RESUMEN

The development of a direct method for preparing regenerated cellulose (RC) ultrafiltration membranes from cellulose is urgently needed. In this study, refined cotton was used as the raw material to successfully prepare RC ultrafiltration membranes at room temperature using a ZnCl2/AlCl3 solvent system combined with a nonsolvent-induced phase separation (NIPS) method. This solvent system effectively degrades cellulose, producing RC ultrafiltration membranes with varying degrees of polymerization (DP). The research results indicate that reducing the DP of cellulose significantly decreases the viscosity of the solution, facilitating the formation of an asymmetric, finger-like pore structures in the membrane. Furthermore, a decrease in DP slightly enlarges the surface pore size and significantly thickens the dense layer. At a DP of 250, the water flux of the DP250-ET membrane reached 630 L·m-2·h-1·bar-1, with a molecular weight cut-off (MWCO) of ~300 kDa, enabling efficient separation of viruses (LRV > 3.91) and IgG. The exposure of more hydroxy groups on the RC enhances the membrane's hydrophilicity, indicated by a water contact angle (WCA) of 39.5°. Compared to commercial polyethersulfone (PES) membranes, the DP250-ET membrane exhibited lower protein adsorption and excellent anti-fouling performance in practical applications (FRR > 80 %). Overall, this work confirms the significant potential of the eco-friendly ZnCl2/AlCl3 solvent system in the fabrication of RC ultrafiltration membranes, where the structure and performance of the membrane can be tailored by adjusting the DP of cellulose.

RESUMEN

The excessive utilization of antimicrobials in humans and animals has resulted in considerable environmental contamination, necessitating the development of high-performance antibiotic adsorption media. A significant challenge is the development of composite nanofibrous materials that are both beneficial and easy to fabricate, with the aim of improving adsorption capacity. Herein, a new kind of zeolitic imidazolate framework-8 (ZIF-8)-modified regenerated cellulose nanofibrous membrane (ZIF-8@RC NFM) was designed and fabricated by combining electrospinning and in situ surface modification technologies. Benefiting from its favorable surface wettability, enhanced tensile strength, interconnected porous structure, and relatively large specific surface area, the resulting ZIF-8@RC NFMs exhibit a relatively high adsorption capacity for tetracycline hydrochloride (TCH) of 105 mg g-1 within 3 h. Moreover, a Langmuir isotherm model and a pseudo-second-order model have been demonstrated to be more appropriate for the description of the TCH adsorption process of ZIF-8@RC-3 NFMs. Additionally, this composite fibrous material could keep a relatively stable adsorption capability under various ionic strengths. The successful fabrication of the novel ZIF-8@RC NFMs may shed light on the further development of wastewater adsorption treatment materials.

Asunto(s)

RESUMEN

Phase change fibers (PCFs), incorporating with diverse phase change materials (PCMs) such as paraffin wax (PW), have been recognized as one of the effective strategies for fabricate smart thermoregulatory textiles. However, some fatal defects exist in traditional paraffin-cellulose-based PCFs, including the paraffin leakage and the low fiber strength. In this work, we herein propose a facile method to prepare uniform and stable paraffin emulsions stabilized by cellulose nanofibrils (CNFs), followed by a simple coaxial wet spinning to develop smart and robust cellulose-based PCFs for human body temperature management. Benefiting from the CNF-reinforced encapsulation, the stability of paraffin capsules and the compatibility of cellulose and paraffin are indeed promoted, thus allowing the cellulose-based PCF with excellent mechanical strength, leakage prevention, and thermal regulation. As a result, the as-prepared PCF, namely CNF1-PE/PW with optimal 1 wt% CNF1 loading, features a high tensile stress of 10.95 MPa at a strain of 111.2 % and a phase-change enthalpy value of 140.24 J/g with a slight paraffin leakage rate of 0.9 %. Moreover, the corresponding wearable fabric exhibits an excellent thermal storage and release recyclability even after 50 cycles. Therefore, this study provides a new idea for the development of intelligent cellulose-based phase change fiber materials.

RESUMEN

Fiber-shaped Zn-ion capacitors (FSZICs) have shown great potential in wearable electronics due to their long cycle life, high energy density, and good flexibility. Nevertheless, it is still a critical challenge to develop a conductive fiber with long size and high mechanical properties as the FSZIC cathode using sustainable and low-cost materials. Herein, regenerated cellulose (RC) -based conductive microfibers are prepared by a simple, continuous, and scalable wet spinning process. The 3D nanoporous networks of RC caused by physical self-cross-linking allow MXene and MnO2 to be uniformly and firmly embedded. The rapid extrusion and limited drying result in the highly aligned structure of the fibers, endowing the hybrid fiber with an ultra-high tensile strength (145.83 Mpa) and Young's modulus (1672.11 Mpa). MXene/MnO2-RC-based FSZIC demonstrates a high specific capacitance of 110.01 mF cm-3, an energy density of 22.0 mWh cm-3 at 0.57 A cm-3 and excellent cycling stability with 90.5 % capacity retention after 5000 cycles. This work would lead to a great potential of cellulose for application in next-generation green and wearable electronics.

Asunto(s)

RESUMEN

Introduction: Patients who need to be readmitted to the hospital because of complications from infections or require long-term care and rehabilitation face substantial financial hardships. To ensure the safety of patients undergoing surgery, it is crucial to implement measures that prevent wound infections before and after the procedure. Antibacterial wound dressings are essential to prevent infections during surgical procedures. There are various types of antibacterial wound dressings available on the market, such as silver-based dressings, hydrocolloid dressings, polyhexamethylene biguanide, alginate dressings, collagen-based dressings, and iodine-based dressings. Methods: We used each type (standard, knit, fibril, and non-woven) of a commercial brand of oxidized regenerated cellulose (ORC) called Regecel to test bacterial growth. The choice of antibacterial wound dressing depends on the type of wound being treated. Different bacterial strains require specific culture conditions to thrive and grow in laboratory settings. To obtain accurate and reliable results, it is vital to follow the precise culture conditions required for each bacterial strain. Results: The evaluation of ORC highlighted its potential to inhibit bacterial growth, showing promising results against various bacterial strains and Candida albicans. Different variants of ORC, such as Regecel, have demonstrated impressive capacity to hinder the growth of 32 distinct bacterial strains, with inhibition rates ranging from 40-100%. These bacteria include methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant Enterococcus (VRE), and penicillin-resistant Streptococcus pneumoniae. Conclusion: This study supports the usage and development of ORC (Regecel) as an innovative approach to treating bacterial infections.

RESUMEN

Regenerated cellulose (RC) films are considered a sustainable packaging material that can replace non-degradable petroleum-based plastics. However, their susceptibility to water vapor and oxygen can limit their effectiveness in protecting products. This study introduces a novel approach for enhancing RC films to create durable, flexible, hydrophobic, high-barrier, and biodegradable packaging materials. By exploring the impact of ascorbic acid coagulation bath treatment and plasma-enhanced chemical vapor deposition (PECVD) on the properties of RC films, we found that the coagulation bath treatment facilitated the organized reconfiguration of cellulose chains, while PECVD applied a dense SiOx coating on the film surface. The results demonstrated a significant enhancement in water vapor and oxygen barrier properties of the composite film, almost reaching the level of commercial barrier films. Moreover, the composite film displayed exceptional biodegradability, fully degrading in soil within 35 days. Additionally, it showcased impressive mechanical strength, hydrophobic characteristics, and freshness preservation, positioning it as a valuable option for bio-based high-barrier packaging applications.

RESUMEN

Three commercial regenerated cellulose samples were subjected to TEMPO-catalyzed oxidation using solid NaOCl·5H2O as the primary oxidant for structural analyses of the oxidized products (TEMPO = 2,2,6,6-tetramethylpiperidine-1-oxyl). The regenerated cellulose/water slurries became transparent solutions after oxidation for 60 min. The yields of the oxidized products were almost 100 % when they were isolated as precipitates in ethanol/water mixtures. The solution-state NMR spectra revealed that the oxidized products were almost pure water-soluble ß-(1 â†’ 4)-polyglucuronic acids; the reaction conditions described herein ensured the complete oxidation of the C6-OH groups in the regenerated cellulose samples to C6-carboxy groups. However, the solid-state 13C NMR spectra of the oxidized products indicated that C2/C3-ketones (<20 % of the total units) were formed during side reactions, which is characteristic for oxidized products prepared from regenerated cellulose with the C2/C3-glycol structure. These ketones were likely to form intermolecular hemiacetal linkages in the oxidized products. During conductivity titration of the oxidized products, it is necessary to control the sample masses to accurately determine the carboxy contents. The mass-average degree of polymerization decreased from 330 to 890 for the original regenerated cellulose samples to 65-79 for the oxidized products; substantial depolymerization is inevitable during TEMPO-catalyzed oxidation of the regenerated cellulose samples.

RESUMEN

PHBV is a promising plastic for replacing conventional petroleum-based plastics in the future. However, the mechanical properties of PHBV are too low for use in high-stress applications and the degradation of the polymer limits possible applications. In this work, the mechanical properties were, therefore, increased using bio-based regenerated cellulose fibers and degradation processes of the PHBV-RCF composites were detected in accelerated aging tests under various environmental conditions. Mechanical, optical, rheological and thermal analysis methods were used for this characterization. The fibers significantly increased the mechanical properties, in particular the impact strength. Different degradation mechanisms were identified. UV radiation caused the test specimens to fade significantly, but no reduction in mechanical properties was observed. After storage in water and in aqueous solutions, the mechanical properties of the compounds were significantly reduced. The reason for this was assumed to be hydrolytic degradation catalyzed by higher temperatures. The hydrolytic degradation of PHBV was mainly caused by erosion from the test specimen surface. By exposing the regenerated cellulose fibers, this effect could now also be visually verified. For the use of regenerated cellulose fiber-reinforced PHBV in more durable applications, the aging mechanisms that occur must be prevented in the future through the use of stabilizers.

RESUMEN

The increasing awareness of global ecological concerns and the rising sustainability consciousness associated with the manufacturing of non-renewable and non-biodegradable composite materials have led to extensive research on product and process developments of more sustainable, environmentally friendly, and fully biodegradable biocomposites for higher-value end-use applications. All-cellulose composites (ACCs) are an emerging class of biocomposites, which are produced utilizing solely cellulose as a raw material that is derived from various renewable biomass resources, such as trees and plants, and are assessed as fully biodegradable. In this study, sustainable ACCs were fabricated for the first time based on the full dissolution of commercially available sulfite dissolving (D) pulps as a matrix with concentrations of 1.5 wt.% and 2.0 wt.% in an aqueous NaOH-urea solvent, and they were then impregnated on/into the pre-fabricated birch (B), abaca (A), and northern softwood (N) fiber sheets as reinforcements by the vacuum-filtration-assisted impregnation approach. This research aimed to investigate the effects of the impregnated cellulose matrix concentrations and types of the utilized cellulose fiber reinforcements (B, A, N) on the morphological, crystalline, structural, and physio-mechanical properties of the ACCs. The highest degrees of improvements were achieved for tensile strength (+532%, i.e., from 9.24 MPa to 58.04 MPa) and strain at break of the B fiber-reinforced ACC B1.5 (+446%, i.e., from 1.36% to 4.62%) fabricated with vacuum impregnation of the 1.5 wt.% cellulose matrix. Noticeably, the greatest improvements were attained in strain at break of the A and N fiber-reinforced ACCs A2.0 (+218%, i.e., from 4.44 % to 14.11%) and N2.0 (+466%, i.e., 2.59% to 14.65%), respectively, produced with vacuum impregnation of the 2.0 wt.% cellulose matrix. The study highlights the diverse properties of the all-cellulose biocomposite materials that could, expectedly, lead to further development and research for upscaled production of the ACCs.

RESUMEN

Pickering water-in-water (W/W) emulsions stabilized by biobased colloids are pertinent to engineering biomaterials with hierarchical and confined architectures. In this study, stable W/W emulsions are developed through membranization utilizing biopolymer structures formed by the adsorption of cellulose II nanospheres and a globular protein, bovine serum albumin (BSA), at droplet surfaces. The produced cellulose II nanospheres (NPcat, 63 nm diameter) bearing a soft and highly accessible shell, endow rapid and significant binding (16 mg cm- 2) with BSA. NPcat and BSA formed complexes that spontaneously stabilized liquid droplets, resulting in stable W/W emulsions. It is proposed that such a system is a versatile all-aqueous platform for encapsulation, (bio)catalysis, delivery, and synthetic cell mimetics.

RESUMEN

Cellulose is difficult to melt or dissolve. The dissolution and regeneration process paves the way to convert cellulose into diverse forms but still suffers from high costs and environmental pollution. Here, we developed a method that uses aqueous alkali to efficiently dissolve cellulose at a temperature above 0 °C in minutes for fabricating regenerated cellulose. Cellulose was modified with minimal carboxymethyl groups to weaken the intermolecular interaction and improve its dissolution. The modified cellulose can be commercially obtained from carboxymethyl cellulose manufacturing with low cost and high quality. The use of only aqueous alkali reduces pollution and facilitates chemical recycling, and the moderate dissolving temperature reduces energy consumption. The regenerated cellulose materials display excellent mechanical properties and can be recycled or biodegraded after use. The method allows the use of diverse raw materials and modifications to broaden its applicability. The study develops a low-cost and eco-friendly method to fabricate regenerated cellulose.

RESUMEN

Recycling of waste cotton fabrics (WCFs) is a desirable solution to address the problems brought up by fast fashion, but it remains challenging due to inherent limitations in preparing stable and spinnable dopes by dissolving high molecular weight cellulose efficiently and cost effectively. Herein, we show that despite the prevailing concerns of cellulose degradation via glycosidic hydrolysis when dissolved in acids, fast and non-destructive direct dissolution of WCFs in aqueous phosphoric acid (a.q. PA) could be realized using a cyclic freeze-thawing procedure, which combined with subsequent adjustment of degree of polymerization (DP) and degassing yielded stable and spinnable dopes. Regenerated cellulose fibers (RCFs) with favorable tensile strength (414.2 ± 14.3 MPa) and flexibility (15.4 ± 1.5 %) could be obtained by carefully adjusting the coagulation conditions to induce oriented and compact packing of the cellulose chains. The method was shown to be conveniently extended to dissolve reactively dyed WCFs, showing great potential as a cheap and green alternative to heavily explored ionic liquids (ILs) and N-methylmorpholine-N-oxide (NMMO)-based systems for textile-to-textile recycling of WCFs.

Asunto(s)

RESUMEN

OBJECTIVES: The treatment of primary spontaneous pneumothorax not only involves bulla resection via video-assisted thoracic surgery but also covers the lesion. Ideal treatment should minimize adhesions and reduce the recurrence rate. This study aimed to explore different covering methods and compare the frequency of early recurrence for each covering method. METHODS: We included 370 subjects with primary spontaneous pneumothorax < 25 years who were treated with video-assisted thoracic surgery from August 2012 to December 2022. Subjects were divided into three groups depending on how the treated lesions were covered. The P group included 162 subjects treated between April 2012 and June 2017 whose lesions were covered using polyglycolic acid sheets on the staple line of the bulla resection lesion. The O group included 93 subjects treated between July 2017 and July 2019 whose lesions were covered with oxidized regenerated cellulose over a polyglycolic acid sheet. The N group included 115 subjects treated between August 2019 and December 2022 whose lesions were covered with oxidized regenerated cellulose over a polyglycolic acid nano sheet. RESULTS: Recurrence rates were 3.7%, 8.6%, and 6.0% in the P, O, and N groups, respectively; however, the differences were not statistically significant. The adhesions were milder in the N group than in the P and O groups. CONCLUSIONS: Although both covering methods were effective in preventing recurrence, further studies involving further treatment modifications and longer-term follow-ups are required.

RESUMEN

Photocatalytic membranes integrate membrane separation and photocatalysis to deliver an efficient solution for water purification, while the top priority is to exploit simple, efficient, renewable, and low-cost photocatalytic membrane materials. We herein propose a facile one-stone-two-birds strategy to construct a multifunctional regenerated cellulose composite membrane decorated by Prussian blue analogue (ZnPBA) microspheres for wastewater purification. The hypotheses are that: 1) ZnCl2 not only serves as a cellulose solvent for tuning cellulose dissolution and regeneration, but also functions as a precursor for in-situ growth of spherical-like ZnPBA; 2) More homogeneous reactions including coordination and hydrogen bonding among Zn2+, [Fe(CN)6]3- and cellulose chains contribute to a rapid and uniform anchoring of ZnPBA microspheres on the regenerated cellulose fibrils (RCFs). Consequently, the resultant ZnPBA/RCM features a high loading of ZnPBA (65.3 wt%) and exhibits excellent treatment efficiency and reusability in terms of photocatalytic degradation of tetracycline (TC) (90.3 % removal efficiency and 54.3 % of mineralization), oil-water separation efficiency (>97.8 % for varying oils) and antibacterial performance (99.4 % for E. coli and 99.2 % for S. aureus). This work paves a simple and useful way for exploiting cellulose-based functional materials for efficient wastewater purification.

Asunto(s)

RESUMEN

In this work, regenerated cellulose textile fibers, Ioncell-F, dry-wet spun with different draw ratios, have been investigated by scanning wide-angle X-ray scattering (WAXS) using a mesoscopic X-ray beam. The fibers were found to be homogeneous on the 500 nm length scale. Analysis of the azimuthal angular dependence of a crystalline Bragg spot intensity revealed a radial dependence of the degree of orientation of crystallites that was found to increase with the distance from the center of the fiber. We attribute this to radial velocity gradients during the extrusion of the spin dope and the early stage of drawing. On the other hand, the fiber crystallinity was found to be essentially homogeneous over the fiber cross section.

RESUMEN

The construction of the preferred orientation structure by stretching is an efficient strategy to fabricate high-performance cellulose film and it is still an open issue whether crystalline structure or amorphous molecular chain is the key factor in determining the enhanced mechanical performance. Herein, uniaxial stretching with constant width followed by drying in a stretching state was carried out to cellulose hydrogels with physical and chemical double cross-linking networks, achieving high-performance regenerated cellulose films (RCFs) with an impressive tensile strength of 154.5 MPa and an elastic modulus of 5.4 GPa. The hierarchical structure of RCFs during uniaxial stretching and drying was systematically characterized from micro- to nanoscale, including microscopic morphology, crystalline structure as well as relaxation behavior at a molecular level. The two-dimensional correlation spectra of dynamic mechanical analysis and Havriliak-Negami fitting results verified that the enhanced mechanical properties of RCFs were mainly attributed to the stretch-induced tight packing and restricted relaxation of amorphous molecular chains. The new insight concerning the contribution of molecular chains in the amorphous region to the enhancement of mechanical performance for RCFs is expected to provide valuable guidance for designing and fabricating high-performance eco-friendly cellulose-based films.

RESUMEN

Taking the perspective of cellulose molecular chain assembly via the "bottom-top" route, we delve into the influence of both the cellulose solution and the coagulation bath on the assembly process and structure of regenerated cellulose beads (RCBs). The results show that cellulose molecular weight, mass fraction, and the presence of surfactant have an impact on RCBs. Contrary to traditional views where the structures of material are determined by solvent-nonsolvent exchange rate, ion-cellulose binding capacity also affects RCBs. Overall, the influence of ions follows the Hofmeister sequence. Kosmotropes promote the assembly of cellulose chains and elementary fibers, leading to "salting out" effects, reduced pore size of RCBs, increased crystallinity, and enhanced mechanical properties. In contrast, chaotropes induce "salting in" effects, resulting in opposite outcomes. The average pore size of RCBs coagulated in NaSCN solution was approximately 15-folds larger than those prepared in sodium citrate solution. Anions have a greater impact than cations, and both "salting out" and "salting in" effects strengthen with concentration. Temperature variations primarily affect solvent and nonsolvent exchange speed during cellulose regeneration. These findings provide new insights into regulating RCBs, enabling tailored performance for different applications.

RESUMEN

The powdered form of oxidized regenerated cellulose (ORC powder) is a widely used biodegradable hemostatic material in the field of surgery. There are several reports of its effectiveness and safety; however, excessive foreign body reactions remain a concern for surgeons in total knee arthroplasty (TKA). A 70-year-old woman who underwent unilateral TKA using ORC powder to control perioperative blood loss exhibited a skin rash around her operated knee at six days postoperatively. These reactions were potentially hypersensitive to ORC powder. After receiving antiallergic medication for 18 days, the skin rash disappeared. Although there are several reports on the safety of ORC powder, inadequate intraoperative lavage of the product may induce hypersensitive reactions such as skin rash.

RESUMEN

Water collection from atmospheric fog was deemed to be an efficient and sustainable strategy to defuse the freshwater scarcity crisis. Fog harvesting and trapping fibers, therefore, has aroused extensive interest due to their ease of preparation, weave, and use. However, the traditional fibers used in fog collector usually have a low fog collection capacity and efficiency because of their unreasonable morphology and structure design. Herein, we proposed a simple process to construct advanced fibers using a one-step wet spinning of hydrophobic polyvinylidene fluoride (PVDF) and hydrophilic cellulose mixture fiber for fog harvesting. The as-prepared fibers featured a petaloid structure and surface hydrophobic gradient, thus facilitating fog deposition, water droplet formation, and drainage. The unique longitudinal groove structure above enabled the hybrid fiber to achieve an excellent fog collection efficiency of 2750.26 mg/cm2/h per monofilament, which outstripped most of other fiber materials. When woven these fibers were in a longitudinal array network with an interval of 1 mm, and the fog collection efficiency can maintain at 10.30 L/m2/h. Therefore, this work provided a new strategy for further exploration of effective fog collection by cellulose-based fiber materials.

RESUMEN

Nanocellulose is a kind of renewable natural polymer material with high specific surface area, high crystallinity, and strong mechanical properties. RC nanofibers (RCNFs) have attracted an increasing attention in various applications due to their high aspect ratio and good flexibility. Herein, a novel and facile strategy for RCNFs preparation with high-speed shear induced in urea solution through "bottom-up" approach was proposed in this work. Results indicated that the average diameter and yield of RCNF was approach to 136.67 nm and 53.3 %, respectively. Meanwhile, due to the regular orientation RC chains and arrangement micro-morphology, RCNFs exhibited high crystallinity, strong mechanical properties, stable thermal degradation performance, and excellent UV resistance. In this study, a novel regeneration process with high-speed shear induced was developed to produce RCNFs with excellent properties. This study paved a strategy for future low-energy production of nanofibers and high value-added conversion applications of agricultural waste.

Asunto(s)