RESUMEN

This study assessed the methane production from food waste (FW) with dominant components of Meat (MFW), Fruit &Veg (VFW), Grain (GFW), Dairy (DFW), and the mixed feed of these components (MixFW). The high protein and lipid content FW (HPLFW) of MFW, DFW, and MixFW showed the methane yields of 337.0 ± 3.0, 307.4 ± 0.8, and 297.1 ± 1.2 ml-CH4/gCOD, respectively, while those for the high carbohydrate content FW (HCFW) of VFW and GFW were 238.3 ± 1.2 and 171.2 ± 0.3 ml-CH4/gCOD, respectively. A modified two-component kinetic (MTK) model was demonstrated to be the best to describe the methane production kinetics of both HPLFW and HCFW types of feeds. The element balance analysis revealed the element formula of the FW feeds and the methane-conversion organic content. The results obtained from this study showed that the high lipid and animal protein content increased the methane yield and biogas methane composition.

RESUMEN

Conductive nanofiltration (CNF) membranes hold great promise for removing small organic pollutants from water through enhanced Donnan exclusion and electrocatalytic degradation. However, current CNF membranes face limitations in conductivity, structural stability, and nanochannel control strategies. This work addresses these challenges by introducing aniline-functionalized carbon nanotubes (NH2-CNTs) as an interlayer. NH2-CNTs enhance the dispersibility and adhesion of pristine carbon nanotubes, leading to a more conductive and stable composite nanofiltration membrane. The redesigned NH2-CNTs interlayered conductive nanofiltration (NICNF) membrane exhibits a 10-fold increase in conductivity and a high response degree (80%) with excellent cyclic stability, surpassing existing CNF membranes. The synergistic effects of enhanced Donnan exclusion, voltage switching, and electrocatalysis enable the NICNF membrane to achieve selective recovery of mixed dyes, 98.97% removal of residual wastewater toxicity, and a 5.2-fold increase in permeance compared to the commercial NF270 membrane. This research paves the way for next-generation multifunctional membranes capable of the efficient recovery and degradation of toxic organic pollutants in wastewater.

Asunto(s)

RESUMEN

Though surface water quality has been monitored in southern Peru over the past and current century, it has been implemented by multiple organizations. The data lacks a centralized repository and access requires logistical and temporal hurdles associated with official requests. A substantial portion of the data has not been quality assured and is in difficult-to-access formats such as scanned PDF documents. These obstacles collectively make it challenging to maximize the impact of these monitoring efforts such as efficiently evaluating long-term water quality trends. To address this opportunity, we gathered available surface water quality information from five watersheds in the Arequipa Region of southern Peru: Camaná, Chili, Ocoña, Tambo, and Yauca. The effort required entry of more than 130,000 records of water quality properties across 274 monitoring stations with data including the concentration of select nutrients, metals, organic compounds, and biological taxa. The water quality records in the Chili watershed go back as far as 1905, while data for the other watersheds was largely confined to the years 2012-2021. This document describes how the surface water quality information was assimilated with quality control and provides a centralized Excel database so that the data can be efficiently used for research and decision making purposes.

RESUMEN

The rapid increase of anthropogenic activity at shipping ports and surrounding coastal areas has been correlated with higher chemical contamination entering the surrounding marine environment. Chemical contaminants in marine environments can lead to significant health problems for green turtles (Chelonia mydas), especially when these contaminants accumulate in their foraging grounds. This study examined the exposure and toxicological effects of chemical contaminants on green turtle cells using a species-specific cell viability assay. Using the QuEChERs extraction, organic contaminants were extracted from 60 blood samples collected from green turtles in three foraging locations: Port Curtis, and two reefs (Heron Reef and Hoskyn-Fairfax Reefs) within the Capricorn Bunker Group of the outer Great Barrier Reef. Blood extracts were tested for cytotoxicity against primary green turtle fibroblast cells using an in vitro resazurin bioassay to assess cell viability. Extracts from Gladstone and Heron Reef indicated significant chemical contamination, at levels high enough to cause adverse health effects of green turtles. Very low toxicity values at the Hoskyn-Fairfax Reefs location indicate its potential to be established as a reference site for the southern Great Barrier Reef.

Asunto(s)

RESUMEN

This study aimed to investigate whether separating organics depletion from nitrification increases the overall performance of urine nitrification. Separate organics depletion was facilitated with membrane aerated biofilm reactors (MABRs). The high pH and ammonia concentration in stored urine inhibited nitrification in the first stage and therewith allowed the separation of organics depletion from nitrification. An organics removal of 70 % was achieved at organic loading rates in the influent of 3.7 gCOD d-1 m-2. Organics depletion in a continuous flow stirred tank reactor (CSTR) for organics depletion led to ammonia stripping through diffused aeration of up to 13 %. Using an MABR, diffusion into the lumen amounted for 4 % ammonia loss only. In the MABR, headspace volume and therefore ammonia loss through the headspace was negligible. By aerating the downstream MABR for nitrification with the off-gas of the MABR for organics depletion, 96 % of the ammonia stripped in the first stage could be recovered in the second stage, so that the overall ammonia loss was negligibly low. Nitrification of the organics-depleted urine was studied in MABRs, CSTRs, and sequencing batch reactors in fed batch mode (FBRs), the latter two operated with suspended biomass. The experiments demonstrated that upstream organics depletion can double the nitrification rate. In a laboratory-scale MABR, nitrification rates were recorded of up to 830 mgNL-1 d-1 (3.1 gN m-2 d-1) with ambient air and over 1500 mgNL-1 d-1 (6.7 gN m-2 d-1) with oxygen-enriched air. Experiments with a laboratory-scale MABR showed that increasing operational parameters such as pH, recirculation flow, scouring frequency, and oxygen content increased the nitrification rate. The nitrification in the MABR was robust even at high pH setpoints of 6.9 and was robust against process failures arising from operational mistakes. The hydraulic retention time (HRT) required for nitrification was only 1 to 2 days. With the preceding organics depletion, the HRT for our system requires 2 to 3 days in total, whereas a combined activated sludge system requires 4 to 8 days. The N2O concentration in the off-gas increases with increasing nitrification rates; however, the N2O emission factor was 2.8 % on average and independent of nitrification rates. These results indicate that the MABR technology has a high potential for efficient and robust production of ammonium nitrate from source-separated urine.

Asunto(s)

RESUMEN

Cathodic electroactive bacteria (C-EAB) which are capable of accepting electrons from solid electrodes provide fresh avenues for pollutant removal, biosensor design, and electrosynthesis. This review systematically summarized the burgeoning applications of the C-EAB over the past decade, including 1) removal of nitrate, aromatic derivatives, and metal ions; 2) biosensing based on biocathode; 3) electrosynthesis of CH4, H2, organic carbon, NH3, and protein. In addition, the mechanisms of electron transfer by the C-EAB are also classified and summarized. Extracellular electron transfer and interspecies electron transfer have been introduced, and the electron transport mechanism of typical C-EAB, such as Shewanella oneidensis MR-1, has been combed in detail. By bringing to light this cutting-edge area of the C-EAB, this review aims to stimulate more interest and research on not only exploring great potential applications of these electron-accepting bacteria, but also developing steady and scalable processes harnessing biocathodes.

Asunto(s)

RESUMEN

Industrial wastewater should be treated with caution due to its potential environmental risks. In this study, a polymerization-based cathode/Fe3+/peroxydisulfate (PDS) process was employed for the first time to treat a raw coking wastewater, which can achieve simultaneous organics abatement and recovery by converting organic contaminants into separable solid organic-polymers. The results confirm that several dominant organic contaminants in coking wastewater such as phenol, cresols, quinoline and indole can be induced to polymerize by self-coupling or cross-coupling. The total chemical oxygen demand (COD) abatement from coking wastewater is 46.8% and the separable organic-polymer formed from organic contaminants accounts for 62.8% of the abated COD. Dissolved organic carbon (DOC) abatement of 41.9% is achieved with about 89% less PDS consumption than conventional degradation-based process. Operating conditions such as PDS concentration, Fe3+ concentration and current density can affect the COD/DOC abatement and organic-polymer yield by regulating the generation of reactive radicals. ESI-MS result shows that some organic-polymers are substituted by inorganic ions such as Cl-, Br-, I-, NH4+, SCN- and CN-, suggesting that these inorganic ions may be involved in the polymerization. The specific consumption of this coking wastewater treatment is 27 kWh/kg COD and 95 kWh/kg DOC. The values are much lower than those of the degradation-based processes in treating the same coking wastewater, and also are lower than those of most processes previously reported for coking wastewater treatment.

Asunto(s)

RESUMEN

The study of Na-carbonates stability and their transformations in aqueous carbonate fluid under high P-T conditions is relevant from the point of view of the understanding geochemical processes of the Na-assisted carbon circulation in the Earth's crust and subduction zones. In situ Raman study of Na-bearing carbonate-water-Fe-metal system in diamond anvil cell (DAC) at high P-T conditions revealed that carbonates decompose with abiogenic formation of formates and other organic compounds that differs from behavior of carbonates in dry system. XRD and FTIR methods have been used additionally to determine the phase composition. Na-bearing carbonates (nahcolite NaHCO3, shortite Na2Ca2(CO3)3 and cancrinite Na7Ca[(CO3)1.5Al6Si6O24]⋅2H2O) in aqueous fluid decompose to form simple carbonates and formates (as dominant organic molecules) at moderate P-T parameters (above ∼0.2 GPa, 200 °C). Our experimental results directly confirm the hypothesis of Horita and Berndt (Science, 1999) about possible yield of organic formates in the carbonate-water-metal system. Nahcolite NaHCO3 in aqueous fluid in the presence of Fe metal decomposes into anhydrous phases: natrite γ-Na2CO3, siderite, magnetite (due to dissolution of Fe steel gasket), Na-formate and likely organic molecular crystalline solvate of Na-formate and methyl formate. Shortite decays into anhydrous phases: aragonite CaCO3, Na-Ca-formates and an amorphous phase. Cancrinite decomposes to unidentified carbonate-alumonosilicate phases, Na-Ca-formates and unknown organic molecular crystal. Magnetite is also formed in this system due to dissolution of Fe steel gasket used in DAC. The present study provides a new insight in processes of abiogenic formation of organic matter from carbonates in the crust and upper mantle.

RESUMEN

Nitrate and Cr(VI) are the typical and prevalent co-contaminants in the groundwater, how to synchronously and effectively diminish them has received growing attention. The most problem that currently limits the nitrate and Cr(VI) reduction technology for groundwater remediation is with emphasis on exploring the optimal electron donors. This study investigated the feasibility of utilizing the synergistical effect of inorganic electron donors (pyrite, sulfur) and inherently limited organics to promote synchronous nitrate and Cr(VI) removal, which meets the requirement of naturally low-carbon and eco-friendly technologies. The NO3--N and Cr(VI) removal efficiencies in the pyrite and sulfur involved mixotrophic biofilter (PS-BF: approximately 90.8 ± 0.6% and 99.1 ± 2.1%) were substantially higher than that in a volcanic rock supported biofilter (V-BF: about 49.6% ± 2.8% and 50.0% ± 9.3%), which was consistent with the spatial variations of their concentrations. Abiotic and biotic batch tests directly confirmed the decisive role of pyrite and sulfur for NO3--N and Cr(VI) removal via chemical and microbial pathways. A server decline in sulfate production correlated with decreasing COD consumption revealed that there was sulfur disproportionation induced by limited organics. Metagenomic analysis suggested that chemoautotrophic microbes like Sulfuritalea and Thiobacillus were key players responsible for sulfur oxidation, nitrate and Cr(VI) reduction. The metabolic pathway analysis suggested that genes encoding functional enzymes related to complete denitrification, S oxidation, and dissimilatory sulfate reduction were upregulated, however, genes encoding Cr(VI) reduction enzymes (e.g. chrA, chrR, nemA, and azoR) were downregulated in PS-BF, which further explained the synergistical effect of multiple electron donors. These findings provide insights into their potential cooperative interaction of multiple electron donors on greatly promoting nitrate and Cr(VI) removal and have implications for the remediation technology of nitrate and Cr(VI) co-contaminated groundwater.

Asunto(s)

RESUMEN

With cyclohexane (CH), benzene (BE), and ethyl acetate (EA) as solvents, Naomaohu lignite (NL, a typical oil-rich, low-rank coal) from Hami, Xinjiang, was thermally dissolved (TD) to obtain three types of soluble organics (NLCH, NLBE, and NLEA) and the corresponding insoluble portions (NLCH-R, NLBE-R, and NLEA-R). Ultimate analysis, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TG-DTG), and gas chromatography-mass spectrometry (GC/MS) were used to characterize NL and its soluble and insoluble portions. Results showed that, compared with NL, the C element in NLCH-R, NLBE-R, and NLEA-R increased, while the O element decreased significantly, indicating that thermal dissolution is a carbon enrichment process and an effective deoxidation method. The GC/MS results showed that oxygen-containing organic compounds (OCOCs) are dominant in NLCH, NLBE, and NLEA. NLCH is mainly composed of ketones (11.90%) and esters (19.04%), while NLBE and NLEA are composed of alcohols (12.18% and 2.42%, respectively) and esters (66.09% and 84.08%, respectively), with alkyl and aromatic acid esters as the main components. Among them, EA exhibits significant selective destruction for oxygen-containing functional groups in NL. XPS, FTIR, and TG-DTG results showed that thermal dissolution can not only affect the macromolecular network structure of NL, but also improve its pyrolysis reactivity. In short, thermal dissolution can effectively obtain oxygen-containing organic compounds from NL.

RESUMEN

The occurrence and characteristics of plastic debris in aquatic and terrestrial environments have been extensively studied. However, limited information exists on the properties and dynamic behavior of plastic-associated biofilms in the environment. In this study, we collected plastic samples from an inland river system in Mongolia and extracted biofilms to uncover their characteristics using spectroscopic, isotopic, and thermogravimetric techniques. Mixtures of organic and mineral particles were detected in the extracted biofilms, revealing plastic as a carrier for exogenous substances, including contaminants, in the river ecosystem. Thermogravimetric analysis (TGA) indicated the predominant contribution of minerals primarily comprising aluminosilicate and calcite, representing approximately 80 wt% of the biofilms. Differential thermal analysis (DTA) coupled with Fourier transform infrared (FTIR) spectrometry operated at 25°C-600 °C enabled the detection of gaseous decomposition products, such as CO2, H2O, CO, and functional groups (O-H, C-H, C-O, CO, CC, and C-C), released from biopolymers in the extracted biofilms. Dehydration, dehydroxylation, and decarboxylation reactions explain the thermal properties of biofilms. The stable carbon (δ13C) and nitrogen (δ15N) isotope ratios of the biofilms demonstrated variable signatures ranging from -24.1‰ to -27.0‰ and 3.1‰-12.3‰, respectively. A significant difference in the δ13C value (p < 0.05) among the upstream, middle, and downstream research sites could be characterized by available organic carbon sources in the river environment, depending on the research sites. This study provides insights into the characteristics and environmental behavior of biofilms which are useful to elucidate the impact of plastic-associated biofilms on organic matter and material cycling in aquatic ecosystems.

Asunto(s)

RESUMEN

Graphene oxide (GO) is widely employed due to its outstanding properties, leading to an increasing release into the environment and natural waters. Although some studies have reported on the photo-transformation of GO, its behavior in complex natural waters remains inadequately explored. This study demonstrates that different types of ions may promote the photoreduction of GO in the order of Ca2+ > K+ > NO3- > Na+ by interacting with the functional groups on the surface of GO, and the photoreduction is enhanced with increasing ion concentrations. Additionally, natural organic matter (NOM) can inhibit the photoreduction of GO by scavenging reactive oxygen species. However, with increasing NOM concentrations (≥ 5 mgC/L), more NOM adsorb onto the surface of GO through hydrogen bonding, Lewis acid-base interactions, and π-π interactions, thereby enhancing the photoreduction of GO. On this basis, our results further indicate that the combined effects of different ions, such as Ca2+, Mg2+, NOM, and other complex hydrochemical conditions in different natural waters can promote the photoreduction of GO, resulting in a reduction in oxygen functional groups and the formation of defects. This study provides a theoretical basis for assessing the long-term transformation and fate of GO in natural waters.

RESUMEN

This work reports a carbon nitride with pyridinic nitrogen-vacancy (N2CV-CN), which purifies organic contaminants via an in-situ photo-self Fenton-like reaction. Experiments and calculations demonstrated that the nitrogen-vacancy induces lone-paired (LP) and symmetry-unpaired electrons, promoting the formation of low-energy LP-π hybridized orbitals and helping to overcome the pairing energy required for oxygen to accept electrons. Furthermore, the nitrogen-vacancy accelerates film and intra-particle diffusion rates of organic contaminants on N2CV-CN, creating beneficial conditions for reactive oxide species to mineralize organic contaminants. Under sunlight and atmospheric oxygen, a photo-self Fenton-like reaction involving proton-coupled electron transfer occurred on the surface of N2CV-CN. Furthermore, by integrating photocatalysis with flocculation, about 99.1 % suspended substance, 45.5 % chemical oxygen demand, and 38.4 % biological oxygen demand were reduced from polluted river-water. Constructing N2CV-CN and understanding its crucial role offer theoretical and methodological insights into the in-situ purification of contaminated water bodies.

RESUMEN

Brown carbon (BrC) is a class of light-absorbing organic aerosols (OA) and has significant influence on atmospheric radiative forcing. However, the current limited understanding of the physicochemical properties of BrC restricts the accurate evaluation of its environmental effects. Here the optical characteristics and chemical composition of BrC during wintertime in the Yangtze River Delta (YRD) region, China were measured by using high-resolution aerosol mass spectrometry (HR-AMS) and UV-vis spectrometry. Our results showed that BrC in PM2.5 during the campaign was dominated by water-soluble organics, which consist of less oxidized oxygenated OA (LO-OOA), more oxidized oxygenated OA (MO-OOA), fossil fuel OA (FFOA) and biomass burning OA (BBOA). MO-OOA and BBOA were the strongest light absorbing BrC at 365 nm (Abs365), followed by LO-OOA and FFOA with a mass absorption coefficient (MAC) being 0.74 ± 0.04, 0.73 ± 0.03, 0.48 ± 0.04 and 0.39 ± 0.06 m2 g-1 during the campaign, respectively. In the low relative humidity (RH < 80 %) haze periods Abs365 of LO-OOA contributed to 44 % of the total light absorption at 365 nm, followed by MO-OOA (31 %), FFOA (21 %) and BBOA (4 %). In contrast, in the high-RH (RH > 80 %) haze periods Abs365 was dominated by MO-OOA, which accounted for 62 % of the total Abs365, followed by LO-OOA (17 %), BBOA (13 %) and FFOA (8 %). Chemical composition analysis further showed that LO-OOA and MO-OOA are produced from gas-phase photooxidation of VOCs and aerosol aqueous reactions, respectively, in which ammonia significantly enhanced the formation and light absorption of BrC in the high RH haze period. On average, >75 % of the total Abs365nm in the YRD region during the haze events was contributed by LO-OOA and MO-OOA, suggesting that atmospheric BrC in China haze periods is predominantly formed by secondary reactions.

RESUMEN

Bentonite-based composites have been widely utilized in the removal of various pollutants due to low cost, environmentally friendly, ease-to-operate, whereas the recent advances concerning the application of bentonite-based composites in environmental remediation were not available. Herein, the modification (i.e., acid/alkaline washing, thermal treatment and hybrids) of bentonite was firstly reviewed; Then the recent advances of adsorption of environmental concomitants (e.g., organic (dyes, microplastics, phenolic and other organics) and inorganic pollutants (heavy metals, radionuclides and other inorganic pollutants)) on various bentonite-based composites were summarized in details. Meanwhile, the effect of environmental factors and interaction mechanism between bentonite-based composites and contaminants were also investigated. Finally, the conclusions and prospective of bentonite-based composites in the environmental remediation were proposed. It is demonstrated that various bentonite-based composites exhibited the high adsorption/degradation capacity towards environmental pollutants under the specific conditions. The interaction mechanism involved the mineralization, physical/chemical adsorption, co-precipitation and complexation. This review highlights the effect of different functionalization of bentonite-based composites on their adsorption capacity and interaction mechanism, which is expected to be helpful to environmental scientists for applying bentonite-based composites into practical environmental remediation.

Asunto(s)

RESUMEN

Visible light is a universal and user-friendly excitation source; however, its use to generate persistent luminescence (PersL) in materials remains a huge challenge. Herein, the concept of intermolecular charge transfer (xCT) is applied in typical host-guest molecular systems, which allows for a much lower energy requirement for charge separation, thus enabling efficient charging of near-infrared (NIR) PersL in organics by visible light (425-700 nm). Importantly, NIR PersL in organics occurs via the trapping of electrons from charge-transfer aggregates (CTAs) into constructed trap states with trap depths of 0.63-1.17 eV, followed by the detrapping of these electrons by thermal stimulation, resulting in a unique light-storage effect and long-lasting emission up to 4.6 h at room temperature. The xCT absorption range is modulated by changing the electron-donating ability of a series of acenaphtho[1,2-b]pyrazine-8,9-dicarbonitrile-based CTAs, and the organic PersL is tuned from 681 to 722 nm. This study on xCT interaction-induced NIR PersL in organic materials provides a major step forward in understanding the underlying luminescence mechanism of organic semiconductors and these findings are expected to promote their applications in optoelectronics, energy storage, and medical diagnosis.

RESUMEN

Contemporary resource management is doubly burdened by high rates of organic material disposal in landfills, generating potent greenhouse gases (GHG), and globally degraded soils, which threaten future food security. Expansion of composting can provide a resilient alternative, by avoiding landfill GHG emissions, returning valuable nutrients to the soil to ensure continued agricultural production, and sequestering carbon while supporting local communities. Recognizing this opportunity, California has set ambitious organics diversion targets in the Short-Lived Climate Pollutant Law (SB1383) which will require significant increases (5 to 8 million tonnes per year) in organic material processing capacity. This paper develops a spatial optimization model to consider how to handle this flow of additional material while achieving myriad social and ecological benefits through compost production. We consider community-based and on-farm facilities alongside centralized, large-scale infrastructure to explore decentralized and diversified alternative futures of composting infrastructure in the state of California. We find using a diversity of facilities would provide opportunity for cost savings while achieving significant emissions reductions of approximately 3.4 ± 1 MMT CO2e and demonstrate that it is possible to incorporate community protection into compost infrastructure planning while meeting economic and environmental objectives.

Asunto(s)

RESUMEN

Iron/chromium hydroxide coprecipitation controls the fate and transport of toxic chromium (Cr) in many natural and engineered systems. Organic coatings on soil and engineered surfaces are ubiquitous; however, mechanistic controls of these organic coatings over Fe/Cr hydroxide coprecipitation are poorly understood. Here, Fe/Cr hydroxide coprecipitation was conducted on model organic coatings of humic acid (HA), sodium alginate (SA), and bovine serum albumin (BSA). The organics bonded with SiO2 through ligand exchange with carboxyl (-COOH), and the adsorbed amounts and pKa values of -COOH controlled surface charges of coatings. The adsorbed organic films also had different complexation capacities with Fe/Cr ions and Fe/Cr hydroxide particles, resulting in significant differences in both the amount (on HA > SA(-COOH) ≫ BSA(-NH2)) and composition (Cr/Fe molar ratio: on BSA(-NH2) ≫ HA > SA(-COOH)) of heterogeneous precipitates. Negatively charged -COOH attracted more Fe ions and oligomers of hydrolyzed Fe/Cr species and subsequently promoted heterogeneous precipitation of Fe/Cr hydroxide nanoparticles. Organic coatings containing -NH2 were positively charged at acidic pH because of the high pKa value of the functional group, limiting cation adsorption and formation of coprecipitates. Meanwhile, the higher local pH near the -NH2 coatings promoted the formation of Cr(OH)3. This study advances fundamental understanding of heterogeneous Fe/Cr hydroxide coprecipitation on organics, which is essential for successful Cr remediation and removal in both natural and engineered settings, as well as the synthesis of Cr-doped iron (oxy)hydroxides for material applications.

Asunto(s)

RESUMEN

A series of metal- and silica-containing carbon-based nanocomposites were synthesized by pyrolysis of a resorcinol-formaldehyde polymer modified with metal oxide/silica nanocomposites (MxOy/SiO2, where M = Mg, Mn, Ni, Cu and Zn) via the thermal oxidative destruction of metal acetates adsorbed on highly dispersed silica (A380). The concentration of metals was 3.0 mmol/g SiO2. The phase composition and morphological, structural and textural properties of the carbon materials were analyzed by X-ray diffraction, SEM, Raman spectroscopy and low-temperature N2 adsorption. Thermal decomposition under a nitrogen atmosphere and in air was analyzed using TG-FTIR and TG-DTG-DSC techniques to determine the influence of the filler on the decomposition process. The synthesized composites show mesoporous structures with high porosity and narrow pore size distributions. It could be shown that the textural properties and the final composition of the nanocomposites depend on the metal oxide fillers of the precursors. The data obtained show that nickel and copper promote the degree of graphitization and a structural order with the highest porosity and largest specific surface area of the hybrid composites. The good adsorption properties of the obtained materials were shown for the recovery of p-chlorophenol and p-nitrophenol from aqueous solutions.

RESUMEN

When organic matter, especially sodium oxalate (Na2C2O4), accumulates to a certain extent, it will seriously affect the alumina production process in the refinery and therefore urgently needs to be removed. This work attempts to illuminate the benefits of ultrasonic intensification of the crystallization process of Na2C2O4, taking the alumina refinery waste liquor, i.e., flat plate washing liquor, as a case study. The effects of different operating parameters (seed crystal addition amount, caustic soda concentration, reaction time, ultrasonic power) on the crystallization behavior and yield are discussed, and it is found that ultrasonic can increase the Na2C2O4 removal rate to 70.4%. The addition of ultrasonic promotes the morphological evolution of Na2C2O4 and is of great significance to the optimization of the components of the precipitated Na2C2O4. Specifically, the proportion of Na2C2O4 in the crystallized product reaches 64% with conventional conditions, while it reaches 77% with ultrasonic conditions. Therefore, ultrasonic can greatly reduce the alkali loss caused by the crystallization process of Na2C2O4 in flat plate washing liquor, which has great economic benefits.