RESUMEN

Quantitative molecular structure-reactivity models are useful for generating predictions to guide synthesis design, and in formulating and testing mechanistic hypotheses. We report an expanded multivariate linear regression (MLR) model for the rate of (hetero)aryl (pseudo)halide oxidative addition to L2Pd(0), here exemplified by Pd(PCy3)2. This builds on a prior model from our group, with additional substrate classes (aryl chlorides and iodides) and reaction solvents (THF, toluene, THF/DMF mixture). Overall solvent effects across the entire substrate set are minimal under these conditions, enabling a unified MLR model without introduction of new molecular descriptors beyond the original five. Examining the mechanistic origin of the two molecular electrostatic potential (ESP) descriptors led to generation of a simpler, four descriptor model that is suitable for aryl halides, but not for 2-halopyridines. Using this model we identified a mechanistic outlier, 2-pyridyl triflate, which undergoes a nucleophilic displacement oxidative addition that does not involve the adjacent nitrogen atom. Finally, we discuss the relationship between C-X bond strength and oxidative addition rates, and compare the intrinsic bond strength index (IBSI) to bond dissociation enthalpy (BDE) as a bond strength descriptor.

RESUMEN

We report a study of solvent effects on the rate, selectivity, and mechanism of (hetero)aryl (pseudo)halide oxidative addition to Pd(PCy3)2 as an exemplar of L2Pd(0) species. First, 2-chloro-3-aminopyridine is observed to undergo faster oxidative addition in toluene compared to more polar solvents, which is not consistent with the trend we observe with many other 2-halopyridines. We attribute this to solvent basicity hydrogen-bonding (pKHB) between solvent and substrate. Greater hydrogen-bond donation from the substrate leads to a more electron-rich aromatic system, and therefore slower oxidative addition. We demonstrate how this affects rate and site-selectivity for hydrogen-bond donating substrates. Second, electron-deficient multihalogenated pyridines exhibit improved site-selectivity in polar solvents, which we attribute to different C-X sites undergoing oxidative addition by two different mechanisms. The C-X site that favours the more polar nucleophilic displacement transition state is preferred over the site that favours a less-polar 3-centered transition state. Finally, (hetero)aryl triflates consistently undergo faster oxidative addition in more polar solvents, which we attribute to highly polar nucleophilic displacement transition states. This leads to improved site-selectivity for C-OTf oxidative addition, even in the presence of highly reactive 2-pyridylhalides.

RESUMEN

Aryl fluorosulfates of varying complexities have been used in amination reactions in water using a new Pd oxidative addition complex (OAC-1) developed specifically to match the needs of the fine chemicals industry, not only in terms of functional group tolerance, but also reflecting time considerations associated with these important C-N couplings. Also especially noteworthy is that they replace both PFAS-related triflates and nonaflates, which are today out of favor due to recent government regulations. The new complex based on the BippyPhos ligand is used at low loadings and under aqueous micellar conditions. Moreover, it is easily prepared and stable to long term storage. DFT calculations on the OAC precatalyst compare well with the X-ray structure of the crystals with π-complexation to the aromatic system of the ligand and also confirm the NMR data showing a mixture of conformers in solution that differ from the X-ray structure in rotation of the phenyl and t-butyl ligand substituents. An extensive variety of coupling partners, including pharmaceutically relevant APIs, readily participate under mild and environmentally responsible reaction conditions.

RESUMEN

We present the photoreaction of newly prepared bis(6,6'-dimethyl-2,2'-bipyridine)(oxalato)rhodium(III) ([Rh(N^N)2(ox)]+) in CD3OD. Photoirradiation of this complex causes the dissociation of ox, followed by the formation of the unprecedented Rh(III) complex with Rh-H and Rh-C s bonds, [Rh(N^N)(C^N)(H)(CD3OD)]+ (C^N = [6,6'-dimethyl-2,2'-bipyridine]-3-yl-κC3,κN1'). This hydride formation and cyclometallation spontaneously proceed owing to the conflict between the steric hindrance arising from the methyl groups of N^N and the driving force for the structural change due to [Rh(N^N)2]+ formation. Although [Rh(N^N)(C^N)(H)(CD3OD)]+ is initially converted to [Rh(N^N)2]+ by photoirradiation, it is immediately regenerated by the rollover cyclometallation of the [Rh(N^N)2]+ complex. [Rh(N^N)(C^N)(H)(CD3OD)]+ undergoes H/D exchange for the H atoms in the Rh-H bond and at the 3, 3'-positions of the N^N ligand during the photoirradiation. DFT calculations predict with reasonable certainty the spontaneous structural change of [Rh(N^N)2]+ to [Rh(N^N)(C^N)(H)(CD3OD)]+ and the subsequent photodriven Rh-C bond rupture leading to the formation of [Rh(N^N)2]+ accompanied by H/D exchange reactions.

RESUMEN

We describe a detailed investigation into why bulky ligands-those that enable catalysis at "12e -" Pd0-tend to promote overfunctionalization during Pd-catalyzed cross-couplings of dihalogenated substrates. After one cross-coupling event takes place, PdL initially remains coordinated to the π system of the nascent product. Selectivity for mono- vs. difunctionalization arises from the relative rates of π-decomplexation versus a second oxidative addition. Under the Suzuki coupling conditions in this work, direct dissociation of 12e - PdL from the π-complex cannot outcompete oxidative addition. Instead, Pd must be displaced from the π-complex as 14e - PdL(L') by a second incoming ligand L'. The incoming ligand is another molecule of dichloroarene if the reaction conditions do not include π-coordinating solvents or additives. More overfunctionalization tends to result when increased ligand or substrate sterics raises the energy of the bimolecular transition state for separating 14e - PdL(L') from the mono-cross-coupled product. This work has practical implications for optimizing selectivity in cross-couplings involving multiple halogens. For example, we demonstrate that small coordinating additives like DMSO can largely suppress overfunctionalization and that precatalyst structure can also impact selectivity.

RESUMEN

Two-electron oxidative addition is one of the most important elementary reactions for d-block transition metals but it is uncommon for f-block elements. Here, we report the first examples of intermolecular oxidative addition of E-H (E=C, N) bonds to uranium(II) centers. The transient U(II) species was formed in-situ by reducing a heterometallic cluster featuring U(IV)-Pd(0) bonds with potassium-graphite (KC8). Oxidative addition of C-H or N-H bonds to the U(II) centers was observed when this transient U(II) species was treated with benzene, carbazole or 1-adamantylamine, respectively. The U(II) centers could also react with tetracene, biphenylene or N2O, leading to the formation of arene reduced U(IV) products and uranyl(VI) species via two- or four-electron processes. This study demonstrates that the intermolecular two-electron oxidative addition reactions are viable for actinide elements.

RESUMEN

Previous mass spectrometric (MS) studies demonstrated that singly charged hydration clusters of manganese ions [Mn(H2O)n]+ were, on one hand, highly reactive toward intracluster water insertion but, on the other hand, inert toward nitrous oxide activation. This contrast in reactivity has been rationalized by our present theoretical investigation for the interconversion between the pristine Mn(I) monovalent form as a monatomic ion in [MnI(H2O)n]+ and the oxidized Mn(III) trivalent form as a hydride-hydroxide in [HMnIIIOH(H2O)n-1], as well as their reactivity toward nitrous oxide activation. Our theoretical interpretations are supported with quantum chemical calculations based on density functional theory (DFT), performed systematically for the cluster-size range of n = 1 - 12. Our DFT results show that water insertion is kinetically and thermodynamically favorable for n ≥ 8, suggesting [HMnIIIOH(H2O)n-1]+ is the predominant form, as observed in previous MS experiments. While [MnI(H2O)n]+ is capable of N2O reduction, the process of which is highly exothermic, similar reactions are unfavorable with [HMnIIIOH(H2O)n-1]+, which can only form weakly bound adducts with N2O. This work demonstrates the masking effect of water molecules over the high reactivity of the hydrated Mn(I) center and sheds light on the potential roles of water in transition metal systems.

RESUMEN

The factors governing the acceleration of the oxidative addition of methyl iodide to pincer rhodium(I)-complexes induced by coronene have been computationally explored in detail using quantum chemical methods. Both the parent reaction and the coronene-mediated process proceed via a stepwise SN2-type mechanism. It is found that the acceleration of the process derives from the formation of an initial supramolecular complex, mainly stabilized by electrostatic and π-π interactions, which significantly increases the electron richness of the complex. The impact of this effect on the reaction barrier has been quantitatively analyzed by applying the activation strain model in combination with the energy decomposition analysis method. In addition, the influence of other polycyclic aromatic hydrocarbons on the oxidative reaction has been also considered.

RESUMEN

Low-valent silicon compounds such as neutral silylenes display versatile reactivity for the activation of small molecules. In contrast, their anionic congeners silanides ([R3 Si- ]) have primarily been investigated for their nucleophilic reactivity. Here we show that incorporating a silanide center in a bicyclic cage structure allows for formal oxidative addition of polar element-hydrogen bonds (RX-H, R=aromatic residue, X=O, S, NH). The resulting hydrosilicates were isolated and characterized structurally and spectroscopically. Density Functional Theory (DFT) calculations and experimental observations support an ionic mechanism for RX-H bond activation. Finally, the reactivity of the RS-H bond adduct was further investigated, revealing that it behaves as a Lewis pair upon facile heterolytic cleavage of the Si-S bond.

RESUMEN

Commercial zinc metal powder requires activation for consistent and reliable use as a reductant in the formation of organozinc reagents from organohalides, and for the avoidance of supplier and batch-to-batch variability. However, the impact of activation methods on the reaction environments of subsequent intermediates has been unknown. Herein, a fluorescence lifetime imaging microscopy (FLIM) method is developed to bridge this knowledge gap, by imaging and examining reaction intermediates on zinc metal that has been activated by pretreatment through different common methods (i. e., by chemical activation with TMSCl, dibromoethane, or HCl; or by mechanical activation). The group of chemical activating agents, previously thought to act similarly by removing oxide layers, are here shown to produce markedly different reaction environments experienced by subsequent oxidative-addition intermediates from organohalides - data uniquely available through FLIM's ability to detect small quantities of intermediates in situ coupled with its microenvironmental sensitivity. These different microenvironments potentially give rise to different rates of formation, subsequent solubilization, and reactivity, despite the shared "[RZnX]" molecular structure of these intermediates. This information revises models for methods development for oxidative addition to currently sluggish metals beyond zinc by establishing diverse outcomes for pretreatment activation methods that were previously considered similar.

RESUMEN

In this paper, we theoretically investigated spectral physics on Cu(III) complexes formed by the oxidative addition of α-haloacetonitrile to ionic and neutral Cu(I) complexes, stimulated by recent experimental reports. Firstly, the electronic structures of reactants of α-haloacetonitrile and neutral Cu(I) and two kinds of products of Cu(III) complexes are visualized with the density of state (DOS) and orbital energy levels of HOMO and LUMO. The visually manifested static and dynamic polarizability as well as the first hyperpolarizability are employed to reveal the vibrational modes of the normal and resonance Raman spectra of two Cu(III) complexes. The nuclear magnetic resonance (NMR) spectra are not only used to identify the reactants and products but also to distinguish between two Cu(III) complexes. The charge difference density (CDD) reveals intramolecular charge transfer in electronic transitions in optical absorption spectra. The CDDs in fluorescence visually reveal electron-hole recombination. Our results promote a deeper understanding of the physical mechanism of stable Cu(III) produced by the oxidative addition of an alkyl halide.

Asunto(s)

RESUMEN

The reactions of alkenes with phenyl-N-triflylimino-λ3-iodane PhI=NTf (1) have been studied in different conditions. In methylene chloride, in the presence of N-halosuccinimides, the products of mono and bis-triflamidation were obtained. In MeCN, the product of bromotriflamidation (with NBS) with solvent interception or of bis-triflamidation (with NIS) is formed. The reaction with trans-stilbene in acetonitrile with NBS gave rise to cyclization to 2-methyl-4,5-diphenyl-1-triflyl-4,5-dihydro-1H-imidazole. In contrast, with NIS as an oxidant, both in CH2Cl2 and MeCN, the major product was 2,3-diphenyl-1-triflylaziridine formed in good yield. With NBS, aziridine is also formed but as a minor product, the major one being a mixture of diastereomers of the product of bromotriflamidation. The reaction of compound 1 with vinylcyclohexane in methylene chloride affords the mixtures of regioisomers of the products of halotriflamidation, whereas in acetonitrile, the products of solvent interception and cyclization to the imidazoline are formed. A mechanism explaining the formation of all isolated products is proposed.

Asunto(s)

RESUMEN

Treatment of [Co2(CO)8] with the ipso-substituted P(C-X)PY ligands (X = Br, Cl; R = iPr, tBu) bearing Y = NH and CH2 linkers under solvothermal conditions affords the five-coordinate Co(I) and Co(III) complexes [CoI(PCPY-R)(CO)2] and [CoIII(PCPY-R)X2]. The later are paramagnetic exhibiting a solution magnetic moment in the range of 3.0-3.3 µB which is consistent with a d6 intermediate spin system corresponding to two unpaired electrons. In the case of P(C-X)PY ligands (X = Br, Cl; R = tBu; Y = NH) the formation of the square planar Co(II) complex [Co(PCPNH-tBu)X] was favored. This complex gives rise to a magnetic moment of 1.8 µB being consistent with a d7 low spin system corresponding to one unpaired electron. All complexes are characterized by means of spectroscopic techniques (NMR, IR), HR-MS. Representative complexes were also characterized by X-ray crystallography. Supplementary Information: The online version contains supplementary material available at 10.1007/s00706-023-03123-x.

RESUMEN

Trimethylsilyl chloride (TMSCl) is commonly used to "activate" metal(0) powders toward oxidative addition of organohalides, but knowledge of its mechanism remains limited by the inability to characterize chemical intermediates under reaction conditions. Here, fluorescence lifetime imaging microscopy (FLIM) overcomes these prior limitations and shows that TMSCl aids in solubilization of the organozinc intermediate from zinc(0) metal after oxidative addition, a previously unknown mechanistic role. This mechanistic role is in contrast to previously known roles for TMSCl before the oxidative addition step. To achieve this understanding, FLIM, a tool traditionally used in biology, is developed to characterize intermediates during a chemical reaction-thus revealing mechanistic steps that are unobservable without fluorescence lifetime data. These findings impact organometallic reagent synthesis and catalysis by providing a previously uncharacterized mechanistic role for a widely used activating agent, an understanding of which is suitable for revising activation models and for developing strategies to activate currently unreactive metals.

RESUMEN

This report describes the synthesis of a pseudo-tetrahedral chromium alkyne complex supported by a bidentate phosphinimide ligand and its reactivity with an azobenzene derivative. Characterization of the former by structural and computational methods reveals an unprecedented extent of alkyne activation by a formal chromium(II) center, suggesting that this complex is best described as a chromium(IV)-metallocyclopropene. Exposure of this compound to 4,4'-difluoroazobenzene results in the formation of a chromium(VI) diimido complex, which constitutes a rare 4-electron oxidative addition of an N=N double bond. The isolation of a chromium(IV)-hydrazido intermediate enabled mechanistic investigations of this challenging bond cleavage process. This work substantiates the notion that terminal phosphinimide ligands can engender first-row transition metal ions with exceptional reactivity.

RESUMEN

The reaction of bisdicyclohexylphosphinoethane (dcpe) and the subvalent MI sources [MI (PhF)2 ][pf] (M=Ga+ , In+ ; [pf]- =[Al(ORF )4 ]- ; RF =C(CF3 )3 ) yielded the salts [{M(dcpe)}2 ][pf]2 , containing the first dicationic, trans-bent digallene and diindene structures reported so far. The non-classical MI ⇆MI double bonds are surprisingly short and display a ditetrylene-like structure. The bonding situation was extensively analyzed by quantum chemical calculations, QTAIM (Quantum Theory of Atoms in Molecules) and EDA-NOCV (Energy Decomposition Analysis with the combination of Natural Orbitals for Chemical Valence) analyses and is compared to that in the isoelectronic and isostructural, but neutral digermenes and distannenes. The dissolved [{Ga(dcpe)}2 ]2+ ([pf]- )2 readily reacts with 1-hexene, cyclooctyne, diphenyldisulfide, diphenylphosphine and under mild conditions at room temperature. This reactivity is analyzed and rationalized.

RESUMEN

The dinickel(I) complex Ni2 (tBu PONNOPONNO), featuring a planar macrocyclic diphosphoranide ligand tBu PONNOPONNO, offers a unique architectural platform for observing bimetallic elementary reactions. Oxidative addition reactions of alkyl halides produce dinickel(II) complexes of the type Ni2 (µ-R)(µ-X)(tBu PONNOPONNO). However, when R=Et ß-hydride elimination is observed to form a dinickel monohydride, with the rate dependent on the nature of X. DFT studies suggest a new mechanism for bimetallic ß-hydride elimination, where the rate dependence arises from the steric pressure imposed by the X group on the opposing trans face of the dinickel macrocycle. This work enhances understanding of bimetallic elementary reactions, particularly ß-hydride elimination, which have not been well-explored for dinuclear systems.

RESUMEN

Three distinct routes are reported to the soluble, dihydridoaluminate compounds, AM[Al(NONDipp )(H)2 ] (AM=Li, Na, K, Rb, Cs; [NONDipp ]2- =[O(SiMe2 NDipp)2 ]2- ; Dipp=2,6-iPr2 C6 H3 ) starting from the alkali metal aluminyls, AM[Al(NONDipp )]. Direct H2 hydrogenation of the heavier analogues (AM=Rb, Cs) produced the first examples of structurally characterized rubidium and caesium dihydridoaluminates, although harsh conditions were required for complete conversion. Using 1,4-cyclohexadiene (1,4-CHD) as an alternative hydrogen source in transfer hydrogenation reactions provided a lower energy pathway to the full series of products for AM=Li-Cs. A further moderation in conditions was noted for the thermal decomposition of the (silyl)(hydrido)aluminates, AM[Al(NONDipp )(H)(SiH2 Ph)]. Probing the reaction of Cs[Al(NONDipp )] with 1,4-CHD provided access to a novel inverse sandwich complex, [{Cs(Et2 O)}2 {Al(NONDipp )(H)}2 (C6 H6 )], containing the 1,4-dialuminated [C6 H6 ]2- dianion and representing the first time that an intermediate in the commonly utilized oxidation process of 1,4-CHD to benzene has been trapped. The synthetic utility of the newly installed Al-H bonds has been demonstrated by their ability to reduce CO2 under mild conditions to form the bis-formate AM[Al(NONDipp )(O2 CH)2 ] compounds, which exhibit a diverse series of eyecatching bimetallacyclic structures.

RESUMEN

Platinum complexes are ubiquitous in chemistry and largely used as catalysts or as precursors in drug chemistry, thus a deep knowledge of their electronic properties may help in planning new synthetic strategies or exploring new potential applications. Herein, the electronic structure of many octahedral platinum complexes is drastically revised especially when they feature electronegative elements such as halogens and chalcogens. The investigation revealed that in most cases the five d platinum orbitals are invariably full, thus the empty antibonding orbitals, usually localized on the metal, are mainly centered on the ligands, suggesting a questionable assignment of formal oxidation state IV. The analysis supports the occurrence of the inverted ligand field theory in all cases with the only exceptions of the Pt-F and Pt-O bonding. The trends for the molecular complexes are mirrored also by the density of states plots of extended structures featuring octahedral platinum moieties in association with chalcogens atoms. Finally, the oxidative addition of a Se-Cl linkage to a square platinum complex to achieve an octahedral moiety has been revised in the framework of the inverted ligand field.

RESUMEN

1 H NMR studies using a cationic complex with a pyridine-di-imidazolylidene pincer ligand of formula [Rh(CNC)(CO)]+ revealed that this compound showed high binding affinity with coronene in CH2 Cl2 . The interaction between coronene and the planar RhI complex is established by means of π-stacking interactions. This interaction has a strong impact on the electron-donating strength of the pincer CNC ligand, which is increased significantly, as demonstrated by the shifting of the ν(CO) stretching bands to lower frequencies. The addition of coronene increases the reaction rate of the nucleophilic attack of methyl iodide on the rhodium (I) pincer complex, and also has a positive effect on the performance of the complex as a catalyst in the cycloisomerization of 4-pentynoic acid. These findings highlight the importance of supramolecular interactions for tuning the reactivity and catalytic activity of square-planar metal complexes.