RESUMEN

Mucilage is a gelatinous mixture of polysaccharides secreted from the seed coat and/or pericarp of many plant seeds when soaked in water. Mucilage affected seed germination while maintaining hydration levels during scarcity. Cydonia oblonga (quince) seeds are natural hydrocolloids extruding biocompatible mucilage mainly composed of polysaccharides. Quince seed mucilage (QSM) has fascinated researchers due to its applications in the food and pharmaceutical industries. On a commercial scale, QSM preserved the sensory and physiochemical properties of various products such as yogurt, desserts, cakes, and burgers. QSM is responsive to salts, pH, and solvents and is mainly investigated as edible coatings in the food industry. In tablet formulations, modified and unmodified QSM as a binder sustained the release of various drugs such as cefixime, capecitabine, diclofenac sodium, theophylline, levosulpiride, diphenhydramine, metoprolol tartrate, and acyclovir sodium. QSM acted as a reducing and capping agent to prepare nanoparticles for good antimicrobial resistance, photocatalytic characteristics, and wound-healing potential. The present review discussed the extraction optimization, chemical composition, stimuli-responsiveness, and viscoelastic properties of mucilage. The potential of mucilage in edible films, tissue engineering, and water purification will also be discussed.

Asunto(s)

RESUMEN

This research focused on developing pH-regulated intelligent networks using quince and mimosa seed mucilage through aqueous polymerization to sustain Capecitabine release while overcoming issues like short half-life, high dosing frequency, and low bioavailability. The resulting MSM/QSM-co-poly(MAA) hydrogel was evaluated for several parameters, including complex structure formation, stability, pH sensitivity, morphology, and elemental composition. FTIR, DSC, and TGA analyses confirmed the formation of a stable, complex cross-linked network, demonstrating excellent stability at elevated temperatures. SEM analysis revealed the hydrogels' smooth, fine texture with porous surfaces. PXRD and EDX results indicated the amorphous dispersion of Capecitabine within the network. The QMM9 formulation achieved an optimal Capecitabine loading of 87.17 %. The gel content of the developed formulations ranged from 65.21 % to 90.23 %. All formulations exhibited excellent swelling behavior, with ratios between 65.91 % and 91.93 % at alkaline pH. In vitro dissolution studies indicated that up to 98 % of Capecitabine was released after 24 h at pH 7.4, demonstrating the potential for sustained release. Furthermore, toxicological evaluation in healthy rabbits confirmed the system's safety, non-toxicity, and biocompatibility.

Asunto(s)

RESUMEN

INTRODUCTION: Nanoparticles are used in various fields such as chemistry, pharmacy, biotechnology, and food science since they provide higher sensitivity than traditional optical detection methods. Recently, synthesis of nanomaterials using green chemistry has become popular. Many phytochemical components are used in the synthesis of nanoparticles, including vitamins, proteins, polysaccharides, glycosides, essential oils and phenolic compounds. OBJECTIVE: A novel green nanotechnology-based method using quince seed mucilage (QSM) was designed for the determination of ascorbic acid in pharmaceutical preparations. QSM, a natural polysaccharide, was used as a bioreducing and stabilizing reagent in the proposed silver nanoparticle (SNP)-based method. METHOD: In the first stage of the developed method, silver(I) is reduced to silver(0) via QSM and spherical, homogeneous SNPs were prepared (QSM-SNPs). In the second stage of the developed method, SNPs nuclei were enlarged with the addition of ascorbic acid. The developed method was validated by performance parameters (linearity, recovery, and precision). Ascorbic acid determination was performed by measuring increase in absorbance at 420 nm. RESULTS: The limit of detection and limit of quantification for ascorbic acid were, respectively, found to be at 0.27 and 0.90 µM. The QSM-SNP-based method was successfully applied to effervescent tablets containing ascorbic acid. The standards of the excipients frequently used in pharmaceutical preparations did not interfere with the developed method. CONCLUSION: The developed QSM-SNP-based method satisfies the requirements of green nanotechnology. The developed QSM-SNP-based method is simple, fast, eco-friendly and low-cost.

Asunto(s)

RESUMEN

The effects of various synthesis methods of a novel biodegradable magnetically recyclable cellulose-based adsorbent (a magnetized modified silica aerogel) on Pb(II) removal efficiency were studied. QSM (quince seed mucilage) was modified via hydrothermal and ultrasonic modes. Oven-drying and freeze-drying procedures were then used to obtain the final adsorbents. The adsorbents were named A1 to A4 and B1 to B4, depending on the synthesis and drying techniques. XRD, FTIR, BET, and SEM are characterization techniques for identifying the adsorbents. Average crystallite sizes of 15.5, 8.3, 10.9, and 2.7 nm were obtained for A1, A2, A3, and A4 samples (Scherrer formula). SEM image confirmed a Sticky bullets-like morphology. The pHpzc values of 3.4, 6.0, and 4.1 were also determined for Fe-silica aerogel, Fe-QSM, and Fe-silica aerogel-QSM samples. The highest adsorption efficiency of the A2 adsorbent towards Pb(II) cations was followed via the experimental design by the RSM (response surface methodology) approach. ANOVA results showed model F value 185 (>F0.05, 14, 15 = 2.42) and LOF F-value of 0.3831 (

Asunto(s)

RESUMEN

In current work, quince seed mucilage and ß-Cyclodextrin based pH regulated hydrogels were developed using aqueous free radical polymerization to sustain Capecitabine release patterns and to overcome its drawbacks, such as high dose frequency, short half-life, and low bioavailability. Developed networks were subjected to thermal analysis, Fourier transforms infrared spectroscopy, powder x-ray diffraction, elemental analysis, scanning electron microscopy, equilibrium swelling, and in-vitro release investigations to assess the network system's stability, complexation, morphology, and pH responsiveness. Thermally stable pH-responsive cross-linked networks were formed. Nanocomposite hydrogels were prepared by incorporating Capecitabine-containing clay into the swollen hydrogels. All the formulations exhibited equilibrium swelling ranging from 67.98 % to 92.98 % at pH 7.4. Optimum Capecitabine loading (88.17 %) was noted in the case of hydrogels, while it was 74.27 % in nanocomposite hydrogels. Excellent gel content (65.88 %-93.56 %) was noticed among developed formulations. Elemental analysis ensured the successful incorporation of Capecitabine. Nanocomposite hydrogels released 80.02 % longer than hydrogels after 30 h. NC hydrogels had higher t1/2 (10.57 h), AUC (121.52 µg.h/ml), and MRT (18.95 h) than hydrogels in oral pharmacokinetics. These findings imply that the pH-responsive carrier system may improve Capecitabine efficacy and reduce dosing frequency in cancer therapy. Toxicity profiling proved the system's safety, non-toxicity, and biocompatibility.

Asunto(s)

RESUMEN

In this investigation, we have synthesized magnetite nanoparticles (Fe3O4 NPs) coated with quince seed mucilage (QSM) as a natural, biocompatible, and biodegradable component and loaded them with ciprofloxacin (CIP) to act as an antibacterial agent. The structural, magnetic, physicochemical, colloidal, and antibacterial properties of the samples were tested using various characterization tools such as XRD, TEM, FE-SEM, VSM, FT-IR, UV-Vis, DLS, BET, and disk diffusion for testing the antibacterial properties. XRD and VSM results confirmed the fabrication of a highly pure cubic spinel phase for Fe3O4. The results of FE-SEM and TEM analyses indicate a spherical morphology of the magnetite NPs with a mean diameter of about 13 nm, and the results of DLS show a hydrodynamic diameter of 81.9 to 119.2 nm. The zeta potential value for the magnetic Fe3O4 NPs was as high as -55.2 mV, indicating suitable colloidal stability of the NPs for biological applications. The VSM results indicate a high saturation magnetization of the samples as well as a small coercivity and Remanence of the samples, which indicate the superparamagnetic property of the NPs. It was also indicated that the amount of drug adsorbed on the magnetic nanoparticles at different pH values (5.5 to 6.5) is about 85 %. It was likewise detected that the synthesized Fe3O4@QSM-CIP NPs possess antibacterial activity against standard strains of both Gram positive and Gram-negative bacteria (minimum inhibitory concentration = 100 ppm). The overall findings imply that the proposed magnetic NPs with antibacterial activity are promising for biomedical applications.

Asunto(s)

RESUMEN

The presence of high unsaturated fat content and polyphenols results in the short storage life of fresh walnut kernels. For prolonging their shelf life, edible coatings incorporated with antimicrobial compounds can be used as a tool. Quince seed mucilage was identified as a novel green biomaterial to be explored as a coating substance. Quince seed mucilage and sodium alginate were mixed in five different proportions of 100:0 (QAH1), 80:20 (QAH2), 60:40 (QAH3), 40:60 (QAH4), and 20:80 (QAH5) and the resultant composite hydrogels were studied for different physical properties. These composite hydrogels incorporated with vanillin were coated on fresh walnut kernels while uncoated samples served as control. Composite hydrogel coatings with a higher proportion of QSM retained a higher whiteness index, lightness (L*), DPPH radical scavenging capacity, total phenolic content, and overall acceptability values in walnut kernels during the entire storage period of 35 days. QAH1 showed the lowest weight loss percentage, lipid oxidation, and yeast and mold counts while the control sample showed the highest (P < 0.05) values. The results concluded that quince-based composite hydrogel coatings were effective in retention of quality and prevention of degradation of fresh walnut kernels during the storage.

RESUMEN

In this study, the therapeutic hydrocolloid quince seed mucilage (QSM) from Cydonia oblonga Miller fruit is enriched with needle-like nano-hydroxyapatite (nHAp) crystals to fabricate a novel biomimetic osteogenic bioscaffold. The molecular weight (Mw) of water-based extracted QSM was measured with GPC (8.67 × 105 g/mol), and the composite blend was prepared at a ratio of 1:1 (w/w) QSMaq and nHAp. The porous bioscaffolds were manufactured by the freeze-drying method, and evaluated in-depth with advanced analyses. The XRD, ATR-FTIR, SEM-EDX, and elemental mapping analyses revealed a uniform coated semi-crystalline structure with no covalent bindings between QSM and nHAp. Moreover, due to the hydrocolloid backbone, a supreme swelling ratio (w/w, 6523 ± 190%) with suitable pore size (208.12 ± 99.22 µm) for osteogenic development was obtained. Further, the cytocompatible bioscaffolds were evaluated for osteogenic differentiation in vitro using human adipose-derived mesenchymal stem cells (hAMSCs). The immuno/histochemical (I/HC) staining revealed that the cells with the spherical morphology invaded the pores of the prepared bioscaffolds. Also, relatively early up-regulated osteogenic markers were observed by the qRT-PCR analyses. Overall, it is believed that the QSM-nHAp bioscaffolds might be favorable in non-load bearing applications, especially in the cranio-maxillofacial region, due to their regenerative, bendable, and durable features.

Asunto(s)

RESUMEN

This study investigates the potential of iron oxide nanoparticles (Fe3O4) and quince seed mucilage as combined genetic carriers to deliver plasmid DNA (pDNA) through the gastrointestinal system. The samples are characterized by x-ray diffraction (XRD), zeta potential, dynamic light scattering, FT-IR spectroscopy, field emission scanning electron microscopy and vibrating sample magnetometry. The stability of pDNA loading on the nanocarriers and their release pattern are evaluated in simulated gastrointestinal environments by electrophoresis. The XRD patterns reveal that the nanocarriers could preserve their structure during various synthesis levels. The saturation magnetization (Ms) of the Fe3O4cores are 56.48 emu g-1without any magnetic hysteresis. Not only does the loaded pDNA contents experience a remarkable stability in the simulated gastric environment, but also, they could be released up to 99% when exposed to an alkaline environment similar to the intestinal fluid of fish. The results indicate that the synthesized nanoparticles could be employed as efficient low-cost pDNA carriers.

Asunto(s)

RESUMEN

OBJECTIVE: Providing a suitable environment to improve the healing process is the main target of wound dressing that also protects the wound from additional harms. In the present study, fabrication and characterisation of a new kind of electrospun wound dressing composed of polyvinyl alcohol (PVA) and quince seed mucilage (QSM) is reported. METHOD: QSM was extracted from quince seeds, purified, freeze-dried and used to produce aqueous solutions containing different amounts of PVA and QSM. The wound dressings were fabricated via the electrospinning method and their characteristics were investigated with scanning electron microscope (SEM) images, Fourier transform infrared (FTIR) spectra, tensile and swelling test, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) cytotoxicity assay against fibroblast cells. RESULTS: SEM images confirmed that proper, uniform, non-oriented nanofibres with an average diameter in the range of 60-240nm, depending on the QSM content had been fabricated. The tensile test showed that with increasing QSM content, the tensile strength of fibre increased while elongation at break was decreased, which was consistent with SEM images where the diameter of samples decreased by increasing QSM content. MTT assay showed significant biocompatibility against fibroblast cells; however, it was increased by increased QSM proportion. In addition, SEM images supported the proper adhesion of fibroblast cells on the sample one day after culturing. CONCLUSION: Overall, the findings of the current study support the potential of PVA/QSM nanofibres as a proper candidate for biomedical applications, especially as a wound dressing.

Asunto(s)

RESUMEN

Plant-based hydrogels have attracted great attention in biomedical fields since they are biocompatible and based on natural, sustainable, cost-effective, and widely accessible sources. Here, we introduced new viscoelastic bio-inks composed of quince seed mucilage and cellulose nanofibrils (QSM/CNF) easily extruded into 3D lattice structures through direct ink writing in ambient conditions. The QSM/CNF inks enabled precise control on printing fidelity where CNF endowed objects with shape stability after freeze-drying and with suitable porosity, water uptake capacity, and mechanical strength. The compressive and elastic moduli of samples produced at the highest CNF content were both increased by ~100% (from 5.1 ± 0.2 kPa and 32 ± 1 kPa to 10.7 ± 0.5 and 64 ± 2 kPa, respectively). These values ideally matched those reported for soft tissues; accordingly, the cell compatibility of the printed samples was evaluated against HepG2 cells (human liver cancer). The results confirmed the 3D hydrogels as being non-cytotoxic and suitable to support attachment, survival, and proliferation of the cells. All in all, the newly developed inks allowed sustainable 3D bio-hydrogels fitting the requirements as scaffolds for soft tissue engineering.

Asunto(s)

RESUMEN

Prostatic specific antigen (PSA) is known as a biomarker of prostate cancer. In males, prostate cancer is ranked second as leading cause of death out of more than 200 different cancer types1. As a result, early detection of cancer can cause a significant reduction in mortality. PSA concentration directly is related to prostate cancer, so normal serum concentrations in healthy means are 4 ng and above 10 ng as abnormal concentration. Therefore, PSA determination is important to cancer progression. In this study, a free label electrochemical immunosensor was prepared based on a new green platform for the quantitative detection of the PSA. The used platform was formed from quince seed mucilage containing green gold and silver nanoparticles and synthesized by the green method (using Calendula officinalis L. extract). The quince mucilage biopolymer was used as a sub layer to assemble nanoparticles and increase the electrochemical performance. This nanocomposite was used to increase the antibody loading and accelerate the electron transfer, which can increase the biosensor sensitivity. The antibodies of the PSA biomarker were successfully incubated on the green platform. Under the optimal conditions, the electrochemical impedance spectroscopy (EIS) was proportional to the PSA biomarker concentration from 0.1 pg mL-1 to 100 ng mL-1 with low limit of detection (0.078 pg mL-1). The proposed green immunosensor exhibited high stability and reproducibility, which can be used for the quantitative assay of the PSA biomarker in clinical analyses. The results of real sample analysis presented another tool for the PSA biomarker detection in physiologic models.

Asunto(s)

RESUMEN

Design and fabrication of biologically active cryogels using novel biopolymer(s) are still of great importance at regenerating bone defects such as traumatic bone injuries, maxillofacial surgery, osteomyelitis, and osteoporosis. Nowadays, plant mucilage, an herbal biomaterial, has been drawn attention by scientists due to their marvelous potential to fabricate 3-dimensional (3D) physical constructs for the field of regenerative medicine. Herein, a 3D cryogel from silicon-integrated quince seed mucilage (QSM) is constructed using microwave-assisted sol-gel reaction, characterized in-depth by attenuated total reflectance Fourier transform-infrared spectroscopy (ATR-FTIR), solid-state silicon cross-polarization magic-angle nuclear magnetic resonance (29Si-CP-MAS NMR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimeter (DSC), micro-mechanical testing, porosity, and swelling tests, contact angle measurements, Brunauer-Emmet-Teller and Barret-Joyner-Halenda (BET-BJH) analysis, enzymatic biodegradation test, and field emission-scanning electron microscopy-energy dispersive X-ray spectroscopy (FE-SEM-EDX) mapping. The osteobiologic capacity of the cryogels is determined using human adipose-derived mesenchymal stem cells (hAMSCs) under in vitro conditions. Osteogenic differentiation of hAMSCs on both QSM and silica-modified QSM (Si-QSM) cryogels is analyzed by histochemistry, immunohistochemistry, and quantitative-real time (q-RT) PCR techniques. The results obtained from in vitro experiments demonstrate that the upregulation of osteogenesis-related genes in Si-QSM cryogels presents a stronger and earlier development over QSM cryogels throughout the culture period, which in turn reveals the great potential of this novel Si-incorporated QSM cryogels for bone tissue engineering applications.

Asunto(s)

RESUMEN

In this study, quince seed mucilage (QSM) has been introduced as a novel biocoagulant for the pretreatment of leachate obtained from a composting facility. Response surface methodology (RSM) was used to study and optimize the effect of pH, QSM dosage and time on the coagulation performance. At the optimum conditions using 1370 mg L-1 of QSM at pH 3.8 and 29 min, 45.0% COD reduction was achieved in the coagulation-flocculation (CF) stage. After CF pretreatment stage, Fenton oxidation (FO) process was applied on the leachate. Maximum COD reduction was obtained at pH 2.5, H2O2 concentration of 190 mM, and Fe2+ concentration of 1.64 mM. At the optimum conditions of the combined treatment process, up to 84.4% COD, 99.4% turbidity and 98.2% BOD were removed. The combined CF/FO process using QSM in the CF stage was found to be an effective method for the treatment of compost leachate.

Asunto(s)

RESUMEN

The use of biological macromolecules like quince seed mucilage (QSM), as the common curative practice has a long history in traditional folk medicine to cure wounds and burns. However, this gel cannot be applied on exudative wounds because of the high water content and non-absorption of infection of open wounds. It also limits cell-to-cell interactions and leads to the slow wound healing process. In this study to overcome these problems, a novel QSM-based hybrid scaffold modified by PCL/PEG copolymer was designed and characterized. The properties of this scaffold (PCL/QSM/PEG) were also compared with four scaffolds of PCL/PEG, PCL/Chitosan/PEG, chitosan, and QSM, to assess the role of QSM and the combined effect of polymers in improving the function of skin tissue-engineered scaffolds. It was found, the physicochemical properties play a crucial role in regulating cell behaviors so that, PCL/QSM/PEG as a smart/stimuli-responsive bio-matrix promotes not only human-adipose stem cells (h-ASCs) adhesion but also supports fibroblasts growth, via providing a porous-network. PCL/QSM/PEG could also induce keratinocytes at a desirable level for wound healing, by increasing the mechanobiological signals. Immunocytochemistry analysis confirmed keratinocytes differentiation pattern and their normal phenotype on PCL/QSM/PEG. Our study demonstrates, QSM as a differentiation/growth-promoting biological factor can be a proper candidate for design of wound dressings and skin tissue-engineered substrates containing cell.

Asunto(s)

RESUMEN

In the present study, the polymer obtained from Cydonia oblonga Miller seeds (quince seed mucilage (QSM)) in combination with polycaprolactone (PCL) was used for producing hybrid electrospun scaffolds as three-dimensional (3D) cell culture platforms. Various PCL/QSM ratios were tested to obtain a uniform product with an appropriate mean fiber diameter for cell growth. The chemical structures of the scaffolds were studied by FT-IR spectroscopy and their crystallinity was investigated by XRD. Fiber morphology studies by SEM revealed that the fiber mean diameters decrease upon increasing the QSM component of the electrospun compound. The PCL/QSM ratio of 60/40 exhibited desirable uniform bead-free nanofibers. The hydrophilicity of the scaffolds were explored by contact angle measurements, which indicated that more hydrophilic fibers are produced as the PCL/QSM ratio is decreased. Porosity and strength of the scaffolds were also studied, which showed the key role of PCL in mechanical strength of the nanofibers. The results of cell culture experiments using epithelial Vero cells on the scaffolds displayed their high capacity in cell growth and proliferation. It was revealed that the electrospun PCL/QSM based scaffolds with 3D structures and 75-150 nm mean fiber diameters are able to maximize adhesion and growth of Vero cells.

Asunto(s)

RESUMEN

Various concentrations of ß-carotene (2.5-20% w/w dry mucilage weight) were loaded within Cydonia oblonga mucilage (COM) which further processed through electrohydrodynamic processing (EHP) to attain BC-Loaded nanostructures of high thermochemical stability. The BC loaded COM systems were characterized in terms of droplet size, rheological properties, surface tension, and electrical conductivity and their subsequent impacts on the morphology and physicochemical attributes of the produced nanostructures were studied. Increasing the ß-carotene content, increased the viscosity and droplet size of colloidal systems but diminished their conductivity and surface tension. A transition from monomodal to bimodal size distribution was also observed at higher levels of ß-carotene incorporation. In the case of EHP-produced nanostructures, scanning electron microscopy observations revealed a transition from nanoparticle to nanofiber by increasing the BC content from 2.5 to 20%. At lower concentrations of BC (2.5 and 5%) electrospraying was the dominant phenomenon that resulted in producing homogenous nanoparticles while the beaded fibers and nanofiber structures were obtained at 10 and 20% concentrations of BC, respectively. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and encapsulation efficiency of the produced nanostructures revealed successful encapsulation of BC into the COM polymer structure through EHP. The results of these assessments showed that the nano-particles comprising BC had more homogenous structure and higher encapsulated BC compared to the BC-loaded nano-fibers. The results of X-ray diffraction (XRD) and differential scanning calorimetry (DSC) measurements revealed amorphous structure of the produced nanostructures. Thermogravimetric assessments corroborated the higher thermal stability of BC loaded nanostructures compared with the free BC. These results provided novel information on the ability of COM in encapsulating bioactive agents through electrohydrodynamic processing.

Asunto(s)

RESUMEN

In this study, the complex coacervation of whey protein isolate (WPI) and quince seed mucilage (QSM) was studied as a function of pH (7.0-2.0), biopolymers concentration (0.05, 0.1 and 0.5%) and WPI:QSM ratio (10:90 to 90:10), according to protolytic titration, electrical conductivity (EC) and turbidity analyses. The solution containing 0.5% biopolymers with WPI:QSM ratio of 70:30 resulted in maximum complex coacervation at the pHopt 4.0. With increasing WPI:QSM ratio, the peaks of pH-turbidity curves shifted to higher pH values, and with increasing biopolymers concentration, the optimum WPI:QSM ratio and pH shifted to higher values. The EC of biopolymers solutions (concentration 0.5%) increased by decreasing pH and WPI:QSM ratio. The aforementioned optimum condition resulted coacervates with maximum particles size (16.22 µm) and minimum ζ-potential (-5.1 mV), which were observed as densely agglomerated macro-complexes with highest coacervation yield (80.67%). The X-ray analysis showed that coacervates retain the amorphous structure of individual biopolymers. These coacervates may be useful for encapsulation and delivery of (bio-) active compounds.

Asunto(s)

RESUMEN

This study investigated the potential use of quince seed mucilage (QSM) as alternative bioadsorbents for methylene blue (MB) dye from aqueous solutions. This novel magnetic nanocomposite adsorbent (MNCA) based on QSM was synthesized by in situ formation of magnetic iron oxide nanoparticles into QSM solution. The MNCAs were characterized using FTIR, SEM, TEM, XRD, and VSM. Removal of MB was investigated by batch adsorption technique. The thermodynamic parameters suggest that the dye adsorption process is spontaneous and exothermic in nature. Moreover, the adsorbents showed high selectivity for the adsorption of cationic dyes with regenerated properties. The pseudo-second-order kinetics and Langmuir adsorption isotherm models also provide the best correlation of the experimental data for MB adsorption. The results indicate that the MNCAs can be employed as efficient low cost adsorbents with excellent dye adsorption performance in wastewater treatment process.

Asunto(s)

RESUMEN

Some physical properties like Gas barrier, thermal stability, and mechanical properties and brittleness of pure biopolymers film are inadequate for food packaging. The functional properties of quince seed mucilage-based films were enhanced by addition of nanoclay (NC) (Cloisite 30B). Edible films were cast from heated aqueous solutions of quince seed (10% w/w) and NC (0.5%, 1%, 1.5%, and 2% w/w of quince seed). The effect of NC was studied in terms of tensile properties, water vapor permeability (WVP), oxygen permeability, and glass transition temperature (T g) of the nano composite films. In films containing NC, ultimate tensile strength enhanced to 22 MPa, and elongation increased from 2.48% to 6.5%. The addition of NC also improved gas barrier properties of the films. In films containing 2% NC, WVP decreased from 6.69 × 10(-7) g·m(-1)·h(-1)·Pa(-1) to 1.10 × 10(-7) g·m(-1)·h(-1)·Pa(-1) and oxygen permeability declined to 13.68 mL·day·m-(2). NC also influences glass transition temperature significantly. The study demonstrated that the properties of quince seed mucilage edible films can be significantly improved using NC as reinforcement.