RESUMEN

The applications of ferrimagnetic nanoparticles (F-MNPs) in magnetic hyperthermia (MH) are restricted by their stabilization in microscale aggregates due to magnetostatic interactions significantly reducing their heating performances. Coating the F-MNPs in a silica layer is expected to significantly reduce the magnetostatic interactions, thereby increasing their heating ability. A new fast, facile, and eco-friendly oil-in-water microemulsion-based method was used for coating Zn0.4Fe2.6O4 F-MNPs in a silica layer within 30 min by using ultrasounds. The silica-coated clusters were characterized by various physicochemical techniques and MH, while cytotoxicity studies, cellular uptake determination, and in vitro MH experiments were performed on normal and malignant cell lines. The average hydrodynamic diameter of silica-coated clusters was approximately 145 nm, displaying a high heating performance (up to 2600 W/gFe). Biocompatibility up to 250 µg/cm2 (0.8 mg/mL) was recorded by Alamar Blue and Neutral Red assays. The silica-coating increases the cellular uptake of Zn0.4Fe2.6O4 clusters up to three times and significantly improves their intracellular MH performances. A 90% drop in cellular viability was recorded after 30 min of MH treatment (20 kA/m, 355 kHz) for a dosage level of 62.5 µg/cm2 (0.2 mg/mL), while normal cells were more resilient to MH treatment.

RESUMEN

Aqueous microemulsions (MEs), where an oil coexists with water in the presence of the anionic surfactant sodium dodecyl sulphate (SDS), have been proposed as a solution to decrease the amount of organic solvent in the mobile phase needed in reversed-phase liquid chromatography (RPLC). However, the oil phase of a typical ME is volatile, toxic and flammable, and although it is added in a small amount, it would be desirable to avoid it from an environmental perspective. This is the reason for the proposal of Peng et al. (J. Chromatogr. A 1499 (2017) 132‒139) to replace the oil in microemulsion liquid chromatography (MELC) by the apolar ionic liquid (IL) 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6C1IM][PF6]), to analyse neutral phenolic acids at acidic pH. Based on this report, an MELC procedure is here proposed for ß-adrenoceptor antagonists, which are basic compounds where the dominant species is cationic. To verify the formation of MEs containing SDS and IL, and elucidate the interactions between the cationic basic compounds with the SDS anion, and the cation and anion in the IL, an extensive study was carried out with several methylimidazolium ILs containing the cations [C2C1IM]+, [C4C1IM]+, or [C6C1IM]+, combined with the anions Cl-, BF4-, or PF6-, using 1-butanol as co-surfactant. The behaviour was compared with that observed in classical MELC with octane, micellar liquid chromatography with SDS and 1-propanol, and RPLC with mobile phases containing an IL and acetonitrile.

Asunto(s)

RESUMEN

The capability of liquid chromatography with microemulsions (MEs) as mobile phases was studied for the analysis of four parabens (butylparaben, ethylparaben, methylparaben, and propylparaben) and seven ß-adrenoceptor antagonists (acebutolol, atenolol, carteolol, metoprolol, oxprenolol, propranolol, and timolol). MEs were formed by mixing aqueous solutions of the anionic surfactant sodium dodecyl sulphate, the alcohol 1-butanol that played the role of co-surfactant, and octane as oil. In order to guarantee the formation of stable MEs, a preliminary study was carried out to determine the appropriate ranges of concentrations of the three components. For this purpose, mixtures of variable composition were prepared, and the possible separation of two phases (formation of an emulsion) was visually detected. The advantage offered by the addition of octane to micellar mobile phases, inside the concentration range that allows the formation of stable MEs, was evaluated by comparing the retention behaviour, peak profile and resolution of mixtures of the probe compounds, in the presence and absence of octane. The final aim of this work was the proposal of a mathematical equation to model the retention behaviour in microemulsion liquid chromatography. The derived global model that considered the three factors (surfactant, alcohol and oil) allowed the prediction of retention times at diverse mobile phase compositions with satisfactory accuracy (in the 1.1‒2.5% range). The behaviour was compared with that found with mobile phases without octane. The model also yielded information about the retention mechanism and revealed that octane, when inserted inside the micelle, modifies the interaction between solutes and micelles.

Asunto(s)

RESUMEN

A green and efficient microemulsion liquid chromatographic (MELC) method using fatty acid as co-surfactant and electrochemical detection was established and validated for the determination of four caffeoylquinic acid isomers and caffeic acid in honeysuckle samples. The influences of each individual component within the isocratic oil-in-water (O/W) microemulsion mobile phase were systematically investigated, such as the type and concentration of co-surfactant, concentration of sodium dodecyl sulphate (SDS), organic modifier addition, type and concentration of oil phase, pH and detection voltage. Results indicated that excellent resolution was achieved using 3.0% w/v of propionic acid, 0.5% w/v of ethyl acetate, 1.0% w/v of SDS, 5% w/v acetonitrile, 90.5% v/v of water and 25 mM sodium dihydrogen phosphate at pH = 3 as microemulsion mobile phase and 0.8 V as the optimal voltage value. Under the optimal condition, analytical performance of developed method was evaluated. The detection limits were below 17.3 ng/mL and intra-day and inter-day precisions by relative standard deviations (RSD%) were between 0.5% and 3.6%. Satisfactory recovery (in the range of 83.8-109.1%) with good repeatability lower than 4.7% (n = 3) was obtained. Therefore, the developed O/W MELC method was rapid, precise and accurate for simultaneous determination of neochlorogenic acid, chlorogenic acid, isochlorogenic acid A and isochlorogenic acid C in honeysuckle samples, with contents of 2.6, 28.7, 18.1 and 5.2 mg/g, respectively.

Asunto(s)

RESUMEN

In this paper, we report the synthesis, characterization of drug-doped organically modified titania nanoparticles, and their applications in sustained drug release. The drug-doped nanoparticles were synthesized in the hydrophobic core of oil-in-water microemulsion medium. Structural aspects obtained through TEM and FESEM depicted that organically modified titania nanoparticles are monodispersed with spherical morphology, with an average size of around 200 nm. Their polymorphic forms and porosity were determined using powder XRD and BET, respectively, which showed that they are present in the anatase form, with a surface area of 136.5 m(2)/g and pore-diameter of 5.23 nm. After synthesis and basic structural characterizations, optical properties were studied for both fluorophore and drug encapsulated nanoparticles. The results showed that though the optical properties of the fluorophore are partially diminished upon nanoencapsulation, it became more stable against chemical quenching. The nanoparticles showed pH-dependent drug release pattern. In vitro studies showed that the nanoparticles were efficiently uptaken by cells. Cell viability assay results showed that though the placebo nanoparticles are non-cytotoxic, the drug-doped nanoparticles show drug-induced toxicity. Therefore, such porous nanoparticles can be used in non-toxic drug delivery applications.

Asunto(s)