RESUMEN

In this study, the generation of domestic waste electrical and electronic equipment (WEEE) and waste printed circuit board (WPCB) were estimated, from 2015 to 2030. Based on the number of EEE put on the Brazilian market, the possession rate in the Brazilian households and obsolescence amounts of five EEE types were estimated using time series. The results show that, between 2015 and 2030, the quantity of WEEE generated per year will increase from 131.87 kt to 195.22 kt. In this period, WPCB generation will stay around 10% of WEEE generation. Additionally, this study shows that the urban mining potential of the materials recoverable from WPCB can be an important revenue source, with environmental benefits deriving from energy savings and a reduction in CO2 emissions. The results of this study provide a quantitative basis that may help decision makers develop strategic policies for WEEE management, considering material circularity.

Asunto(s)

RESUMEN

Engineered Nanomaterials (ENMs) or products containing ENMs, known as nano-enabled products are commercialized globally by a large number of companies. Concern about the potential risks and negative impacts of releasing ENMs into the environment is under investigation. For this reason, methodologies to estimate the probable mass concentrations of ENMs released in different regions of the world have been developed. As a first attempt to estimate the probable mass flows of nanosized titanium dioxide (nano-TiO2) released in Mexico, we developed a Probabilistic Material Flow Analysis (PMFA) for 2015. The model describes probabilistic mass flows of released nano-TiO2 during the life cycle of sunscreens, coatings, ceramic, and other nano-enabled products, including the flows through the solid waste and wastewater management systems, as well as the transfer of nano-TiO2 to three environmental compartments (atmosphere, topsoil, and surface water). The PMFA incorporates the uncertainty related to the input data. We observed that the most significant nano-TiO2 flows occur to the surface water, landfill, and soil compartments, targeted as the main "hot-spots", where living organisms could be more exposed to this material. Further improvements in the model are needed due to some data gaps at some life cycle stages, for instance, solid waste management and reused wastewater manipulation for irrigation purposes. Finally, the model developed in this study can be adjusted to assess other ENM releases and can be beneficial for further investigation in fate modeling and environmental risk assessment.

Asunto(s)

RESUMEN

Brazil stands as a prominent beef producer and exporter, witnessing major transformations and expansions in its production chain over the past 20 years. These changes have prompted concerns regarding waste generation and environmental pressure. This study employs material flow analysis (MFA) to quantify nitrogen flows throughout the cattle slaughter process and subsequent beef consumption in Brazil, spanning from 2011 to 2021. The analysis encompasses co-production streams like leather, tallow, viscera, and blood. Nitrogen use efficiency (NUE) and the nitrogen cascade indicator (NCI) were used to evaluate efficiency and nitrogen accumulation in the production chain. Nitrogen inputs in the system increased by 8.47 %, while beef production rose by 7.29 %. In contrast, per capita beef consumption decreased by 1.29 kg, despite an overall consumption increase of 2.84 %, attributed to population growth in Brazil. Beef exports witnessed a notable surge of 86.03 %. Conversely, human excreta and food waste losses experienced increments of 10.88 % and 2.84 %, respectively. Examining NUE reveals the highest values during the slaughter phase (90 %), followed by processing, transportation, and storage stages (79-88 %). The consumption phase exhibited the lowest NUE values (29-34 %). Regarding the cumulative nitrogen effect, the NCI varied between 77 % and 82 % throughout the study period. This highlights opportunities for enhancing nitrogen use efficiency, particularly by addressing food waste at the consumer level. Notably, the study observes nitrogen accumulation across the Brazilian beef production chain, potentially contributing to the nitrogen cascade effect and heightening environmental pressure. Recognizing these dynamics provides avenues for targeted improvements, emphasizing the need to address nitrogen-related challenges and enhance sustainability in the beef production and consumption landscape.

Asunto(s)

RESUMEN

Identifying sources is crucial for proposing effective actions to combat marine litter pollution. Here, we used an innovative approach to identify hotspots of mismanaged plastic waste (MPW) within Brazil and subsequent leakage to the ocean, based on population density, socio-economic conditions, municipal solid waste management and environmental parameters. We estimated plastic waste generation and MPW for each of the 5570 Brazilian municipalities, which totaled 3.44 million metric tons per year. Then, we estimated the probability of litter mobilization and transport (P) and the relative risk of leakage to the ocean (MPW × P). The Guanabara Bay and La Plata River comprised the main oceanic entry hotspots of litter produced in Brazil. The use of national databases allowed us to increase spatial and temporal granularity, offering a detailed baseline for the application of prevention and mitigation actions. However, overcoming data limitations is still a challenge in Brazil as in other Global South countries.

Asunto(s)

RESUMEN

Marine-based activities are a critical source of plastic waste into the ocean. This is particularly important in countries with a competitive fishing industry, such as Peru. Thus, this study aimed to identify and quantify the major flows of plastic waste accumulating in the ocean from ocean-based sources within the Peruvian Economic Exclusive Zone. A material flow analysis was elaborated to analyze the stock of plastic and its release to the ocean by a set of Peruvian fleets, including the fishing industry, merchant vessels, cruises, and boating vessels. Results show that in 2018 between 2715 and 5584 metric tons of plastic waste entered the ocean. The fishing fleet was the most pollutant, representing approximately 97 % of the total. Moreover, fishing gear loss represented the highest single-activity contribution, although other sources, such as plastic packaging and antifouling emissions, have the potential to become vast sources of marine plastic pollution.

Asunto(s)

RESUMEN

Given the agricultural demand to supply animals with food, the scope of today's soybean production and international trade can influence the nitrogen cycle. Rather than using soybeans from within the region of animal production, animal producers import nutritional supplements from distant growers. This widely opens the biogeochemical cycle of nitrogen, which reduces local recycling and increases carriage of reactive nitrogen via the supply chain. Ultimately, this potentiates the effects of a "nitrogen cascade" process. This study estimates nitrogen flows for Brazilian soybean transported to feed European livestock and attempts to quantify the understanding of how this flow can impact the nitrogen cascade effect. The hypothesis is that the growing trade of Brazilian soybean products is sufficient to spike reactive nitrogen production that can potentially cause distant environmental impacts of the nitrogen cascade. In this respect, the estimation of the nitrogen flows was evaluated using material flow analysis, and the cascade effect was quantified by means of a nitrogen cascade indicator (NCI). Notably, NCI can calculate the released amount of nitrogen in the environment along the entire supply chain of livestock products. NCI-based evaluation of Brazilian soybean products consumed by European livestock indicated the accumulation of nitrogen levels. There was also an increase in nitrogen flows in the Brazilian phase (0.058 Gg in 2007 to 139.86 Gg in 2019 for soybean meal; 584.28 Gg in 2007 to 309.78 Gg in 2019 for soybeans) accompanying a stability in European livestock production. This highlights the necessity for adjustments in nitrogen circularity between all levels of food production and improved strategies of more localised feed autonomy for sustainable global development. Supplementary Information: The online version contains supplementary material available at 10.1007/s10113-023-02034-1.

RESUMEN

Plastic packaging has been used increasingly worldwide in a broad range of application. Plastic packaging has a short lifetime, which generates a large amount of waste. However, robust information on plastic packaging waste flow is generally not available, especially for developing countries such as Brazil. We analyzed and quantified Brazilian post-consumer plastic packaging waste (PPW) flows using material flow analysis (MFA) for the year 2017. The system modeled covered from the manufacturing stage of plastic packaging up to its waste management stage. We used a range of data sources, whose quality we assessed using uncertainty characterization. The results showed that Brazil generated 12 Mt of PPW in 2017, and the management of 63% of that was not monitored. The majority of monitored PPW was disposed of into landfills, but 0.8 Mt of PPW was improperly disposed. Informal collection was 24% greater than formally managed selective collection. Only 4.5% of the PPW generated in Brazil was recycled. The results identified the major national challenges in relation to PPW management as being that information systems needed to be improved, informal waste collectors needed to be socially and productively included in the management systems, and recovery systems needed to be developed towards a circular economy.

Asunto(s)

RESUMEN

Waste Management in megacities is one of the most relevant issues around the world due to its environmental impacts and economic costs. In this work, we evaluate the application of the theoretical-methodological framework provided by Social Metabolism and Material Flow Analysis to analyze the Municipal Solid Waste Management in the Autonomous City of Buenos Aires (Argentina). The quantitative results evidence that 46% of the city's waste was disposed of in landfills outside its geographical limits, transferring environmental costs to the population on the outskirts of the city and other administrative jurisdictions. The city recycled the other 54% of the waste using different strategies like green centers for recyclable domestic waste (operated by 5500 registered Urban Recyclers/waste pickers recover), a Plant for treatment of pruning activities waste, a Plant for the treatment of construction and demolition waste, and a Mechanical-Biological Treatment Plant. Also in the city work, approximately 5000 informal waste pickers contributing to recycling waste. The approach shows the importance of the inclusion of waste pickers in the formal recycling system, and the failures of costly and inefficient large-scale technologies, as the Mechanical-Biological Treatment Plant. Also, the application of Social Metabolism and MFA allowed a characterization of the flows and processes that make up Municipal Solid Waste management in the area of study, despite the lack of systematized quantitative information. It facilitates a holistic visualization of waste management in the city for decision-makers.

Asunto(s)

RESUMEN

Waste pickers (WPs) are considered a strong suggestion to become practical mediators of the circular economy (CE) in emerging economies. This new recommendation intends to strengthen WPs' role in household solid waste management while supporting the establishment of CE. Municipalities often do not recognize WPs as service providers and frequently discriminate against them. In such a challenging situation, could a socio-integrated recycling system with integrated WPs be a robust strategy to boost a CE? Belo Horizonte is a learning platform to answer this research question because this Brazilian city has a long-term commitment to social integration. The work applies the combination of participatory observation, multi-year material flow analysis (MFA), and structural agent analysis (SAA) to identify allocative resources, legitimation, and cultural values that are fundamental to operationalizing CE. The MFA results show a significant increase in waste generation, but not more than 4% of recyclable waste generated could be collected as input for WP cooperatives. The number of WPs registered in cooperatives, the market price of recyclables, and regulatory legislation for packaging products are classified as barriers for the successful extension of a socio-integrated recycling system identified in the SAA. This study suggests that knowing the target group (e.g., city hall and industries) brings opportunities for WPs to disclose niches (based on a small network of agents with expectations and visions) and can potentially create socio-technical regimes to implement a conscious and sustainable CE.

Asunto(s)

RESUMEN

Potassium (K), along with nitrogen and phosphorus, is an essential resource to ensure agricultural productivity and, therefore, food security around the world. However, diminishing physical reserves of potash salts and high-price volatility of potassium chloride, the main source of K to agricultural soils, has raised concerns about a K scarcity scenario, mainly in countries that depend on fertilizer imports to sustain its production. In this context, Brazil is one of the main agricultural producers in the world, having a major role in the global K flows, since the country sustains its production by a high consumption of imported K fertilizers. In order to seek opportunities to contribute to a more sustainable management of K resources, tools such as the material flow analysis (MFA) can be used to highlight the main K stocks and flows in a country scale, and identify options for reuse and recycle. This study proposed a MFA of K for Brazil, considering the base-year 2013. A total of forty-four flows and seven stocks were identified and quantified considering nine main processes related to human activity. According to the results, for the year of study, the main inputs of K in Brazil were in the form of fertilizers (4.1 × 103 Gg of K per year), and the main outputs were in the form of grain exports (9.1 × 102 Gg of K per year). Agricultural soils were the main stock for K in the country, and from the total flow of 7.3 × 103 Gg of K per year applied to soils, 67% came out as agricultural products, 13% was lost through erosion and leaching, and 20% remained in the soils. The flow of K actually consumed by the Brazilian population was 3.5 × 102 Gg of K per year, just 8.4% of the total food produced in the country. About 1.9 × 103 Gg of K per year has been lost to the environment in sewage streams and solid landfill waste. Prospects for more sustainable K management in the country are identified and discussed.

Asunto(s)

RESUMEN

In cities, the achievement of waste-related legal requirements and the main drivers of Integrated Sustainable Waste Management (ISWM) need adequate indicators and adaptable-to-case tools and strategies. In this work, we combine Material Flow Analysis (MFA) and waste characterizations to develop a mass balance table to design, calculate and analyse indicators related to the formal and informal waste sub-circuits of Tandil, a medium-sized city of the Buenos Aires province (Argentina). Results show that global recovery is very low (2.3% ± 0.16) and mainly driven by the Informal Recovery Sector (IRS). Also, the IRS strategy is more effective, recovering 40% ± 8.0 of its targeted materials from non-household sources. Regarding each material recovery performance, results show significant differences. For paper and board, recovery exceeds 20%. For HDPE, Tetra brik and Ferrous Metals are lower than 1%. In the case of PET and Glass, 9.6 and 9.0% of what is generated in households is recovered, respectively. However, the global recovery rate of each material is different: 2.9% ± 0.4 for PET and 5.5% ± 1.4 for Glass. Our research show that strategies in place are insufficient regarding legislation in force. Even a hypothetically 100% effectiveness in them will account only for 20.9% ± 2.1 of global recovery. Addressing organic waste, therefore, is imperative. Considering the current province law provision of final disposal diversion, accounting for the work of the IRS is key because they recover more waste than the official strategy. Regarding open dumps eradication, we estimate that up to 17% of generated waste is incorrectly final disposed through private skips illegally dumped. A tracking system for skips could avoid this situation.

Asunto(s)

RESUMEN

This manuscript aimed to identify the energy demand, and environmental aspects and impacts of crop fertilisation with human urine when compared to using mineral fertilisers. The Material Flow Analysis and Life Cycle Assessment methods were adopted covering the options from "cradle to grave". The fertilisation with human urine included the collection, storage, transportation, application and field emissions, while the fertilisation with mineral fertilisers included primary production of fertilisers, transportation, application and field emissions. The reference flows were based on the fertilisation of 1 ha of maize with 225 kg of nitrogen, 29 kg of phosphorus and 48 kg of potassium oxide. We analysed the environmental aspects such as nitrogen and phosphorus mass balance, energy demand and water depletion, as well as environmental impacts such as global warming, human toxicity, photochemical ozone formation, acidification, eutrophication, freshwater ecotoxicity, water scarcity and resource depletion. The agricultural fertilisation with full volume of human urine closer to the source presented smaller energy demand and environmental impact indicator values when compared to solid mineral fertiliser, despite the uncertainties. The fertilisation with human urine was more advantageous with transportation distances up to 134 km (energy demand) and 84 km (environmental categories) by truck compared to 1841 km of mineral fertiliser. Ammonia volatilisation control was key to reduce acidification and eutrophication indicator values. When considering additional gains such as the reduction of water demand and wastewater generation from a waterless collection of human urine, the indicator values of environmental aspects and impacts of fertilisation with human urine were smaller than those with mineral fertiliser and reached a break-even point of 193 km (energy demand) and 185 km (environmental categories). The nutrient cycling through resource-based sanitation offers an opportunity to expand sanitation access with smaller environmental impacts and more efficient water-energy-nutrient nexus.

Asunto(s)

RESUMEN

Municipal solid waste management (MSWM) is considered an important public health, economic and environmental concern, especially in developing countries. This paper introduces the situation of MSWM in La Paz (Bolivia) in 2016, and is based on the Wasteaware indicators and waste flow analysis, useful tools for classifying and comparing waste treatment and management plans among other countries. Taking into account the lack of technology in waste treatment and the presence of a developed informal sector, the paper analyses the main strengths and weak points for implementing a sustainable MSWM. The research conducted revealed that the MSWM of La Paz is not efficient with regard to collection, recycling (8%), financial sustainability, and equity of the service. At the same time, local Government and stakeholders are interested in implementing new MSWM methods for improving the current sanitary state of the city and many efforts were made over the last ten years. In general terms, La Paz could be considered as a good study area for developing plans for waste valorization, becoming an example for a low-middle income developing big city of Latin America. The study provided a few considerations about the affordability of the methodology applied and critically analyzed the case study proposed.

Asunto(s)

RESUMEN

Iceland and Trinidad and Tobago are small open, high-income island economies with very specific resource-use patterns. This article presents a material flow analysis (MFA) for the two countries covering a time period of nearly five decades. Both countries have a narrow domestic resource base, their economy being largely based on the exploitation of one or two key resources for export production. In the case of Trinidad and Tobago, the physical economy is dominated by oil and natural gas extraction and petrochemical industries, whereas Iceland's economy for centuries has been based on fisheries. More recently, abundant hydropower and geothermal heat were the basis for the establishment of large export-oriented metal processing industries, which fully depend on imported raw materials and make use of domestic renewable electricity. Both countries are highly dependent on these natural resources and vulnerable to overexploitation and price developments. We show how the export-oriented industries lead to high and growing levels of per capita material and energy use and carbon dioxide emissions resulting from large amounts of processing wastes and energy consumption in production processes. The example of small open economies with an industrial production system focused on few, but abundant, key resources and of comparatively low complexity provides interesting insights of how resource endowment paired with availability or absence of infrastructure and specific institutional arrangements drives domestic resource-use patterns. This also contributes to a better understanding and interpretation of MFA indicators, such as domestic material consumption.

RESUMEN

After studying the recycling collection system of polyethylene terephthalate (PET) bottles worldwide, the authors conducted an intercept survey in Beijing. Two separate questionnaires were issued, one questionnaire to PET bottle consumers and one to PET bottle recyclers. In this study, consumers are defined as people that consume PET-bottled beverages in their daily life. Recyclers were defined as those involved in the collection and recycling of PET bottles. These include scavengers, itinerant waste buyers, small community waste-buying depots, medium/large redemption depots, and recycling companies. In total, 580 surveys were completed, including 461 by consumers and 119 by recyclers. The authors found that consumption of PET bottles in Beijing was nearly 100,000 tonnes in 2012. Age, occupation, gender, and education were identified as significant factors linked to PET-bottled beverage consumption, while income was not a significant factor. 90% Of post-consumed PET bottles were collected by informal collectors (i.e., scavengers and itinerant waste buyers). The survey also found that nearly all PET bottles were reprocessed by small factories that were not designed with pollution control equipment, which allows them to offer higher prices for waste recyclable bottles. As Beijing is trying to build a formal recycling collection system for recyclables, subsidies should be given to the formal recycling sector rather than being charged land use fees, and attention should also be given to informal recyclers that make their living from the collection of recyclables. Informal and formal sectors may work together by employing the scavengers and itinerant waste buyers for the formal sectors. In addition to the recycling of PET bottles, concern should also be allocated to reduce consumption, especially among young people, as they, compared to other groups, have a stronger demand for PET-bottled beverages and will be the main body of society.

Asunto(s)