RESUMEN

The construction of semiconductor heterojunction is an effective way for charge separation in photocatalytic degradation of pollutants. In this study, a novel MoS2@MoO3/(Cu+/g-C3N4) ternary composites (MMCCN) was prepared via a simple calcination method. The as-prepared composites exhibited exceptional performance in activating peroxymonosulfate (PMS) for the degradation of rhodamine B (RhB). The activity testing results indicated that 99.41 % of RhB (10 mg·L-1, 10 mL) was effectively removed by the synergistic effect of composites photocatalyst (0.1 g·L-1) and PMS (0.1 g·L-1) under visible light irradiation for 40 min. Its reaction rate constant exceeded that of Cu+/g-C3N4, MoO3 and MoS2 by a factor of 3.56, 17.30 and 11.73 times, respectively. The crystal structure, band gap and density of states (DOS) of the semiconductors were calculated according to the density functional theory (DFT). Free radical trapping tests and electron spin resonance spectroscopy validated that 1O2, O2- and h+ are primary reactive species participating in the decomposition of RhB. The ternary composites demonstrated good stability and maintained excellent degradation efficiency even across four reaction cycles. Furthermore, the activation mechanism and the intermediates produced during the decomposition course of RhB by MMCCN/PMS/vis system were analyzed and elucidated. A double S-scheme heterojunctions was responsible for efficient separation of photo-induced electron-hole pairs. This work presents a novel method in the construction of double S-scheme heterojunctions for PMS activation which is expected to find wide applications in wastewater treatment and environmental remediation.

RESUMEN

Valorization of iron-rich metallurgical slags in the construction of Fenton-like catalysts has an appealing potential from the perspective of sustainable development. For the first time, copper smelting slag (CSS) was utilized as the precursor to synthesize hollow sea urchin-like Fe-Cu nanoreactors (Cu1.5Fe1Si) to activate peroxymonosulfate (PMS) for chlortetracycline hydrochloride (CTC) degradation. The hyper-channels and nano-sized cavities were formed in the catalysts owing to the induction and modification of Cu, not only promoting the in-situ growth of silicates and the formation of cavities due to the etching of SiO2 microspheres, but also resulting the generation of nanotubes through the distortion and rotation of the nanosheets. It was found that 100 % CTC degradation rate can be achieved within 10 min for Cu1.5Fe1Si, 75 times higher than that of Cu0Fe1Si (0.0024 up to 0.18 M-1‧min-1). The unique nanoconfined microenvironment structure could enrich reactants in the catalyst cavities, prolong the residence time of molecules, and increase the utilization efficiency of active species. Density functional theory (DFT) calculations show that Cu1.5Fe1Si has strong adsorption energy and excellent electron transport capacity for PMS, and Fe-Fe sites are mainly responsible for the activation of PMS, while Cu assists in accelerating the Fe(II)/Fe(Ⅲ) cycle and promotes the catalytic efficiency. The excellent mineralization rate (83.32 % within 10 min) and efficient treatment of CTC in consecutive trials corroborated the high activity and stability of the Cu1.5Fe1Si. This work provides a new idea for the rational design of solid waste-based eco-friendly functional materials, aiming at consolidating their practical application in advanced wastewater treatment.

RESUMEN

In the domain of heterogeneous catalytic activation of peroxymonosulfate (PMS), high-valent metal-oxo (HVMO) species are widely recognized as potent oxidants for the abatement of organic pollutants. However, the generation selectivity and efficiency of HVMO are often constrained by stringent requirements for catalyst adsorption sites and electron transfer efficiency. In this study, a single-atom catalyst, CuSA/CNP&S, is synthesized featuring multiple types (planar/axial) of heteroatom coordination via an H-bond-assisted self-assembly strategy. It is confirmed that CuN3 active centers with axial S coordination are uniformly distributed in a carbon matrix modified by planar P atoms. CuSA/CNP&S activated PMS to selectively generate Cu(III)═OH species as the primary reactive oxygen species (ROS). The pseudo-first-order kinetic rate for bisphenol A degradation reached 1.51 min-1, a 17.57-fold increase compared to the unmodified CuSA/CN catalyst. Additionally, the CuSA/CNP&S catalyst demonstrates high efficiency and durability in removing contaminants from various aqueous matrices. Theoretical calculations and experimental results indicate that the intrinsic electric field generated by distal planar P atoms enhances electron transfer efficiency within the carbon matrix. Meanwhile, axial S coordination elevates the d-band center and tunes the eg * band broadening of Cu, thereby enhancing the adsorption selectivity for the terminal oxygen of PMS. This multitype coordination synergistically mitigates the issues of low selectivity and yield of HVMO species.

RESUMEN

Tetracycline (TC), a commonly used antibiotic in wastewater, poses environmental and health risks, thus demanding advanced catalysts for its effective removal. In this work, for the first time, we integrated cobalt ferrite (CoFe2O4) and MXene quantum dots (MQDs) to form magnetic heterojunctions for rapid degradation of TC in the presence of peroxymonosulfate (PMS). Anchoring MQDs on the CoFe2O4 nanoparticles remarkably promoted the overall degradation rate of TC to 98.2% within 20 min via both radical and non-radical pathways. The first-order kinetic constant was 0.170 min-1, 3.5 and 15.5 times higher than that of CoFe2O4 and MQDs alone, respectively. Quenching experiments revealed that the addition of p-benzoquinone (p-BQ) and furfuryl alcohol (FFA) reduced the degradation of TC within 20 min to 56.2% and 28.4%, respectively, indicating that the primary reactive oxygen species for TC degradation in the CoFe2O4/MQDs + PMS system are •O2- and 1O2. CoFe2O4/MQDs also exhibited superparamagnetic property, which enabled their effective recovery by external magnetic field. Their reusability was verified by retaining 81.4% of catalytic efficacy in the consecutive 8th cycle. The CoFe2O4/MQDs + PMS system also exhibited excellent practicability in natural water samples as the degradation rates in both tap water and lake water environments exceeded 90%. Three potential pathways for TC degradation were proposed based on the liquid chromatography-mass spectrometry (LC-MS) characterizations and TC progressively transformed into 13 intermediates. This work may contribute to the ongoing efforts to develop advanced catalysts and strategies for mitigating the environmental impact of antibiotic pollution, offering a pathway toward sustainable and efficient water treatment technologies.

RESUMEN

Introduction: As the psychological impact and decreased quality of life experienced by women living with a Premenstrual Disorder (PMD) has been reported in the literature, the aim of this systematic review and thematic synthesis was to explore a) their experiences and the psychological impact of PMDs, specifically Premenstrual Syndrome (PMS) and Premenstrual Dysphoric Disorder (PMDD), and b) their perceived support needs. Method: Six databases were searched for publications reporting on qualitative studies, since the database inception. The Preferred Reporting Items for Systematic Review and Meta-Analysis guidelines were followed. Results: Seventeen papers reporting on 479 women met the inclusion criteria: ten focused on PMS, six on PMDD and one on PMS and PMDD combined. Two main PMD themes were identified: 1) controlled by PMDs, which had three subthemes, and 2) a women and life left broken, with five subthemes. Conclusion: Women's accounts revealed that experiences of PMDs were intense, life changing and life-controlling. Women were left holding the responsibility of understanding and managing their own condition, whilst advocating for themselves in a healthcare setting in which their condition has been little understood. Consequently, women developed coping strategies to lead a functional life, and experienced changes to their sense of self. Clinical recommendations included the need for professionals working with women in crisis, to assess for PMDs and signpost towards specialist services.

RESUMEN

BACKGROUND: The effects of weather on the severity of menstrual symptoms have been a topic of interest and research for many years. While some studies have shown a correlation between weather conditions and increased severity of menstrual symptoms, others have found no significant relationship. OBJECTIVE: The current study aimed to assess the effects of weather on the severity of menstrual symptoms among women going to college and high school in the southern regions of Saudi Arabia. METHODS: A descriptive cross-sectional study was conducted targeting all women going to college and high school in southern regions of Saudi Arabia. An online questionnaire was used for data collection. The data were entered and analyzed in IBM SPSS Statistics for Windows, version 26 (IBM Corp., Armonk, NY), and stored with no attempts to identify the participants. RESULTS: The study included 484 participants; most of them were 20-30 years old; 64.5% had regular menstrual cycles. It was observed that mood fluctuations, bloating, difficulty concentrating, breast pain, irritability, anxiety, social isolation, feeling tired, headaches, and mood changes are all affected to some degree before and during menstruation. On the other hand, the amount of blood, duration of the course, physical activity during menstruation, nutritional habits, lower back pain, and sleep disorders showed varying percentages of impact. These findings provide valuable insights into the physiological and psychological changes that occur during the menstrual cycle. CONCLUSION: In conclusion, the relationship between weather and the severity of menstrual symptoms is a complex and multifaceted topic. While some women may perceive a correlation between certain weather conditions and an increase in symptom severity, the scientific evidence in support of this connection is still limited and inconclusive. Further research is needed to better understand the underlying mechanisms and to provide evidence-based recommendations for managing menstrual symptoms in relation to weather conditions.

RESUMEN

Repeat-mediated deletions (RMDs) are a type of deletion rearrangement that utilizes two repetitive elements to bridge a DNA double-strand break (DSB) that leads to loss of the intervening sequence and one of the repeats. Sequence divergence between repeats causes RMD suppression and indeed this divergence must be resolved in the RMD products. The mismatch repair factor, MLH1, was shown to be critical for both RMD suppression and a polarity of sequence divergence resolution in RMDs. Here, we sought to study the interrelationship between these two aspects of RMD regulation (i.e., RMD suppression and polar divergence resolution), by examining several mutants of MLH1 and its binding partner PMS2. To begin with, we show that PMS2 is also critical for both RMD suppression and polar resolution of sequence divergence in RMD products. Then, with six mutants of the MLH1-PMS2 heterodimer, we found several different patterns: three mutants showed defects in both functions, one mutant showed loss of RMD suppression but not polar divergence resolution, whereas another mutant showed the opposite, and finally one mutant showed loss of RMD suppression but had a complex effect on polar divergence resolution. These findings indicate that RMD suppression vs. polar resolution of sequence divergence are distinct functions of MLH1-PMS2.

RESUMEN

Peroxymonosulfate-based advanced oxidation process (PMS-AOP) has shown great potential in sewage purification, and catalyst development capable of efficient PMS activation is a key while challenging element. Herein we reported a facile electro-explosive route to synthesize the oxygen vacancy (Vo)-enriched Mo/MoO2 without using chemical reagents. The detailed studies suggested that the synergy of Mo active site and Vo in the catalyst significantly boosted the activation kinetics of PMS. Evidently, the Mo site of different oxidation states contributed to chemical activation of PMS, while the Vo favored the activation of PMS and the generation of non-radical 1O2 species. As a result, the Mo/MoO2-10 h/PMS system delivered a complete removal of acid orange 7 (AO7) within 4 min, significantly exceeding the activity of Mo/PMS (16%), MoO2-H/PMS (25%) and most of other PMS-based systems. Moreover, the current system showed high potential for removal of different pollutants including antibiotics and organic dyes. Radical quenching experiments and electron paramagnetic resonance (EPR) studies revealed that the 1O2 species was significant for AO7 decomposition. This work provided a novel strategy to a batch-scale synthesis of high-performance PMS activator for water remediation in practice.

RESUMEN

"White pollution" is regarded as one of the most serious problems in the natural environment. Thus greener recycling of plastic waste has attracted significant efforts in recent research. In this study, to kill two birds with one stone, a series of porous carbon nanobulks (PCNs) were synthesized from the pyrolysis of plastic waste (polyethylene terephthalate, PET) and inorganic salt (including NaHCO3, Na2CO3, NaCl, and ZnCl2) for sulfadiazine (SDZ) degradation via peroxymonosulfate (PMS) activation. PCNs-1 (co-calcinated from PET and NaHCO3) with a large number of CO and COOH active sites, which were in favor of PMS activation and electron transfer during the catalytic process, had shown the best catalytic activity for SDZ degradation. Significantly, PCNs-1 exhibited excellent universality, adaptability, and stability. The degradation pathways of SDZ were identified by the total content of organic carbon (TOC), and high-resolution mass spectrometry (HR-MS). The possible mechanism was proposed according to the anion effect, quenching experiments, electron paramagnetic resonance (EPR), and electrochemical analysis, indicating that radical (OH, SO4-, O2-) and non-radical (1O2 and e) species were the catalytically active species for SDZ decomposition in the PCNs-1/PMS system. Moreover, Ecological Structure-Activity-Relationship Model (ECOSAR) program and wheat seed cultivation experiments clearly demonstrated that the biotoxicity of SDZ could be effectively reduced by the PCNs-1/PMS system. Here we successfully upcycled plastic waste into high-value materials for efficient water decontamination.

RESUMEN

Polyaniline (PANI) and Saccharina Japanica seaweed (kelp) biochar (KBC) composites were synthesized in-situ through polymerization. This study presents a novel approach to the degradation of sulfamethoxazole (SMX), a prevalent antibiotic, using a PANI-KBC composite to activate peroxymonosulfate (PMS). Extensive characterizations of the PANI-KBC composite were conducted, resulting in successful synthesis, uniform distribution of PANI on the biochar surface, and the multifunctional role of PANI-KBC in SMX degradation. A removal efficiency of 97.24% for SMX (10 mg L-1) was attained in 60 min with PANI-KBC (0.1 g L-1) and PMS (1.0 mM) at pH 5.2, with PANI-KBC showing effectiveness (>92%) across a pH range of 3.0-9.0. In the degradation of SMX, both radical (SO4•- and •OH) and non-radical (1O2 and electron transfer) pathways are involved. The reaction processes are critically influenced by the roles of SO4•-, 1O2 and electron transfer mechanisms. It was suggested that pyrrolic N, oxidized sulfur (-C-SO2-C-), structural defects, and O-CO were implicated in the production of 1O2 and electron transfer processes, respectively, and a portion of 1O2 originated from the conversion of O2•-. The study evaluated by-product toxicity, composite reusability, and stability, confirming its practical potential for sustainable groundwater remediation.

Asunto(s)

RESUMEN

BACKGROUND: The prevalence and consequences of premenstrual dysphoric disorder (PMDD) and premenstrual syndrome (PMS) among Saudi women are not well understood. Consequently, the purpose of this research is to ascertain the frequency, course, and contributing factors of PMDD and PMS in the Asir area of Saudi Arabia. METHODS: A cross-sectional study was conducted in Asir, Saudi Arabia, using a pre-designed questionnaire distributed among adult female patients to five primary healthcare facilities (PHCs) that were chosen at random in the Asir Region. Data were analyzed using IBM Statistical Package for the Social Sciences (SPSS, version 15). RESULTS: The study included 506 participants; 81% of them were Saudi and 19% were non-Saudi. A percentage (46.2%) of the participants were aged between 21 and 30 years old. A total of 369 (72.9%) participants have PMS. Regarding PMS symptoms, 79.1% reported mood changes, 59.3% tantrums, 56.7% change in appetite, 47% acne, 41.9% back and joint pain, and 43.1% reported sleep disorders. Almost half (42.1%) of the participants receive treatment to relieve the symptoms of PMS (72% of them receive paracetamol and 6.1% receive nonsteroidal anti-inflammatory drugs (NSAIDs)). Some (6.4%) exercise during the menstrual cycle to relieve symptoms of PMS, while 31% eat healthy foods at the time of period to relieve the symptoms of PMS. CONCLUSION: The prevalence of PMS/PMDD was among the reported figures worldwide. There was a significant association between age and the use of contraceptives with symptoms of PMS/PMDD among the studied sample.

RESUMEN

N-(1,3-dimethylbutyl)-N'-phenyl-p-phenylenediamine quinone (6PPD-Q) has been identified to induce acute toxicity to multifarious aquatic organisms at exceptionally low concentrations. The ubiquity and harmful effects of 6PPD-Q emphasize the critical need for its degradation from water ecosystems. Herein, we explored the transformation of 6PPD-Q by an ultraviolet-activated peroxymonosulfate (UV/PMS) system, focusing on mechanism, products and toxicity variation. Results showed that complete degradation of 6PPD-Q was achieved when the initial ratio of PMS and 6PPD-Q was 60:1. The quenching experiments and EPR tests indicated that SO4•- and •OH radicals were primarily responsible for 6PPD-Q removal. Twenty-one degradation products were determined through high-resolution orbitrap mass spectrometry, and it was postulated that hydroxylation, oxidative cleavage, quinone decomposition, ring oxidation, as well as rearrangement and deamination were the major transformation pathways of 6PPD-Q. Toxicity prediction revealed that all identified products exhibited lower acute and chronic toxicities to fish, daphnid and green algae compared to 6PPD-Q. Exposure experiments also uncovered that 6PPD-Q considerably reduced the community diversity and altered the community assembly and functional traits of the sediment microbiome. However, we discovered that the toxicity of 6PPD-Q degradation solutions was effectively decreased, suggesting the superior detoxifying capability of the UV/PMS system for 6PPD-Q. These findings highlight the underlying detrimental impacts of 6PPD-Q on aquatic ecosystems and enrich our understanding of the photochemical oxidation behavior of 6PPD-Q.

Asunto(s)

RESUMEN

Colorectal cancer (CRC) is the third most prominent cancer worldwide, and the second leading cause of cancer death. Poor outcomes and limitations of current treatments fuel the search for new therapeutic options. Curcumin (CUR) is often presented as a safer alternative for cancer treatment with a staggering number of molecular targets involved in tumor initiation, promotion, and progression. Despite being promising, its therapeutic potential is hindered due to its hydrophobic nature. Hence, the ongoing development of optimal delivery strategies based on nanotechnology, such as polymeric micelles (PMs), to overcome issues in CUR solubilization and delivery to tumor cells. In this sense, this study aimed to optimize the development and stability of CUR-loaded P123:F127:TPGS PMs (PFT:CUR) based on the thin-film approach and evaluate their therapeutic potential in CRC. Overall, the results revealed that the solubility of CUR was improved when room temperature was used to hydrate the film. The PFT-CUR hydrated at room temperature presents an average hydrodynamic diameter of 15.9 ± 0.3 nm with a polydispersity index (PDI) of 0.251 ± 0.103 and a zeta potential of -1.5 ± 1.9 mV, and a 35.083 ± 1.144 encapsulation efficiency (EE%) and 3.217 ± 0.091 drug loading (DL%) were observed. To ensure the stability of the optimized PFT-CUR nanosystems, different lyophilization protocols were tested, the use of 1% of glycine (GLY) being the most promising protocol. Regarding the critical micellar concentration (CMC), it was shown that the cryoprotectant and the lyophilization process could impact it, with an increase from 0.064 mg/mL to 0.119 mg/mL. In vitro results showed greater cytotoxic effects when CUR was encapsulated compared to its free form, yet further analysis revealed the heightened cytotoxicity could be attributed to the system itself. Despite challenges, the developed CUR-loaded PM shows potential as an effective therapeutic agent for CRC. Nonetheless, the system must undergo refinements to enhance drug entrapment as well as improve overall stability.

Asunto(s)

RESUMEN

BACKGROUND: Premenstrual syndrome (PMS) is a commonly underestimated disorder that negatively impacts a woman's life. Medical workers, who live a more stressful life, may report an increased rate of PMS. Studies on the relationship between PMS and work-related quality of life for medical professionals are scarce, particularly in the Arab world. This study aimed to compare the frequency of PMS among medical versus non-medical workers at Zagazig University and to assess the association between PMS and their work-related quality of life. METHODS: A comparative cross-sectional study was conducted. The sample population consisted of 48 medical and 48 non-medical female workers aged 18-45 years from Zagazig University. The two groups filled out a questionnaire with 3 parts: sociodemographic and occupational data, the Premenstrual Symptoms Screening Tool (PSST), and the Work-Related Quality of Life Scale (WRQL). RESULTS: Severe PMS was reported in 45.8% of medical workers versus 20.8% of non-medical workers with a statistically significant difference between both groups (p = 0.009). Binary logistic regression showed that being a medical worker, clinical specialty, ≥ 8 years of work, ≥ 24 working hours per week, and having a non-set hourly schedule were predictors for severe PMS. PMS was found to be a statistically significant predictor of poor WRQL (p < 0.001). There was a highly significant negative correlation between the PMS score and the WRQL score (r = - 0.302, p < 0.001). CONCLUSION: Among medical workers, PMS is more common and more severe, and WRQL is worse and negatively correlated with PMS. We suggest further studies with larger samples to prove this association and planning for public health programs to screen for and manage PMS among medical workers in our community.

RESUMEN

Dissolved organic matter (DOM) is a widely occurring substance in rivers that can strongly complex with heavy metal ions (HMIs), severely interfering with the electrochemical signal of anodic stripping voltammetry (ASV) and reducing the detection accuracy of HMIs in water. In this study, we investigated a novel advanced oxidation process (AOP) that involves the activation of peroxymonosulfate (PMS) using low-pressure ultraviolet (LPUV) radiation and CoFe2O4 photocatalysis. This novel AOP was used for the first time as an effective pretreatment method to break or weaken the complexation between HMIs and DOM, thereby restoring the electrochemical signals of HMIs. The key parameters, including the PMS concentration, CoFe2O4 concentration, and photolysis time, were optimized to be 6 mg/L, 12 mg/L, and 30 s for eliminating DOM interference during the electrochemical analysis of HMIs via LPUV/CoFe2O4-based photolysis. Investigations of the microstructure, surface morphology, specific surface area, and pore volume of CoFe2O4 were conducted to reveal the exceptional signal recovery capability of LPUV/CoFe2O4/PMS-based photolysis in mitigating interference from DOM during HMIs analysis. The PMS activation mechanism, which is critical to the signal recovery process, was elucidated by analyzing the reactive oxygen species (ROS) and the surface elemental composition of CoFe2O4. Additionally, the degradation and transformation behavior of humus-HMIs complexes were analyzed to study the mechanism of ASV signal recovery further. Notably, the detection results of HMIs in actual water samples obtained using the proposed pretreatment method were compared with those obtained from ICP-MS, yielding an RMSE less than 0.04 µg/L, which indicated the satisfactory performance of the proposed pretreatment method for the ASV detection of HMIs in complex actual samples.

Asunto(s)

RESUMEN

In this work, it was found that peroxymonosulfate (PMS) could appreciably accelerate the transformation rates of dichloroacetonitrile (DCAN) and trichloracetonitrile (TCAN) in aqueous solutions, especially under alkaline pHs. The impact of reactive oxygen species scavengers (methyl alcohol for sulfate radical, tert-butyl alcohol for hydroxyl radical, and azide for singlet oxygen) and water matrices (chloride (Cl-), bicarbonate (HCO3-), and natural organic matter (NOM)) on DCAN and TCAN transformation by PMS is evaluated, revealing negligible effects. A nucleophilic hydrolysis pathway, as opposed to an oxidation process, was proposed for the transformation of DCAN and TCAN by PMS, supported by the hydrolyzable characteristics of these compounds and validated through density functional theory calculations. Kinetic analysis indicated that the transformation of DCAN and TCAN by PMS adhered to a second-order kinetic law, with higher reaction rates observed at elevated pH levels within the range of 7.0-10.0. Kinetic modeling incorporating the hydrolytic contributions of water, hydroxyl ion, and protonated and deprotonated PMS (i.e., HSO5- and SO52-) effectively fitted the experimental data. Species-specific second-order rate constants reveal that SO52- exhibited significantly higher reactivity towards DCAN ((1.69 ± 0.22) × 104 M-1h-1) and TCAN ((6.06 ± 0.18) × 104 M-1h-1) compared to HSO5- ((2.14 ± 0.12) × 102 M-1h-1) for DCAN; and (1.378 ± 0.11) × 103 M-1h-1 for TCAN). Comparative analysis of DCAN and TCAN transformation efficiencies by four different oxidants indicated that PMS rivaled chlorine but falls short of hydrogen peroxide, with peroxydisulfate displaying negligible reactivity. Overall, this study uncovers the nucleophilic hydrolysis characteristics of PMS, supplementing its recognized role as an oxidant precursor or mild oxidant, and underscores its significant implications for environmental remediation.

Asunto(s)

RESUMEN

Premenstrual dysphoric disorder (PMDD) is a severe variant of premenstrual syndrome (PMS), categorized as a mood disorder due to marked symptoms of depression and anxiety, compounded with severe physical symptoms. Female sexual dysfunction (FSD) can manifest as low libido, difficulty achieving sexual pleasure, and dyspareunia, causing functional and psychological distress. PMDD and FSD are globally prevalent conditions with postulated biological, psychological, and social associations between them. Nevertheless, sexual dysfunction in PMDD is an important aspect of women's health that has been understudied and has notable methodological limitations. In this narrative review, we summarize the existing literature on sexual function in women with PMDD and PMS, specify the distinctions between PMDD and other general symptoms of PMS, highlight the significance of understanding sexual dysfunction in the female population, and outline some available therapeutic options. Studies show that women frequently experience debilitating sexual distress during the premenstrual phase; however, there is an essential need to formulate standardized tools for definite diagnosis. Selective serotonin re-uptake inhibitors (SSRIs) and combined oral contraceptive pills (COCPs) are approved medications for PMDD, while flibanserin and bremelanotide are effective in treating FSD. However, the potential effects of these treatment modalities on the two comorbid conditions render them inconclusive. Awareness of PMDD and FSD among clinicians and society can allow the implementation of targeted interventions to alleviate the suffering of women and enhance their quality of life.

RESUMEN

The degradation of persistent and refractory pollutants, particularly plastic and resins manufacturing wastewater, poses a significant challenge due to their high toxicity and high concentrations. This study developed a novel hybrid ACoO3 (A = La, Ce, Sr)/PMS perovskite system for the treatment of multicomponent (MCs; ACN, ACM and ACY) from synthetic resin manufacturing wastewater. Synthesized perovskites were characterized by various techniques i.e., BET, XRD, FESEM with EDAX, FTIR, TEM, XPS, EIS, and Tafel analysis. Perovskite LaCoO3 exhibited the highest degradation of MCs i.e., ACN (98.7%), ACM (86.3%), and ACY (56.4%), with consumption of PMS (95.2%) under the optimal operating conditions (LaCoO3 dose 0.8 g/L, PMS dose 2 g/L, pH 7.2 and reaction temperature 55 °C). The quantitative contribution (%) of reactive oxygen species (ROS) reveals that SO4•- are the dominating radical species, which contribute to ACN (58.3% for SO4•- radicals) and ACM degradation (46.4% for SO4•- radicals). The tafel plots and EIS spectra demonstrated that perovskites LaCoO3 have better charge transfer rates and more reactive sites that are favorable for PMS activation. Further, four major degradation pathways were proposed based on Fukui index calculations, as well as GC-MS characterization of intermediate byproducts. Based on a stability and reusability study, it was concluded that LaCoO3 perovskites are highly stable, and minimal cobalt leaching occurs (0.96 mg/L) after four cycles. The eco-toxicity assessment performed using QSAR model indicated that the byproducts of the LaCoO3/PMS system are non-toxic nature to common organism (i.e., fish, daphnids and green algae). In addition, the cost of the hybrid LaCoO3/PMS system in a single cycle was estimated to be $34.79 per cubic meter of resin wastewater.

Asunto(s)

RESUMEN

Nowadays, biochar is extensively used in wastewater remediation with the aim of achieving water security and circularity with minimal impacts on ecosystems and the environment. In this study, digestate biochar was prepared and modified using different methods and then employed as a peroxymonosulfate (PMS) activator to oxidize oxytetracycline, a model antibiotic pollutant in wastewater. The optimal biochar catalyst was characterized, spin trapping tests were carried out to confirm the dominant catalytic mechanism, and in silico toxicity prediction was conducted based on structure-activity relationships. Assessment of the catalytic performance of the pristine and engineered biochar showed that nitrogen doping increased oxytetracycline degradation efficiency by 1.92-fold (i.e., 100% oxytetracycline degradation with the engineered biochar compared to 52% with pristine biochar), while pyrrolic nitrogen was identified as a major PMS activation site. It was discovered that several parameters, such as catalyst dose, pH, PMS concentration, and competing ions, affected oxytetracycline degradation efficiencies. Additionally, the toxicity of the degradation intermediate was studied. Scavenger trapping tests showed that 1O2 and SO4•- were the most prevalent species during oxytetracycline degradation in the system, with four possible degradation pathways proposed, including secondary alcohol oxidation, hydroxylation, dehydration, and deamidation. Overall, it is anticipated that this study would contribute to our understanding of metal-free biochar activation of PMS as an attractive treatment scheme for antibiotic-polluted water.

Asunto(s)