RESUMEN

Background Restorative dentists frequently deal with the prosthesis coming loose after placing multiple crowns. The luting cement holds indirect restorations to the prepared tooth. However, the success of the restorations is impacted by mastication pressures and other undesired factors. Therefore, escape is required to increase the crown's life. Mechanical locking of the prepared tooth surface is one technique to address this issue, in addition to cement adherence, to extend the life of the restoration. Aims and objective The objective of the study was to evaluate the influence of surface roughness of prepared teeth on the retention of metal crowns. Methodology This in-vitro investigation was carried out on freshly extracted maxillary first premolars that were defect-free and had the same crown size. Using multiple grifts of varied coarseness, different surface roughness was created, allowing for the observation of an important factor like retention (black at 180-250 µm [micrometer], blue at 125-150 µm, green at 106-125 µm, red at 53-63 µm, yellow at 20-30 µm). Results IBM Corp. Released 2011. IBM SPSS Statistics for Windows, Version 20.0. Armonk, NY: IBM Corp. was used to perform the statistical analysis. Compounds were done before it began to guarantee that the study would have 80% power. There is a mean and a standard deviation for each quantitative variable. A one-way ANOVA was used for quantitative variables, and Tukey's post hoc analysis was conducted afterward. A probability value of less than 0.05 was used to determine statistical significance. According to the statistical findings, the prosthesis's retentive qualities improve as coarseness increases. Conclusion The resistance and retention form of the preparation is critical to the longevity of the prosthesis, based on the findings of the previously described study. Surface roughness, pins, slots, grooves, and other preparation modifications can enhance retention on the prepared tooth surface. The research findings indicate no need to polish the prepared tooth surface.

RESUMEN

Background: This study looks at the clinical applications of nanotechnology in dentistry, with an emphasis on implantology, preventive care, orthodontics, restorative dentistry, and endodontics. Methods: Following PRISMA criteria and registered in PROSPERO (ID: CRD 564245), a PubMed, Scopus, and Web of Science search was conducted for studies from January 2014 to April 2024. The criteria were English-language research on nanotechnology in dental coatings, with a focus on clinical trials and observational studies. The electronic database search yielded 8881 publications. Following the screening process, 17 records were selected for qualitative analysis. Results: Nanotechnology has revolutionized dentistry. In orthodontics, nanoparticles improve antibacterial characteristics, durability, and biocompatibility, lowering bacterial colonization and plaque. In preventative care, Casein Phosphopeptide-Amorphous Calcium Phosphate (CPP-ACP) combined with stannous fluoride (SnF2) and nano-sized sodium trimetaphosphate (TMPnano) substantially remineralizes enamel. Nanostructured surfaces in dental implants, particularly those containing calcium, improve osseointegration and stability. Nanoparticles in restorative dentistry improve composite and adhesive strength, aesthetics, and longevity. Conclusions: Nanotechnology improves dental materials and equipment, resulting in better treatment outcomes and increased patient comfort. Its integration provides more effective treatments, which improves dental care and patient outcomes. More research is needed to overcome present problems and expand nanotechnology's medicinal applications.

RESUMEN

Objectives: To evaluate the efficacy of CariSolv gel with respect to chemo-mechanical caries removal in primary molar teeth. METHODS: The cross-sectional study was conducted at the Department of Paediatric Dentistry, Bakhtawar Amin Dental College and Hospital, Multan, Pakistan, from July to December 2022, and comprised patients of either gender aged 6-12 years having vital, primary molar teeth with clinical and radiographic evidence of carious lesion. Freshly prepared CariSolv gel 0.2 ml to 1.0ml was applied to carious dentine for a minimum of 30 seconds, using chemo-mechanical caries removal hand instruments. The cavity preparation was rinsed and dried. Image caries detector dye was applied by micro brush for 10 seconds. After the cavity preparation was washed and dried, any red-stained dentine indicated residual infected dentine. A maximum of 3 chemo-mechanical caries removal cycles were allowed. Data was analysed using SPSS 26.0. RESULTS: Of the 134 patients, 74(55.2%) were boys and 60(44.8%) were girls. The overall mean age was 8.55±1.58 years. The procedure was successful in 115(85.8%) cases. Age and gender were not significantly associated with the outcome (p>0.05). CONCLUSIONS: Chemo-mechanical caries removal method using CariSolv gel was found to be a viable alternative to traditional drilling techniques for caries removal in primary molar teeth.

Asunto(s)

RESUMEN

No study has examined the simultaneous effect of facial forms, midline deviations and midline angulations on facial beauty. Therefore, this comprehensive study aimed to evaluate these and many other hypotheses. This psychometric study was performed on 15,042 observations. A female frontal photograph was edited to 45 perceptometric images with controlled anatomical alteration: 3 facial forms (euryprosopic [brachyfacial], mesoprosopic [mesofacial], leptoprosopic [dolichofacial]), each having either 9 bidirectional midline deviations (0, 1, 2, 3, and 4 mm deviated to the left and right) or 7 bidirectional midline angular deviations (0°, 5°, 10°, and 15° deviated to the left and right). One of the photographs were repeated. These 46 images were esthetically judged by 327 participants (243 laypeople, 49 orthodontists, and 35 'prosthodontists or restorative dentists'). Hierarchical mixed-model multiple linear regressions and post hoc tests were adopted to evaluate the simultaneous impacts of the photomodel's facial forms, midline deviations to the right or left, and midline rolls to the right or left plus sex, age, experience, and dental specialty of the referees on their perception of facial beauty as well as the tolerable zones of midline alterations. These were also done separately for each specialty group, and also for each facial face. Ideal combinations of anatomic features were determined using repeated-measures ANOVAs. Differences between esthetic preferences of different groups in terms of each image were assessed using one-way ANOVAs and t-tests (α = 0.05, α = 0.008, α = 0.001). All 5 anatomical features significantly and independently influenced perception of facial beauty. The tolerance threshold for midline deviations was 1 mm deviations to the right and left sides. For midline rolls, the only tolerable form was the no-roll ('on') midline; the judges preferred right-oriented defects over left-sided ones. The most beautiful facial form was mesoprosopic, followed by leptoprosopic. Men perceived the female face slightly more attractive than did women. The viewers' specialty (or lack of it), their age, or their experience did not affect their esthetic preferences. Predictors of esthetic preferences were all 5 anatomical features plus views' sex, but not their dental specialty, age, or experience. Zones of acceptability and also the ideal range of anatomical features were determined.

Asunto(s)

RESUMEN

Restaurações diretas em resina composta são amplamente utilizadas em odontologia para restaurar dentes posteriores. Todavia, quando há grande destruição coronária, onde a distância do istmo excede dois terços da distância intercuspídea, as restaurações indiretas em resina composta são indicadas. O presente estudo teve como objetivo relatar a análise de um prontuário de um paciente que recebeu uma restauração indireta em resina composta em dente posterior amplamente destruído. Através da análise de prontuários de pacientes atendidos nas disciplinas de Estágios Supervisionados do Curso de Odontologia da FSG Centro Universitário no ano de 2023, foi selecionado um prontuário de um paciente que compareceu a clínica odontológica da FSG com uma restauração em amálgama fraturada com reparo em resina composta que apresentou sintomatologia dolorosa. O procedimento diagnóstico ocorreu através de exame clínico e radiográfico, que constatou a indicação de substituição da restauração insatisfatória e realização de uma restauração indireta em resina composta. Os resultados estéticos e funcionais apresentados demostraram a viabilidade da técnica restauradora indireta em resina composta para reabilitar dentes posteriores com ampla destruição coronária(AU)

Direct composite resin restoration are widely used in dentistry to restore posterior teeth. However, when there is large coronary destruction, that the distance from the isthmus exceeds two- thirds of the intercuspal distance, indirect composite resin restorations are indicated. This study aimed to report the analysis of a dental record of a patient who received an indirect restoration in composite resin in a badly destroyed posterior tooth. Through the analysis of dental records of patients seen in the disciplines of Supervised Internship of the Dentistry Course at FSG Centro Universitário in the year 2023, the dental record of a patient who attended the FSG dental clinic with fractured amalgam restoration with composite resin repair was selected who had painful symptoms. The diagnostic procedure took place through clinical and radiographic examination, which revealed the indication of replacing the unsatisfactory restoration and carrying out an indirect restoration in composite resin.The aesthetic and functional results presented demonstrated the viability of the indirect composite resin restoration technique for rehabilitating posterior teeth with extensive coronal destruction(AU)

Asunto(s)

RESUMEN

AIM: The objective of the present study was to investigate the association between the anatomical characteristics of different tooth groups and the diffusion and bleaching effect of hydrogen peroxide (H2O2). MATERIALS AND METHODS: Computed tomography (CT) images from five patients were used to assess the hard tissue thickness and pulp volume (PV) of four tooth groups: lower (mandibular) incisors (LI), upper (maxillary) incisors (UI), canines (C), and premolars (PM). Additionally, 80 bovine tooth disks were divided into four groups (n = 20) to match the thickness of each tooth group studied. All the specimens were exposed to a 35% H2O2 bleaching gel, with 50 µL applied for 45 min during the first, second, and third sessions. Diffusion was evaluated using the peroxidase enzyme method. Color change analyses (∆E, ∆E00, and ∆WID) were performed after the three application sessions and 7 days after the bleaching treatment using a spectrophotometer. RESULTS: The PM group showed greater thickness and PV, followed by the C, UI, and LI groups (P 0.001). The LI group had six times greater H2O2 diffusion compared with the PM group (P 0.001), while the PM group exhibited a PV nine times larger than the LI group. Furthermore, the LI and UI groups achieved color saturation with one fewer session than the C and PM groups. CONCLUSIONS: Specific tooth groups have anatomical characteristics that interfere with bleaching treatment in terms of the diffusion and whitening effect of H2O2. Furthermore, the diffusion capacity of H2O2 was inversely proportional to the thickness of the tooth groups.

Asunto(s)

RESUMEN

Objectives: To determine which components in a new restorative material (Renewal MI) improve its ability to form resin tags within demineralized dentine. Methods: Varied components included polylysine (PLS), monocalcium phosphate (MCP), powder to liquid ratio (PLR), 4-methacryloyloxyethyl trimellitate anhydride (4META), and polypropylene glycol dimethacrylate (PPGDMA). Urethane dimethacrylate (UDMA), containing PPGDMA (24 wt%) and 4META (3 wt%), was mixed with glass filler with MCP (8 wt%) and PLS (5 wt%). PLR was 3:1 or 5:1. Reducing MCP and/or PLS to 4 and 2 wt% respectively or fully removing MCP, PLS, 4META or PPGDMA gave 16 formulations in total. Renewal MI, Z250 (with or without Scotchbond Universal adhesive) and Activa were used as commercial comparators. Collagen discs were obtained by totally demineralizing 2 mm thick, human, premolar, coronal dentine discs by immersion in formic acid (4M) for 48 h. The restorative materials were then applied on top (n = 3), before dissolving the collagen in sodium hypochlorite (15%). SEM/EDX was employed to determine resin tags length, composition, and surface coverage. Results: Tags were >400, 20 and 200 µm and covered 62, 55 and 39% of the adhesion interface for Renewal MI, Scotchbond and Activa, respectively. With experimental formulations, they were 200 and >400 µm long with high vs. low PLR and composed primarily of polymerized monomers. Percentages of the adhesion interface covered varied between 35 and 84%. Reducing PLS or MCP caused a decline in coverage that was linear with their concentrations. Reducing MCP had lesser effect when PLS or PLR were low. Removal of 4META caused a greater reduction in coverage than PPGDMA removal. Conclusion: PLS, MCP, 4META, PPGDMA and low PLR together enhance Renewal MI tags formation in, and thereby sealing of, demineralized dentine.

RESUMEN

PURPOSE: The main aim of the present study was to carry out a scoping review on the differences in degree of conversion of monomers regarding several types resin cements, indirect restorative materials, and light-curing procedures used in dentistry. METHOD: A bibliographic review was performed on PubMed using the following search items: "degree of conversion" OR "filler" AND "resin cement" OR "inorganic cement" AND "organic" OR "radiopacity" OR "refractive" OR "transmittance" OR "type" AND "resin composite." The search involved articles published in English language within the last thirteen years. A research question has been formulated following the PICO approach as follow: "How different is the degree of conversion of monomers comparing several types of resin-matrix cements?". RESULTS: Within the 15 selected studies, 8 studies reported a high degree of conversion (DC) of the organic matrix ranging from 70 up to 90% while 7 studies showed lower DC values. Dual-cured resin-matrix cements revealed the highest mean values of DC, flexural strength, and hardness when compared with light- and self-polymerized ones. DC mean values of resin-matrix cements light-cured through a ceramic veneer with 0.4 mm thickness were higher (~ 83%) than those recorded for resin-matrix cements light-cured through a thicker ceramic layer of 1.5 mm (~ 77%). CONCLUSIONS: The highest percentage of degree of conversion of monomers was reported for dual-cured resin-matrix cements and therefore both chemical and light-induced pathways promoted an enhanced polymerization of the material. Similar degree of conversion of the same resin-matrix cement were recorded when the prosthetic structure showed a low thickness. On thick prosthetic structures, translucent materials are required to allow the light transmission achieving the resin-matrix cement. CLINICAL RELEVANCE: The chemical composition of resin-matrix cements and the light-curing mode can affect the polymerization of the organic matrix. Thus, physical properties of the materials can vary leading to early clinical failures at restorative interfaces. Thus, the analysis of the polymerization pathways of resin-matrix cements is significantly beneficial for the clinical performance of the restorative interfaces.

Asunto(s)

RESUMEN

Aim: This study aimed to evaluate dental esthetic screening index (DESI) Intraoral component scores among patients attending Qassim University dental clinics and the factors affecting these scores. Materials and methods: This was a retrospective study that included 150 participants aged 18 years or older with full upper and lower anterior dentitions. Standardized intraoral frontal photographs of the patients' upper and lower dentitions were acquired from their dental records, and the mean rank DESI intraoral scores were evaluated and compared across the demographic and dental characteristics of the study patients.The mean age of the patients sampled was 33.56; 57 % were female and 43 % were male. The mean DESI Intraoral score was 15.33. DESI scores were significantly higher in patients older than 35 years compared with subjects 35 years old or younger (p = 0.015). DESI scores were increased in patients who had anterior restorations compared with those who did not (p = 0.016). Conclusions: This was the first study of its kind to use the DESI in a large clinical setting. According to the DESI, most patients attending Qassim University dental clinics had good dentofacial aesthetics. Age and the presence of anterior restorations negatively impacted patients' dentofacial aesthetics. Sex, the nature of the chief complaint, a history of orthodontic treatments, and teeth bleaching did not affect the DESI scores.

RESUMEN

Background Glass ionomer cement (GIC) serves as a crucial biomaterial in dental restoration, offering applications in filling, lining, and adhesive procedures. Nevertheless, its mechanical properties often fall short, particularly in regions subjected to considerable stress. To address this issue, zirconia nanoparticles are incorporated at specific levels. Aim To assess the antimicrobial efficacy and compressive resilience of GIC modified with zirconia nanoparticles synthesized through green synthesis methods. Material and methods Zirconia nanoparticles were synthesized via a green method utilizing aloe vera extract in solvent form. These nanoparticles were then mixed into GIC at different concentration levels. Group I incorporated zirconia nanoparticles at a concentration of 3%, Group II at 5%, and Group III at 10%, while Group IV was the control, consisting of traditional GIC. Following that, samples were prepared and underwent characterization through various analytical techniques. The ability to inhibit microbial growth and the compressive resilience of the groups were examined. Microbial inhibition against the bacterial strains was assessed through minimum inhibitory concentration (MIC), and the ability to withstand compression was gauged by measuring the maximum force the specimen could endure before fracturing. Data underwent analysis with Statistical Package for the Social Sciences (IBM SPSS Statistics for Windows, IBM Corp., Version 24.0, Armonk, NY). Repeated measures of analysis of variance (ANOVA) were utilized to gauge average MIC values and compressive strength. Following this, Tukey's post hoc test was employed for pairwise comparisons. Results The findings indicated, incorporating zirconia nanoparticles into GIC led to an improvement in its antimicrobial effectiveness, with a noticeable enhancement observed as the weight percent (% wt) of the additive increased. This improvement was notably noticeable in its effectiveness against Streptococcus mutans and Lactobacillus, exceeding that of the control with a noteworthy distinction. Furthermore, there were significant enhancements in compressive strength, in Group I (180.48 ± 1.02), Group II (191.25 ± 0.52), and Group III (197.52 ± 0.75), compared to Group IV (167.22 ± 1.235), with significant disparities (p < 0.05). Conclusion The research illustrates that introducing green-synthesized zirconia nanoparticles into GIC leads to heightened bactericidal potency and compressive resilience when contrasted with the control group (Group IV). Notably, the highest concentration of 10% demonstrated the most favourable antimicrobial attributes alongside enhanced strength. Consequently, integrating green-synthesized zirconia nanoparticles into GIC holds potential as a proficient material. In future studies, there should be an exploration of molecular chemistry and bonding mechanisms to enhance our comprehension of its capabilities.

RESUMEN

This report describes multidisciplinary care combining orthodontics and restorative dentistry for a patient with Class II occlusion and stained mandibular and maxillary resin composite veneers. The orthodontic treatment improved severe overjet and malocclusion prior to restorative care. Occlusal assessment was provided with a novel digital device (PlaneSystem, Zirkonzahn) that is integrated with digital workflows for the evaluation of the occlusal plane and condylar path inclination. Diagnostic digital impressions and digital wax-up for intraoral mock-ups led to the patient's treatment acceptance. Minimally invasive tooth preparation, final digital impressions, and bonding under dental dam isolation fulfilled the patient's esthetic and functional demands with all-ceramic restorations.

RESUMEN

Dental composites are gaining great popularity in restorative dentistry because of their aesthetic appeal and capacity to replicate the natural color of teeth. Nevertheless, their lifespan and durability rely on various factors, such as the polishing technique and the environmental conditions they are exposed to. The study aimed to assess the influence of the method of final polishing of dental composite on the surface roughness and microhardness of materials also considering the environment of different pHs. Disc-shaped samples (5 mm diameter and 2 mm thickness) have been prepared for microhardness and roughness tests from two dental composites: A2 Clearfil Majesty ES 2 Classic and A2D Clearfil Majesty Premium. One-third of samples were polished with polishing discs, OptiDisc, another one-third of samples were polished with Eve Diacomp Twist rubbers and polishing brush with diamond particles, and rest of the samples were stored without any polishing (the control group). Tested materials were incubated in distilled water or acidic buffer (pH = 2) for 3 weeks at a temperature of 37 °C. No statistically significant differences were found for roughness for the two materials tested after incubation in liquids. A decrease in Vicker microhardness was found for Clearfil Majesty ES 2 Classic after soaking in a low pH liquid, and no such relationship was found for Clearfil Majesty Premium. The improved resistance of these materials to the negative oral environment may result in the longer survival of composite restorations in patients with poor diet or diseases, causing a decrease in oral pH.

RESUMEN

Artificial intelligence (AI) is increasingly prevalent in biomedical and industrial development, capturing the interest of dental professionals and patients. Its potential to improve the accuracy and speed of dental procedures is set to revolutionize dental care. The use of AI in computer-aided design/computer-aided manufacturing (CAD/CAM) within the restorative dental and material science fields offers numerous benefits, providing a new dimension to these practices. This study aims to provide a concise overview of the implementation of AI-powered technologies in CAD/CAM restorative dental procedures and materials. A comprehensive literature search was conducted using keywords from 2000 to 2023 to obtain pertinent information. This method was implemented to guarantee a thorough investigation of the subject matter. Keywords included; "Artificial Intelligence", "Machine Learning", "Neural Networks", "Virtual Reality", "Digital Dentistry", "CAD/CAM", and "Restorative Dentistry". Artificial intelligence in digital restorative dentistry has proven to be highly beneficial in various dental CAD/CAM applications. It helps in automating and incorporating esthetic factors, occlusal schemes, and previous practitioners' CAD choices in fabricating dental restorations. AI can also predict the debonding risk of CAD/CAM restorations and the compositional effects on the mechanical properties of its materials. Continuous enhancements are being made to overcome its limitations and open new possibilities for future developments in this field.

Asunto(s)

RESUMEN

In recent years, significant advancements in dental and periodontal diagnostics have paved the way for improved care. Among the available approaches, laser fluorescence (LF) is a promising method. This case report explores the utilization of a 405 nm diode laser as a diagnostic tool in the non-surgical treatment of biofilm-induced gingivitis, as well as its application in routine daily practice for diagnosing restorations and dental caries. A 24-year-old male patient and a 21-year-old female patient were included. A 405 nm diode laser (Smart M, Lasotronix, Poland) was used as a diagnostic tool with a tip diameter of 8 mm. In case one, the utilization of the 405 nm diode laser enhanced the patient's ability to perceive the presence and extent of plaque and calculus, aiding in motivation and education regarding supra-gingival dental biofilm control and it assisted the operator in precisely localizing plaque and calculus, thereby enabling more effective mechanical debridement and ultimately improving treatment outcomes. In the second case, the utilization of the laser facilitated the detection of defective composite fillings aiding in both accurate diagnosis for the operator and effective communication with the patient regarding the need for re-treatment. This study illustrates the potential of the relatively new 405 nm diode laser as a promising diagnostic tool in the daily management of periodontal patients and the detection of defective dental fillings in daily practice.

RESUMEN

Aims: This study aims to comprehensively examine the surface morphology of fiber posts after undergoing various disinfection methods, utilizing scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Materials and Methods: Twenty-one fiber posts were randomly allocated into seven experimental groups, each consisting of three samples. The disinfection methods employed were as follows: GC - no disinfection treatment; GAL - immersion in 70% alcohol, following the manufacturer's recommended protocol; GHP - soaking in 2.5% sodium hypochlorite for a duration of 10 minutes; GCL - soaking in 2% chlorhexidine gluconate for a period of five minutes; GAC - 30-second etching with 35% phosphoric acid; GPH - soaking in 10% hydrogen peroxide for a duration of 20 minutes; and GSL - autoclave sterilization. Following the disinfection procedures, SEM was employed to scrutinize the surface topography of the posts, while EDX was utilized to identify the chemical elements present on the sample surfaces. Subsequently, a descriptive analysis was conducted on the SEM images and EDX data. Results: SEM analysis revealed that all groups exhibited regions with epoxy resin-coated fibers alongside sections with exposed glass fibers. Analysis of the EDX data indicated that there were no significant differences in the predominant chemical elements across the groups. Carbon (C) and oxygen (O) registered the highest peaks, followed by silicon (Si), zirconium (Zr), sodium (Na), aluminum (Al), and calcium (Ca). Conclusions: The disinfection methods under investigation did not induce substantial alterations in the surface morphology of the fiber posts.

RESUMEN

AIM: Over-the-counter teeth-whitening products have become popular in accordance with the increasing demands of patients. These products can also be recommended to patients by dentists. The aim was to determine the rates of recommendation of over-the-counter teeth whitening products by dentists in Turkey divided into different categories for their patients and to interpret them based on a cause-and-effect relationship. MATERIAL AND METHODS: After obtaining ethics committee approval, the survey questions were created using Google Forms (Google Inc., Mountainview, CA) and delivered to dentists via social media. Dentists who signed the informed consent form completed the survey. Within the study's scope, statistical analyses were conducted using IBM SPSS Statistics for Windows, version 26.0 (IBM Corp., Armonk, NY). Values were expressed as frequency (n) and percentage (%). A chi-square test was used to compare participants' teeth-whitening recommendations according to their demographic characteristics. The statistical significance level was accepted as p <0.05 throughout the study. RESULTS: A total of 57.9% of dentists working in Turkey did not recommend over-the-counter teeth-whitening products to their patients. When the answers to the question "Which whitening products sold on the market do you recommend to your patients?" were compared according to the participants' place of work, there was a statistically significant difference between the place of work and the recommended whitening product (p <0.05). Participants working in the private sector answered "I do not recommend" at a higher rate than participants working in the public sector. Among those who recommended toothpaste, more dentists with five or fewer years of experience recommended toothpaste to their patients than dentists with greater than five years of experience. Additionally, more dentists working in the public sector recommended toothpaste to their patients than dentists working in the private sector, and more specialist dentists recommended toothpaste to their patients than general practitioner dentists. CONCLUSION: Most dentists in Turkey do not recommend over-the-counter teeth-whitening products to their patients. Among those who recommend such products, toothpaste has been determined to be the first choice. The results of this study may raise awareness among dentists about over-the-counter teeth-whitening products and encourage new studies.

RESUMEN

INTRODUCTION: Dental caries in primary teeth remains a critical public health challenge globally. Although fluoride toothpaste is the standard care for remineralization, its efficacy is limited by the requirement for bioavailable calcium and phosphate ions and its diminished performance on irregular dental surfaces. This study evaluates natural alternatives for dental care, focusing on their mineralizing potential compared to fluoride. AIM: This study aims to assess and compare the efficacy of remineralization by flaxseed paste and chicken eggshell paste to that of standard fluoride toothpaste on artificially demineralized primary teeth. MATERIALS AND METHODS: We utilized an in vitro model, creating standardized white spot lesions on extracted primary teeth to simulate early carious lesions. The teeth were treated with preparations of flaxseed paste, chicken eggshell paste, and fluoride toothpaste. Remineralization was quantitatively analyzed using scanning electron microscopy-energy dispersive x-ray analysis (SEM-EDX) conducted with a high-resolution scanning electron microscope (HRSEM) from Thermoscientific Apreo S at Sir C V Raman Research Park, SRM Institute of Science & Technology, Kattankulathur, Chennai, Tamil Nadu. RESULTS: Quantitative analysis revealed that both flaxseed and chicken eggshell pastes not only met but, in some cases, exceeded the remineralization performance of fluoride toothpaste. Significant differences were observed in the deposition of calcium and phosphate ions on the lesion surfaces. CONCLUSION: The study conducted at the Department of Pediatric and Preventive Dentistry at SRM Dental College, Kattankulathur, confirms the potential of flaxseed and chicken eggshell pastes as viable, cost-effective, and accessible alternatives to fluoride toothpaste for the remineralization of enamel in primary teeth. These findings support the inclusion of these natural agents in oral hygiene regimens and underscore the importance of further research into holistic approaches for the prevention and treatment of dental caries in children.

RESUMEN

BACKGROUND: Occlusal contacts can be stained and thereby visualised employing occlusal indicators. Qualitative and quantitative indicators are differentiated. The hybrid system OccluSense supposedly combines analogue contact marking and digital registration of contacts. The reliability and validity of its contact marking have not yet been validated. OBJECTIVES: The aim of this controlled randomised in-vitro study was to examine the reliability and validity of analogue contact staining with OccluSense compared to Arti-Fol and the reference standard Gnatho-Film. MATERIALS AND METHODS: An experimental apparatus was designed to simulate static occlusion. The occlusal contacts were stained 50 times with Gnatho-Film to determine the average number and location of contacts registered. For comparison, the contacts were pre-stained with Gnatho-Film and then registered with Arti-Fol or OccluSense 50 times each. Every staining was statistically evaluated and compared to Gnatho-Film alone, regarding the number and location of contacts. Based on the observed characteristic staining behaviour of OccluSense, a modified evaluation strategy was developed for its colour markings (OccluSense (mod.)). RESULTS: Both evaluations of OccluSense determine that the same number of contacts was registered in over 94% of all cases. Neither OccluSense nor Arti-Fol stain the exact same number of contacts as Gnatho-Film, but the modified evaluation OccluSense (mod.) did improve the results for validity. CONCLUSION: When employing the modified evaluation strategy, OccluSense staining achieves similar reliability and validity as the reference standard. Pre-colouring of occlusal contacts with Gnatho-Film and the modified evaluation strategy, might become standard for analysing occlusal contacts stained by OccluSense in the future.

Asunto(s)

RESUMEN

The present technical article describes a protocol to digitally reproduce the emergence profile of an interim implant prosthesis (IP) and to transfer its macrogeometry into the definitive restoration. The purpose of this protocol was to minimize alterations in the gingival architecture developed during the interim restorative phase of a single implant that could potentially jeopardize its esthetic outcome. The process included obtaining an intraoral scan with the interim IP in situ, a duplicate of this intraoral scan that was used to capture the exact position of the implant, and an extraoral scan of the prosthesis. These data could then be imported into IOS software to create a model where the patients' soft tissue was incorporated with precision, allowing for the fabrication of a definitive crown with an optimal soft tissue adaptation. As there are few articles in the scientific literature that have reported a consistent method to replicate the emergence profile of an interim IP, the present technical article aims to highlight the potential of utilizing the emergence profile of an interim IP created by IOS software.

Asunto(s)

RESUMEN

OBJECTIVE: A diagnostic mock-up is a key tool that allows a preview of the outcome of an esthetic restoration. With recent developments in CAD/CAM technology, it is important to understand the pros and cons of chairside digital dentistry and the restorative materials used. The aim of the present case report is to describe in detail the use of a 3D-printed mock-up fabricated from a polymer-based material for an esthetic treatment plan within a fully digital workflow. CASE REPORT: A 45-year-old female patient presented at the clinic concerned about her esthetic appearance and the color of her anterior incisors. After a conclusive diagnosis, a restoration was planned using ceramic veneers from maxillary premolar to premolar. For a preview visualization of the outcome, an intraoral scanner was used to obtain 3D images and to allow the design of a digital smile. The template STL file was exported to a 3D printer and a 0.6-mm mock-up in A3-shade 3D resin was produced after 25 min. The mock-up was tested through a try-in and approved by the patient. As a result, the printed mock-up was considered predictable and reliable for the final restoration. CONCLUSIONS: The ease, speed, and reduced costs derived from the digital workflow, in conjunction with the accuracy of the mock-up, made the procedure highly efficient and recommendable.

Asunto(s)