RESUMEN

The oral and nasal cavities serve as critical gateways for infectious pathogens, with microorganisms primarily gaining entry through these routes. Our first line of defense against these invaders is the mucosal membrane, a protective barrier that shields the body's internal systems from infection while also contributing to vital functions like air and nutrient intake. One of the key features of this mucosal barrier is its ability to protect the physiological system from pathogens. Additionally, mucosal tolerance plays a crucial role in maintaining homeostasis by regulating the pH and water balance within the body. Recognizing the importance of the mucosal barrier, researchers have developed various mucosal formulations to enhance the immune response. Mucosal vaccines, for example, deliver antigens directly to mucosal tissues, triggering local immune stimulation and ultimately inducing systemic immunity. Studies have shown that lipid-based formulations such as liposomes and virosomes can effectively elicit both local and systemic immune responses. Furthermore, mucoadhesive polymeric particles, with their prolonged delivery to target sites, have demonstrated an enhanced immune response. This Review delves into the critical role of material selection and delivery approaches in optimizing mucosal immunity.

Asunto(s)

RESUMEN

The assessment of the mucoadhesive properties peak mucoadhesive force (Fmax) and work of mucoadhesion (Wmuc) with texture analyzers is a common in vitro method for analyzing formulation capabilities. Challenges arise in selecting and standardizing experimental conditions due to various variables influencing mucoadhesion. This complexity hampers direct product performance comparisons. In our study, we explored factors (contact force and time, probe speed and mucin in artificial saliva) impacting a model formulation's mucoadhesive capacity. Using Omcilon-A®Orabase on porcine buccal mucosa, we systematically varied experimental conditions, employing a statistical approach (Central Composite Design - CCD). Three variables (contact force, contact time, probe speed) and their interactions were assessed for their impact on Fmax and Wmuc. Results showed that contact time and force positively affected Fmax, while only contact time influenced Wmuc. In the mucin artificial saliva test, a force of 0.5 N, time of 600 s, and speed of 1 mm/s yielded optimal Fmax (0.587 N) and Wmuc (0.468 N.s). These conditions serve as a reference for comparing mucoadhesive properties of formulations for topical oral use.

Asunto(s)

RESUMEN

This study aimed to control the oral absorption of cyclosporine A (CsA) with the use of a mucosal drug delivery system (mDDS). Mucopenetrating nanocarriers (MP/NCs) and mucoadhesive nanocarriers (MA/NCs) were prepared by flash nanoprecipitation employing polystyrene-block-poly(ethylene glycol) and polystyrene-block-poly(N,N-dimethyl aminoethyl methacrylate), respectively. Their particle distribution in the rat gastrointestinal tract were visualized by fluorescent imaging. Plasma concentrations were monitored after oral administration of CsA-loaded MP/NCs (MP/CsA) and MA/NCs (MA/CsA) to rats. MP/NCs and MA/NCs had a particle size below 200 nm and ζ-potentials of 4 and 40 mV, respectively. The results from in vitro experiments demonstrated mucopenetration of MP/NCs and mucoadhesion of MA/NCs. Confocal laser scanning microscopic images showed diffusion of MP/NCs in the gastrointestinal mucus towards epithelial cells and localization of MA/NCs on the surface of the gastrointestinal mucus layer. In a pH 6.8 solution, rapid and sustained release of CsA were observed for MP/CsA and MA/CsA, respectively. After oral dosing (10 mg-CsA/kg) to rats, amorphous CsA powder exhibited a time to maximum plasma concentration (Tmax) of 3.4 h, maximum plasma concentration (Cmax) of 0.12 µg/mL, and bioavailability of 0.7%. Compared with amorphous CsA powder, MP/CsA shortened Tmax by 1.1 to 2.3 h and increased the bioavailability by 43-fold to 30.1%, while MA/CsA prolonged Tmax by 3.4 to 6.8 h with Cmax and bioavailability of 0.65 µg/mL and 11.7%, respectively. These pharmacokinetic behaviors would be explained by their diffusion and release properties modulated by polymeric surface modification. The mDDS approach is a promising strategy for the pharmacokinetic control of orally administered CsA.

Asunto(s)

RESUMEN

The past two decades have witnessed a rapid progress in the development of surface charge-reversible nanoparticles (NPs) for drug delivery and diagnosis. These NPs are able to elegantly address the polycation dilemma. Converting their surface charge from negative/neutral to positive at the target site, they can substantially improve delivery of drugs and diagnostic agents. By specific stimuli like a shift in pH and redox potential, enzymes, or exogenous stimuli such as light or heat, charge reversal of NP surface can be achieved at the target site. The activated positive surface charge enhances the adhesion of NPs to target cells and facilitates cellular uptake, endosomal escape, and mitochondrial targeting. Because of these properties, the efficacy of incorporated drugs as well as the sensitivity of diagnostic agents can be essentially enhanced. Furthermore, charge-reversible NPs are shown to overcome the biofilm formed by pathogenic bacteria and to shuttle antibiotics directly to the cell membrane of these microorganisms. In this review, the up-to-date design of charge-reversible NPs and their emerging applications in drug delivery and diagnosis are highlighted.

Asunto(s)

RESUMEN

OBJECTIVE: Developing mucoadhesive buccal films loaded with metoclopramide for the treatment of migraine-associated vomiting. METHODS: Buccal films were prepared using the solvent casting method. Several tests were conducted, including measurement of film weight, thickness, drug content, moisture uptake, swelling index, and DSC analysis. The bioadhesion properties were also assessed. Furthermore, in vitro release profiles and in human bioavailability were studied. RESULTS: The developed films were transparent, homogeneous, and easy to remove. Film weight and thickness increased with higher drug content. The drug entrapment exceeded 90%. Film weight increased with moisture uptake, and DSC analysis indicated the absence of drug crystallinity. Bioadhesion properties and swelling index decreased with increasing drug content. In vitro release demonstrated that drug release depended on the drug-polymer ratio. The in vivo study showed significant improvements in Tmax (from 1.21 ± 0.33 to 0.50 ± 0.0) and Cmax (from 45.29 ± 14.66 to 63.27 ± 24.85) compared to conventional tablets. CONCLUSION: The prepared mucoadhesive buccal films exhibited the desired characteristics and demonstrated enhanced drug absorption, evidenced by the significantly reduced Tmax and increased Cmax compared to conventional tablets. The results indicate the successful achievement of the study objectives in selecting and designing an effective pharmaceutical dosage form. as cm2.

Asunto(s)

RESUMEN

Gastrointestinal mucus plays essential roles in modulating interactions between intestinal lumen contents, including orally delivered drug carriers and the gut microbiome, and underlying epithelial and immune tissues and cells. This review is focused on the properties of and methods for studying native gastrointestinal mucus and its interactions with intestinal lumen contents, including drug delivery systems, drugs, and bacteria. The properties of gastrointestinal mucus important to consider in its analysis are first presented, followed by a discussion of different experimental setups used to study gastrointestinal mucus. Applications of native intestinal mucus are then described, including experimental methods used to study mucus as a barrier to drug delivery and interactions with intestinal lumen contents that impact barrier properties. Given the significance of the microbiota in health and disease, its impact on drug delivery and drug metabolism, and the use of probiotics and microbe-based delivery systems, analysis of interactions of bacteria with native intestinal mucus is then reviewed. Specifically, bacteria adhesion to, motility within, and degradation of mucus is discussed. Literature noted is focused largely on applications of native intestinal mucus models as opposed to isolated mucins or reconstituted mucin gels.

Asunto(s)

RESUMEN

The mucosal drug delivery system (mDDS) is one of the promising approaches to control the pharmacokinetic behavior of drugs. In this approach, surface properties of drug nanoparticles are key determinants to provide particles with mucoadhesive and mucopenetrating properties for prolonged retention at mucosal tissue and rapid mucosal absorption, respectively. In this paper, we would like to discuss the preparation of mDDS formulations by flash nanoprecipitation using a four-inlet multi-inlet vortex mixer, in vitro and ex vivo evaluation of mucopenetrating and mucoadhesive properties of polymeric nanoparticles as well as the application of mDDS to the pharmacokinetic control of cyclosporine A after oral administration to rats. We also share our current research on in silico modeling and prediction of the pharmacokinetic behavior of drugs after intratracheal administration to rats.

Asunto(s)

RESUMEN

As an oral mucosal drug delivery system, oral films have been of wide concern in recent years because of their advantages such as rapid absorption, being easy to swallow and avoiding the first-pass effect common for mucoadhesive oral films. However, the currently utilized manufacturing approaches including solvent casting have many limitations, such as solvent residue and difficulties in drying, and are not suitable for personalized customization. To solve these problems, the present study utilizes liquid crystal display (LCD), a photopolymerization-based 3D printing technique, to fabricate mucoadhesive films for oral mucosal drug delivery. The designed printing formulation includes PEGDA as the printing resin, TPO as the photoinitiator, tartrazine as the photoabsorber, PEG 300 as the additive and HPMC as the bioadhesive material. The influence of printing formulation and printing parameters on the printing formability of the oral films were elucidated in depth, and the results suggested that PEG 300 in the formulation not only provided the necessary flexibility of the printed oral films, but also improved drug release rate due to its role as pore former in the produced films. The presence of HPMC could greatly improve the adhesiveness of the 3D-printed oral films, but excessive HPMC increased the viscosity of the printing resin solution, which could strongly hinder the photo-crosslinking reaction and reduce printability. Based on the optimized printing formulation and printing parameters, the bilayer oral films containing a backing layer and an adhesive layer were successfully printed with stable dimensions, adequate mechanical properties, strong adhesion ability, desirable drug release and efficient in vivo therapeutic efficacy. All these results indicated that an LCD-based 3D printing technique is a promising alternative to precisely fabricate oral films for personalized medicine.

RESUMEN

Polydopamine (PDA) is a biopolymer with unique physicochemical properties, including free-radical scavenging, high photothermal conversion efficiency, biocompatibility, biodegradability, excellent fluorescent and theranostic capacity due to their abundant surface chemistry. Thus, PDA is used for a myriad of applications including drug delivery, biosensing, imaging and cancer therapy. Recent reports present a new functionality of PDA as a coating nanomaterial, with major implications in mucosal drug delivery applications, particularly muco-adhesion and muco-penetration. However, this application has received minimal traction in the literature. In this review, we present the physicochemical and functional properties of PDA and highlight its key biomedical applications, especially in cancer therapy. A detailed presentation of the role of PDA as a promising coating material for nanoparticulate carriers intended for mucosal delivery forms the core aspect of the review. Finally, a reflection on key considerations and challenges in the utilizing PDA for mucosal drug delivery, along with the possibilities of translation to clinical studies is expounded.

Asunto(s)

RESUMEN

In this time of COVID-19 pandemic, the strategies for prevention of the infection are a primary concern. Looking more globally on the subject and acknowledging the high degree of misuse of protective face masks from the population, we focused this review on alternative pharmaceutical developments eligible for self-defense against respiratory infections. In particular, the attention herein is directed to the nasal and oromucosal formulations intended to boost the local immunity, neutralize or mechanically "trap" the pathogens at the site of entry (nose or mouth). The current work presents a critical review of the contemporary methods of immune- and chemoprophylaxis and their suitability and applicability in topical mucosal dosage forms for SARS-CoV-2 prophylaxis.

RESUMEN

The mucous barrier is a major physiological obstacle that the mucosal drug delivery system needs to deal with. In response to this physiological barrier, many achievements have been made in research of mucosal adhesion and mucus penetration. This review puts emphasis on the progress of the research on new mucosal adhesion strategies such as cationization, sulfhydrylization, maleimide functionalization, lectinization and catechol conjugation; polyethylene glycol (PEG), polyvinyl alcohol (PVA), poly (2-alkyl-2-oxazoline) (POZ), zwitterionic polymers and other mucus-inert materials, strategies to enhance mucus penetration ability such as enzyme functionalization, reducing agent pretreatment and so on. The problems of each strategy are also analyzed and discussed, which can provide some references for clinical transformation.

RESUMEN

A drug delivery system for the paranasal sinuses consisting of a freeze-dried thermoresponsive hydrogel with degradable microspheres, called FD-TEMPS (Freeze Dried-Thermogel, Extended-release Microsphere-based delivery to the Paranasal Sinuses), was developed. Glass transition temperatures (Tg') of the maximally freeze concentrated solutions consisting of poly(N-isopropylacrylamide) (pNIPAAm) and polyethylene glycol (PEG) were determined by differential scanning calorimetry, which informed optimization of the thermogel formulation. By replacing low molecular weight (MW) PEG (200 Da) with a higher MW PEG (2000 Da), the resulting freeze-dried gel exhibited a brittle texture, porous structure, and low residual moisture (< 3% measured by thermal gravimetric analysis). When combined with poly(lactic-co-glycolic acid) microspheres (PLGA MSs) and freeze dried, the complete system (FD-TEMPS) exhibited enhanced shelf-stability. Specifically, the smooth, spherical morphology of the MSs and initial release kinetics were maintained following 6 weeks of storage under ambient conditions. Furthermore, FD-TEMPS remained in place after application to a simulated mucosal surface, suggesting that it could be more uniformly distributed along the sinonasal mucosa in vivo. Freeze drying enables this delivery system to be stored as a ready-to-use product for better ease of clinical translation without compromising the thermoresponsive or sustained release characteristics that would enable local delivery of therapeutics to the sinonasal mucosa.

Asunto(s)

RESUMEN

Oral drug delivery is often challenged with enzymatic degradation of drug molecules in the gastrointestinal tract and high first-pass metabolism, resulting in low bioavailability. Delivery of drug molecules via the oral cavity mucosa is considered a viable option to enhance bioavailability. One of the relatively new dosage forms for transmucosal drug delivery is the oral thin film (OTF) with mucoadhesive properties that offers several advantages over conventional dosage forms, including faster dissolution, higher patient compliance, and extended oral retention by reduced salivary washout. Mucoadhesive OTFs should have sufficient muco-adhesiveness as well as suitable mechanical properties for their best performance, thus such characterization is critical in the successful design and development of OTFs. However, there is currently no FDA or USP-recommended analytical procedure or standard available for evaluating adhesiveness and mechanical properties of mucoadhesive OTFs. Therefore, we aimed to develop a fast and reliable in vitro method capable of differentiating various OTFs in terms of their adhesive strengths using a texture analyzer. We found that an in vitro gel substrate composed of 4% w/v gellan gum and 2% w/v glycerin could be used to discriminate between the adhesive features of the tested film samples. Also, our studies show that the adhesion test parameters of 0.96 N target force, probe speed of 0.1 mm/s, holding time of 15 s, and conditioning medium volume of 200 µL while using the said substrate could successfully differentiate between the adhesion strength of the OTF samples. We further examined the film samples for their physicomechanical properties to obtain a tangible and practical range of mechanical values for pharmaceutical OTFs using the puncture test and folding endurance test. We found a breaking factor above 34.5 N/mm, elongation to puncture less than 5.55% and folding endurance of at least 50 folds can be used as a starting point when designing and manufacturing OTFs.

Asunto(s)

RESUMEN

The current clinical goal for managing chronic rhinosinusitis (CRS), a heterogenous disease of the paranasal sinuses, is to control inflammation, yet adjunct therapies that promote mucosal regeneration can improve the long-term health of the upper airways. The small natural openings to the sinuses, however, limit the efficacy of traditional drug delivery methods (i.e., nasal sprays and irrigation). Accordingly, a conformable thermoresponsive and controlled release system ("TEMPS", Thermogel, Extended-release Microsphere-based delivery to the Paranasal Sinuses) is developed. The poly(lactic-co-glycolic acid) microsphere component enables the encapsulation of numerous therapeutics, such as retinoic acid (RA), an analog of vitamin A (VA). Studies in CRS patients and preclinical models have shown that aqueous RA or VA gels promoted the differentiation of ciliated cells and improved mucosal healing following repeat applications. In the present study, TEMPS is designed for the controlled release of RA such that a single dose of RA-TEMPS delivers bioactive drug for at least 30 days. Furthermore, as TEMPS will be in direct contact with sinonasal tissue, its compatibility with ciliated human nasal epithelium is explored. After ex vivo incubation in thermogel for 24 h, cilia motility is maintained, providing evidence that TEMPS can be compatible for application along the sinonasal epithelium.

Asunto(s)

RESUMEN

In the last decade, additive manufacturing (AM) technologies have revolutionized how healthcare provision is envisioned. The rapid evolution of these technologies has already created a momentum in the effort to address unmet personalized needs in large patient groups, especially those belonging to sensitive subgroup populations (e.g., paediatric, geriatric, visually impaired). At the same time, AM technologies have become a salient ally to overcome defined health challenges in drug formulation development by addressing not only the requirement of personalized therapy, but also problems related to lowering non-specific drug distribution and the risk of adverse reactions, enhancing drug absorption and bioavailability, as well as ease of administration and patient compliance. To this end, mucoadhesive drug delivery systems fabricated with the support of AM technologies provide competitive advantages over conventional dosage forms, aiming to entice innovation in drug formulation with special focus on sensitive patient populations.

Asunto(s)

RESUMEN

Permeation assays are important for the development of topical formulations applied on buccal mucosa. Swine buccal and esophageal epithelia are usually used as barriers for these assays, while frozen epithelia have been used to optimize the experimental setup. However, there is no consensus on these methods. In transdermal studies, barrier integrity has been evaluated by measuring electrical resistance (ER) across the skin, which has been demonstrated to be a simple, fast, safe, and cost-effective method. Therefore, the aims here were to investigate whether ER might also be an effective method to evaluate buccal and esophageal epithelium mucosa integrity for in vitro permeation studies, and to establish a cut-off ER value for each epithelium mucosa model. We further investigated whether buccal epithelium could be substituted by esophageal epithelium in transbuccal permeation studies, and whether their permeability and integrity were affected by freezing at -20 °C for 3 weeks. Fresh and frozen swine buccal and esophageal epithelia were mounted in Franz diffusion cells and were then submitted to ER measurement. Permeation assays were performed using lidocaine hydrochloride as a hydrophilic drug model. ER was shown to be a reliable method for evaluating esophageal and buccal epithelia. The esophageal epithelium presented higher permeability compared to the buccal epithelium. For both epithelia, freezing and storage led to decreased electrical resistivity and increased permeability. We conclude that ER may be safely used to confirm tissue integrity when it is equal to or above 3 kΩ for fresh esophageal mucosa, but not for buccal epithelium mucosa. However, the use of esophageal epithelium in in vitro transmucosal studies could overestimate the absorption of hydrophilic drugs. In addition, fresh samples are recommended for these experiments, especially when hydrophilic drugs are involved.

RESUMEN

We aim to prepare a size-shifting nanocarrier for site-targeting mucosal drug delivery that can penetrate through mucus gel layer and remain close to the absorption membrane. As nanocarriers can be engineered to penetrate mucus but they can also back diffuse into outer mucus regions, a size shifting to micron range once they have reached the absorption membrane would prevent back-diffusion effect and extend drug release over a long period of time. For this purpose, we loaded solid lipid nanoparticles (SLN) with a phosphate ester surfactant and octadecylamine. Alkaline phosphatase (AP), a membrane bound enzyme was for the first time utilized as an in situ partner for triggering the size conversion at epithelial cell surface. Having the size of ~120 nm, SLN with hydrophilic and phosphate-decorated shells were shown to penetrate through mucus gel and form aggregates above cell layer surface. Aggregates of 5-8 µm were formed due to interparticle interactions induced by enzymatic phosphate removal after ~30 min in contact with isolated AP. The developed SLN system could be a potential tool for mucosal drug delivery to AP-expressing tissues like colon, lung, cervix, vagina and some mucus-secreting tumors.

Asunto(s)

RESUMEN

Mucosal surfaces pose a challenging environment for efficient drug delivery. Various delivery strategies such as nanoparticles have been employed so far; yet, still yielding limited success. To address the need of efficient transmucosal drug delivery, this report presents the synthesis of novel disulfide-containing dendritic polyglycerol (dPG)-based nanogels and their preclinical testing. A bifunctional disulfide-containing linker is coupled to dPG to act as a macromolecular crosslinker for poly-N-isopropylacrylamide (PNIPAM) and poly-N-isopropylmethacrylamide (PNIPMAM) in a precipitation polymerization process. A systematic analysis of the polymerization reveals the importance of a careful polymer choice to yield mucus-degradable nanogels with diameters between 100 and 200 nm, low polydispersity, and intact disulfide linkers. Absorption studies in porcine intestinal tissue and human bronchial epithelial models demonstrate that disulfide-containing nanogels are highly efficient in overcoming mucosal barriers. The nanogels efficiently degrade and deliver the anti-inflammatory biomacromolecule etanercept into epithelial tissues yielding local anti-inflammatory effects. Over the course of this work, several problems are encountered due to a limited availability of valid test systems for mucosal drug-delivery systems. Hence, this study also emphasizes how critical a combined and multifaceted approach is for the preclinical testing of mucosal drug-delivery systems, discusses potential pitfalls, and provides suggestions for solutions.

Asunto(s)

RESUMEN

The mucus covering of epithelial tissues presents one significant biological barrier to the uptake and absorption of particulate carriers. Improved understanding of the mechanisms mediating the transport of nanoparticles across such mucus layers would accelerate their development as optimised mucosal drug delivery formulations (e.g. via oral and rectal routes). Herein, an in vitro mucus model ("Mucus-on-Chip") was developed to enable the interaction and transport of functionalised nanoparticles and reconstituted mucus to be quantitatively investigated in real-time. We verified that the diffusion of nanoparticles into mucus is highly dependent on their biointerfacial properties. Muco-inert modification (PEGylation) significantly enhanced the mucopenetration of 50 nm and 200 nm nanoparticles, whereas limited mucopenetration was observed for pectin coated mucoadhesive nanoparticles. Furthermore, this model can be easily adapted to mimic specific physiological mucus environments. Mucus pre-treated with a mucolytic agent displayed reduced barrier function and therefore significantly accelerated mucopenetration of nanoparticles, which was independent of their size and biointerfacial properties. This new "Mucus-on-Chip" methodology provides detailed insight into the dynamics of nanoparticle-mucus interaction, which can be applied to refine the design of particulate formulations for more efficient mucosal drug delivery.

Asunto(s)

RESUMEN

Background: Oral candidiasis is widespread in the patients with immunodeficiency diseases. Chewing gums are considered as mobile drug delivery systems that affected locally or systemically via the oral cavity. This study aimed to develop and evaluate the formulation of clotrimazole chewing gums for patients having oral candidiasis. Materials and Methods: Fourteen formulations (F) were designed by Design-Expert, version 7. These formulations were different in the amount of gum bases and sweeteners. Gum bases of elvasti, 487, stick and fruit C were heated up to 70°C. Clotrimazole powder, sugar, liquid glucose, glycerin, mannitol, xylitol, and maltitol as well as different flavoring agents were added to the gum bases at 40°C. Content and weight uniformity, organoleptic properties evaluation, releasing the active ingredient in the phosphate buffer pH, 6.8 and taste evaluation were analyzed by Latin square analysis. Also, the mechanical test was done on F13 and F14 formulations. Results: F14 was the best formulation in terms of organoleptic properties. This formulation had suitable size, hardness, softness, and lack of adhesion to teeth. F14 formulation released 89% and 97% of clotrimazole after 30 and 45 minutes, respectively. F14 content uniformity and weight variations were 9.83±0.086 mg and 1.14±0.09 g, respectively. F14 evaluation of mechanical properties showed Young's modulus about 0.32 MPa, and yield point occurred at the stress of 0.599 MPa and strain of 4.1%. Conclusion: F14 was chosen according to its physicochemical and organoleptic properties. F14 had adequate hardness, lack of adhesion to the teeth, suitable size, and best drug release. Tutti Frutti was a proper flavoring agent for clotrimazole gum formulations.