RESUMEN

OBJECTIVE: To evaluate the effect of rapid palatal expansion (RPE) using Haas-type expanders on children's oral health-related quality of life (OHRQOL) and compare said effect with that previously reported for the use of Hyrax-type expanders. MATERIALS AND METHODS: Forty participants aged 8-10 years with transverse maxillary deficiency were treated using Haas appliances. OHRQOL was measured using the CPQ8 - 10 before RPE, during RPE (T1), at the end of RPE (T2), and 1 month after appliance removal (T3). Generalized mixed models were fitted to assess the effect of the Haas-type expander compared to previously collected data (a nontreated and a Hyrax-type expander-treated group). RESULTS: RPE with Haas-type appliances had a negative impact on overall OHRQOL at T1 and T2 (P = 0.001), and a positive impact at T3 (P = 0.001). The Haas-type expander had a significantly greater negative impact on OHRQOL than the Hyrax-type appliance during RPE. At T1, overall scores using the Haas-type expander were 1.08 times the scores using the Hyrax-type expander (i.e., 8% increase; 95% CI, 1.01-1.17; P = 0.033). Patients using the Haas appliance had 1.24 times the scores of those using Hyrax-type devices for the oral symptoms domain at T1 (i.e., 24% increase; 95% CI, 1.06-1.46; P = 0.009). CONCLUSIONS: Correction of the transverse maxillary deficiency by RPE using the Haas appliance in children 8-10 years improves OHRQOL. The Haas- and Hyrax-type devices temporarily worsen OHRQOL during treatment, however, the negative impact is less with the Hyrax-type expander than with the Haas-type expander, because it causes fewer negative oral symptoms. CLINICAL RELEVANCE: From a patient-centered perspective, the use of the Hyrax over the Haas appliance may be suggested as it causes less negative oral symptoms during use.

Asunto(s)

RESUMEN

OBJECTIVES: To compare the buccal and palatal bone changes of maxillary posterior teeth produced by hybrid hyrax (HH) and conventional hyrax (CH) expanders in growing patients. MATERIAL AND METHODS: A sample of 32 patients with posterior crossbites in the late mixed dentition was recruited and randomly allocated into two groups. Group HH was composed of 18 individuals with a mean age of 10.7 years (six female, 12 male) treated with a hybrid expander with two anterior parasagittal miniscrews. Group CH was composed of 14 individuals with a mean age of 11.4 years (six female, eight male) treated with a conventional Hyrax expander. Cone-beam computed tomography (CBCT) exams were obtained before expansion (T1) and after 11 months when the expander was removed (T2). Buccal and palatal bone plate thickness and height of maxillary posterior teeth were measured. Intergroup comparisons were performed using t or Mann-Whitney tests (P < .05). RESULTS: The CH group showed greater decreases of the buccal bone plate height (mean change: 1.27 mm) at the maxillary first premolars compared to the HH group (mean change: 0.11 mm, P = .001). No intergroup difference was found for changes in the buccal and palatal bone thickness. CONCLUSIONS: Hybrid expanders showed a tendency to cause less negative impact on the buccal bone plate height of first premolars compared to conventional Hyrax expanders. However, the difference was not clinically significant. Both hybrid and conventional Hyrax expanders are safe for the alveolar bone morphology in the late mixed dentition.

Asunto(s)

RESUMEN

OBJECTIVES: To assess skeletal and dental effects and evaluate possible side effects of maxillary expansion with two different appliances, directly after expansion and 1 year postexpansion. MATERIALS AND METHODS: Forty-two patients with unilateral posterior crossbite (mean 9.5 ± 0.9 years) were randomized to either rapid maxillary expansion (RME) banded on the deciduous second molars and bonded to the primary canines or slow expansion with quad helix (QH) on the permanent first molars. Cone-beam computed tomography records were taken at baseline, directly after correction of the posterior crossbite and at follow-up 1 year after expansion. RESULTS: All patients were analyzed. RME opened the midpalatal suture more anteriorly and inferiorly (mean 4.1 mm) and less posteriorly and superiorly (mean 1.0 mm). No effect on midpalatal suture could be shown in the QH group after expansion, P < .001. Buccal bone width had significantly decreased (P < .001) in the QH group compared with the RME group. Buccal fenestrations and root resorption on the left first molar had a higher prevalence directly after expansion finished in the QH group (P = .0086, P = .013) but were not significant at 1-year follow-up (P = .11, P = .22). CONCLUSIONS: Opening of the suture with RME was more anterior and inferior, and the QH did not open the midpalatal suture at all. More buccal bone loss and fenestrations were seen on the permanent first molar in patients treated with conventional QH than RME anchored to deciduous teeth.

Asunto(s)

RESUMEN

OBJECTIVE: To assess the remodeling effects of protraction facemask therapy on the trabecular pattern of the mandible and identify quantitatively the regions of the mandible undergoing maximum changes in the trabecular pattern. MATERIALS AND METHODS: The retrospective study was conducted in 30 subjects divided into two groups. The treatment group (group 1) consisted of 15 subjects with skeletal class III malocclusion treated with a facemask (mean age: 9.1 ± 2.1 years). Digital panoramic radiographs (OPG) were obtained before treatment (T0) and at the end of active facemask therapy (T1) with a mean duration of 16.1 ± 2.5 months. In all, 15 skeletal class I subjects who did not undergo any orthodontic treatment (mean age 9.1 ± 2.2 years) comprised the control group (group 2) who had two OPGs at a mean interval of 13.6 ± 2.2 months. The fractal dimensional (FD) value was calculated in three regions: angular, condylar, and corpus region. RESULTS: Intragroup comparisons revealed a significant increase in the FD values in the right condylar (T0 = 1.2 ± 0.2; T1 = 1.4 ± 0.1) and left condylar (T0 = 1.2 ± 0.1; T1 = 1.4 ± 0.1) region (p < 0.05) and in the corpus region (FD values: right T0 = 1.2 ± 0.1, T1 = 1.4 ± 0.1; left T0 = 1.2 ± 0.1, T1 = 1.4 ± 0.1; p < 0.05). The intergroup comparison demonstrated that the treatment group showed greater changes compared with the controls in the condylar process (mean difference: right = 0.19, left = 0.20; p < 0.05) and the corpus region (0.172; p < 0.05). CONCLUSION: FD analysis demonstrated that the condylar process and the corpus region underwent the most significant change in the trabecular pattern in subjects treated with protraction facemask therapy.

RESUMEN

Studies have consistently shown an association of the Le Fort I osteotomy with undesirable adverse events in the nasolabial region, including lengthening and thinning of the upper lip, a reduction in upper vermilion exposure, and nasal base enlargement. Various minimally invasive techniques have been developed based on knowledge collected over recent decades on the aetiopathogenesis of these aesthetic impairments. The common scope of these techniques is to reduce the damage to the facial soft tissues and achieve a sound and spontaneous healing process, avoiding those procedures that are commonly used to counteract undesirable aesthetic changes. This paper provides a summary of the aetiopathogenesis of these adverse events, as well as an overview of current concepts in minimally invasive surgically assisted rapid maxillary expansion (miSARME).

RESUMEN

OBJECTIVES: To synthesise the dentoalveolar, periodontal and skeletal changes that occur when using maxillary expansion techniques assisted by temporary anchorage devices compared to conventional protocols. METHODS: Five databases and grey literature were consulted, up to December 2023, focusing on intervention designs and excluding other type of studies. The quality assessment was conducted by using the adaptation for orthodontics of the CONSORT statement, the guidelines for reporting non-randomised studies, the RoB-2 tool, and the ROBINS-I tool. A descriptive summary and meta-analysis using RevMan 5.4 were performed. RESULTS: Nine clinical trials were included (n=377 patients, mean age 13.2±0.6) with a diagnosis of transverse maxillary deficiency. The analysed studies showed qualitative dentoalveolar and periodontal changes after expansion, which were greater on the maxillary first premolars in tooth-borne appliances. Meta-analyses for some effects were included from two studies (n=64); patients who used tooth-borne appliances had greater effects of buccal intercoronal width between the premolars with statistically significant differences (Std Mean difference 2.34; 95% CI: 0.04-4.65 p=0.05). Conversely, those patients who used bone-borne or hybrid appliances had greater effects of buccal intercoronal width between molars with statistically significant differences (Std Mean difference -0.64; 95% CI: -1.38-0.10; p=0.09). CONCLUSIONS: According to the studies analysed, all measurements increased in the intervention groups after expansion. Quantitative analyses show different findings at dentoalveolar level when tooth-borne, bone-borne or hybrid appliances are considered. Nevertheless, the results should be taken with caution due to the heterogeneity of the studies. The protocol was registered at PROSPERO (CRD42021283170), with no funding to report.

Asunto(s)

RESUMEN

Posterior Crossbite is a common condition resulting because of transverse maxillary deficiency. The growth of the craniofacial complex finishes first in the transverse dimension, followed by sagittal and vertical dimensions. Conventional rapid palatal expansion (RPE) appliances are commonly used to correct transverse maxillary deficiency. Although RPE is efficient in correcting posterior crossbite, it results in dental side effects such as buccal tipping of maxillary molars, root resorption, bone dehiscence, and relapse. Mini-implant-assisted RPE has been introduced to increase the skeletal effects of expansion especially in patients with increased maturation and greater interdigitation of midpalatal suture. This article will review the biomechanics of RPE and mini-implant-assisted RPE. Additionally, the different designs of MARPE and the long-term clinical effects of expansion appliances will also be discussed in detail.

Asunto(s)

RESUMEN

BACKGROUND: Unilateral posterior crossbite is a common malocclusion, and early treatment is recommended to enable normal growth. There are several possibilities regarding choice of appliances used for correcting this malocclusion; however, when treatment is financed by public funds the decision needs to be based not only on the effects but also on the effect in relation to the costs. OBJECTIVES: The aim was to perform a cost-effectiveness analysis comparing quad helix (QH) and rapid maxillary expanders (RME; hyrax-type) in children in the early mixed dentition. MATERIAL AND METHODS: Seventy-two patients were randomized to treatment with either QH or RME, at two different centres. Data were collected from the patient's medical records regarding success rate, number of visits, total treatment time, emergency visits, and so forth, together with answers from patient questionnaires concerning absence from school and use of analgesics. A cost-effectiveness analysis with both an intention-to-treat (ITT) and a per-protocol approach was performed, as well as a deterministic sensitivity analysis. RESULTS: The success rate, one year after the completion of the expansion, was equal between groups according to the ITT approach. From a healthcare perspective, the mean cost difference between RME and QH was €32.05 in favour of QH (P = 0.583; NS). From a societal perspective, the mean cost difference was €32.61 in favour of QH (P = 0.742; NS). The total appliance cost alone was higher in the RME group €202.67 resp. €155.58 in the QH group (P = 0.001). The probability of RME having a higher cost was 71% from a healthcare perspective and 62.7% from a societal perspective. The total treatment time was 97 days longer in the QH group. In the deterministic sensitivity analysis, when using a higher valuation of the children's educational loss, the QH becomes €58 more costly than the RME. There was a statistically significant difference in chair time and visits between centres (P < 0.001). CONCLUSION: The difference in costs between RME and QH is not statistically significant, however, there is a slightly higher probability that RME is more expensive than QH with a mean cost of an additional €32 per patient from a healthcare perspective. Different work procedures at different centres indicate that logistics around the patient's treatment is a more important aspect than appliance used to decrease the number of visits and save chair time and thereby also costs.

Asunto(s)

RESUMEN

OBJECTIVE: This study aims to assess the expansive effects of pterygomaxillary disjunction (PMD) in surgically assisted rapid maxillary expansion (SARME) surgery using a meta-analysis approach. MATERIALS AND METHODS: The study conducted a comprehensive literature search across five databases: PubMed, Scopus, Medline, Embase, and Cochrane, adhering to the PRISMA 2020 guidelines. Dental alterations were assessed using either cone-beam computed tomography (CBCT) or dental casts, while skeletal changes were exclusively measured from CBCT scans. We analysed the dentoskeletal changes between PMD +/- groups and conducted a within-group comparison. The primary focus of the results was on the mean differences observed in pre- and post-operative measurements. RESULTS: Dental expansion was larger in the PMD+ group but not statistically significant. Skeletal expansion showed a significantly larger expansion in the posterior region in the PMD+ group (P = .033). Without PMD, anterior palatal expansion was significantly larger (P = .03), and the buccal tipping of posterior teeth was also significantly larger (P = .011) to achieve acceptable dental expansion outcomes. CONCLUSIONS: Both PMD +/- groups of SARME surgery can achieve satisfactory dental expansion outcomes. However, bone expansion and tooth inclination are also important factors that influence orthodontic treatment and post-expansion stability. By reducing the bony resistance with PMD, larger posterior palatal expansion and more parallel bony expansion are observed. In contrast, without PMD, there is smaller palatal expansion and greater tooth inclination in the posterior region. This could potentially lead to compromised periodontal conditions following expansion.

RESUMEN

This study was performed to evaluate the impact on the upper airway and nasal cavity of a new minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) technique for the treatment of adult patients with transverse maxillary deficiency, in comparison to surgically assisted rapid palatal expansion (SARPE). Computed tomography scans of 21 MISMARPE and 16 SARPE patients were obtained preoperatively (T0) and at the end of the activation period (T1) and analysed. Linear and volumetric measurements were performed in the dental, alveolar, nasal cavity, and oropharynx regions. Generalised estimating equations were used to consider the intervention time and surgery type, and their interaction. In both groups, measurements were increased at T1 (P < 0.001), except for oropharynx volume (P > 0.05). A greater expansion in nasal cavity floor and median palatal suture was shown for MISMARPE when compared to SARPE (P < 0.001), with the same degree of expander activation (P = 0.094). A trapezoidal (coronal plane) and 'V' shape (axial plane) expansion pattern, was observed after MISMARPE. Both surgical techniques were effective for maxillary expansion in adults. However, MISMARPE was performed without osteotomy of the pterygomaxillary suture, in an outpatient setting and with local anaesthesia.

Asunto(s)

RESUMEN

OBJECTIVE: To analyze and compare the effects of a traditional laboratory-fabricated Hyrax expander (T-Hyrax) and two different 3D-printed Hyrax expander models relative to tension points, force distribution, and areas of concentration in the craniofacial complex during maxillary expansion using finite element analysis. MATERIALS AND METHODS: Three maxillary expanders with similar designs, but various alloys were modeled: a T-Hyrax, a fully printed Hyrax (F-Hyrax), and a hybrid printed Hyrax (H-Hyrax). The stress distributions and magnitude of displacements were assessed with a 5 mm expansion in a symmetrical finite element model. The areas of interest included the teeth, alveolar processes, midpalatal suture, nasal complex, circummaxillary sutures (CS), and the expanders themselves. RESULTS: The highest stress value (29.2 MPa) was found at the midpalatal suture of the F-Hyrax, while the lowest stress (0.90 MPa) was found at the temporozygomatic suture in the T-Hyrax. On average, the F-Hyrax increased stress at the CS by 24.76% compared with the T-Hyrax and H-Hyrax. The largest displacements were found at the upper incisor (U1) and anterior nasal spine (ANS). The findings indicated an average increase of 12.80% displacement at the CS using the F-Hyrax compared to the T-Hyrax. CONCLUSION: The F-Hyrax exerts more stress and displacement on the maxilla than both the T-Hyrax and H-Hyrax, where the weak link appears to be the solder joint.

Asunto(s)

RESUMEN

OBJECTIVE: The objective of this prospective study was to assess possible changes in the position and shape of the temporomandibular joint (TMJ) articular disc in patients treated with two protocols of rapid maxillary expansion (RME) and face mask (FM) therapy. METHODS: A sample of 88 patients with Class III or Class III subdivision malocclusions, aged between 6 and 13 years, were consecutively selected and divided into three groups (G): G1-34 patients were treated with RME, followed by FM therapy; G2-34 patients were treated using RME according to modified alternate rapid maxillary expansion and constriction (ALT-RAMEC) protocol, followed by FM therapy. These treated groups were randomly (1:1 allocation ratio) distributed according to the two treatment protocols. G3 - Control Group - 20 untreated patients were followed. Magnetic resonance imaging (MRI) TMJs were obtained before (T1) and after (T2) a treatment period or follow-up. McNemar test, Fisher's exact test and intra- and inter-observer concordance (K) were performed (p ≤ .05). RESULTS: There were no statistically significant differences in the baseline cephalometric variables at T1 between the groups. There were statistically significant differences between the groups (p < .001) in relation to the disc shape in T1, since G1 (8 TMJs -11.76%) presented higher occurrences of altered forms in comparison with G2 (no changes). No significant differences were observed in disc position CM and OM (G1 - p > .999; G2 - p = .063; G3 - p = .500) and shape (G1 - p > 0.999; G2 - p = .250; G3 - not calculable), between T1 × T2, in any of the groups studied. CONCLUSION: The two treatment protocols did not have adverse effects on the position and shape of the TMJ disc, in a short-term evaluation.

Asunto(s)

RESUMEN

PURPOSE: The aim of this study was to evaluate the effect of combining a bone-borne palatal expander (distractor) with a maxillary osteotomy in the treatment of narrowed maxillae in treated cleft palate patients. Few articles in the literature isolated the effects of transpalatal distraction in cleft patients and most either excluded cleft patients or grouped them with non-cleft patients. The hypothesis is that the use of a bone-borne palatal expander in conjunction with a maxillary osteotomy would improve the amount of maxillary expansion at the anterior segment with less tipping of the segments and provide a harmonious arch form. METHODS: We studied four patients above 14 years of age with repaired cleft palate and progressive anterior constriction of the arch. All patients received a bone-borne distractor (UNI-Smile Distractor, Titamed, Belgium) combined with a LeFort I level osteotomy without pterygomaxillary disjunction. Dental models and CBCT measurements were used to analyze the skeletal and dental effects of the intervention. RESULT: All the patients who completed the trial had satisfactory expansion and normalization of the maxillary arch form. The average increase in the intercanine distance was 12.9 mm while the average increase in the intermolar distance was 7.2 mm. No significant change in molar inclination or buccal bone thickness was observed. CONCLUSION: The use of bone-borne palatal expanders aided by a maxillary osteotomy (transpalatal distraction) in treated cleft palate patients can provide a harmonious arch form in adolescent and adult patients. This trial was registered in the clinical trials registry with the ID NCT03837652 on February 12, 2019.

Asunto(s)

RESUMEN

INTRODUCTION: Maxillary expansion is a fundamental interceptive orthodontic treatment, which can be achieved through either a rapid expansion protocol or functional devices. However, no data exist about the efficacy of functional devices in achieving skeletal expansion. Therefore, the aim of this study was to compare the effects of the rapid palatal expander (RPE) and the function-generating bite type M (FGB-M) on the transversal dimension of the maxilla, and on the maxillary and mandibular dental arch width. METHODS: One hundred eighty-one skeletal Class I patients, aged between 6 and 12 years and with a cervical vertebral maturation stage II or III, with maxillary transversal deficiency were retrospectively enrolled; among these 55 were treated with FGB-M, 73 were treated with RPE and 51 were untreated subjects retrieved from historical databases. The pre-treatment (T0) and post-treatment (T1) frontal cephalograms were retrieved, and the maxillary and mandibular widths, and the distance between upper and lower first molars were measured. T1-T0 interval was of 17.3 months (RPE), 24.6 months (FGB-M) and 18.2 months (controls). RESULTS: The statistical analysis showed that there were no statistically significant differences between the RPE and FGB-M groups regarding skeletal and dental expansion, while the untreated control group differed significantly from the other two groups. CONCLUSION: The comparison between patients treated with RPE and FGB-M showed that there were no statistically significant differences between the RPE and FGB-M groups regarding the amount of skeletal expansion and dental arch width, suggesting that both appliances can be used to achieve similar results.

Asunto(s)

RESUMEN

AIM: The present study was designed to compare, on cone-beam computed tomography imaging, the skeletal and dental effects of the SARPE (Surgically assisted rapid palatal expansion) and MISMARPE (Minimally Invasive Surgical and Miniscrew-Assisted Rapid Palatal Expansion) techniques. MATERIALS AND METHODS: The sample of adult patients with transverse maxillary deficiency (TMD) was divided into two groups, and scans were obtained preoperatively (T0) and immediately after completion of expansion (T1). The posterior and anterior linear transverse distances of the maxilla and the angulation of the maxillary first molars were evaluated. The data were entered into a generalized estimating equations model to verify the postoperative effects of the different techniques. RESULTS: None of the techniques caused any appreciable change in the angulation of the molars. The skeletal changes were similar, with significantly greater gains in the nasal fossa and intermaxillary distance when using the MISMARPE. CONCLUSION: The technique can be an effective and lower morbidity alternative to SARPE.

Asunto(s)

RESUMEN

Abstract: This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 με. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

RESUMEN

OBJECTIVES: The selection of treatment for maxillary expansion is closely related to the calcification degree of the midpalatal suture. A classification method for individual assessment of the morphology of midpalatal suture in cone-beam computed tomography (CBCT) is useful for evaluating the calcification degree. Currently, convolutional neural networks (CNNs) have been introduced into the field of oral and maxillofacial imaging diagnosis. This study validated the ability of CNN models in assessing the maturation stage of the midpalatal suture. METHODS: The existing CNN model ResNet50 was trained to locate the CBCT transverse plane which contained a complete midpalatal suture. ResNet18, ResNet50, RessNet101, Inception-v3, and Efficientnetv2-s models were trained to evaluate the midpalatal suture maturation stage. Multi-class classification metrics, accuracy, recall, precision, F1-score, and area under the curve values from the receiver operating characteristic curve were used to evaluate the performance of the models, and gradient-weighted class activation map technology was utilised to visualise five midpalatal suture maturation stages for each model. RESULTS: Resnet50 demonstrated an accuracy of 99.74 % in identifying the transverse plane that contained the complete midpalatal suture. The highest accuracies achieved on the two-stage, three-stage, and five-stage maturation classification tests were 95.15, 88.06, and 75.37 %, all of which exceeded the average accuracy of three experienced orthodontists. CONCLUSIONS: The CNN model can locate the plane of the midpalatal suture in CBCT images and can assist clinicians in assessing the maturation stage of the midpalatal suture to select the means of maxillary expansion. CLINICAL SIGNIFICANCE: The application of artificial intelligence on CBCT midpalatal suture plane localisation and maturation stage evaluation enhances diagnostic and treatment efficiency and accuracy of individual assessment of midpalatal suture calcification degree. Additionally, it assists the clinical palatal expansion technique in achieving ideal results.

Asunto(s)

RESUMEN

OBJECTIVE(S): This study compared buccal bone thickness, dental inclinations and maxillary transverse width dimensions changes between auxiliary beta-titanium expansion arch (AEA) and miniscrew-assisted rapid palatal expansion (MARPE). MATERIALS AND METHODS: The sample consisted of 29 patients, aged between 18 and 40 years, with transverse maxillary deficiency and treated without extractions, divided into two groups: group AEA: comprised 13 individuals (initial mean age: 29.23 ± 9.13 years) treated using auxiliary beta-titanium expansion arch; group MARPE: comprised 16 patients (initial mean age: 24.92 ± 7.60 years) treated with miniscrew-assisted rapid palatal expansion. Buccal bone thickness, dental inclinations and transverse width dimensions (dental, nasal base and jugular) were measured in cone-bean computed tomographies at pre- and post-treatment stages. The variables were compared using the independent t-test. RESULTS: The buccal bone thickness was similar for both groups at the post-treatment stage. The second premolars were significantly more buccal inclined in the AEA group and the right maxillary first molars in the MARPE group. The intercanine and intermolar distances were statistically significantly greater in the MARPE group. Changes in dental arch transverse dimensions were significantly greater for the MARPE group. CONCLUSION: Both treatment protocols corrected the maxillary transverse discrepancy; however, MARPE provided greater correction.

Asunto(s)

RESUMEN

A expansão rápida da maxila (ERM) representa o procedimento gold-standard para correção da deficiência transversal do arco dentário superior. Porém, a idade é fator limitante para o sucesso da ERM convencional. Recentemente, a expansão rápida da maxila assistida por mini-implantes (MARPE) ampliou o limite de idade para separação da sutura palatina mediana (SPM), permitindo a correção minimamente invasiva da atresia maxilar, em pacientes adultos. O objetivo deste artigo foi relatar um caso clínico de um paciente adulto com mordida cruzada posterior tratado com MARPE, avaliar os efeitos transversais, o reparo da sutura palatina mediana (SPM) e a estabilidade da expansão após 8 meses de contenção. Paciente de sexo masculino, de 25 anos de idade, apresentava-se com mordida cruzada posterior bilateral, má oclusão de Classe III bilateral e estágio de maturação da SPM avançado. Foi indicado o tratamento com MARPE com 4 parafusos, posicionados parassuturalmente, seguido de tratamento compensatório para Classe III. Após a fase ativa da expansão o aparelho foi mantido por 12 meses como contenção. Após os 6 meses foram removidas as hastes do expansor e foi instalado o aparelho fixo, com uso de elásticos intermaxilares O reparo completo da SPM foi observada após um período de 12 meses de contenção. Após a ortodontia corretiva, uma adequada relação oclusal de molar Classe I foi alcançada (AU)

Rapid palatal expansion (RPE) represents the gold-standard procedure for correcting transverse maxillary dental arch deficiency. However, age is a limiting factor for the success of conventional RPE. Recently, mini-implant-assisted rapid palatal expansion (MARPE) has extended the age limit for midpalatal suture (MPS) separation, allowing for minimally invasive correction of maxillary atresia in adult patients. The aim of this article was to report a clinical case of an adult patient with posterior crossbite treated with MARPE, to evaluate the cross-sectional effects, midpalatal suture (MPS) repair and expansion stability after 8 months of retention. A 25-year-old male patient presented with bilateral posterior crossbite, bilateral Class III malocclusion, and advanced PMS maturation stage. Treatment with MARPE with 4 screws, positioned parasuturally, was indicated, followed by compensatory treatment for Class III. After the active phase of expansion, the appliance was kept for 12 months as a retainer. After 6 months, the expander rods were removed and the fixed appliance was installed using inter maxillary elastics. Complete PMS repair was observed after a period of 12 months of retention. After corrective orthodontics, an adequate Class I molar occlusal relationship was achieved (AU)

Asunto(s)

RESUMEN

Este estudo avaliou, em curto prazo, mudanças após a expansão rápida da maxila em pacientes respiradores bucais e correlacionou esses achados com a qualidade de vida dos pacientes. Este estudo teve como objetivo avaliar se a expansão rápida da maxila (ERM) está associada à melhora na qualidade de vida pós-tratamento. Foram avaliadas 35 crianças (média de idade 10,3 anos) com respiração bucal com hipoplasia maxilar. Os sintomas subjetivos foram avaliados por questionário padronizado de qualidade de vida, respondido pelos pacientes e seus pais ou responsáveis legais pré e pós-ERM. As condições respiratórias subjetivas do pré-tratamento apresentaram melhora significativa seis meses após a ERM. Concluiu-se que a ERM promoveu melhora na qualidade de vida dos pacientes com respiração bucal e hipoplasia maxilar (AU)

This study evaluated short-term changes after rapid maxillary expansion in mouth breathing patients and correlated these findings with their quality of life. This study aimed to evaluate whether rapid maxillary expansion (RME) is associated with improved post-treatment quality of life. Thirty-five mouth breathing children (mean age 10.3 years old) with maxillary hypoplasia were evaluated. Subjective symptoms were assessed by a standardized quality of life questionnaire, answered by patients and their parents or legal guardians before and after RME. Pre-treatment subjective respiratory conditions showed significant improvement six months after RME. It was concluded that RME improves the quality of life for patients with mouth breathing and maxillary hypoplasia (AU)

Asunto(s)