RESUMEN

In response to heightened environmental awareness, various industries, including the civil and automotive sector, are contemplating a shift towards the utilization of more sustainable materials. For adhesive bonding, this necessitates the exploration of materials derived from renewable sources, commonly denoted as bio-adhesives. This study focuses on a bio-adhesive L-joint, which is a commonly employed configuration in the automotive sector for creating bonded structural components with significant bending stiffness. In this investigation, the behavior of joints composed of pine wood and bio-based adhesives was studied. Two distinct configurations were studied, differing solely in the fiber orientation of the wood. The research combined experimental testing and finite element modeling to analyze the strength of the joints and determine their failure mode when subjected to tensile loading conditions. The findings indicate that the configuration of the joint plays a crucial role in its overall performance, with one of the solutions demonstrating higher strength. Additionally, a good degree of agreement was observed between the experimental and numerical analyses for one of the configurations, while the consideration of the maximum principal stress failure predictor (MPSFP) proved to accurately predict the location for crack propagation in both configurations.

RESUMEN

Monochamus saltuarius Gebler is a serious insect pest in Europe and East Asia regions, including Portugal, Spain, China, Japan, and Korea. It transfers the pine wood nematode Bursaphelenchus xylophilus to conifer trees, resulting in pine wilt disease (PWD). As temperature is a key factor influencing insect population dynamics, temperature-dependent models describing M. saltuarius oviposition could estimate population growth potential and evaluate outbreak risks. In this study, the longevity and fecundity of M. saltuarius females were measured under constant temperature conditions ranging from 20 to 32 °C, and temperature-dependent models were constructed. The longevity of M. saltuarius females ranged from 83.36 days to 22.92 days, with a total fecundity of 141 eggs and 52.77 eggs at 20 °C and 32 °C, respectively. To describe oviposition, we used a single-phase simulation describing oviposition as a single model and a two-phase simulation describing sexual maturation and oviposition as two separate models. These models effectively described M. saltuarius oviposition (r2 > 0.96) under constant temperature conditions, with the two-phase simulation demonstrating greater accuracy overall. Such models could facilitate assessments of PWD risks. The modeling framework of this study shows potential for predicting threats from various forestry and agricultural pests.

RESUMEN

Plant resistance (R) genes play a crucial role in the detection of effector proteins secreted by pathogens, either directly or indirectly, as well as in the subsequent activation of downstream defence mechanisms. However, little is known about how R genes regulate the defence responses of conifers, particularly Pinus massoniana, against the destructive pine wood nematode (PWN; Bursaphelenchus xylophilus). Here, we isolated and characterised PmHs1pro-1, a nematode-resistance gene of P. massoniana, using bioinformatics, molecular biology, histochemistry and transgenesis. Tissue-specific expressional pattern and localisation of PmHs1pro-1 suggested that it was a crucial positive regulator in response to PWN attack in resistant P. massoniana. Meanwhile, overexpression of PmHs1pro-1 was found to activate reactive oxygen species (ROS) metabolism-related enzymes and the expressional level of their key genes, including superoxide dismutase, peroxidase and catalase. In addition, we showed that PmHs1pro-1 directly recognised the effector protein BxSCD1of PWN, and induced the ROS burst responding to PWN invasion in resistant P. massoniana. Our findings illustrated the molecular framework of R genes directly recognising the effector protein of pathology in pine, which offered a novel insight into the plant-pathogen arms race.

RESUMEN

Pine wood nematode (PWN) disease is a globally devastating forest disease caused by infestation with PWN, Bursaphelenchus xylophilus, which mainly occurs through the vector insect Japanese pine sawyer (JPS), Monochamus alternatus. PWN disease is notoriously difficult to manage effectively and is known as the "cancer of pine trees." In this study, dual enzyme-responsive nanopesticides (AVM@EC@Pectin) were prepared using nanocoating avermectin (AVM) after modification with natural polymers. The proposed treatment can respond to the cell wall-degrading enzymes secreted by PWNs and vector insects during pine tree infestation to intelligently release pesticides to cut off the transmission and infestation pathways and realize the integrated control of PWN disease. The LC50 value of AVM@EC@Pectin was 11.19 mg/L for PWN and 26.31 mg/L for JPS. The insecticidal activity of AVM@EC@Pectin was higher than that of the commercial emulsifiable concentrate (AVM-EC), and the photostability, adhesion, and target penetration were improved. The half-life (t1/2) of AVM@EC@Pectin was 133.7 min, which is approximately twice that of AVM-EC (68.2 min). Sprayed and injected applications showed that nanopesticides had superior bidirectional transportation, with five-times higher AVM contents detected in the roots relative to those of AVM-EC when sprayed at the top. The safety experiment showed that the proposed treatment had lower toxicity and higher safety for nontarget organisms in the application environment and human cells. This study presents a green, safe, and effective strategy for the integrated management of PWN disease.

Asunto(s)

RESUMEN

Pine wood nematode (PWN) disease is one of the major disasters in forests of southern China, causing substantial forest resources and ecological and economic losses. Based on field surveys and WFV image data from the GF-1 satellite, we constructed a spatial identification model of PWN disease with the random forest model to explore the relative influences of topography, human activities and stand factors on the occurrence of diseases and predict their spatial distribution. We then used the spatial autocorrelation analysis to assess the distribution characteristics of PWN disease at the regional scale. The results showed that the random forest model constructed in this study was effective in identifying pine nematode diseases (AUC value=0.99, overall accuracy=0.96). The norma-lized difference greenness index (NDGI), the distance to the highway, and normalized vegetation index (NDVI) were important factors in explaining the spatial variations of PWN disease occurrence. There was a positive spatial correlation in the occurrence of PWN disease (not randomly distributed but with obvious spatial aggregation characteristics). The high occurrence areas of pine wood nematode disease concentrated in Chitu Township, Zhufang Township and Shibatang Township, low occurrence areas concentrated in the vicinity of Rongjiang Street. The areas far away from the highway, low in elevation, and close to county roads were suffered to PWN disease. The results could serve the regional monitoring of pine nematode disease occurrence and provide practical guidance for PWN disease management.

Asunto(s)

RESUMEN

Pine, an evergreen conifer, is widely distributed worldwide. It is economically, scientifically, and ecologically important. However, pine wilt disease (PWD) induced by the pine wood nematode (PWN) adversely affects pine trees. Many studies have been conducted on the PWN and its beetle vectors to prevent the spread of PWD. However, studies providing a comprehensive understanding of the pine tree transcriptome in response to PWN infection are lacking. Here, we performed temporal profiling of the pine tree transcriptome using PWD-infected red pine trees, Pinus densiflora, inoculated with the PWN by RNA sequencing. Our analysis revealed that defense-responsive genes involved in cell wall modification, jasmonic acid signaling, and phenylpropanoid-related processes were significantly enriched 2 weeks after PWD infection. Furthermore, some WRKY-type and MYB-type transcription factors were upregulated 2 weeks after PWD infection, suggesting that these transcription factors might be responsible for the genome-wide reprogramming of defense-responsive genes in the early PWD stage. Our comprehensive transcriptome analysis will assist in developing PWD-resistant pine trees and identifying genes to diagnose PWD at the early stage of infection, during which large-scale phenotypic changes are absent in PWD-infected pine trees.

Asunto(s)

RESUMEN

BACKGROUND: Pine wood nematode (PWN; Bursaphelenchus xylophilus) is the causative agent of pine wilt disease (PWD), which is considered the most dangerous biohazard to conifer trees globally. The transmission of PWN relies on insect vectors, particularly the Japanese pine sawyer (JPS; Monochamus alternatus). However, the molecular mechanism underlying PWN-JPS assembly remains largely unknown. RESULTS: Here, we found that both geographical and gender could significantly affect the PCA (PWN carrying amount) of JPS; thus, JPS transcriptomes from diverse locations and genders were explored regard to PWN loading. Due to the shortage of genomes, we developed a full-length reference transcriptome for analyzing next-generation sequencing data. A comparative genomic study was performed, and 11 248 potential PWN-carrying associate genes (ß) were nominated in JPS by using the reported genomes of PWN and non-PWN carrier insect species. Then, 151 differentially expressed transcripts (DETs), 28 of them overlapped with ß, correlated with the PCA of JPS were nominated by RNA-Seq, and found that fatty acid ß-oxidation might be the key factor that affected the PCA of JPS. Furthermore, JPS fatty acid ß-oxidation rates were experimentally decreased using the inhibitor Etomoxir, leading to an increased PCA of JPS. Meanwhile, silencing MaCPT1 in JPS by RNA interference led to a decreased fatty acid ß-oxidation rate and increased PCA of JPS. CONCLUSIONS: In conclusion, MaCPT1 was able to decrease the PWN-JPS assembly formation through the fatty acid ß-oxidation of JPS. These results provide new insights for exploring the impact of PWN invasion on JPS. © 2024 Society of Chemical Industry.

Asunto(s)

RESUMEN

Pine wilt disease (PWD) is a devastating forest disease caused by the pinewood nematode (PWN), Bursaphelenchus xylophilus, a migratory endoparasite that infects several coniferous species. During the last 20 years, advances have been made for understanding the molecular bases of PWN-host trees interactions. Major advances emerged from transcriptomic and genomic studies, which revealed some unique features related to PWN pathogenicity and constituted fundamental data that allowed the development of postgenomic studies. Here we review the proteomic approaches that were applied to study PWD and integrated the current knowledge on the molecular basis of the PWN pathogenicity. Proteomics has been useful for understanding cellular activities and protein functions involved in PWN-host trees interactions, shedding light into the mechanisms associated with PWN pathogenicity and being promising tools to better clarify host trees PWN resistance/susceptibility.

Asunto(s)

RESUMEN

Under ion imbalance, water deficiency, and salt stress, the osmotic pressure of the tree sap increases, and pine wood nematodes (Bursaphelenchus xylophilus, PWN) parasitizing in the trees may be subjected to high-osmotic-pressure stress. KCl, L-malic acid, sucrose, and glycerol solutions were used as osmolytes to explore the highest osmotic concentration that PWN can tolerate. Survival analysis showed that when the treatment concentration exceeded 90%, only a few nematodes in the glycerol group survived under 6 h treatment, and most of the survivors were third-stage dispersal juveniles (DJ3). Further examination revealed that under different concentrations of glycerol-induced high osmotic pressure, the survival rate and body length change rate were the highest in the DJ3 and the lowest in the second-stage propagative juveniles. In order to explore the molecular mechanism of resistance of DJ3 to high osmotic stress, transcriptome sequencing was performed at each developmental stage of PWN and differentially expressed genes that were up-regulated or down-regulated only in DJ3 were screened. The expression of genes related to CoA in DJ3, a key enzyme in metabolism, was significantly higher than the other developmental stages. In addition, the expression of the anti-reversal signal pathway-related gene AKT-1 in DJ3 was significantly lower than in the other development stages. Therefore, the specific expression of genes in DJ3 under high osmotic pressure may help them rapidly produce and accumulate energy-related compounds and activate the adenosine 5'-monophosphate (AMP)-activated protein kinase (AMPK) pathway to respond to damage caused by high-osmotic-pressure stress in time, thus promoting survival.

RESUMEN

Biochar is an efficient and inexpensive carrier for bacteria that stimulate plant development and growth. In this study, different biopolymer additives (cellulose, xanthan gum, chitin and tryptone) were tested with different addition ratios (1:0.1, 1:0.5 and 1:1) on further enhancing biochar capacity for supporting the growth and activity of Bradyrhizobium japonicum (CB1809). We utilized pine wood biochar (PWBC) pyrolyzed at 400 °C as the base inoculum carrier. The shelf life and survival rate of CB1809 were counted using the colony-forming unit (CFU) method for up to 120 days. Peat served as a standard reference material against which all treatments were compared. Subsequent experiments evaluated the ability of carrier inoculants to promote Glycine max L. (soybean) plant growth and nodulation under different watering regimes, i.e., 55 % water holding capacity (WHC) (D0), 30 % WHC (D1) and, 15 % WHC (D2) using sandy loam soil. Results revealed that among different additives; xanthan gum with 1:0.5 to PWBC [PWBC-xanthan gum(1:0.5)] was observed as a superior formulation in supporting rhizobial shelf life and survival rate of CB1809. In pot experiments, plants with PWBC-xanthan gum(1:0.5) formulation showed significant increase in various physiological characteristics (nitrogenase activity, chlorophyll pigments, membrane stability index, and relative water content), root architecture (root surface area, root average diameter, root volume, root tips, root forks and root crossings), and plant growth attributes (shoot/root dry biomass, shoot/root length, and number of nodules). Additionally, a reduced enrichment of isotopic signatures (δ13C, δ15N) was observed in plants treated with PWBC-xanthan gum(1:0.5), less enrichment of δ15N indicates an inverse link to nodulation and nitrogenase activity, while lower δ13C values indicates effective water use efficiency by plants during drought stress. These results suggest that biopolymers supplementation of the PWBC is useful in promoting shelf life or survival rate of CB1809.

Asunto(s)

RESUMEN

Bursaphelenchus mucronatus was detected in association with the pine sawyer beetle (Monochamus galloprovincialis) during the implementation and testing of cross traps with insect attractants as an efficient tool for detection survey for pine wood nematode (Bursaphelenchus xylophilus) in Bosnia and Herzegovina and Georgia in 2017 and 2018, respectively. This nematode was characterized by morphological, morphometric and molecular features. This is the first report of B. mucronatus in association with a M. galloprovincialis in Bosnia and Herzegovina and in Georgia.

RESUMEN

BACKGROUND: The pinewood nematode is the causal agent of the pine wilt disease, which causes severe ecological and economic losses in coniferous forests. The invasion of pine wood nematode has undergone various rapid adaptations to a wide range of temperatures and to new hosts and vector insects. DNA methylation may play crucial roles in the rapid adaptation of PWN during invasion. However, whether the PWN genome contins functional DNA modifications remains elusive. RESULTS: Here, we detected the extensive presence of 5-methylcytosine (5mC) and N6-methyladenine (6mA) in the B. xylophilus genome, with low methylation levels at most positions. Cytosines were methylated in the CpG, CHG. and CHH sequence contexts, with the lowest methylation levels at CpG sites. The methylation levels of CpG and 6mA in gene regions showed opposite trends. The changes in the abundance of 5mC and 6mA showed the same trends in response to temperature change, but opposite trends during development. Sequence and phylogenetic analyses showed that the proteins BxDAMT and BxNMAD have typical characteristics of a methylase and demethylase, respectively, and are conserved among species. CONCLUSIONS: These findings shed light on the epigenetic modifications present in the genome of PWN, and will improve our understanding of its invasiveness and evolution.

Asunto(s)

RESUMEN

This study investigates a sustainable alternative for composites and adhesives in high-performance industries like civil and automotive. This study pioneers the development and application of a new methodology to characterize a bio-based, zero-thickness adhesive. This method facilitates precise measurements of the adhesive's strength and fracture properties under zero-thickness conditions. The research also encompasses the characterization of densified pine wood, an innovative wood product distinguished by enhanced mechanical properties, which is subsequently compared to natural pine wood. We conducted a comprehensive characterization of wood's strength properties, utilizing dogbone-shaped samples in the fiber direction, and block specimens in the transverse direction. Butt joints were employed for adhesive testing. Mode I fracture properties were determined via compact tension (CT) and double cantilever beam (DCB) tests for wood and adhesive, respectively, while mode II response was assessed through end-loaded split (ELS) tests. The densification procedure, encompassing chemical and mechanical processes, was a focal point of the study. Initially, wood was subjected to acid boiling to remove the wood matrix, followed by the application of pressure to enhance density. As a result, wood density increased by approximately 100 percent, accompanied by substantial improvements in strength and fracture energy along the fiber direction by about 120 percent. However, it is worth noting that due to the delignification nature of the densification method, properties in the transverse direction, mainly reliant on the lignin matrix, exhibited compromises. Also introduced was an innovative technique to evaluate the bio-based adhesive, applied as a zero-thickness layer. The results from this method reveal promising mechanical properties, highlighting the bio-based adhesive's potential as an eco-friendly substitute for synthetic adhesives in the wood industry.

RESUMEN

Efficient treatment of nutrient-rich wastewater is of paramount importance for protecting the ecosystem. In this work, an efficient, abundant, and eco-friendly adsorbent was derived from biochar and employed for phosphorus (P) adsorption. The key factors influencing the P removal efficiency of the activated biochar, including P concentration, pH, dosage, temperature, adsorption time, and influence of co-existing ion type, were investigated. Maximum P adsorption percentage (100%) was obtained with 10 mg/L and zinc chloride activated biochar (BC-Zn) compared to the other activated biochars. Results show that by increasing the P concentration from 5 to 200 mg/L, the phosphorus adsorption capacity increases from 0.13 to 10.4 mg/g biochar. Isotherms and kinetic studies further show that the P adsorption follows the Langmuir and quasi-second-order kinetic models. The mechanistic investigation demonstrated that P adsorption occurred by precipitation reaction. Furthermore, P desorption has been studied at different time intervals to understand the P release rate after adsorption.

RESUMEN

The actuality of this research is determined by the intensification of new ways of processing woody biomass. This requires revealing the impact of various physicochemical factors on the thermal degradation of wood biopolymers. Boron-nitrogen surface modifiers are used for wood antisepsis and we decided to check their effect on flammability. The aim of the research was to evaluate the flame retardant effect of boron-nitrogen surface modifiers of wood in an inert atmosphere (nitrogen was used). The evaluation was carried out by thermal analysis of modified and the control pine wood samples. The thermal analysis included thermogravimetry, differential scanning calorimetry and kinetic parameters of thermal degradation. It was found that the flame retardant effect of boron-nitrogen wood surface modifiers was not significantly pronounced in the nitrogen atmosphere. The mechanism of the flame retardant effect of boron-nitrogen compounds is reduced to "shielding" of the surface and increasing the proportion of carbonized residue. On the basis of correlation-regression analysis of kinetic parameters of wood thermodestruction in a nitrogen atmosphere, mathematical models of activation energy dependence on conversion were obtained and substantiated. The developed models can be further applied to calculate the predicted value of wood activation energy in the nitrogen atmosphere at any conversion value.

RESUMEN

The pyrolysis and in line steam reforming of different types of representative agroforestry biomass wastes (pine wood, citrus wastes and rice husk) was performed in a two-reactor system made up of a conical spouted bed and a fluidized bed. The pyrolysis step was carried out at 500 °C, and the steam reforming at 600 °C with a space time of 20 gcatalyst min gvolatiles-1 and a steam/biomass ratio (S/B) of 4. A study was conducted on the effect that the pyrolysis volatiles composition obtained with several biomasses has on the reforming conversion, product yields and H2 production. The different composition of the pyrolysis volatiles obtained with the three biomasses studied led to differences in the initial activity and, especially, in the catalyst deactivation rate. Initial conversions higher than 99% were obtained in all cases and the H2 production obtained varied in the 6.7-11.2 wt% range, depending on the feedstock used. The stability of the catalysts decreased depending on the feedstock as follows: pine wood â‰« citrus waste > rice husk. A detailed assessment of the mechanisms of catalyst deactivation revealed that coke deposition is the main cause of catalyst decay in all the runs. However, the volatile composition derived from the pyrolysis of citrus waste and rice husk involved the formation of an encapsulating coke, which severely blocked the catalyst pores, leading to catalyst deactivation during the first minutes of reaction.

Asunto(s)

RESUMEN

Pine wilt disease (PWD), caused by the pinewood nematode (PWN), Bursaphelenchus xylophilus, significantly impacts pine species and poses a broader ecological concern. An understanding of these nematode-associated microbes is essential for formulating sustainable PWD management strategies. We introduce a streamlined method for the aseptic extraction of B. xylophilus from pine seedlings, evolving beyond traditional Baermann funnel approaches. The method ensures optimal nematode extraction under sterile parameters, with seedling cutting discs processed using a unique sterile syringe assembly setup. The efficiency and simplicity of this method promise to significantly reduce the time and resources required. It also incorporates endosymbiotic bacterial isolation from isolated nematodes. The robustness of this method is affirmed by the successful isolation and identification of nematodes and bacterial strains as endosymbionts. Collectively, this protocol paves the way for more effective studies of nematodes and associated microbes, promoting the understanding of PWD and offering practical implications for better PWD management.•A simplified, aseptic method for extracting B. xylophilus from pine seedlings, offering a modern alternative to traditional Baermann funnel method.•Utilization of a specialized sterile syringe assembly setup, ensuring controlled and optimal nematode isolation.•Method validation achieved through the successful isolation and identification of bacterial strains as nematode endosymbionts.

RESUMEN

Prepregs are commonly fabricated with non-renewable petroleum-based materials. To reduce the impact of the manufacturing of these materials and to produce more sustainable prepregs, this research aims to manufacture poly(furfuryl alcohol)/wood veneer prepregs and their posterior molding in laminate composites. For this purpose, the vacuum infusion process was used to impregnate the wood veneers, and compression molding was applied to manufacture three- and four-layer laminate composites. Scanning electronic microscopy was used to evaluate the impregnation. the laminate manufacturing and differential scanning calorimetry were used to predict the shelf-life of the prepregs, Fourier-transform infrared was used to evaluate the induced hydrolysis resistance, and thermogravimetric analysis was used to determine the thermal degradation of the laminates. Moreover, water uptake and flexural, compressive, and tensile properties were evaluated. The kinetic models were effective and showed a shelf life for the laminates of approximately 30 days in storage at -7 °C, which is an interesting result for laminates with lignocellulosic materials. FTIR proved the laminates' excellent resistance to hydrolysis. The water absorption, thermal stability, and mechanical properties did not differ as the amount of wood veneer increased, but these results were up to ~40% higher compared with unidirectional wood laminates found in the literature, which is probably linked to the excellent interface observed with SEM.

RESUMEN

This study used environmentally friendly nano-xylan to enhance the drug loading and preservative performance (especially against white-rot fungi) of pine wood (Pinus massoniana Lamb), determine the best pretreatment, nano-xylan modification process, and analyze the antibacterial mechanism of nano-xylan. High-temperature, high-pressure steam pretreatment-assisted vacuum impregnation was applied to enhance the nano-xylan loading. The nano-xylan loading generally increased upon increasing the steam pressure and temperature, heat-treatment time, vacuum degree, and vacuum time. The optimal loading of 14.83% was achieved at a steam pressure and temperature of 0.8 MPa and 170 °C, heat treatment time of 50 min, vacuum degree of 0.08 MPa, and vacuum impregnation time of 50 min. Modification with nano-xylan prohibited the formation of hyphae clusters inside the wood cells. The degradation of integrity and mechanical performance were improved. Compared with the untreated sample, the mass loss rate of the sample treated with 10% nano-xylan decreased from 38 to 22%. The treatment with high-temperature, high-pressure steam significantly enhanced the crystallinity of wood.

RESUMEN

In this study, two different sample preparation methods to synthesize activated carbon from pine wood were compared. The pine wood activated carbon was prepared by mixing ZnCl2 by physical mixing, i.e., "dry mixing" and impregnation, i.e., "wet mixing" before high temperature carbonization. The influence of these methods on the physicochemical properties of activated carbons was examined. The activated carbon was analyzed using nitrogen sorption (surface area, pore volume and pore size distribution), XPS, density, Raman spectroscopy, and electrochemistry. Physical mixing led to a slightly higher density carbon (1.83 g/cm3) than wet impregnation (1.78 g/cm3). Raman spectroscopy analysis also showed that impregnation led to activated carbon with a much higher degree of defects than physical mixing, i.e., ID/IG = 0.86 and 0.89, respectively. The wet impregnated samples also had better overall textural properties. For example, for samples activated with 1:1 ratio, the total pore volume was 0.664 vs. 0.637 cm3/g and the surface area was 1191 vs. 1263 m2/g for dry and wet mixed samples, respectively. In the electrochemical application, specifically in supercapacitors, impregnated samples showed a much better capacitance at low current densities, i.e., 247 vs. 146 F/g at the current density of 0.1 A/g. However, the physically mixed samples were more stable after 5000 cycles: 97.8% versus 94.4% capacitance retention for the wet impregnated samples.