RESUMEN

OBJECTIVE: We aimed to evaluate changes in the zygomatic pillar during orthodontic treatment involving premolar extraction, analyze the effects of maxillary first molar movement on zygomatic pillar remodeling, and examine occlusal characteristics and stress distribution after remodeling. METHODS: Twenty-five patients who underwent premolar extraction were included in the study. The zygomatic pillar measurement range was defined, and cross-sectional areas, surface landmark coordinates, alveolar and cortical bone thicknesses, and density changes were assessed using Mimics software based on the cone-beam computed tomography scans taken before (T0) and after the treatment (T1). Multiple linear regression analysis was performed to determine the correlation between changes in the zygomatic pillar and maxillary first molar three-dimensional (3D) movement and rotation. Additionally, the correlation between pillar remodeling and occlusal characteristics was analyzed by Teetester. Pre- and post-reconstruction 3D finite element models were constructed and loaded with an average occlusal force of two periods. RESULTS: The morphological and structural remodeling of the zygomatic pillar after orthodontic treatment involving premolar extraction showed a decreased cross-sectional area of the lower segment of the zygomatic pillar. The zygomatic process point moved inward and backward, whereas the zygomatico-maxillary suture point moved backward. The thicknesses of the zygomatic pillar alveolar and cortical bones were thinner, and reduced alveolar bone density was observed. Simultaneously, the movement and angle change of the maxillary first molar could predict zygomatic pillar reconstruction to a certain extent. With decreasing the total occlusal force and the occlusal force of the first molar, occlusal force distribution was more uniform. With zygomatic pillar remodeling, occlusal stress distribution in the zygomatic alveolar ridge decreased, and occlusal stress was concentrated at the junction of the vertical and horizontal parts of the zygomatic bone and the posterior part of the zygomatic arch. CONCLUSIONS: Orthodontic treatment involving premolar extraction led to zygomatic pillar remodeling, making it more fragile than before and reducing the occlusal force of the maxillary first molar and the entire dentition with stress concentrated in weak areas. CLINICAL RELEVANCE: No other study has focused on the effects of orthodontics on pillar structures. The present study indicates that the mesial movement of the maxillary first molar weakened the zygomatic pillar and reduced occlusal function, thereby providing insights for inserting anchorage screws and facial esthetics.

Asunto(s)

RESUMEN

BACKGROUND: The T-scan system has been used previously to analyse occlusion, but the quantitative analysis of occlusal contact by T-Scan system has yet to be reported. OBJECTIVES: To evaluate the reliability and validity of T-Scan system for quantitatively measuring occlusal contact area and occlusal contact number. METHODS: Twenty-two individuals with normal occlusion, 11 men and 11 women, were recruited for the study. Two occlusal analysis methods, including silicone transmission analysis method (STA) and T-Scan occlusion analysis method (TSO), were used to make quantitative analysis to measure occlusal contact area (OCA) and occlusal contact number (OCN). A test-retest check was performed with an interval of 2 weeks. The values of intraclass correlation coefficients (ICC) between test-retest of each method were calculated for reliability evaluation. Pearson correlations analysis, paired t-tests, regression analysis and Bland-Altman analysis were performed for validity evaluation. RESULTS: The ICC values of STA were greater than those of TSO for OCA while for OCN, ICC values of TSO were greater than STA. The higher OCA and OCN values were found in TSO compared with STA. Pearson's correlation coefficient indicated strong relations between TSO and STA (0.730-0.812) for OCA, while good relations between then (0.569-0.583) for OCN. Paired t-test showed a significant difference between the OCA and OCN values between TSO and STA. Bland-Altman analysis showed good agreement between OCA and OCN values of TSO and STA both in men and women. Regression analysis identified a linear correlation between OCA values obtained from these two methods. CONCLUSIONS: T-Scan method showed strong reliability for measuring OCA and OCN quantitatively. Strong correlations were found between OCA values from TSO and STA method, but the validity of TSO for measuring OCN needs to be promoted. CLINICAL SIGNIFICANCE: T-Scan system demonstrates good potential in quantitative analysis of occlusion, which will expand its clinical application.

Asunto(s)

RESUMEN

Alterations in occlusal features may have significant consequences, ranging from dental aesthetics to health issues. Temporomandibular joint disorders (TMDs) are often associated with joint overload, and the correlation between occlusal features and TMDs has been thoroughly discussed. In current work, we introduced a novel stomatognathic model that aligns well with in vivo experimental measurements, specifically designed to decouple the impact of occlusal contact and periodontal ligament (PDL) negative feedback on temporomandibular joint (TMJ) loading. Utilizing an in-silico approach, the simulation analysis included six symmetric occlusal contact scenarios. Furthermore, a biomechanical lever model was employed to clarify the mechanical mechanism and investigate the multi-factorial effects of TMJ overload. These findings indicate that anterior shifts in the occlusal centre lead to increased TMJ loading, particularly in occlusal contact cases with anteroposterior changes. Considering the symmetrical distribution of occlusal contact, mediolateral alterations had a more modest effect on TMJ loading. Additionally, potential negative feedback activated by principal strain of periodontal could not only alleviate joint load but also diminish occlusal force. These investigations enhance our understanding of the intricate interactions between masticatory muscles, occlusal forces, and joint contact forces, thereby providing motivation for future comprehensive studies on TMJ biomechanical overload.

Asunto(s)

RESUMEN

OBJECTIVES: The objective of this study was to analyze the occlusal contact characteristics of the food-impacted teeth using a new digital technique. METHODS: A 3D occlusal analysis method was developed for studying the occlusal contact characteristics of teeth affected by food impaction. In this self-controlled study, food-impacted molars from 20 participants constituted the experimental group. The corresponding healthy teeth on the opposite side served as the control group. Variables such as occlusal force (OF), occlusal contact area (OCA), and the number and distribution of occlusal contact points (OCN) in the mesio-distal directions were measured and compared between the two groups. RESULTS: There was no statistical significant difference in the values of OF, OCA and OCN between the food-impacted molars and the healthy control molars (P > 0.05). However, paired T-tests indicated significant difference in the proportion of mesial OF, OCA, and OCN in the second molars of the experimental group (0.22, 0.28 and 0.28, respectively) and the control group (0.66, 0.63, and 0.63 respectively) (P < 0.001). CONCLUSIONS: The abnormal distribution of occlusal contacts in the second molar, primarily characterized by excessive occlusal contact in the distal direction may contribute to the occurrence of food impaction. CLINICAL SIGNIFICANCE: The present study identified variations in the distribution of occlusal contacts and occlusal component force in food-impacted teeth. These findings can assist dentists in making more targeted occlusal adjustments, or applying other treatment modalities, to effectively address food impaction.

Asunto(s)

RESUMEN

PURPOSE: The purpose of this study was to analyse the distribution of occlusal forces in the dental arches released during tooth clenching in patients with symptoms of temporomandibular disorders, and to analyse the age and gender structure of the patients in the study group and the control group. MATERIALS AND METHOD: The study was carried out on a group of 58 patients, of both genders, aged 18-40 years, with full dental arches, who presented for treatment at the Prosthodontics Clinic of the University Dental Clinic in Kraków due to symptoms of temporomandibular disorders. The patients were divided into two groups. The first group (study group) comprised 26 patients with painful temporomandibular disorders, while the second group (control group) comprised 32 patients without pain. The study only included patients over 18 years of age, with full dental arches with symptoms of temporomandibular disorders. All patients underwent a basic dental examination and a specialized functional examination of the masticatory organ. A T-Scan III-Novus instrument with electronic occlusal articulation paper was used to assess the distribution of occlusal contacts. RESULTS: In the study, women (43) were a larger group than men (15). Statistically significant values for the percentage distribution of occlusal contacts were obtained in group of women in the study group on the right and left side, in the area of molars and premolars. In the analysis of the percentage distribution of occlusal contacts in both the study and control groups, it can be seen that the first molars (teeth 16 and 26) showed a larger percentage range of values than the other teeth. The smallest values can be observed on the second incisal teeth and on the canines. CONCLUSIONS: The first molars are, in the majority of patients, the teeth on which the strongest occlusal contacts are generated. Excessive participation of incisal teeth in occlusion might influence the development of the pain form of TMD. In order to determine whether there is a correlation between an uneven distribution of occlusal contacts and TMD pain, studies on larger numbers of patients are needed. © 2024 Australian Dental Association.

RESUMEN

Age estimation is an essential step in identifying human corpses. Several mandibular landmarks have been highlighted as skeletal sites for age estimation since aging causes morphological changes. Reports suggest that mandibular torus size may be associated with aging; however, thorough investigation has not been performed owing to the difficulty in measuring it. Therefore, this study aimed to determine the association between age and mandibular torus thickness using postmortem computed tomography data from Japanese corpses. This study included 2,792 corpses with mean (standard deviation) age of 58.0 (22.4) years (range, 0-101 years) and 67.6 % males. Further, 2,662 (95.3 %), 14 (0.5 %), 59 (2.1 %), and 57 (2.0 %) corpses were in the permanent, mixed, primary, and predental dentition periods, respectively. Multivariable analysis was performed to quantify the impact of age on mandibular torus thickness, adjusting for sex, height, weight, and occlusal contact status. The model also included an interaction term between age and occlusal status because of the potential effect modification by occlusion. Results of the multivariable regression analysis showed that mandibular torus thickness increased with age (the regression coefficients (95 % confidence interval) were 0.6 (0.2-1.0), 0.7 (0.3-1.0), 1.0 (0.6-1.4), 1.3 (0.9-1.7), 1.3 (0.8-1.8), and 1.1 (0.4-1.7) for age groups 30-39, 40-49, 50-59, 60-69, 70-79, and 80-89 years, respectively), especially in males with occlusal contact. A significant association between mandibular torus thickness and age, modified by occlusal status and sex, was identified. Therefore, data regarding the thickness of the mandibular torus and occlusal status may be useful for age estimation in human corpses.

Asunto(s)

RESUMEN

BACKGROUND:Bone tissue remodeling is closely related to stress loading.Currently,there are few studies or guidelines on the relationship between bone and occlusal adjustment of implant prostheses and there is also a lack of scientific evidence. OBJECTIVE:To investigate the effects of different implant occlusal gaps on stress distribution,stress peak and displacement at the implant-bone interface under Ⅰ-Ⅳ bone conditions by a finite element method. METHODS:After scanning the equal-scale tooth model with an optical scanner,equal-scale models of the upper right first molar Straumann 4.8×8 mm BL RC implant and its related components was constructed using Solidworks 2022.Then,using Mimics,Geomagic,and Solidworks software,the maxillary and mandibular bone models of class Ⅰ-Ⅳ bones were established based on the bone classification proposed by ZARB and LEKHOLM in the literature,and the NORTON and TRISI bone density classification method.The models were assembled with the occlusal gaps of 0,20,40,60,80,and 100 μm for the restorations,and an additional set of homogeneous models without density ratio settings was constructed for comparison.After the above models were imported into Hypermesh for meshing,the material assignment,boundary constraints and parameter setting were performed for the finite element analysis.Finally,250 N was used as the loading force to simulate the maxillary and mandibular stress conditions.Stress distribution,peak stress and displacement of the implant-bone interface in each group of models were analyzed and compared. RESULTS AND CONCLUSION:Under the same loading conditions,the stresses in the implant restorations were evenly distributed with the occlusal contact points.When the occlusal gap reached 80 and 100 μm,stress interruptions occurred in the implant crowns under class Ⅰ bone and class Ⅱ,Ⅲ and Ⅳ bones,respectively.The displacement of the implant-bone interface was mainly concentrated in the cortical bone region around the implant and transmitted down the long axis of the implant to the cancellous bone region at the bottom.With the changes of class Ⅰ-Ⅳ jaw bones,the displacement and Von Mises stress in the cortical bone region increased in all groups,and were greater than those in the cancellous bone region.The Von Mises stress in the cancellous bone region was similar to that in the cortical bone region except that it showed a downward trend from class Ⅱ bone.However,when the occlusal gap increased,the stress and displacement peak values in the cortical bone and the cancellous bone showed a decreasing trend.The stress of the implant-bone interface was between 20 MPa and 60 MPa when the occlusal gap was 0-40 μm for class Ⅱ-Ⅳ bones and 60 μm for class Ⅳ bone,and the stress of the other groups was less than 20 MPa.The Von Mises stress was mainly concentrated in the neck of the implant,and the peak value of von Mises stress in class Ⅱ-Ⅳ bones with the occlusal gap of 20 μm was higher than that(144.10 MPa)in class Ⅰ bone with the occlusal gap of 0 μm.In the homogeneous model with different elastic moduli,the distribution of stress and displacement was more uniform than that in the heterogeneous model and the occlusal space should increase with the decrease of jaw bone density in clinical practice.To conclude,from the perspective of biomechanics,the alveolar bone should be taken into account in the occlusal adjustment of implant denture.An occlusal gap of 20-40 μm between a single dental implant and a natural tooth in the opposite jaw is a relatively suitable solution for occlusal adjustment under different bone conditions.However,due to the particularity of finite element analysis method,it needs to be further studied in combination with clinical practice.

RESUMEN

PURPOSE: Individuals with impaired masticatory function tend to prefer soft foods, which results in decreased masticatory muscle activity. This study examined the association between the oral condition (number of teeth, occlusal force, and occlusal contact area) and dietary hardness using a daily dietary questionnaire. METHODS: This cross-sectional study evaluated 1841 participants aged 69-71 and 79-81 years. Registered dentists examined the number of teeth, occlusal force, and occlusal contact area. Dietary hardness was defined as the estimated masticatory muscle activity required for a habitual diet. Habitual diet during the preceding month was assessed using a brief self-administered diet history questionnaire. Confounding factors, such as age, sex, socioeconomic status, smoking habits, history of chronic diseases (hypertension, hyperlipidemia, and diabetes), and cognitive function were also evaluated. Multivariate linear regression analyses were performed to assess the association between dietary hardness and each oral condition. RESULTS: Occlusal force (standardized regression coefficients [ß]=0.08, P < 0.01) and occlusal contact area (ß=0.06, P < 0.01) were significantly associated with dietary hardness after adjusting for the confounding factors. Number of teeth was not significantly associated with dietary hardness. In addition, the associations between dietary hardness, sex, and a history of diabetes were stronger than those between dietary hardness and oral factors. CONCLUSIONS: Occlusal force and contact area were significantly associated with dietary hardness as estimated from the masticatory muscle activity using a daily diet questionnaire.

RESUMEN

This systematic review and meta-analysis aimed to summarize the effectiveness of bonded and removable retainers (the Hawley and Essix retainers) in terms of improving occlusal settling (occlusal contact points/areas) after orthodontic treatment. We searched the Cochrane Library, PubMed, CINAHL Plus, and Dental & Oral Sciences Source (DOSS), as well as SIGLE, Google Scholar and ClinicalTrials.gov for eligible studies. We included randomized and non-randomized controlled trials along with cohort studies. Studies that reported occlusal contacts/areas during retention with fixed bonded and removable retainers were included. To assess the quality of the randomized controlled trials (RCTs), the Cochrane Collaboration risk-of-bias (RoB) tool was utilized, whereas the Newcastle-Ottawa Scale (NOS) was used to assess the quality of cohort studies.We included 6 articles in our systematic review after scrutinizing 219 articles and eliminating the illegible ones based on duplication, titles, abstracts, and objectives. Bonded retainers (BRs) allowed faster and better posterior occlusal settling as compared to the Hawley retainer (HR). However, HR showed good occlusal settling in the anterior dental arch. The Essix retainer (ER) showed a decrease in occlusal contact during the retention phase. Meta-analysis showed no statistically significant difference between BRs and removable retainers. In conclusion, HR allowed better overall occlusal settling as compared to other retainers. However, BRs allowed faster settling in the posterior tooth region. The Essix retainer showed poor settling of occlusion. Overall, there is an insufficient number of high-quality RCTs to provide additional evidence, and further high-quality RCTs are needed.

Asunto(s)

RESUMEN

BACKGROUND: This study aimed at investigating the effect of loose teeth on the accuracy of occlusal records by comparing the differences in the number of occlusal contact points, occlusal contact area and the centre of the occlusal contact region under different occlusal forces in patients with periodontitis. OBJECTIVE: The effects of different occlusal forces on the occlusal contact point (OCP), occlusal contact area (OCA) and the centre of occlusal contact region (OCC) of loose teeth. METHODS: Occlusal training was performed on the 30 patients who completed periodontal serial treatment. One doctor took the occlusal records with silicone rubber and the T-scan system; the patients were digitally scanned intraorally by a technician. The data of the healthy teeth were recorded as the control group, and the data of the loose teeth were recorded as the experimental group. Then, we used Image J to measure the numbers of OCP and OCA and Auto CAD to calculate the coordinates of OCC. A paired t test was used to analyse whether the differences in OCP, OCA and OCC were statistically significant when the occlusal forces were different. RESULTS: The OCA of all three experimental methods increased under heavy occlusal force (p < .01), and the silicone rubber OCA increased the most. The OCC of all three experimental methods was shifted in the buccal and mesial (p < .01). And the occlusal records obtained by the T-scan system showed a low correlation between the differences of OCA and OCC. CONCLUSION: Whether the teeth were loose or not, the OCA increased under heavy occlusal forces. For patients with loose teeth, the OCC was shifted towards the buccal under heavy occlusal force.

Asunto(s)

RESUMEN

Purpose: The objective of the present study was to determine the accuracy of T-scan system and Cerec Omnicam system with respect to the evaluation of occlusal contact by quantitatively comparing the occlusal contact areas and the overlapping ratios of occlusal contact areas obtained from these systems. Material and methods: The occlusal contact of 20 adolescents with normal occlusion was measured with the T-scan system and the Cerec Omnicam system, respectively. The occlusal contact areas in the intercuspal position were then quantified with Adobe Photoshop CS6 Software. The same procedure was repeated for each subject using with 8 µm articulating paper as the control group. The overlapping ratio of T-scan system and Cerec Omnicam system was calculated respectively, which is defined as the ratio of overlapping areas comparing with those obtained from articulating paper. To examine the accuracy of T-scan system and Cerec Omnicam system, the Paired t-test was applied. The reproducibility of T-scan system was evaluated with Wilcoxon matched-pairs signed-ranks test by comparing the occlusal contact areas between two repeated measurements. In all statistical analysis, the level of significance was set to α = 0.05. Results: Results demonstrated measured occlusal contact areas were significantly different between those obtained between T-scan system and Cerec Omnicam system (P < 0.05). The tooth position of two-dimensional virtual dental arch established by T-scan system based on the width of the central incisor was in disagreement with the actual tooth position. The overlapping ratios obtained from Cerec Omnicam system were higher than those obtained from the T-Scan system (P < 0.05). The sensitivity of T-Scan system in anterior teeth area decreased when sensors are used more than once (P < 0.05). Conclusions: In the intercuspal position, the accuracy of Cerec Omnicam system for occlusal contact assessment is higher than that of T-scan system. The T-scan system demonstrates good reproducibility in the premolar region and the molar region, but poor reproducibility in the anterior teeth region. Clinical implications: In the intercuspal position, Cerec Omnicam system is more accurate than T-scan system, which can quantitatively analyze occlusal relationship in terms of number, position, size and distribution of occlusal contact points. When evaluating occlusal contacts, the accuracy of T-scan system in anterior teeth region is significantly lower than that of premolar and molar regions.

RESUMEN

BACKGROUND: Although jaw asymmetry is commonly seen in skeletal Class III patients, its correlation with occlusal function and masticatory muscle activity has not been fully elucidated. OBJECTIVES: The purpose of this study was to investigate the occlusal function and masticatory muscle activity in skeletal Class III patients with various patterns of mandibular asymmetry. METHODS: Forty-two patients and 10 normal participants were examined. The patients were categorised into three groups. Groups 1 and 2 exhibited menton and ramus deviation to the same side. Menton deviation was larger than ramus deviation in Group 1, whereas Group 2 showed the inverse relation. Group 3 patients showed menton and ramus deviation in opposite directions. Occlusal contact area (OCA), relative bite force (RBF), and temporalis anterior (TA) and masseter muscle (MM) activity at maximum clenching were measured using T-Scan Novus system and Bio-EMG-III. Statistical analysis was performed using the t-test, one-way analysis of variance with Bonferroni correction and Spearman correlation (α = .05). RESULTS: Compared with normal participants, the patients had smaller OCA and greater asymmetry in the distribution of masticatory muscle activity. Greater ramus deviation was associated with smaller OCA in Group 1 but with larger OCA in Group 3. In Group 1, greater menton deviation was related to stronger TA activity on the non-deviation side. In Group 2, greater ramus deviation was related to stronger MM activity on the deviation side. CONCLUSION: Deviation of the menton and ramus was individually related to OCA and masticatory muscle activity, and this relationship varied according to the pattern of mandibular asymmetry.

Asunto(s)

RESUMEN

OBJECTIVES: To investigate the impact of the occlusal contact situation and occlusal adjustment on wear, roughness, and fracture force of molar crowns. MATERIALS AND METHODS: CAD/CAM crowns (lower right first molar, n = 64; 4 groups à 8, 3Y-TZP zirconia and resin composite) and corresponding antagonists (upper right first molar; 3Y-TZP zirconia) were manufactured. Crowns were constructed according to two principles of occlusion (group "T": Peter K. Thomas' "point-centric" cusp-to-fossa tripodization concept, with 15 contact points; group "RA" Sigurd P. Ramfjord and Major M. Ash, "freedom in centric" concept with four contacts). On one half of the crowns, occlusal adjustment was performed (groups "T adjusted" and "RA adjusted"). All crowns underwent combined thermal cycling (TC) and mechanical loading (ML) (ML: 1.2 × 106 cycles, 50 N, 2 Hz, mouth opening 1 mm; TC: 2 × 3000 cycles, 5/55°C). Wear area and depth of each contact point on the occlusal surfaces of crowns and antagonists were determined using a digital microscope. Surface roughness (Ra, Rz) was measured in and besides (reference) the worn area (3D laser-scanning microscope). Fracture force of the crowns was determined (statistics: Levene-test, one-way-ANOVA; Bonferroni-post-hoc-test; between-subjects effects, Pearson correlation, α=0.05). RESULTS: The resin composite crowns yielded significantly higher mean values for wear area and depth (p < 0.001) and lower fracture forces (p < 0.001). Resin composite surfaces showed increased roughness after TCML while zirconia exhibited smoothened surfaces. The occlusal design significantly impacted wear depth (p = 0.012) and fracture force (p < 0.001). Resin composite crowns with fewer contact points (group RA) showed more wear and lower fracture force. Adjusted resin composite crowns showed increased wear areas and depths (p = 0.009-0.013). For zirconia crowns, the adjustment impacted wear area (p = 0.013), wear depth (p = 0.008), and fracture force (p = 0.006), with adjusted zirconia crowns exhibiting more wear and lower maximum forces until fracture. Zirconia wear depth was also impacted by the occlusal design (p = 0.012). Antagonistic wear was influenced by the restorative material, the occlusal contact pattern, and the adjustment. CONCLUSIONS: The investigated materials show strongly varying performances with zirconia being significantly influenced by the adjustment, while for resin composites, contact design and adjustment had a major impact. CLINICAL RELEVANCE: The results show the necessity of adapting occlusal design and adjustment in order to improve roughness, wear, and stability of zirconia and resin composite crowns.

Asunto(s)

RESUMEN

OBJECTIVES: The purpose of this self-controlled clinical study was to evaluate the trueness of occlusal contacts of chairside CAD/CAM crowns fabricated using different ceramic materials. MATERIALS AND METHODS: Ten volunteers (8 females, 2 males, average aged 20-30) were recruited in this study registered in the Clinical Trials Registry (#NCT05346744). After tooth preparation on tooth 36 or 46, an optical scan unit (CEREC Omnicam, Sirona Dental Systems, Germany) was utilized to perform the intraoral scanning. For each volunteer, 6 crowns were fabricated via the chairside CAD/CAM process (CEREC, Sirona Dental Systems, Germany) using the following materials: InCoris TZI (ZIR), Celtra Duo (CD), e.max CAD (EMA), UP.CAD (UP), Enamic (ENA) and Hyramic (HY). The microhardness of the milled surfaces was measured through a Vickers hardness Tester (HVS-50Z, Trojan, China). Together with the amount of occlusal adjustment, the occlusal contact trueness at both milling and postprocessing stages were quantitatively analyzed by using a high-precision scanner (ATOS, GOM Technologies, USA) and a reverse engineering software (Geomagic Control, 3D Systems, Rock Hill, SC). The times of chairside occlusal adjustment were also recorded. Data were analyzed by one-way analysis of variance (ANOVA) and ANOVA with randomized block design followed by Bonferroni test (p = 0.05). RESULTS: Significant differences were found in surface microhardness of the materials tested (CD > EMA ~ UP > ENA > HY > ZIR, p < 0.05). Regarding the occlusal contact trueness at milling stage, ZIR showed the lowest (p < 0.05), while no significant difference was found among others (p > 0.05). At postprocessing stage, except for ENA, the occlusal contact trueness of ZIR was significantly lower than that of others (p < 0.05). As for occlusal adjustment amount, ZIR was lower than CD and ENA (p < 0.05). In addition, ENA, HY and ZIR required fewer times of occlusal adjustment than EMA, UP and CD. CONCLUSIONS: The type of chairside CAD/CAM ceramic materials affected the occlusal contact trueness throughout the process of manufacturing and the amount of clinical occlusal adjustment as well. Zirconia exhibited the worst occlusal contact trueness at both milling and postprocessing stages, while the amount of occlusal adjustment was the least, which recommended the least occlusal compensation. CLINICAL RELEVANCE: For better trueness, different negative occlusal offsets are suggested to be applied in the design process, so as to suit the material of the restoration.

Asunto(s)

RESUMEN

OBJECTIVES: To evaluate changes in masticatory performance (MP) during the retention period after extraction and non-extraction treatment and compare it with MP in individuals with normal occlusion. MATERIALS AND METHODS: Adult patients who had completed orthodontic fixed appliance treatment comprised the extraction and non-extraction treatment groups, and those with normal occlusion comprised the control group. Their mixing ability (MA), maximum bite force (MBF), and occlusal contact area (OCA) were recorded immediately after the fixed appliance was removed and at 1 month, 6 months, and 1 year post-treatment. The MA was measured via the two-color chewing gum MA test using ViewGum software, and the MBF and OCA were measured using Dental Prescale II system. RESULTS: MA immediately after orthodontic treatment was lower than that in the normal group but showed a time-dependent gradual increase during a 1-year retention period (P < 0.01). The MA at 1 month post-treatment was not significantly different between the three groups (P > 0.05). The MA revealed a significant correlation with the MBF and OCA (P < 0.01). CONCLUSIONS: The MP immediately after orthodontic treatment was lower than that in the normal group but increased gradually, with levels comparable to those of the normal occlusion group at 1 month post-treatment. Further, extraction did not affect the recovery of the MP after orthodontic treatment. CLINICAL RELEVANCE: No other study has evaluated the changes in MP during the retention period after orthodontic treatment. The findings show that compared with MBF and OCA, the patients' MP improved faster to levels found in normal occlusion.

Asunto(s)

RESUMEN

The present systematic review was done to assess the available literatures on changes in the number of occlusal contacts (NOC), occlusal contact surface areas, and occlusal force distribution (OFD) with vacuum-formed retainers (VFRs) or clear overlay retainers during retention and to compare them with other retainers. Six electronic databases (Web of Science, Scopus, PubMed, Cochrane Library, Lilacs, and Google Scholar) were searched. Randomized controlled trials (RCTs) and controlled clinical trials (CCTs) reporting on occlusal contact changes with VFRs were included. A total of nine articles were included in this review: three RCTs, five prospective controlled trials (PCTs), and one CCT. The Cochrane risk of bias tool and ROBINS-I tool were used for risk of bias assessment. The three RCTs showed moderate risk of bias, and out of five CCTs, four showed low risk of bias, and one showed moderate risk of bias. One CCT showed a low risk of bias in the ROBINS-I tool. Two out of four studies reported improved occlusal surface area (OSA) with VFRs when assessed at the end of six months and 12 months; one out of four studies reported improved NOC; and one study reported a decrease in OFD anteriorly and an increase in OFD posteriorly after two months of retention. On comparison between the groups, the other retainer groups showed more NOCs compared to VFRs. The limited available evidence suggests an increase in OSA and no change in NOCs and OFD with VFRs during retention. No significant differences between VFRs and other retainers for OSA and OFD were noted, and more NOCs were noted for other retainer groups.

RESUMEN

BACKGROUND: During the mixed dentition period, masticatory performance may temporarily decline as deciduous teeth are replaced by permanent teeth. This may lead to an insufficient intake of chewy foods. OBJECTIVES: This study aimed to clarify the characteristics of factors that affect masticatory performance during the dentition exchange period. METHODS: The participants were 229 students in grades 4-6 who were in the lateral dentition exchange period. Shearing performance (SP) was evaluated using gummy jelly, and mixing performance (MP) was evaluated using colour-changing gum. The chewing rate, occlusal force and area, number of teeth, Hellman's tooth age, Rohrer index, grip strength and walking speed were also evaluated. The χ2 test, Mann-Whitney test, Spearman's rank correlation coefficient and a generalised linear model were used for statistical analysis. RESULTS: SP/MP showed a significant positive correlation with occlusal force, occlusal contact area and chewing rate for gummy jelly and gum but there was a difference in the strength of the correlation between boys and girls. Chewing rate for gummy jelly and gum showed a significant relationship with both SP and MP, suggesting that masticatory performance is higher with slower chewing. Maximum occlusal force was selected as a significant independent variable for SP, and Rohrer index was selected as a significant independent variable for MP. When the occlusal force was higher and the Rohrer index was lower, the masticatory performance tended to be higher. CONCLUSIONS: Our results suggest that masticatory performance during the dentition exchange period is higher with slower chewing and a stronger occlusal force, which may be related to obesity.

Asunto(s)

RESUMEN

AIM: The accuracy and reproducibility of occlusal contact points visualized by articulating foil (AF) were investigated and then compared with those calculated by three different intraoral scanners (IOSs). MATERIALS AND METHODS: Occlusal contact points were visualized on a standardized resin dental tooth model using AF 50 times in maximum intercuspation and with a constant biting force. The occlusal contact points were photographed from a vertical position above the model and superimposed on a screen to test the reproducibility of the model. This was followed by 50-fold repetition by scans and computation of the occlusal contact points by three different IOSs: CS 3600 (CS ScanFlow v.1, 4th version), Trios 3 (Basic 2019), and Cerec Omnicam (software version 5.1). The results of the computation were captured with screenshots and were then overlaid with the photographs of the AF. The image overlays were classified into five categories: 1 = total overlapping of contact points, 2 = partial overlapping of contact points, 3 = adjacent contact points without overlapping, 4 = contact points identified only by AF, 5 = contact points identified only by IOS. All data were statistically evaluated (95% confidence interval). RESULTS: In total, the visualization of the occlusal contact points by the IOSs were significantly less accurate and less reproducible compared with the AF (P < 0.05). When sensitivity and accuracy were combined, the Trios 3 (3Shape) showed significantly better results than the other IOSs tested (P < 0.05). CONCLUSION: In vitro, AF displayed a significantly more accurate visualization of the occlusal contact points than the IOSs.

Asunto(s)

RESUMEN

Objective: The objectives of this study were to compare the time-dependent changes in occlusal contact area (OCA) and bite force (BF) of the deviated and non-deviated sides in mandibular prognathic patients with mandibular asymmetry before and after orthognathic surgery and investigate the factors associated with the changes in OCA and BF on each side. Methods: The sample consisted of 67 patients (33 men and 34 women; age range 15-36 years) with facial asymmetry who underwent 2-jaw orthognathic surgery. OCA and BF were taken before presurgical orthodontic treatment, within 1 month before surgery, and 1 month, 3 months, 6 months, 1 year, and 2 years after surgery. OCA and BF were measured using the Dental Prescale System. Results: The OCA and BF decreased gradually before surgery and increased after surgery on both sides. The OCA and BF were significantly greater on the deviated side than on the non-deviated side before surgery, and there was no difference after surgery. According to the linear mixed-effect model, only the changes in the mandibular plane angle had a significant effect on BF (p < 0.05). Conclusions: There was a difference in the amount of the OCA and BF between the deviated and non-deviated sides before surgery. The change in mandibular plane angle affects the change, especially on the non-deviated side, during the observation period.

RESUMEN

Previously, bite force, occlusal contact and pain were investigated in orthodontic patients with moderate-to-severe malocclusion, but not in patients with minor malocclusion. The purpose of this study was to investigate changes in bite force, teeth in occlusal contact and pain in orthodontic patients with minor crowding before orthodontic treatment (T0), after bonding (T1), during treatment (T2), post-treatment (T3) and during retention (T4). In total, 27 patients (21 females, 6 males, median age 15.3 years) with neutral occlusion and normal craniofacial morphology were treated with non-extractions and fixed appliances. Differences in the registered data were analysed by a mixed linear model with repeated measures. Bite force and teeth in occlusal contact significantly decreased between T0 and T1 (p < 0.0001, respectively) and between T0 and T2 (p < 0.01, respectively). Bite force and teeth in occlusal contact significantly increased between T1 and T4 (p < 0.05, p < 0.0001, p < 0.001, respectively) and between T2 and T4 (p < 0.05, p < 0.0001, p < 0.01, respectively). No significant difference in pain was found. The results indicate that bite force and teeth in occlusal contact significantly decreased during treatment and reached baseline level at retention. The findings may prove valuable for informing orthodontic patients with minor malocclusion.