RESUMEN

2,5-disubstituted N,N'-alkylpiperazines represent an interesting target in organic synthesis both for pharmaceutical or agrochemical applications and as a promising class of ligands in coordination chemistry. We report here a microwave-enhanced synthesis of these compounds starting from non-activated N-alkyl aziridines in the presence of catalytic amounts of simple ammonium metallates. A remarkable TOF of 2787.9 h-1 has been observed in the case of [TBA]2[ZnI4] as the catalyst (catalyst loading 0.1 mol%) and with an almost complete selectivity (up to 97%) in favor of both diastereoisomers (meso and chiral form) of the target 2,5-disubstituted piperazines, obtained in 1:1 ratio. The two isomers are easily separated, because the meso form precipitates in pure from the reaction crude. A stereochemical investigation and the unprecedented isolation of 2,6-disubstituted N,N'-alkylpiperazines allowed us to shed light on the reaction mechanism.

RESUMEN

A microwave-assisted synthesis of 7-amino-1,2,4-triazolo[1,5-a][1,3,5]triazine-2-propanamides was developed using a three-component, catalyst-free reaction of cyanamide and trimethyl orthoformate with 3-(5-amino-1H-1,2,4-triazol-3-yl)propanamides (3). The reaction tolerated structurally diverse substrates and proceeded chemo- and regio-selectively, affording the target compounds in high purity in 5-10 minutes. The convenient chromatography-free isolation and purification of the products add practicality to this method. The structural features of the prepared compounds were investigated using dynamic NMR spectroscopy, X-ray crystallography and computational chemistry calculations. X-ray crystallography performed on a representative compound, 3-(7-amino-1,2,4-triazolo[1,5-a][1,3,5]triazin-2-yl)-N-(4-benzyl)propanamide (4 l), showed the overall molecular conformation to adopt the shape of the letter C. Notable localisation of π-electron density is found within the 1,2,4-triazolo[1,5-a][1,3,5]triazine system; a relatively short C-NH2 bond is consistent with restricted rotation about this bond. This study also presents a detailed analysis of the molecular interactions in 4 l using DFT and QTAIM methods with a focus on the hydrogen-bonding and π-stacking interactions that influence the molecular packing of 4 l. The findings reveal the significant roles of N-H⋅O, N-H⋅N and C-H⋅N interactions, along with electrostatically enhanced π⋅π contacts. A broad screening for insecticidal, fungicidal and herbicidal properties identified several compounds with potent herbicidal activity against Matricaria inodora.

RESUMEN

A literature survey showed that different derivatives with the 9-phenyl-9H-carbazole or the dihydroindoline scaffold may be of biological activity including cytotoxic effect. Driven by this experience, P-functionalized derivatives of these N-heterocycles were synthesized. Three N-heterocycles, 9-(4-bromophenyl)-9H-carbazole, 3-bromo-9-phenyl-9H-carbazole and 1-(5-bromoindolin-1-yl)ethan-1-one, were coupled with dialkyl phosphites and diarylphosphine oxides using Pd(OAc)2 (10 %) as the catalyst precursor and triethylamine as the base in ethanol under microwave irradiation. The excess of the Y2 P(O)H reagent (Y=alkoxy, aryl) (30 %) served as the P-ligand in its trivalent tautomeric form (Y2 POH), hence there was no need for the usual P-ligands meaning cost and environmental burden. Hence, the presented method is a "green" approach that proved to be more efficient than the preparation by the traditional method. The products, dialkyl phosphonates and tertiary phosphine oxides obtained in 58-84 % yields were characterized, one of them also by single crystal X-ray analysis, and were subjected to in vitro biological activity evaluation. A (carbazol)yl-phenylphosphonate, an N-phenyl-(carbazol)yl-phosphonate, a (carbazol)yl-phenylphosphine oxide and an N-phenyl-(carbazol)ylphosphine oxide revealed a significant cytotoxic activity on A549 human non-small-cell lung carcinoma and MonoMac-6 acute monocytic leukemia cancer cells. The cytotoxic effect was significant as compared to that of the reference compounds.

Asunto(s)

RESUMEN

Carbon-carbon bond formation in the phenanthridine 7-position was achieved by microwave-assisted Claisen rearrangement of 8-allyloxyphenanthridines. The reactions took place with excellent regioselectivity and high chemical yields. If the 7-position was substituted, rearrangement to C-9 took place, but the reaction occurred less readily. Rearrangements of 8-allyloxy-5,6-dihydrophenanthridines (phenanthridines with a saturated B-ring) gave a mixture of 7- and 9-substituted products. The experimental results were supported by DFT (density functional theory) calculations.

RESUMEN

Nanomaterials have found use in a number of relevant energy applications. In particular, nanoscale motifs of binary metal sulfides can function as conversion materials, similar to that of analogous metal oxides, nitrides, or phosphides, and are characterized by their high theoretical capacity and correspondingly low cost. This review focuses on structure-composition-property relationships of specific relevance to battery applications, emanating from systematic attempts to either (1) vary and alter the dimension of nanoscale architectures or (2) introduce conductive carbon-based entities, such as carbon nanotubes and graphene-derived species. In this study, we will primarily concern ourselves with probing metal sulfide nanostructures generated by a microwave-mediated synthetic approach, which we have explored extensively in recent years. This particular fabrication protocol represents a relatively facile, flexible, and effective means with which to simultaneously control both chemical composition and physical morphology within these systems to tailor them for energy storage applications.

RESUMEN

Solvothermal synthesis of mesoporous materials based on amphiphilic molecules as structure-directing agents can be enhanced using non-conventional technologies for stirring and thermal activation. Here, we disclose a green synthesis approach for the preparation of cerium-modified hexagonally ordered silica sieves. Ultrasound micromixing enabled us to obtain well-dispersed Ce in the self-assembled silica network and yielded ordered materials with high cerium content (Ce/Si molar ratio = 0.08). Microwave dielectric heating, applied by an innovative open-end coaxial antenna, was used to reduce the overall hydrothermal synthesis time and to improve the surface area and textural properties. These mesoporous materials were used as a Ni catalyst support (10 wt.% metal loading) for the ethanol steam reforming reaction. The new catalysts featured complete ethanol conversion, high H2 selectivity (65%) and better stability, compared to the same catalyst prepared with magnetic stirring and conventional heating. The Ce-promoted silica sieves offered a suitable support for the controlled growth of nanocarbon that does not result in catalyst deactivation or poisoning after 6 h on stream.

RESUMEN

Microwave (MW)-assisted reductive aminations of aldehydes and ketones were carried out in the presence of commercial and homemade heterogeneous Rh-based catalysts. Ultrasound (US) was used to improve dispersion and stability of metal nanoparticles, while commercial activated carbon and carbon nanofibers were used as supports. Moreover, various bio-derived molecules were selected as substrates, and aqueous ammonia was used as a cheap and non-toxic reagent. MW combined with heterogeneous Rh catalysts gave a 98.2 % yield in benzylamine at 80 °C with 10 bar H2 for 1 h; and a 43.3 % yield in phenylethylamine at 80 °C and 5 bar H2 for 2 h. Carbon nanofibers proved to be a better support for the metal active phase than simple activated carbon, since a limited yield in benzylamine (10.6 %) but a high selectivity for the reductive amination of ketones was obtained. Thus, raspberry ketone was converted to raspberry amine in a 63.0 % yield.

RESUMEN

Three synthesis procedures for the covalent-organic framework (COF) TpPa-1 are studied with the purpose of setting up the most promising one in a fast and green way, leading to a more environmentally friendly and sustainable process. With conventional heating, good crystallinity and a high BET specific surface area (SSA) of up to 1007 m2 ⋅ g-1 are achieved at 170 °C for 3 days using water as the quintessential green solvent. However, the application of microwave radiation in the synthesis for this crystalline porous polymer allows reaction times to be shortened to 30 min while maintaining structural and textural properties (BET SSA of 928 m2 ⋅ g-1 ) and obtaining yields close to 98 % (vs. 90 % in the hydrothermal synthesis). The water-assisted mechanochemical synthesis is also an environmentally friendly synthetic approach; with heating at 170 °C in a two-step process (10+10 min), high crystallinity is achieved, a BET SSA of 960  m2 ⋅ g-1 and a yield of 98 % for TpPa-1.

RESUMEN

Several multicomponent synthetic approaches were elaborated for plenty of novel nitrogen or oxygen heterocycles containing a phosphonate or a phosphine oxide moiety. All multicomponent reactions were optimized through a model reaction in respect of the heating mode, molar ratio of the starting materials, atmosphere, catalyst, temperature, reaction time and solvent applied, and then, the extended preparation of small libraries of structurally-related compounds was performed. Most of the reactions could be considered as "green syntheses", as they were carried out in the absence of any catalyst and/or solvent using microwave (MW) irradiation or even at ambient temperature. The scaling-up of a MW-assisted synthesis was also elaborated in a continuous flow MW system. Altogether more than 150 heterocyclic organophosphorus compounds were synthesized, among them several derivatives showed moderate or promising activity against the HL-60 cell line and Bacillus subtilis bacteria.

Asunto(s)

RESUMEN

Inspired by molecular self-assemblies in nature, this article reports a versatile strategy for confined encapsulation of single-atomic metal into high-quality rGO nanosheets by the microwave-assisted emulsion micelle method. Multilayer self-assembly of organometallics-surfactants micelles into the interlayer of nanosheets can not only promote microwave exfoliation and reduction of GO but also precisely control loading and distribution of single-metal atoms. With this synthetic strategy, the simultaneous trinity of exfoliation, reduction, and composition are achieved for 1 min. Experimental results and density functional theory calculations demonstrate that graphene-supported FeN4 O2 sites exhibit optimal binding energy toward superior selective adsorption (adsorption amount of 1975.6 mg g-1 with separation efficiency of 97.6%) and electrocatalytic oxidation (TOFs as high as 1.31 min-1 ). This work provides a simple and efficient avenue for the large-scale preparation of single-atomic metal composites in environmental and energy fields.

RESUMEN

We developed a semiconductor microwave system to improve the ignition process in a combustion system. Under atmospheric pressure conditions, large plasma was successfully ignited by a 2.45 GHz microwave, and it is characterized in comparison with standard spark plug ignition and laser ignition. The size of the microwave power source was also effectively reduced with the minimal size (100 × 60 mm2) that could fit in the palm of a hand. We then prototyped a microwave plug with a diameter of 4 mm, which is smaller than the standard spark plugs for passenger cars. The design and electric field strength are discussed in detail. Combustion experiments were conducted using a motorcycle engine and an actual light vehicle, and significant fuel efficiency improvement was experimentally obtained. We investigated the wear of the plug caused by continuous operation, and efficiently improved the endurance by swinging the resonance frequency between 2.4 and 2.5 GHz. In a passenger car engine experiment using a flat panel igniter, significant fuel efficiency improvement was confirmed. Further failure analysis revealed that the ceramic was severely damaged by a large current surge.

RESUMEN

The origin of the specific effect of microwaves on chemical reactions (the microwave effect) was investigated by examining the effect of microwaves on small groups of molecules such as clusters. The origin of the effect was verified by introducing 2.45 GHz microwaves into a system equipped with a supersonic molecular jet and a special microwave feedthrough to record the fluorescence excitation spectrum of molecules. The carrier gas was bubbled through water and introduced into a phenol-filled sample holder to generate phenol-water clusters. Subsequently, it was confirmed that exposure of the phenol-water clusters contained in the molecular jet ejected from the pulse valve to microwave radiation increased the fluorescence derived from the phenol monomer. This is considered to occur because the phenol-water clusters in the molecular jet absorb microwaves and collapse, thereby increasing the abundance of phenol monomers. This result suggests that microwaves affect not only bulk systems but also small groups of molecules, and that local selective heating, which is one of the causes of the microwave effect, may occur.

Asunto(s)

RESUMEN

Among the various organic pollutants and industrial chemicals, 4-nitrophenol has been one of the most monitored substances in aqueous environments, due to its enhanced solubility in such systems. This research reports for the first time the microwave-assisted synthesis of CdS/carbon/MoSx hybrids and the subsequent utilization of such systems as photocatalysts for 4-nitrophenol degradation. The hybrids demonstrated a variable photocatalytic activity, by using a variety of organic substances as precursors for the solvothermal carbonization step. By using ascorbic acid as precursor, the corresponding ternary composite exhibited excellent photocatalytic activity, with the 4-nitrophenol concentration been almost quantitatively decayed within 45 min of irradiation. This could be ascribed due to the generation of a high population of heterojunctions as well as the chemical speciation of Mo-based nanostructures. Such ternary hybrids may be utilized as potential photocatalytic systems in processes, where removal of toxic water-soluble substances is the key issue.

Asunto(s)

RESUMEN

Schizophrenia and depression are diseases that significantly impede human functioning in society. Current antidepressant drugs are not fully effective. According to literature data, the effect on D2R or 5-HT1AR can effectively reduce the symptoms of depression or schizophrenia. Recent research hypothetized that the synergism of both of these receptors can improve the effectiveness of therapy. Ipsapirone, a representative of long-chain arylpiperazines, is a known 5-HT1AR ligand that has antidepressant effect. This compound has no affinity for the D2R. Bearing in mind, we decided to design ligands with improved affinity to D2R and confirmed that in some cases elongation of the carbon linker or arylpiperazine exchange may have beneficial influence on the binding to D2R and 5-HT1AR. Four groups of ligands being ipsapirone analogues with butyl, pentyl, hexyl and stiffened xylene chains were designed. All compounds were obtained in solvent-free reactions supported by a microwave irradiation with an efficiency mainly above 60%. All ligands containing 1-(2-pyrimidinyl)piperazine exhibited high affinity to 5-HT1AR. In this case, chemical modifications within the chain did not affect the affinity to D2R. In the case of ligands containing 1-phenylpiperazine, 1-(3-trifluoromethylphenyl)piperazine, 1-(1-naphthyl)piperazine, and 1-(4-chlorophenyl)piperazine, elongation of carbon linker increases of affinity to D2R. For ligands containing 1- (2-pyridyl) piperazine, and 1-(2,3-dichlorophenyl)piperazine, we observed an opposite effect. For ligands containing 1-phenylpiperazine, 1-(2-methoxyphenyl)piperazine and 1-(2-pyridyl)piperazine, chain elongation had no effect on 5-HT1AR binding. In turn of ligands containing 1-(3-trifluoromethylphenyl)piperazine and 1- (2,3-dichlorophenyl)piperazine, we observed that elongation of carbon linker has a positive influence to 5-HT1AR. Molecular modelling was used to support the SAR study.

Asunto(s)

RESUMEN

A novel catalyst-free synthetic approach to 1,2,3-triazolobenzodiazepinones has been developed and optimized. The Ugi reaction of 2-azidobenzaldehyde, various amines, isocyanides, and acids followed by microwave-assisted intramolecular azide-alkyne cycloaddition (IAAC) gave a series of target heterocyclic compounds in moderate to excellent yields. Surprisingly, the normally required ruthenium-based catalysts were found to not affect the IAAC, only making isolation of the target compounds harder while the microwave-assisted catalyst-free conditions were effective for both terminal and non-terminal alkynes.

RESUMEN

An environment-friendly synthetic protocol was developed to access polyfunctionalized bipyridines from readily available amines, chromone-3-carboxaldehydes, and pyridinylacetonitriles under catalyst- and additive-free conditions using the bio-renewable neoteric solvent dihydrolevoglucosenone (Cyrene™). In this strategy, amines served as both a mild-base promoter and a substrate. In addition, water was the only by-product of this reaction. This multi-component protocol provided highly diverse 2,3-, 3,3-, and 3,4-bipyridines in good-to-excellent yields. Operational simplicity, short reaction time, excellent atom economy, and easily obtainable substrates are among the features of this microwave-assisted synthesis. Additionally, the compounds synthesized via this method have demonstrated the ability to detect heavy metals, specifically mercury(II), copper(II), and iron (III) ions.

RESUMEN

Glycans carry a vast range of functions in nature. Utilizing their properties and functions in form of polymers, coatings or glycan derivatives for various applications makes the synthesis of modified glycans crucial. Since amines are easy to modify for subsequent reactions, we investigated regioselective amination conditions of different saccharides. Amination reactions were performed according to Kochetkov and Likhoshertov and accelerated by microwave irradiation. We optimized the synthesis of glycosylamines for N-acetyl-d-galactosamine, d-lactose, d-glucuronic acid and l-(-)-fucose using the design of experiments (DoE) approach. DoE enables efficient optimization with limited number of experimental data. A DoE software generated a set of experiments where reaction temperature, concentration of carbohydrate, nature of aminating agent and solvent were investigated. We found that the synthesis of glycosylamines significantly depends on the nature of the carbohydrate and on the reaction temperature. There is strong indication that high temperatures are favored for the amination reaction.

Asunto(s)

RESUMEN

Developing new and selective 5-HT7R ligands may have a key impact on the treatment of central nervous system diseases including depression. We have found that indoleaminotriazine core fused with alkyl aryl moiety exhibits high affinity and selectivity to 5-HT7R. SAR analysis demonstrated that the ethyl or ethoxy group (5c 5-HT7R Ki = 8 nM; 5d 5-HT7R Ki = 55 nM) is the optimal carbon linker between triazine and aryl moiety. The results of the molecular dynamics simulations show stable interaction with E7.34 upon binding to a 5-HT7R. Compounds 5c and 5d were tested for early ADMET parameters. Compounds are not hepatotoxic and exhibit moderate potential interaction with other drugs metabolized by CYP3A4 or CYP2D6.

Asunto(s)

RESUMEN

COFs were synthesized by a microwave-assisted solvothermal route, with the building blocks containing 1,3,5-tris(4-aminophenyl) benzene and 2,3,5,6-tetra-fluoroterephthalaldehyde (or 1,4-phthalaldehyde). The -F groups introduced into the benzene ring promoted hydrophobicity and stability of the COFs. The universality and long effectiveness of oil adsorption can be realized when applying COFs as adsorbent. The powder also exhibited excellent water-in-oil emulsions separation performance, with the separation efficiency no lower than 99.5%. In this work, the use of microwave solvothermal synthesis of superhydrophobic COFs is potential to replace the conventional synthesis process and more suitable for industrial scale-up production. Furthermore, the findings provide a new strategy for solving the problem of oil spill treatment and industrial water-in-oil emulsions separation by using the emerging 2D COFs.

RESUMEN

Reactive extraction is an emerging operation in the industry, particularly in biorefining. Here, reactive extraction was demonstrated, enhanced by microwave irradiation to selectively heat the reactive phase (for efficient reaction) without unduly heating the extractive phase (for efficient extraction). These conditions aimed at maximizing the asymmetries in dielectric constants and volumes of the reaction and extraction phases, which resulted in an asymmetric thermal response of the two phases. The efficiency improvement was demonstrated by dehydrating xylose (5 wt % in water) to furfural with an optimal yield of approximately 80 mol % compared with 60-65 mol % under conventional biphasic conditions, which corresponds to approximately 50 % reduction of byproducts.