RESUMEN

Water is ubiquitous in various heterogeneous catalytic reactions, where it can be easily adsorbed, chemically dissociated, and diffused on catalyst surfaces, inevitably influencing the catalytic process. However, the specific role of water in these reactions remains unclear. In this study, we innovatively propose that H2O-driven surface lattice oxygen activation in γ-MnO2 significantly enhances low-temperature NH3-SCR. The proton from water dissociation activates the surface lattice oxygen in γ-MnO2, giving rise to a doubling of catalytic activity (achieving 90% NO conversion at 100 °C) and remarkable stability. Comprehensive in situ characterizations and calculations reveal that spontaneous proton diffusion to the surface lattice oxygen reduces the orbital overlap between the protonated oxygen atom and its neighboring Mn atom. Consequently, the Mn-O bond is weakened and the surface lattice oxygen is effectively activated to provide excess oxygen vacancies available for converting O2 into O2-. Therefore, the redox property of Mn-H is improved, leading to enhanced NH3 oxidation-dehydrogenation and NO oxidation processes, which are crucial for low-temperature NH3-SCR. This work provides a deeper understanding and fresh perspectives on the water promotion mechanism in low-temperature NOx elimination.

RESUMEN

Mammalian cysteamine dioxygenase (ADO), a mononuclear non-heme Fe(II) enzyme with three histidine ligands, plays a key role in cysteamine catabolism and regulation of the N-degron signaling pathway. Despite its importance, the catalytic mechanism of ADO remains elusive. Here, we describe an HPLC-MS assay for characterizing thiol dioxygenase catalytic activities and a metal-substitution approach for mechanistic investigation using human ADO as a model. Two proposed mechanisms for ADO differ in oxygen activation: one involving a high-valent ferryl-oxo intermediate. We hypothesized that substituting iron with a metal that has a disfavored tendency to form high-valent states would discriminate between mechanisms. This chapter details the expression, purification, preparation, and characterization of cobalt-substituted ADO. The new HPLC-MS assay precisely measures enzymatic activity, revealing retained reactivity in the cobalt-substituted enzyme. The results obtained favor the concurrent dioxygen transfer mechanism in ADO. This combined approach provides a powerful tool for studying other non-heme iron thiol oxidizing enzymes.

Asunto(s)

RESUMEN

Environmental persistent free radicals (EPFRs) derived from chlorophenols, triggered by light or heat exposure, pose significant ecological concerns, yet the impact of chlorine substituents on EPFRs formation and reactivity remains inadequately understood. Through an intentional synthesis of chlorophenol-derived EPFRs with varying chlorine contents and positioning, we elucidated the role of chlorine in the photoactivation of molecular oxygen. Our combined experimental and theoretical analysis reveals that these EPFRs are primarily oxygen-centered phenoxy radicals, establishing a direct link between chlorine substitution patterns and their ability to activate molecular oxygen under visible light. Increased chlorine content enhances EPFRs formation by elevating the positive charge on the phenolic hydroxyl group's hydrogen atom, facilitating its removal. Moreover, the capability of EPFRs to activate molecular oxygen was directly correlated with chlorine content, with 2,3,5,6-tetrachlorophenol-derived EPFRs showcasing the highest activity. This activity is attributed to their structural propensity for TCSQ·- species generation. Furthermore, our study established a significant correlation between the toxicity and activity of EPFRs, emphasizing the critical role of halogen substituents in determining the reactivity of EPFRs. These insights contribute to our understanding of their environmental and toxicological ramifications, underscoring the imperative for continued research aimed at mitigating their detrimental impacts.

RESUMEN

Oxygen vacancy engineering in transition metal oxides is an effective strategy for improving catalytic performance. Herein, defect-enriched Mn2O3 catalysts were constructed by controlling the calcination temperature. The high content of oxygen vacancies and accompanying Mn4+ ions were generated in Mn2O3 catalysts calcined at low temperature, which could greatly improve the low-temperature reducibility and migration of surface oxygen species. DFT theoretical calculations further confirmed that molecular oxygen and toluene were easily adsorbed over defective α-Mn2O3 (222) facets with an energy of -0.29 and -0.48 eV, respectively, and corresponding OO bond length is stretched to 1.43 Å, resulting in the highly reactive oxygen species. Mn2O3-300 catalyst with abundant oxygen vacancies exhibited the highest specific reaction rate and lowest activation energy. Furthermore, the optimized catalyst possessed the outstanding stability, water tolerance and CO2 yield. In comparison with the fresh Mn2O3-300 catalyst, the physical structure and surface property of the used catalyst remained almost unchanged regardless of whether undergoing the stability test at consecutive catalytic runs as well as high temperature, and water resistance test. In situ DRIFTS spectra further elucidated that introducing the water vapor had little effect on the reaction intermediates, indicating the excellent durability of the defect-enriched catalyst.

RESUMEN

Graphite carbon nitride (g-C3N4) is a promising photocatalyst,but its inadequate reactive sites, weak visible light responsiveness, and sluggish separation of photogenerated carriers hamperthe improvement of photodegradation efficiency. In this work, potassium (K) and halogen atoms co-modified g-C3N4 photocatalysts (CN-KX, X = F, Cl, Br, I) were constructed to adjust the electrical and band structure for enhanced generation of reactive oxygen species. Through an integration of theoretical calculation and experimental exploration, the doping sites of halogen atoms as well as the evolution of crystal, band, and electronic structures were investigated. The results show that a covalent bond is formed between the F atom and the C atom, substitution of the N atom occurs with a Cl atom, and doping of Br, I, or K atoms takes place at the interstitial site. CN-KX photocatalysts exhibits lower band gap, faster photogenerated electron migration, and enhanced photocatalytic activity. Specifically, the CN-KI photocatalyst exhibits the highest photodegradation efficiency because of its smaller interplanar spacing, formation of the midgap state, and adjustable local electron density. Equally, the doping of I atom not only provides a stable adsorption site for oxygen (O2) but also facilitates electron transfer, promoting the production of superoxide radicals (O2-) and contributing to the process of photodegradation.

RESUMEN

Hydrogen peroxide (H2O2) is a crucial eco-friendly oxidizer with increasing demand due to its wide range of applications. Activating O2 with catalysts to generate H2O2 on-site offers a promising alternative to traditional production methods. Here, we design unique crystalline/amorphous heterophase Fe-Mn core-shell chains (ZVI-Mn) for efficient on-site generation of H2O2 and manipulation of subsequent H2O2 activation. The yield of H2O2 on-site produced by ZVI-Mn in water within 5 min was 103.7 mg·L-1, which was much greater than that of zero-valent iron (ZVI) and amorphous Mn (A-Mn) (0 and 42.5 mg·L-1). Raman and density functional theory (DFT) calculations confirmed that *OOH is the key species involved in the on-site generation of H2O2. Electrochemical tests confirmed the excellent electron-transferring ability, while electron paramagnetic resonance (EPR) revealed oxygen vacancy defects in the catalysts, which proved to be conducive to improving the catalytic activity of ZVI-Mn. Additionally, by regulating the pH of aqueous solution, ZVI-Mn can simultaneously achieve efficient on-site generation of H2O2 and in-situ removal of enrofloxacin from aqueous solution.

RESUMEN

Helicenes represent a class of fascinating π compounds with fused yet folded backbones. Despite their broad structural diversity, harnessing helicenes to develop well-defined materials is still a formidable challenge. Here we report the synthesis of crystalline porous helicene materials by exploring helicenes to synthesize covalent 2D lattices and layered π frameworks. Topology-directed polymerization of [6]helicenes and porphyrin creates 2D covalent networks with alternate helicene-porphyrin alignment along the x and y directions at a 1.5-nm interval and develops [6]helicene frameworks through reversed anti-AA stack along the z direction to form segregated [6]helicene and porphyrin columnar π arrays. Notably, this π configuration enables the frameworks to be highly red luminescent with benchmark quantum yields. The [6]helicene frameworks trigger effieicnt intra-framework singlet-to-singlet state energy transfer from [6]helicene to porphyrin and facilitate intermolecular triplet-to-triplet state energy transfer from frameworks to molecular oxygen to produce reactive oxygen species, harvesting a wide range of photons from ultraviolet to near-infrared regions for light emitting and photo-to-chemical conversion. This study introduces a new family of extended frameworks, laying the groundwork for exploring well-defined helicene materials with unprecedented structures and functions.

RESUMEN

Conjugated polymers (CPs) have shown promising potential in the field of hydrogen peroxide (H2O2) photosynthesis. However, a deeper understanding of the interactions between building units and specific functional groups within the molecular skeleton is necessary to elucidate the mechanisms driving H2O2 generation. Herein, a series of typical donor-acceptor (D-A) conjugated polymers (B-B, B-CN, B-DCN) were synthesized by introducing different amounts of cyano groups (-CN) into the molecular skeleton. The strong electron withdrawing properties of cyano can greatly promote the effective separation and transfer of photogenerated charges between building units, resulting in an impressive efficiency of H2O2 generation (2128.5 µmol g-1 h-1) for B-DCN, representing a 96-fold enhancement compared to B-B. More importantly, experimental results and theoretical calculations further revealed that the introduction of -CN can markedly reduce the adsorption energy (Ead) of O2, while serving as an active site to induce the conversion of crucial intermediate superoxide anions (.O2-) into singlet oxygen (1O2), achieving dual-channel H2O2 generation (O2→.O2-→H2O2, O2→.O2-→1O2→H2O2). This work provides valuable insights into the design of efficient H2O2 photosynthesis materials.

RESUMEN

The design of electrocatalysts for oxygen evolution reaction (OER) remains a limitation of industrial hydrogen production by electrolysis of water. Excellent and stable OER catalysts can be developed by activating lattice oxygen and changing the reaction path. Herein, S and FeOOH on the Co(OH)2 nanoneedle arrays are introduced to construct a heterostructure (S-FeOOH/Co(OH)2/NF) as a proof of concept. Theoretical calculations and experimental suggest that the Co-O-Fe motif formed at the heterogeneous interface with the introduction of FeOOH, inducing electron transfer from Co to Fe, enhancing Co─O covalency and reducing intramolecular charge transfer energy, thereby stimulating direct intramolecular lattice oxygen coupling. Doping of S in FeOOH further accelerates electron transfer, improves lattice oxygen activity, and prevents dissolution of FeOOH. Consequently, the overpotential of S-FeOOH/Co(OH)2/NF is only 199 mV at 10 mA cm-2, and coupled with the Pt/C electrode can be up to 1 A cm-2 under 1.79 V and remain stable for over 120 h in an anion exchange membrane water electrolyzer (AEMWE). This work proposes a strategy for the design of efficient and stable electrocatalysts for industrial water electrolysis and promotes the commercialization of AEMWE.

RESUMEN

Catalytic oxidation at mild conditions is crucial for mitigating the high pressure and high temperature challenges associated with current catalytic wet air oxidation (CWAO) technologies in wastewater treatment. Among potential materials for catalytic oxidation reactions, polycrystalline MnO2 existed in natural minerals holds considerable promise. However, the relationships between different crystal phases of MnO2 and their catalytic activity sources in aqueous phase remain uncertain and subject to debate. In this research, we synthesized various MnO2 crystal phases, comprising α-, ß-, δ-, γ-, ε-, and λ-MnO2, and assessed their catalytic oxidation efficiency during low-temperature heating for treatment of organic pollutants. Our findings demonstrate that λ-MnO2 exhibits the highest catalytic activity, followed by δ-MnO2, γ-MnO2, α-MnO2, ε-MnO2, and ß-MnO2. The variations in catalytic activity among different MnO2 are attributed to variances in their oxygen vacancy abundance and redox activity. Furthermore, we identified the primary active species, which include Mn3+ and superoxide radicals (•O2-) generated by surface lattice oxygen of MnO2. This research highlights the critical role of crystal phases in influencing oxygen vacancy content, redox activity, and overall catalytic performance, providing valuable insights for the rational design of MnO2 catalysts tailored for effective organic pollutant degradation in CWAO applications.

RESUMEN

As a most promising environmental technology, the substantial enhancement of photocatalytic efficiency is still a big challenge for practical applications. In this work, the surface of Bi2O2CO3 (BOC) nanotubes are modified by Cl and I. The as-obtained samples at different hydrothermal temperatures (T) are designated as T-X-BOC (X = Cl, I). X-ray diffraction (XRD), energy dispersive X-ray (EDX) spectroscopy and X-ray photoelectron spectroscopy (XPS) prove that Cl and I merely chemically adsorb on the BOC surface, rather than dope into the crystal lattice. The surface modification of Cl and I slightly increases light absorption range, while significantly promotes the photoelectron migration from bulk to the surface that greatly enhances the carrier separation efficiency. Density functional theory (DFT) calculations further prove that surface Cl and I have adjusted band structure and surface charge distribution. Besides, the surface Cl and I favor the O2 adsorption and trap the surface photoelectrons, thus promoting the formation of •O2-; while the surface Cl and I impede the surface adsorption of H2O, thus refraining the generation of •OH. In the degradation of rhodamine B (RhB), holes and •O2- radicals play the crucial role. Under ultraviolet light irradiation (λ < 420 nm) for 45 min, the RhB degradation ratios over 150-Cl-BOC (94%) and 150-I-BOC (85%) are 4.2 and 3.7 times higher than that of original BOC (18%), respectively. This work demonstrates that the simple surface halogenation modification greatly improves the photocatalytic activity.

Asunto(s)

RESUMEN

Indoor volatile formaldehyde is a serious health hazard. The development of low-temperature and efficient nonhomogeneous oxidation catalysts is crucial for protecting human health and the environment but is also quite challenging. Single-atom catalysts (SACs) with active centers and coordination environments that are precisely tunable at the atomic level exhibit excellent catalytic activity in many catalytic fields. Among two-dimensional materials, the nonmagnetic monolayer material g-C3N4 may be a good platform for loading single atoms. In this study, the effect of nitrogen defect formation on the charge distribution of g-C3N4 is discussed in detail using density functional theory (DFT) calculations. The effect of nitrogen defects on the activated molecular oxygen of Pt/C3N4 was systematically revealed by DFT calculations in combination with molecular orbital theory. Two typical reaction mechanisms for the catalytic oxidation of formaldehyde were proposed based on the Eley-Rideal (E-R) mechanism. Pt/C3N4-V3N was more advantageous for path 1, as determined by the activation energy barrier of the rate-determining step and product desorption. Finally, the active centers and chemical structures of Pt/C3N4 and Pt/C3N4-V3N were verified to have good stability at 375 K by determination of the migration energy barriers and ab initio molecular dynamics simulations. Therefore, the formation of N defects can effectively anchor single-atom Pt and provide additional active sites, which in turn activate molecular oxygen to efficiently catalyze the oxidation of formaldehyde. This study provides a better understanding of the mechanism of formaldehyde oxidation by single-atom Pt catalysts and a new idea for the development of Pt as well as other metal-based single-atom oxidation catalysts.

Asunto(s)

RESUMEN

Conventional advanced oxidation processes (AOPs) require significant external energy consumption to eliminate emerging contaminants (ECs) with stable structures. Herein, a catalyst consisting of nanocube BiCeO particles (BCO-NCs) prepared by an impregnation-hydrothermal process is reported for the first time, which is used for removing ECs without light/electricity or any other external energy input in water and simultaneous in situ generation of H2O2. A series of characterizations and experiments reveal that dual reaction centers (DRC) which are similar to the valence band/conducting band structure are formed on the surface of BCO-NCs. Under natural conditions without any external energy consumption, the BCO-NCs self-purification system can remove more than 80% of ECs within 30 min, and complete removal of ECs within 30 min in the presence of abundant electron acceptors, the corresponding second-order kinetic constant is increased to 3.62 times. It is found that O2 can capture electrons from ECs through the Bi─O─Ce bond bridge during the reaction process, leading to the in situ production of H2O2. This work will be a key advance in reducing energy consumption for deep wastewater treatment and generating important chemical raw materials.

RESUMEN

This work reports a carbon nitride with pyridinic nitrogen-vacancy (N2CV-CN), which purifies organic contaminants via an in-situ photo-self Fenton-like reaction. Experiments and calculations demonstrated that the nitrogen-vacancy induces lone-paired (LP) and symmetry-unpaired electrons, promoting the formation of low-energy LP-π hybridized orbitals and helping to overcome the pairing energy required for oxygen to accept electrons. Furthermore, the nitrogen-vacancy accelerates film and intra-particle diffusion rates of organic contaminants on N2CV-CN, creating beneficial conditions for reactive oxide species to mineralize organic contaminants. Under sunlight and atmospheric oxygen, a photo-self Fenton-like reaction involving proton-coupled electron transfer occurred on the surface of N2CV-CN. Furthermore, by integrating photocatalysis with flocculation, about 99.1 % suspended substance, 45.5 % chemical oxygen demand, and 38.4 % biological oxygen demand were reduced from polluted river-water. Constructing N2CV-CN and understanding its crucial role offer theoretical and methodological insights into the in-situ purification of contaminated water bodies.

RESUMEN

Despite the pivotal role of molecular oxygen (O2) activation in artificial photosynthesis, the activation efficiency is often restricted by sluggish exciton dissociation and charge transfer kinetics within polymer photocatalysts. Herein, we propose two tetrathiafulvalene (TTF)-based imine-linked covalent organic frameworks (COFs) with tailored donor-acceptor (D-A) structures, TTF-PDI-COF and TTF-TFPP-COF, to promote O2 activation. Because of enhanced electron push-pull interactions that facilitated charge separation and transfer behavior, TTF-PDI-COF exhibited superior photocatalytic activity in electron-induced O2 activation reactions over TTF-TFPP-COF under visible light irradiation, including the photosynthesis of (E)-3-amino-2-thiocyano-α,ß-unsaturated compounds and H2O2. These findings highlight the significant potential of the rational design of COFs with D-A configurations as suitable candidates for advanced photocatalytic applications.

RESUMEN

Ce-based three-dimensional (3D) mesoporous microspheres with Mn homogeneous incorporation were synthesized. The CeMn-0.4, characterized by a Ce/Mn molar ratio of 6:4, demonstrated exceptional catalytic activity and stability. The formation of CeMn solid solution strengthened the Ce-Mn interaction, yielding higher concentrations of Ce3+ and Mn4+. Mn4+ initiated toluene preliminary activation owing to its robust oxidative properties, while Ce3+ contributed to oxygen vacancy generation, enhancing the activation of gaseous oxygen and lattice oxygen mobility. Integrating experiments and Density Functional Theory (DFT) calculations elucidated the oxygen reaction mechanisms. A portion of oxygen was converted into surface reactive oxygen species (Oads) that directly oxidized toluene. Additionally, the presence of oxygen vacancies promoted the participation of oxygen in toluene oxidation by converting it into lattice oxygen, which was crucial for the deep oxidation of toluene. Diffuse Reflectance Fourier Transform Infrared Spectroscopy (DRIFTS) indicated the accumulation of benzene-ring intermediates on the catalyst surface hindered continuous toluene oxidation. Thus, the abundant oxygen vacancies in CeMn-0.4 played a pivotal role in sustaining the oxidation process by bolstering the activation of gaseous oxygen and the mobility of lattice oxygen.

RESUMEN

Mechanistic investigations of an environmentally friendly and easy-to-implement oxidation method in the remediation of contaminated anoxic waters, i.e. groundwater, through the sole use of oxygen for the oxygen-induced oxidation of pollutants were the focus of this work. This was achieved by the addition of O2 under anoxic conditions in the presence of ferrous iron which initiated the ferrous oxidation and the simultaneous formation of reactive •OH radicals. The involvement of inorganic ligands such as carbonates in the activation of oxygen as part of the oxidation of Fe2+ in water was investigated, too. The formation of •OH radicals, was confirmed in two different, indirect approaches by a fluorescence-based method involving coumarin as •OH scavenger and by the determination of the oxidation products of different aromatic VOCs. In the latter case, the oxidation products of several typical aromatic groundwater contaminants such as BTEX (benzene, toluene, ethylbenzene, xylenes), indane and ibuprofen, were determined. The influence of other ligands in the absence of bicarbonate and the effect of pH were also addressed. The possibility of activation of O2 in carbonate-rich water i.e. groundwater, may also potentially contribute to oxidation of groundwater contaminants and support other primary remediation techniques.

Asunto(s)

RESUMEN

Decades of research have illuminated the significant roles of gold/gold oxide clusters in small molecule catalytic oxidation. However, many fundamental questions, such as the actual sites to adsorb and activate O2 and the impact of charge, remain unanswered. Here, we have utilized an improved genetic algorithm program coupled with the DFT method to systematically search for the structures of Au1-5Ox-/+/0 (x = 1-4) and calculated binding interactions between Au1-5Ox-/+/0 (x = 1-2) and O2, aiming to determine the active sites and to elucidate the impact of different charge states in gold oxide systems. The results revealed that the reactivity of all three kinds of small gold oxide clusters toward O2 is strongly site-dependent, with clusters featuring an -O-Au site exhibiting a preference for adsorption. The charges on small gold oxide clusters significantly impact the interaction strength and the activation degree of adsorbed O2: in the case of anionic cluster, the interaction between O2 and the -O-Au sites leads to a chemical reaction involving electron transfer, thereby significantly activating O2; in neutral and cationic clusters, the adsorption of O2 on their -O-Au sites can be viewed as an electrostatic interaction. Pointedly, for cationic clusters, the highly concentrated positive charge on the Au atom of the -O-Au sites can strongly adsorb but hardly activate the adsorbed O2. These results have certain reference points for understanding the gold oxide interfaces and the improved catalytic oxidation performance of gold-based systems in the presence of atomic oxygen species.

RESUMEN

The Fenton-like activated molecular oxygen technology demonstrates significant potential in the treatment of refractory organic pollutants in wastewater, offering promising development prospects. We prepared a N-doped C-coated copper-based catalyst Cu0/NC3-600 through the pyrolysis of Mel-modified Cu-based metal-organic framework (MOF). The results indicate that the degradation of 20 mg/L norfloxacin (NOR) was achieved using 1.0 g/L Cu0/NC3-600 across a wide pH range, with a removal rate exceeding 95 % and total organic carbon (TOC) removals approaching 70 % after 60 min at pH 5-11. The nitrogen doping enhances the electronic structure of the carbon material, facilitating the adsorption of molecular oxygen. Additionally, the formed carbon layer effectively prevent copper leaching,contributing to increased stability to a certain extent. Subsequently, we propose the catalytic reaction mechanism for the Cu0/NC/air system. Under acidic conditions, Cu0/NC3-600 activates molecular oxygen to produce the •O2-, which serves as the primary active species for NOR degradation. While in alkaline conditions, the high-valent copper species Cu3+ is generated in conjunction with •O2-, both working simultaneously for NOR degradation. Furthermore, based on the LC-MS results, we deduced four possible degradation pathways. This work offers a novel perspective on expanding the pH range of copper-based catalysts with excellent ability to activate molecular oxygen for environmental water treatment.

RESUMEN

Photo-Fenton-like technology based on H2O2 is considered as an ideal strategy to generate reactive oxygen species (ROS) for antibiotic degradation, but O2 overflow in the process severely limits the utilization efficiency of H2O2. Herein, we fabricate Bi2MoO6 (BMO) photocatalyst modified with Frustrated Lewis pairs (FLPs) as a Fenton catalyst model for enhancing reuse of spilled O2. The FLPs created by the introduction of cerium and oxygen vacancy were found to contribute to regulate the electronic structure of BMO and further improve the acidic and basic properties of photocatalyst surface. More importantly, the frustrated acid and base sites can enhance the H2O2 and O2 interfacial adsorption process and provide an Ce4+-Ov-O2- active site on the surface of Ce-BMO nanosheets, which can promote O2/•O2-/1O2/H2O2 redox cycles to achieve high H2O2 utilization efficiency. Specifically, in the experiment using tetracycline as a photocatalytic degradation object, the degradation activity of Ce-BMO was 2.15 times higher than that of BMO pure phase. Quenching experiments and EPR assays also confirmed that 1O2 and •O2- were the dominant oxidative species. This study systematically reveals the design of Fenton photocatalytic active sites at the atomic scale and provides new insights into constructing FLPs photocatalysts with high H2O2 utilization efficiency.

Asunto(s)