN sequestration potential in micro- and macro- aggregate fractions. Therefore, NPK + RHB treatment is best suited for the sustainable management of the study and similar soils.

RESUMEN

The aim of this study was to assess the total concentration and speciation variation of heavy metals (Pb, Cd, Cu and Zn) during composting and vermicomposting of industrial sludge with different addition rations of rice husk biochar. Results indicated that pH, EC, total phosphorus (TP) and total potassium (TK) were increased and total organic carbon (TOC) and total nitrogen (TN) were decreased during the composting of industrial sludge with biochar compared with the control (sludge without biochar). The addition of earthworm to the biochar-amended sludge further decreased pH and TOC but highly enhanced the EC, TN, TP and TK. Comparatively lower concentrations of total and DTPA-extractable heavy metals were observed in biochar-amended sludge treatments mixed with earthworm in comparison with the biochar-amended sludge treatments without earthworm or the control. Sequential extraction methods demonstrated that vermicomposting of sludge with biochar converted more metals bound with exchangeable, carbonate and organic matter into the residual fraction in comparison with those composting treatments of sludge with biochar. As a result, the combination of rice husk biochar and earthworm accelerated the passivation of heavy metals in industrial sludge during vermicomposting. Rice husk biochar and earthworm can play a positive role in sequestering the metals during the treatment of industrial sludge. This research proposed a potential method to dispose the heavy metals in industrial sludge to transform waste into resource utilization.

Asunto(s)

RESUMEN

Soil pollution caused by petroleum pollutants from production trade activities in petroleum-related factories contributes serious threat to the environment and human health. Composting is technically-feasible and cost-effective in the biodegradation of heavy oil pollutants. This composting experiment was developed with four rice husk biochar (RHB) concentrations of 0 wt% (CK), 5 wt% (S1), 10 wt% (S2) and 15 wt% (S3) for the degradation of heavy oil. The results showed that RHB amendment could strengthen the degradation performance of heavy oil, and the degradation efficiencies for CK, S1, S2 and S3 were 59.67%, 65.00%, 73.29% and 74.82%, respectively. Microbial community succession process was investigated through high-throughput sequencing technology, and the RHB addition regulated bacterial community succession and further effectively facilitated the biodegradation of heavy oil in composting. This study substantiated that biochar materials-amended aerobic composting would be a promising strategy for the biodegradation of petroleum pollutants.

Asunto(s)