RESUMEN

A novel membraneless ß-glucan/O2 enzymatic fuel cell was developed by combining a bioanode based on buckypaper modified with co-immobilized Agaricus meleagris pyranose dehydrogenase (AmPDH) and Rhodothermus marinus ß-glucosidase (RmBgl3B) (RmBgl3B-AmPDH/buckypaper) with a biocathode based on solid graphite modified with Myrothecium verrucaria bilirubin oxidase (MvBOx/graphite). AmPDH was connected electrochemically with the buckypaper using an osmium redox polymer in a mediated reaction, whereas MvBOx was connected with graphite in a direct electron transfer reaction. The fuel for the bioanode was produced by enzymatic hydrolysis of ß-glucan by the exoglucanase RmBgl3B into d-glucose, which in turn was enzymatically oxidised by AmPDH to generate a current response. This design allows to obtain an efficient enzymatic fuel cell, where the chemical energy converted into electrical energy is higher than the chemical energy stored in complex carbohydrate based fuel. The maximum power density of the assembled ß-glucan/O2 biofuel cell reached 26.3 ±â€¯4.6 µWcm-2 at 0.36 V in phosphate buffer containing 0.5 % (w/v) ß-glucan at 40 °C with excellent stability retaining 68.6 % of its initial performance after 5 days. The result confirms that ß-glucan can be employed as fuel in an enzymatic biofuel cell.

Asunto(s)

RESUMEN

Pyranose dehydrogenases (PDHs; EC 1.1.99.29; AA3_2) demonstrate ability to oxidize diverse carbohydrates. Previous studies of these enzymes have also uncovered substrate-dependent regioselectivity, along with potential to introduce more than one carbonyl into carbohydrate substrates. Enzymatic oxidation of carbohydrates facilitates their further derivatization or polymerization into bio-based chemicals and materials with higher value; accordingly, PDHs that show activity on xylooligosaccharides could offer a viable approach to extract higher value from hemicelluloses that are typically fragmented during biomass processing. In this study, AbPDH1 from Agaricus bisporus and AmPDH1 from Leucoagaricus meleagris were tested using linear xylooligosaccharides, along with xylooligosaccharides substituted with either arabinofuranosyl or 4-O-(methyl)glucopyranosyluronic acid residues with degree of polymerization of two to five. Reaction products were characterized by HPAEC-PAD to follow substrate depletion, UPLC-MS-ELSD to quantify the multiple oxidation products, and ESI-MSn to reveal oxidized positions. A versatile method based on product reduction using sodium borodeuteride, and applicable to carbohydrate oxidoreductases in general, was established to facilitate the identification and quantification of oxidized products. AbPDH1 activity toward the tested xylooligosaccharides was generally higher than that measured for AmPDH1. In both cases, activity values decreased with increasing length of the xylooligosaccharide and when using acidic rather than neutral substrates; however, AbPDH1 fully oxidized all linear xylooligosaccharides, and 60-100% of all substituted xylooligosaccharides, after 24 h under the tested reaction conditions. Oxidation of linear xylooligosaccharides mostly led to double oxidized products, whereas single oxidized products dominated in reactions containing substituted xylooligosaccharides. Notably, oxidation of specific secondary hydroxyls vs. the reducing end C-1 depended on both the enzyme and the substrate. For all substrates, however, oxidation by both AbPDH1 and AmPDH1 was clearly restricted to the reducing and non-reducing xylopyranosyl residues, where increasing the length of the xylooligosaccharide did not lead to detectable oxidation of internal xylopyranosyl substituents. This detailed analysis of AbPDH1 and AmPDH1 action on diverse xylooligosaccharides reveals an opportunity to synthesize bifunctional molecules directly from hemicellulose fragments, and to enrich for specific products through appropriate PDH selection.

RESUMEN

Pyranose Dehydrogenase 1 from the basidiomycete Agaricus meleagris (AmPDH1) is an oxidoreductase capable of oxidizing a broad variety of sugars. Due to this and its ability of dioxidation of substrates and no side production of hydrogen peroxide, it is studied for use in enzymatic bio-fuel cells. In-vitro deglycosylated AmPDH1 as well as knock-out mutants of the N-glycosylation sites N75 and N175, near the active site entrance, were previously shown to improve achievable current densities of graphite electrodes modified with AmPDH1 and an osmium redox polymer acting as a redox mediator, up to 10-fold. For a better understanding of the role of N-glycosylation of AmPDH1, a systematic set of N-glycosylation site mutants was investigated in this work, regarding expression efficiency, enzyme activity and stability. Furthermore, the site specific extend of N-glycosylation was compared between native and recombinant wild type AmPDH1. Knocking out the site N252 prevented the attachment of significantly extended N-glycan structures as detected on polyacrylamide gel electrophoresis, but did not significantly alter enzyme performance on modified electrodes. This suggests that not the molecule size but other factors like accessibility of the active site improved performance of deglycosylated AmPDH1/osmium redox polymer modified electrodes. A fourth N-glycosylation site of AmPDH1 could be confirmed by mass spectrometry at N319, which appeared to be conserved in related fungal pyranose dehydrogenases but not in other members of the glucose-methanol-choline oxidoreductase structural family. This site was shown to be the only one that is essential for functional recombinant expression of the enzyme.

Asunto(s)

RESUMEN

Multigenicity is commonly found in fungal enzyme systems, with the purpose of functional compensation upon deficiency of one of its members or leading to enzyme isoforms with new functionalities through gene diversification. Three genes of the flavin-dependent glucose-methanol-choline (GMC) oxidoreductase pyranose dehydrogenase (AmPDH) were previously identified in the litter-degrading fungus Agaricus (Leucoagaricus) meleagris, of which only AmPDH1 was successfully expressed and characterized. The aim of this work was to study the biophysical and biochemical properties of AmPDH2 and AmPDH3 and compare them with those of AmPDH1. AmPDH1, AmPDH2 and AmPDH3 showed negligible oxygen reactivity and possess a covalently tethered FAD cofactor. All three isoforms can oxidise a range of different monosaccarides and oligosaccharides including glucose, mannose, galactose and xylose, which are the main constituent sugars of cellulose and hemicelluloses, and judging from the apparent steady-state kinetics determined for these sugars, the three isoforms do not show significant differences pertaining to their reaction with sugar substrates. They oxidize glucose both at C2 and C3 and upon prolonged reaction C2 and C3 double-oxidized glucose is obtained, confirming that the A. meleagris genes pdh2 (AY753308.1) and pdh3 (DQ117577.1) indeed encode CAZy class AA3_2 pyranose dehydrogenases. While reactivity with electron donor substrates was comparable for the three AmPDH isoforms, their kinetic properties differed significantly for the model electron acceptor substrates tested, a radical (the 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulphonic acid] cation radical), a quinone (benzoquinone) and a complexed iron ion (the ferricenium ion). Thus, a possible explanation for this PDH multiplicity in A. meleagris could be that different isoforms react preferentially with structurally different electron acceptors in vivo.

Asunto(s)

RESUMEN

Two dehydrogenases, cellobiose dehydrogenase from Corynascus thermophilus and pyranose dehydrogenase from Agaricus meleagris, were displayed for the first time on the surface of Saccharomyces cerevisiae using the yeast surface display system. Surface displayed dehydrogenases were used in a microbial fuel cell and generated high power outputs. Surface displayed cellobiose dehydrogenase has demonstrated a midpoint potential of -28mV (vs. Ag/AgCl) at pH=6.5 and was used in a mediator-less anode compartment of a microbial fuel cell producing a power output of 3.3µWcm(-2) using lactose as fuel. Surface-displayed pyranose dehydrogenase was used in a microbial fuel cell and generated high power outputs using different substrates, the highest power output that was achieved was 3.9µWcm(-2) using d-xylose. These results demonstrate that surface displayed cellobiose dehydrogenase and pyranose dehydrogenase may successfully be used in microbial bioelectrochemical systems.

Asunto(s)

RESUMEN

Agaricus bisporus is a litter degrading basidiomycete commonly found in humic-rich environments. It is used as model organism and cultivated in large scale for food industry. Due to its ecological niche it produces a variety of enzymes for detoxification and degradation of humified plant litter. One of these, pyranose dehydrogenase, is thought to play a role in detoxification and lignocellulose degradation. It is a member of the glucose-methanol-choline family of flavin-dependent enzymes and oxidizes a wide range of sugars with concomitant reduction of electron acceptors like quinones. In this work, transcription of pdh in A. bisporus was investigated with real-time PCR revealing influence of the carbon source on pdh expression levels. The gene was isolated and heterologously expressed in Pichia pastoris. Characterization of the recombinant enzyme showed a higher affinity towards disaccharides compared to other tested pyranose dehydrogenases from related Agariceae. Homology modeling and sequence alignments indicated that two loops of high sequence variability at substrate access site could play an important role in modulating these substrate specificities.

Asunto(s)

RESUMEN

Monomeric Agaricus meleagris pyranose dehydrogenase (AmPDH) belongs to the glucose-methanol-choline family of oxidoreductases. An FAD cofactor is covalently tethered to His103 of the enzyme. AmPDH can double oxidize various mono- and oligosaccharides at different positions (C1 to C4). To study the structure/function relationship of selected active-site residues of AmPDH pertaining to substrate (carbohydrate) turnover in more detail, several active-site variants were generated, heterologously expressed in Pichia pastoris, and characterized by biochemical, biophysical and computational means. The crystal structure of AmPDH shows two active-site histidines, both of which could take on the role as the catalytic base in the reductive half-reaction. Steady-state kinetics revealed that His512 is the only catalytic base because H512A showed a reduction in (kcat /KM )glucose by a factor of 10(5) , whereas this catalytic efficiency was reduced by two or three orders of magnitude for His556 variants (H556A, H556N). This was further corroborated by transient-state kinetics, where a comparable decrease in the reductive rate constant was observed for H556A, whereas the rate constant for the oxidative half-reaction (using benzoquinone as substrate) was increased for H556A compared to recombinant wild-type AmPDH. Steady-state kinetics furthermore indicated that Gln392, Tyr510, Val511 and His556 are important for the catalytic efficiency of PDH. Molecular dynamics (MD) simulations and free energy calculations were used to predict d-glucose oxidation sites, which were validated by GC-MS measurements. These simulations also suggest that van der Waals interactions are the main driving force for substrate recognition and binding.

Asunto(s)

RESUMEN

Pyranose dehydrogenase (PDH) is a monomeric flavoprotein belonging to the glucose-methanol-choline (GMC) family of oxidoreductases. It catalyzes the oxidation of free, non-phosphorylated sugars to the corresponding keto sugars. The enzyme harbors an FAD cofactor that is covalently attached to histidine 103 via an 8α-N(3) histidyl linkage. Our previous work showed that variant H103Y was still able to bind FAD (non-covalently) and perform catalysis but steady-state kinetic parameters for several substrates were negatively affected. In order to investigate the impact of the covalent FAD attachment in Agaricus meleagris PDH in more detail, pre-steady-state kinetics, reduction potential and stability of the variant H103Y in comparison to the wild-type enzyme were probed. Stopped-flow analysis revealed that the mutation slowed down the reductive half-reaction by around three orders of magnitude whereas the oxidative half-reaction was affected only to a minor degree. This was reflected by a decrease in the standard reduction potential of variant H103Y compared to the wild-type protein. The existence of an anionic semiquinone radical in the resting state of both the wild-type and variant H103Y was demonstrated using electron paramagnetic resonance (EPR) spectroscopy and suggested a higher mobility of the cofactor in the variant H103Y. Unfolding studies showed significant negative effects of the disruption of the covalent bond on thermal and conformational stability. The results are discussed with respect to the role of covalently bound FAD in catalysis and stability.

Asunto(s)

RESUMEN

A novel electrochemical enzyme biosensor was developed for real-time detection of cellulase activity when acting on their natural insoluble substrate, cellulose. The enzyme biosensor was constructed with pyranose dehydrongease (PDH) from Agaricus meleagris that was immobilized on the surface of a carbon paste electrode, which contained the mediator 2,6-dichlorophenolindophenol (DCIP). An oxidation current of the reduced form of DCIP, DCIPH2, produced by the PDH-catalyzed reaction with either glucose or cellobiose, was recorded under constant-potential amperometry at +0.25V (vs. Ag/AgCl). The PDH-biosensor was shown to be anomer unspecific and it can therefore be used in kinetic studies over broad time-scales of both retaining- and inverting cellulases (in addition to enzyme cocktails). The biosensor was used for real-time measurements of the activity of the inverting cellobiohydrolase Cel6A from Hypocrea jecorina (HjCel6A) on cellulosic substrates with different morphology (bacterial microcrystalline cellulose (BMCC) and Avicel). The steady-state rate of hydrolysis increased towards a saturation plateau with increasing loads of substrate. The experimental results were rationalized using a steady-state rate equation for processive cellulases, and it was found that the turnover for HjCel6A at saturating substrate concentration (i.e. maximal apparent specific activity) was similar (0.39-0.40s(-1)) for the two substrates. Conversely, the substrate load at half-saturation was much lower for BMCC compared to Avicel. Biosensors covered with a polycarbonate membrane showed high operational stability of several weeks with daily use.

Asunto(s)