RESUMEN

Revolutionizing construction, the concrete blend seamlessly integrates human hair (HH) fibers and millet husk ash (MHA) as a sustainable alternative. By repurposing human hair for enhanced tensile strength and utilizing millet husk ash to replace sand, these materials not only reduce waste but also create a durable, eco-friendly solution. This groundbreaking methodology not only adheres to established structural criteria but also advances the concepts of the circular economy, representing a significant advancement towards environmentally sustainable and resilient building practices. The main purpose of the research is to investigate the fresh and mechanical characteristics of concrete blended with 10-40% MHA as a sand substitute and 0.5-2% HH fibers by applying response surface methodology modeling and optimization. A comprehensive study involved preparing 225 concrete specimens using a mix ratio of 1:1.5:3 with a water-to-cement ratio of 0.52, followed by a 28 day curing period. It was found that a blend of 30% MHA and 1% HH fibers gave the best compressive and splitting tensile strengths at 28 days, which were 33.88 MPa and 3.47 MPa, respectively. Additionally, the incorporation of increased proportions of MHA and HH fibers led to reductions in both the dry density and workability of the concrete. In addition, utilizing analysis of variance (ANOVA), response prediction models were created and verified with a significance level of 95%. The models' R2 values ranged from 72 to 99%. The study validated multi-objective optimization, showing 1% HH fiber and 30% MHA in concrete enhances strength, reduces waste, and promotes environmental sustainability, making it recommended for construction.

Asunto(s)

RESUMEN

Recent alarming tones regarding the environment and energy crises have resulted in an emergent need for the utilization of bio-based materials. The current study aims to experimentally investigate the thermal kinetics and pyrolysis behavior of lignin extracted from novel barnyard millet husk (L-BMH) and finger millet husk (L-FMH) crop residue. The characterization techniques FTIR, SEM, XRD, and EDX were employed. TGA was performed to assess the thermal, pyrolysis, and kinetic behavior using Friedman kinetic model. The average lignin yield was obtained as 16.25 % (L-FMH) and 21.31 % (L-BMH). The average activation energy (Ea) was recorded as 179.91-227.67 kJ mol-1 for L-FMH while 158.50-274.46 kJ mol-1 for L-BMH in the conversion range of 0.2-0.8. The higher heating value (HHV) was found to be 19.80 ± 0.09 MJ kg-1 (L-FMH) and 19.65 ± 0.03 MJ kg-1 (L-BMH). The results create a possibility for the valorization of extracted lignin as a potential bio-based flame retardant in polymer composites.

Asunto(s)

RESUMEN

Foxtail millet husk (FMH) is generally removed and discarded during the first step of millet processing. This study aimed to optimize a method using deep eutectic solvents (DESs) combined with ultrasonic-assisted extraction (UAE) to extract phenols from FMH and to identify the phenolic compositions and evaluate the biological activities. The optimized DES comprised L-lactic acid and glycol with a 1:2 molar ratio by taking the total flavonoid content (TFC) and total phenolic content (TPC) as targets. The extraction parameters were optimized to maximize TFC and TPC, using the following settings: liquid-to-solid ratio of 25 mL/g, DES with water content of 15%, extraction time of 41 min and temperature of 51 °C, and ultrasonic power at 304 W. The optimized UAE-DES, which produced significantly higher TPC, TFC, antioxidant activity, α-glucosidase, and acetylcholinesterase inhibitory activities compared to conventional solvent extraction. Through UPLC-MS, 12 phenolic compounds were identified, with 1-O-p-coumaroylglycerol, apigenin-C-pentosyl-C-hexoside, and 1-O-feruloyl-3-O-p-coumaroylglycerol being the main phenolic components. 1-O-feruloyl-3-O-p-coumaroylglycerol and 3,7-dimethylquercetin were identified first in foxtail millet. Our results indicated that FMH could be exploited by UAE-DES extraction as a useful source of naturally derived antioxidants, along with acetylcholinesterase and α-glucosidase inhibitory activities.

RESUMEN

This study aims to extract cellulose nanofibers (CNFs) from a sustainable source, i.e. millet husk, which is an agro-waste worthy of consideration. Pre-treatments such as mercerisation, steam explosion, and peroxide bleaching (chlorine-free) were applied for the removal of non-cellulosic components. The bleached millet husk pulp was subjected to acid hydrolysis (5% oxalic acid) followed by homogenization to extract CNFs. The extracted CNFs were characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Dynamic Light Scattering (DLS), Energy Dispersive X-ray Spectroscopy (EDX), Thermogravimetry (TG and DTG), Differential scanning calorimetry (DSC), and Solid state 13C nuclear magnetic resonance spectroscopy (solid state 13C NMR). The isolated CNFs show a typical cellulose type-I structure with a diameter of 10-12 nm and a crystallinity index of 58.5%. The appearance of the specific peak at 89.31 ppm in the solid state 13C NMR spectra validates the existence of the type-I cellulose phase in the prepared CNFs. The prepared CNFs had a maximum degradation temperature (Tmax) of 341 °C, that was 31 °C greater than raw millet husk (RMH). The outcome of the study implies that the nanofibers are prominent alternatives for synthetic fibers for assorted potential applications, especially in manufacturing green composites.

Asunto(s)

RESUMEN

In recent years, the research direction is shifted toward introducing new supplementary cementitious materials (SCM) in lieu of in place of Portland cement (PC) in concrete as its production emits a lot of toxic gases in the atmosphere which causes environmental pollution and greenhouse gases. SCM such as sugarcane bagasse ash (SCBA), metakaolin (MK), and millet husk ash (MHA) are available in abundant quantities and considered as waste products. The primary aim of this experimental study is to investigate the effect of SCBA, MK, and MHA on the fresh and mechanical properties of concrete mixed which contributes to sustainable development. A total of 228 concrete specimens were prepared with targeted strength of 25MPa at 0.52 water-cement ratio and cured at 28 days. It is found that the compressive strength and split tensile strength were enhanced by 17% and 14.28%, respectively, at SCBA4MK4MHA4 (88% PC, 4% SCBA, 4% MK, and 4% MHA) as ternary cementitious material (TCM) in concrete after 28 days. Moreover, the permeability and density of concrete are found to be reduced when SCBA, MK, and MHA are used separately and combined as TCM increases in concrete at 28 days, respectively. The results showed that the workability of the fresh concrete was decreased with the increase of the percentage of SCBA, MK, and MHA separately and together as TCM in concrete.

Asunto(s)

RESUMEN

This study used millet husk which is a waste and gum Arabic as binder to develop briquettes for domestic cooking in Northern Nigeria. The objective was to investigate the effect of particle sizes, compaction pressures and binder concentrations on the physical, mechanical and thermal characteristics of the briquettes. Furthermore, the study also accessed the economic viability of the usage of millet husk briquettes as fuel. Particle sizes of 0.3, 0.4, 0.6 and 1.7mm; compaction pressures of 10, 15, 20 and 25 MPa and binder concentrations (gum Arabic) of 25, 30, 35 and 40% were used to densify the millet husk mixed with gum Arabic at room temperature with the aid of hydraulic press. The caloric value (15.27 MJ/kg) was determined using ASTM D2015, other physical and chemical properties of the millet husk was determined by proximate and ultimate analysis which showed that volatile matter (76%), ash content (6.5%) and sulphur content (0.3%) are within the recommended range for domestic cooking fuels. It was found that the density (438 kg/m3 and 669 kg/m3), impact resistance index (70-93%) and compressive strength of the millet husk briquettes increased with compaction pressures and binder concentrations and decreases with increase in particle sizes, while for porosity of the briquettes, the above case was a reversal. The performance of the briquettes for domestic cooking were accessed by ignition time (109 and 140 s); burning rate (0.09 g/s and 0.18 g/s) and water boiling test which took 5 and 11 min to boil 1 L of water as compared to fuel wood that takes longer. Economic analysis showed that utilizing the millet husk generated in northern Nigeria will lead to huge savings in fuel wood consumption, monetary savings of about ₦ 9,257,869,268.62, and reduction in deforestation and its attendant problems. A structured questionnaire as used to ascertain the acceptability of the produced briquettes. Most of the respondents (90%) in a survey expressed willingness to use millet husk briquette as replacement for wood. The study concludes that millet husk is good for briquetting for energy applications with high potential to reduce energy poverty, minimal waste and reduce indoor pollution for domestic cooking therefore, making millet cultivation more profitable in Northern Nigeria.

RESUMEN

The current study deals with the analysis of sound absorption characteristics of foxtail millet husk powder. Noise is one the most persistent pollutants which has to be dealt seriously. Foxtail millet is a small seeded cereal cultivated across the world and its husk is less explored for its utilization in polymer composites. The husk is the outer protective covering of the seed, rich in silica and lingo-cellulose content making it suitable for sound insulation. The acoustic characterization is done for treated foxtail millet husk powder and polypropylene composite panels. The physical parameters like fiber mass content, density, and thickness of the composite panel were varied and their influence over sound absorption was mapped. The influence of porosity, airflow resistance, and tortuosity was also studied. The experimental result shows that 30-mm thick foxtail millet husk powder composite panel with 40% fiber mass content, 320 kg/m3 density showed promising sound absorption for sound frequency range above 1000 Hz. We achieved noise reduction coefficient (NRC) value of 0.54. In view to improve the performance of the panel in low-frequency range, we studied the efficiency of incorporating air gap and rigid backing material to the designed panel. We used foxtail millet husk powder panel of density 850 kg/m3 as rigid backing material with varying air gap thickness. Thus the composite of 320 kg/m3 density, 30-mm thick when provided with 35-mm air gap and backing material improved the composite's performance in sound frequency range 250 Hz to 1000 Hz. The overall sound absorption performance was improved and the NRC value and average sound absorption coefficient (SAC) were increased to 0.7 and 0.63 respectively comparable with the commercial acoustic panels made out of the synthetic fibers. We have calculated the sound absorption coefficient values using Delany and Bezlay model (D&B model) and Johnson-Champoux-Allard model (JCA model) and compared them with the measured sound absorption values.