RESUMEN

Introduction: Temporary Anchorage Devices have revolutionized our approach to anchorage management. However, their placement may carry risks, such as root perforation, damage to the periodontal ligament, buccal-nasal communication, etc. The aim of this article is to describe an original protocol in two times for the placement of a palatal mini-screw through guided surgery using a guide created by Computer-Aided Design and Manufacturing (CAD/CAM) followed by the transfer of placement information to the laboratory for the fabrication of a Custom Medical Device (CMD) for distalization. Materials and Methods: A two-stage protocol is described and illustrated step by step. Phase 1 comprises 7 steps (including superimposition of maxillary cast and profile teleradiography, surgical tray design), followed by phase 2, which involves 3 final steps (including production of impression for laboratory, production of laboratory model with transfer of mini-screw position). Results: Although the position of the mini screws remains precise, a discrepancy between the planning and the intraoral situation exists. The addition of a second step therefore enables the distalization appliance to be fitted precisely and without pitfalls. Finally, this protocol ensures safe placement, making work easier for the practitioner and, ultimately, for the patient. Conclusion: In a two-stage process, the placement of palatal mini screws through guided surgery using a guide created by CAD/CAM followed by the transfer of this information to the laboratory for the fabrication of a CMD for distalization proves to be a relevant approach.

Introduction: Les dispositifs d'ancrage temporaires ont révolutionné notre vision de la gestion de l'ancrage. En revanche, leur mise en place peut comporter certains risques (perforation radiculaire, communication bucco-nasale, lésions vasculaires…). Cet article vise à décrire un protocole original, en deux temps, de pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par conception et fabrication assistée par ordinateur (CFAO) in-office suivie du transfert des informations de pose au laboratoire pour la confection d'un appareil de distalisation. Matériel et méthodes: Un protocole en deux temps est décrit pas à pas. Le temps 1 comprend sept étapes (dont le placement virtuel des mini-vis et la création de la gouttière chirurgicale), suivi du temps 2 qui implique trois étapes (dont la réalisation de l'empreinte pour le laboratoire et l'élaboration du modèle de laboratoire avec transfert de la position des mini-vis). Résultats: Bien que la pose puisse être considérée comme précise, une différence existe entre la planification et la situation clinique. L'apport d'un second temps améliore l'adaptation de l'appareil de distalisation. Enfin, ce protocole offre une pose sécurisée et apporte ainsi un confort de travail pour le praticien et, in fine, pour le patient. Conclusion: Réalisée en deux temps, la pose de mini-vis palatine par chirurgie guidée à l'aide d'un guide réalisé par CFAO in-office suivie du transfert de cette information au laboratoire pour la confection d'un appareil de distalisation s'avère être une approche pertinente.

Asunto(s)

RESUMEN

BACKGROUND: The infrazygomatic crest mini-screw has been widely used, but the biomechanical performance of mini-screws at different insertion angles is still uncertain. The aim of this study was to analyse the primary stability of infrazygomatic crest mini-screws at different angles and to explore the effects of the exposure length (EL), screw-cortical bone contact area (SCA), and screw-trabecular bone contact area (STA) on this primary stability. METHODS: Ninety synthetic bones were assigned to nine groups to insert mini-screws at the cross-combined angles in the occlusogingival and mesiodistal directions. SCA, STA, EL, and lateral pull-out strength (LPS) were measured, and their relationships were analysed. Twelve mini-screws were then inserted at the optimal and poor angulations into the maxillae from six fresh cadaver heads, and the same biomechanical metrics were measured for validation. RESULTS: In the synthetic-bone test, the LPS, SCA, STA, and EL had significant correlations with the angle in the occlusogingival direction (rLPS = 0.886, rSCA = -0.946, rSTA = 0.911, and rEL= -0.731; all P < 0.001). In the cadaver-validation test, significant differences were noted in the LPS (P = 0.011), SCA (P = 0.020), STA (P = 0.004), and EL (P = 0.001) between the poor and optimal angulations in the occlusogingival direction. The STA had positive correlations with LPS (rs = 0.245 [synthetic-bone test] and r = 0.720 [cadaver-validation test]; both P < 0.05). CONCLUSIONS: The primary stability of the infrazygomatic crest mini-screw was correlated with occlusogingival angulations. The STA significantly affected the primary stability of the infrazygomatic crest mini-screw, but the SCA and EL did not.

Asunto(s)

RESUMEN

Anterior open bite (AOB), characterized by the lack of vertical overlap between upper and lower anterior teeth, poses a considerable challenge in orthodontics. The condition depends on many factors that combine to render it difficult to achieve post treatment stability. AOB is commonly classified as dental, skeletal, or functional on the basis of the clinical presentation and causative factors. Traditionally, skeletal AOB necessitates surgical intervention, whereas nonsurgical approaches such as extrusion arches and the Multiloop Edgewise Archwire Technique (MEAW) can be employed in more straightforward cases. Functional appliances are reserved for situations in which a patient's growth potential offers the possibility of effectively addressing AOB. This review presents a strategic treatment approach for addressing AOB, taking into account the classification and severity of the condition. The proposed SHE framework describes the use of mini-screws (S) for anchorage and vertical control, encouragement to correct habits (H), and the utilization of extractions and elastics (E). By incorporating extra-radicular mini-screws, AOB closure is achieved through anterior retraction in extraction cases or whole arch distalization of dentition with elastics in non-extraction cases. This framework emphasizes habit correction through a regimen of oral myofunctional therapy (OMT) and habit-correcting appliances to enhance posttreatment stability. This review suggests that nonsurgical correction is viable in the majority of cases, whereas surgical intervention should be reserved for severe cases of skeletal vertical overgrowth or horizontal discrepancies.

RESUMEN

The primary cause of complex AOB malocclusion is typically a combination of dental, skeletal, functional, and habitual factors. Open bite correction is a challenging treatment due to its complexity and the requirement for long-term stability, therefore, multidisciplinary treatment is often the best option for achieving stable esthetic outcomes.

RESUMEN

Background: We investigated treatment outcomes and post-treatment stability in 10 patients with an anterior open bite and nonsurgical orthodontics. Methods: The patients underwent maxillary molar intrusion using temporary anchorage devices (TADs) to deepen the overbite due to mandibular autorotation. Lateral cephalograms and dental cast models were obtained before treatment (T0), immediately after it (T1), and >1 year after it (T2). Skeletal and dental cephalometric changes and three-dimensional movements of the maxillary dentitions were evaluated. Results: At T0, cephalometric analysis indicated that patients had skeletal class I with tendencies for a class II jaw relationship and a skeletal open bite. During active treatment (T0 to T1), the maxillary first molar intruded by 1.6 mm, the mandibular first molar extruded by 0.3 mm, the Frankfort-mandibular plane angle decreased by 1.1°, and the overbite increased by 4.1 mm. Statistically significant changes were observed in the amount of vertical movement of the maxillary first molar, Frankfort-mandibular plane angle, and overbite. Three-dimensional (3D) dental cast analysis revealed that the maxillary first and second molars intruded, whereas the anterior teeth extruded, with the second premolar as an infection point. In addition, the maxillary molar was tipped distally by 2.9° and rotated distally by 0.91°. Statistically significant changes were observed in the amount of vertical movement of the central incisor, lateral incisor, canine and first molar, and molar angulation. From T1 to T2, no significant changes in cephalometric measurements or the 3D position of the maxillary dentition were observed. The maxillary and mandibular dentitions did not significantly change during post-treatment follow-up. Conclusions: Maxillary molar intrusion using mini-screws is an effective treatment for open bite correction, with the achieved occlusion demonstrating 3D stability at least 1 year after treatment.

RESUMEN

BACKGROUND: The aim of the investigation was to evaluate if a Class II malocclusion in adult patients can be successfully corrected by maxillary total arch distalization with interradicular mini-screws in combination with completely customized lingual appliances (CCLA). METHODS: Two patient groups were matched for age and gender to determine differences in the quality of final treatment outcome. The treatment results of 40 adult patients with a Class I malocclusion (Group 1) were compared with those of 40 adult patients with a moderate to severe Class II malocclusion (Group 2). All patients had completed treatment with a CCLA (WIN, DW Lingual Systems, Bad Essen, Germany) without overcorrection in the individual treatment plan defined by a target set-up. To compare the treatment results of the two groups, 7 measurements using the American Board of Orthodontics Model Grading System (ABO MGS) and linear measurements for anterior-posterior (AP) and vertical dimensions were assessed at the start of lingual treatment (T1), after debonding (T2B), and compared to the individual target set-up (T2A). RESULTS: A statistically significant AP correction (mean 4.5 mm, min/max 2.1/8.6, SD 1.09) was achieved in Group 2, representing 99% of the planned amount. The planned overbite correction was fully achieved in both the Class I and Class II groups. There was a statistically significant improvement in the ABO scores in both groups (Group 1: 39.4 to 17.7, Group 2: 55.8 to 17.1), with no significant difference between the two groups at T2B. 95% of the adult patients in Group 1 and 95% in Group 2 would meet the ABO standards after maxillary total arch distalization with a CCLA and interradicular mini-screws. CONCLUSIONS: CCLAs in combination with interradicular mini-screws for maxillary total arch distalization can successfully correct moderate to severe Class II malocclusions in adult patients. The quality of the final occlusal outcome is high and the amount of the sagittal correction can be predicted by the individual target set-up.

Asunto(s)

RESUMEN

Background Monocortical mini-screw-type temporary anchorage devices (TADs), or mini-screws, have significantly impacted orthodontic treatment strategies, especially in severe crowding and protrusion cases. These devices offer flexibility in placement sites, but the chosen location can considerably influence tooth displacement patterns. Key factors include the 'line of force' and the biomechanical properties of orthodontic tools. By analyzing tension distribution and three-dimensional displacements, the finite element method (FEM) provides a thorough means to comprehend these patterns. The Curve of Spee (COS) is a crucial factor potentially affecting displacement. Objective This study aimed to leverage finite element analysis (FEA) to understand the impact of varying mini-implant heights (10 mm, 13 mm, and 16 mm) on the displacements of different tooth types under a consistent force of 150 gm and compare these displacements both in the presence and absence of the COS. Materials and methods A CAD model of the jaw and teeth was developed using CT scan data and a Rexcan III 3D White Light Scanner. This model was meshed in Altair HyperMesh using tetrahedral elements, resulting in a Finite Element Model. The model incorporated various components, including teeth, the periodontal ligament (PDL), alveolar bone, brackets, a titanium mini-screw, and an archwire measuring 0.019 x 0.025 inches. Unique material properties were assigned to the PDL, and the assembly accurately replicated the clinical alignment of the archwire and brackets. Subsequently, stress and strain analyses were conducted on the model using the FEM. Results The displacement patterns of various teeth at implant heights of 10 mm, 13 mm, and 16 mm under a 150-gm force were analyzed in relation to the COS. Notably, for the central incisor, the COS significantly affected displacements in the Y and Z directions. Similarly, the Lateral Incisor and Canine exhibited marked changes in the Z direction with the presence of the COS. The Second Premolar's apex displacement showed significant variation due to the COS, while the First Molar displayed notable changes in the X direction. Generally, the presence of the COS either maintained or slightly increased Z-directional displacements across teeth, particularly at the apices. Conclusion The presence of COS significantly influences tooth displacement patterns when using mini-screws at different implant heights. Central incisors, lateral incisors, and canines are particularly sensitive to changes in the Z direction with the COS. The biomechanical analysis emphasizes the importance of considering COS in treatment planning for optimal results with mini-implants in orthodontics.

RESUMEN

INTRODUCTION: In the majority of orthodontic premolar extraction cases, the canine retraction phase is the most laborious procedure. This randomized clinical trial aimed to assess the effect of single versus repeated micro-osteoperforations (MOPs) during orthodontic canine retraction. METHODS: In this split-mouth study, two equal groups of 18 patients who required maxillary first premolar extractions and fixed orthodontic therapy were randomly assigned (n=9). In Group I, MOPs were only performed once on one site before retraction, whereas in Group II, MOPs were performed on one site repeatedly once a month for four months. In both groups, the contralateral control sites received no MOPs. The canines were retracted using mini-screws and closed-coil nickel-titanium springs. Using the patients' 3D models, the primary outcome measure at four months was the amount of orthodontic canine distal movement. The amount of anchorage loss (AL), degree of molar rotation (MR) and canine rotation (CR), and degree of canine tipping (CT) were measured as the secondary outcomes. The comparison of mean changes in the primary and secondary outcomes between the groups was done using the independent sample t-test (p<0.05). RESULTS: The rate of canine retraction, degree of CT, and rotation were not significantly different between the two groups (p>0.05). Additionally, there were no statistically significant variations in the maxillary first MR and the degree of AL (p>0.05). CONCLUSIONS: When maxillary canine retraction was performed with a single and repeated regimen of MOPs, comparable levels of distal CR and tipping were observed, along with an identical minimal degree of MR and AL.

RESUMEN

INTRODUCTION: Detailed insight regarding the use of temporary anchorage devices (TAD) in Australia and the United Kingdom (UK) is lacking. The primary aim of the present cross-sectional survey was to investigate TAD usage among UK-based and Australian-based orthodontists. The secondary objectives were to compare TAD-related preferences and protocols between orthodontists in the two countries. METHODS: A pilot-tested electronic questionnaire was distributed to members of the British Orthodontic Society and the Australian Society of Orthodontists. Questions pertained to their demographic details, and current use of TADs including protocols, treatment objectives and factors influencing their use. RESULTS: A total of 192 responses were recorded (Australia: 122; UK: 70). One hundred and forty-two respondents (74.0%) reported using TADs as part of their orthodontic treatment, 77.0% in Australia (n=94) and 68.6% in the UK (n=48). Molar protraction was the most common procedure for which TADs were reportedly used (Australia: n=118; 87.2%, UK: n=36; 75.0%). "Loosening" was the most prevalent reported complication overall (n=124; 90.1%). "Confidence", "insufficient postgraduate education" and "availability of equipment" were the factors that most influenced the decision not to provide TADs. CONCLUSIONS: Most orthodontists in both countries provided TADs. TAD protocols of orthodontists in both countries were reported. Similarities and differences regarding TAD-related clinical practices and procedures, complications and factors influencing the use of TADs and reasons for not using TADs were explored. Information from the present study can provide baseline data for future related studies in each country and for comparison of TAD usage in other countries.

Asunto(s)

RESUMEN

AIM: The purpose of this study was to evaluate the effect of the density and the thickness of the cortical and the cancellous bone at selected inter-radicular areas in subjects with different facial growth patterns using cone beam computed tomography (CBCT) in order to choose the optimal area for miniscrew insertion. MATERIALS AND METHODS: From 150 CBCT scans, 45 scans were included in the study. The subjects were categorized into three groups based on their skeletal growth pattern according to SN-GoMe angle and facial height index. Cortical and cancellous bone density and thickness were measured at the selected inter-radicular areas. RESULTS: Compared to the other two groups, the hyperdivergent group had thinner cortical bone in the anterior region of the maxilla between the central and the lateral incisors on the buccal side at 4 mm from the alveolar crest (P-value: 0.012) and on the palatal side at 7 mm from the alveolar crest (P-value: 0.030). Cancellous bone density values in these areas were higher in subjects with hypodivergent and hyperdivergent growth pattern. Furthermore, in hyperdivergent group less dense cortical bone in the posterior region of the maxilla on the palatal side between the second premolar and the first molar (p-value: 0.020) and on the buccal side between the first molar and the second molar (p-value: 0.038 & 0.047) was observed. No significant differences were found in the mandible between the three groups. No significant differences were found between the male and the female subjects. CONCLUSION: Hyperdivegents presented thinner cortical bone in the anterior of the maxilla between the central and the lateral incisors. Less dense cortical bone was found between maxillary second premolar and first molar on the palatal side and also between the maxillary first molar and the second molar on the buccal side in this group too. Normal showed higher density values in the posterior of the maxilla compared to the other two groups. No significant differences were found among three groups in mandible.

Asunto(s)

RESUMEN

OBJECTIVE: This study aimed to assess the levels of pain, discomfort, and functional impairment associated with the en-masse retraction of the upper anterior teeth when treating Class II division 1 malocclusion patients using traditional corticotomy or flapless corticotomy. In addition, an assessment of patients' satisfaction with the selected surgical intervention was undertaken at one-month post-operatively. MATERIALS AND METHODS: The study sample comprised 40 patients with Class II division 1 malocclusion, randomly assigned to either the traditional corticotomy group (n=20) or the flapless corticotomy group (n=20). Patients underwent extraction of the maxillary first premolars, and orthodontic mini-screws were placed between the maxillary second premolars and the first molars for skeletal anchorage. An en-masse retraction was accomplished in both groups. Patients were asked to fill in a questionnaire at 24 hours (T1), four days (T2), seven days (T3), 14 days (T4), and 28 days (T5) after the surgical intervention using standardized questionnaires. Most questions were answered on a visual analog scale where zero scores meant the absence of pain, discomfort, or functional impairment, and 100 scores meant the worst feelings of these traits. RESULTS: All patients in both groups entered data analysis with no dropouts. All measured levels were significantly greater in the traditional corticotomy group during the first two weeks following the corticotomy intervention in terms of pain perception (P˂0.001), discomfort (P=0.004), and difficulty in chewing (P=0.015). Additionally, during the first week following corticotomy, levels of perception of discomfort (P˂0.001), difficulty in swallowing (P=0.001), and limitation of jaw movement (P˂0.001) were significantly greater in the traditional corticotomy group. Patient satisfaction, the recommendation to a friend, and acceptance of flapless corticotomy were significantly greater than traditional corticotomy (P=0.002, P=0.001, respectively). 78% of patients in the traditional corticotomy group considered it more discomfort than a tooth extraction, while 50% of patients in the flapless corticotomy group considered tooth extraction more discomfort, with a significant difference between the two groups (P=0.001). CONCLUSIONS: The levels of negative patients' reported outcomes were significantly smaller with flapless corticotomy than with traditional corticotomy. Traditional corticotomy was associated with mild to moderate levels of pain, swallowing difficulty, moderate levels of discomfort, chewing difficulty, and jaw movement limitation after 24 hours of the surgical procedure. In contrast, flapless corticotomy was less problematic and associated with mild pain, swelling, chewing difficulty, jaw movement limitation, and swallowing difficulty at the same assessment time. Patient satisfaction, acceptance, and recommendation to a friend were greater for flapless corticotomy than traditional intervention.

RESUMEN

OBJECTIVE: The aim of the study. To improve the effectiveness of patients' treatment with narrow upper jaw by improving the stability of intraosseous devices. MATERIALS AND METHODS: 40 patients with the narrow upper jaw, from 12 to 40 years old, were treated. 50 self-drilling orthodontic miniscrews of each manufacturer, i.e. «BioRay¼, Taiwan, «Turbo¼, Russia, a total of 100 items, were inserted into a palate. RESULTS: The greatest thickness of the cortical bone relative to the sagittal plane was observed at a distance of 6 mm from the incisor canal, which averages 6.32 mm. Relative to the transversal plane, the greatest bone thickness was observed 3 mm laterally from the median palatine suture and averages 7.62 mm. The smallest thickness of the mucous membrane of the hard palate is noted 6 mm distal from the incisor canal and 3 mm laterally from the palatine suture is on average 4.56 mm. CONCLUSION: The protocol for determining the individual position of the miniscrew for each patient, taking into account all his anatomical features, is a necessary tool for clinical success.

Asunto(s)

RESUMEN

INTRODUCTION: The aim of this study was to compare the primary stability of mini-screws with different surface treatments such as resorbable blasting media (RBM) and micro-arc oxidation (MAO) under in vitro orthodontic forces. MATERIAL AND METHODS: Thirty-six self-drilling TiAl6V4-ELI grade 23 titanium alloy 1.6×8mm mini-screws were inserted into polyurethane foam blocks and divided into three groups according to surface properties: machine surface (MS), RBM-treated, and MAO-treated. An orthodontic force of 150g was applied to the mini-screws using NiTi coils. Maximum insertion torque (MIT) and maximum removal torque (MRT) were measured with a digital torque screwdriver during insertion and removal. For each mini-screw, stability measurements were made with the Periotest M device at day 0 and weeks 1, 2, 4, 8, and 12. RESULTS: Significant differences in MIT were observed between all groups in pairwise comparisons (P<0.001) with the highest value in the MAO-treated group and the lowest in the MS group. The mean MRT values differed in all three groups (P=0.001). In pairwise comparisons of MRT, only the difference between MS group and RBM-treated group was significant. The highest value was observed in the RBM-treated group, while the lowest value was observed in the MS group. Periotest values were significantly higher in the MAO-treated group than the RBM-treated group at weeks 8 and 12. A positive significant correlation was found between MIT and MRT in all groups. No significant correlation was found between MIT, MRT and Periotest values in all groups. CONCLUSION: RBM-treated group was significantly higher than the MS group in MIT and MRT values. According to Periotest values, RBM-treated group was found to be significantly more stable than the MAO-treated group at weeks 8 and 12. Therefore, RBM surface treatment was found to be more favourable than other surfaces to increase success rate in clinical applications.

Asunto(s)

RESUMEN

This study investigated the effects of photobiomodulation (PBM) in acceleration of orthodontic movement of inferior molar uprighting movement. Thirty-four individuals, with indication of molar uprighting movement for oral rehabilitation, were randomly divided in two groups: verticalization + PBM (808 nm, 100 mW, 1 J per point, 10 points and 25 J/cm2 ) or verticalization + PBM simulation. Elastomeric chain ligatures were changed every 30 days for 3 months. FBM was performed immediately, 24 h, 72 h, 1 and 2 months after activation. The primary outcome was the amount of uprighting movement. Secondary outcomes were pain, amount of medication, OHIP-14 questionnaire, and cytokine IL-1ß. PBM group increase uprighting movement when compared to control after 3 months and modulate IL-1ß expression. For pain control, the amount of medication and OHIP-14 no difference were found. This study suggests that PBM accelerates tooth movement during molar uprighting, due to modulation of IL-1ß during bone remodeling.

Asunto(s)

RESUMEN

Introduction: In orthodontics, we need to solve very diverse clinical situations. Classical situations for which the treatment plan will be, with experience, quite quickly carried out. More complex clinical situations for which we are led to think differently. Sometimes, we must modify a treatment plan along the way because unforeseen factors make our original goals unattainable. Faced with these atypical situations, the choice of anchorage arises with even more acuity. Methods: Through the presentation of two atypical treatment cases, we will discuss the development of the treatment plan, the alternatives, and the choice of anchorage. Conclusion: In recent years, the advent of mini screws and other bone anchorages have widened the range of possibilities. If, at first glance, conventional anchorage systems might seem to belong to 20th century orthodontics, we believe that they remain an option to consider when establishing even atypical treatment plans, as much for their contribution on the functional and aesthetic level as on the level of the patient journey.

Introduction: En orthodontie, nous sommes conduits à résoudre des situations cliniques très diverses. Pour les plus classiques, l'élaboration du plan de traitement s'effectuera, avec l'expérience, assez rapidement. Pour les plus complexes, nous sommes amenés à réfléchir autrement. Parfois, nous sommes contraints de réviser, en cours de route, un plan de traitement parce que des facteurs imprévus rendent nos objectifs initiaux inaccessibles. Face à ces situations atypiques, le choix de l'ancrage se pose avec beaucoup d'acuité. Méthodes: Au travers de la présentation de deux cas de traitement atypiques, nous discuterons de l'élaboration du plan de traitement, des alternatives et du choix de l'ancrage. Conclusion: Ces dernières années, l'avènement des ancrages osseux a élargi notre périmètre d'action. Si, de prime abord, les systèmes d'ancrage conventionnels peuvent sembler appartenir à l'orthodontie du 20e siècle, nous pensons qu'ils demeurent une option à considérer lors de l'établissement de plans de traitement mêmes atypiques, tout autant pour leur apport sur le plan fonctionnel et esthétique que sur le plan du parcours de notre patient au cabinet.

Asunto(s)

RESUMEN

La ausencia de un diente puede originar sobre-erupción de su antagonista debido al movimiento fisiológico. Distintos métodos se han empleado para lograr la rehabilitación en espacios interoclusales reducidos, la mayoría implica un tallado del diente antagonista o incluso la extracción dental. La intrusión dental periodontalmente asistida (corticotomía), es una alternativa terapéutica en la que el tallado del diente extruido ya no es necesario, conservando su integridad coronaria. Reporte de caso: Paciente femenino de 56 años con ausencia del 4.7, además presenta sobre-erupción del 1.7, limitando el espacio interoclusal y su rehabilitación. Se realizó intrusión del 1.7 mediante corticotomía con el Piezoeléctrico (técnica Piezocision) así como la colocación de minitornillos de ortodoncia para anclaje. Obtenido dicho espacio interoclusal, se rehabilitó con un implante dental. Conclusiones: La intrusión de molares con el apoyo de mini-implantes y corticotomías es un procedimiento que tiene como beneficio la creación de un espacio interoclusal para su restauración en un periodo corto de tiempo, sin tallar la estructura dentaria.

The absence of a tooth can cause over-eruption of its antagonist due to a physiological movement. Different methods have been used to achieve rehabilitation in reduced interocclusal spaces. Most of them involve the wear of the opposing tooth or even dental extraction. Periodontal-assisted dental intrusion is a therapeutic alternative that does not require the reduction of the extruded tooth and preserves its structure. Case report: 56-year-old female patient with absence of tooth 4.7, also presenting an over-eruption of 1.7, limiting the interocclusal space and rehabilitation. Intrusion of tooth 1.7 was performed with corticotomy using the piezocision technique and placement of mini-screws followed by the placement of a dental implant. Conclusions: The intrusion of molars aided by orthodontic mini-screws and piezocision technique is an effective treatment, whose benefit is the creation of an ideal prosthetic space in a short period of time, avoiding the reduction of dental structure.

Asunto(s)

RESUMEN

An increasing number of clinicians have been utilising orthodontic mini-screws as temporary anchorage devices (TAD) in their practices, but variable successful rates have been reported. Here, we introduce a practical approach to inserting mini-screws successfully. Using computer-aided design (CAD) and computer-aided manufacturing (CAM) technology, the surgical guide for pre-drilling was designed and fabricated and mini-screws were placed following pre-drilling holes in two cases. Two Ø2.0 × 10.0-mm mini-screws were inserted into the prepared holes in the mandibular buccal shelf (MBS) on both sides with a hand driver to distalise the lower molars for Class III correction. The treatment was done successfully, after 12 months of treatment in one case. Two Ø1.6 × 8.0-mm mini-screws were inserted into the prepared holes in the mandibular alveolar process in another case with congenital absence of lower right second premolar. One mini-screw was in the buccal alveolar process between the mandibular right canine and first premolar and the other in the lingual alveolar process between the mandibular right first premolar and second primary molar. The lower right molars would be protracted to close the space left after the extraction of the primary molar using the two mini-screws. The case was still in treatment.

Asunto(s)

RESUMEN

This case report describes a complex full-step class II malocclusion with unilateral upper lateral incisor agenesis in an adult patient treated with lingual straight-wire appliance and premolar extraction, with the two-fold aim of obtaining ideal occlusal relationship and smile aesthetic improvement. In view of this, it underlines how an appropriate treatment strategy, including extraction choice and anchorage control during space closure, is needed to achieve the planned results with a completely invisible lingual appliance combined with aesthetic veneers.

Asunto(s)

RESUMEN

BACKGROUND: Overcoming the failure percentage of orthodontic mini-screws (OMSs), which is about 30% of overall orthodontic cases, especially in malocclusion treatment that requires orthopaedic heavy forces, is a great challenge. Bacterial infections, soft tissue and bone inflammation, and weak connections between bones and the OMS surface are among the main causalities of this failure. OBJECTIVE: The aim of the study is to evaluate in vitro the microbiological activities of the deposited nanomaterials (Silver/hydroxyapatite nanoparticles (Ag/HA NPs) and zinc oxide nanoparticles (ZnO NPs)) in terms of microbial inhibition. In addition, the in-vitro cytotoxicity and cytocompatibility of the synthesized nano-coatings prior to their in-vivo application in animal models were tested on four types of cells, namely, fibroblasts, osteocytes, osteoblasts, and oral epithelial cells. MATERIALS AND METHODS: Ag/HA NPs and ZnO NPs were built up onto the surface of titanium OMSs by electrochemical deposition. This electrochemical deposition was performed on 50 orthodontic mini screws and the deposited materials were characterized with the aid of scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) analysis, X-ray Diffraction (XRD) and nano-scratch test. In addition, the microbiological activities of the deposited nanomaterials were explored in vitro in terms of microbial inhibition. Furthermore, the cytotoxicity and cytocompatibility were tested on four types of cells, namely, fibroblasts, osteocytes, osteoblasts and oral epithelial cells. RESULTS: SEM images revealed spherical Ag NPs in the range of 40-70nm in diameter, rod-shaped HA NPs and porous scaly ZnO NPs on the surface of the OMSs. XRD analysis confirmed the crystal structures of AgNPs, HA NPs, and ZnO NPs. ZnO NPs coated OMS had the highest antimicrobial activity than Ag/HA coated OMS against Gram-positive, Gram-negative and fungal strains. Moreover, after incubation, the decrease in the number of bacterial colonies was significant with ZnO and Ag/HA nanoparticles (with the greatest decrease for the former), due to the potent antibacterial effect of nanoparticles against Escherichia coli and Enterococcus faecalis. Moreover, ZnO NPs-coated OMSs showed a better cytocompatibility with oral epithelium, bone cells, and fibroblasts compared to Ag/HA NPs. CONCLUSION: The suggested nanocoating is a promising strategy to overcome the development of an inflammatory zone around the fixed OMSs.

Asunto(s)