RESUMEN

Consumers are interested in new sustainable ingredients but are unwilling to accept undesirable sensory properties in their food products. Luffa (Luffa cylindrica) is mainly harvested and processed for its fibrous network, which is used as an exfoliator, while its seeds are usually discarded. However, the seeds have been found to have various nutritional benefits. As such, this study investigated the sensory properties of luffa seed powder added to yogurt and compared it to other seed powder (flax, sunflower, chia, and hemp). Consumers (n = 107) evaluated their liking of the different seeds added to yogurt using hedonic scales and the sensory properties using check-all-that-apply (CATA). The luffa seeds when mixed with yogurt were associated with off-colour, off-flavour, metallic, strong flavour, bitter, salty, earthy and decreased consumer liking. The flax and sunflower seeds were found to be sweet, nutty, cooked, mild flavour, and to have a smooth texture. The overall liking scores for the flax and sunflower seed samples were significantly higher than the luffa and hemp samples. Future studies should investigate different drying and roasting treatments to improve the sensory properties of the luffa seeds.

Asunto(s)

RESUMEN

A novel monopartite dsRNA virus, tentatively named "sponge gourd amalgavirus 1" (SGAV1), was discovered by high-throughput sequencing in sponge gourd (Luffa cylindrica) displaying mosaic symptoms in Jiashan County, Zhejiang Province, China. The genome of SGAV1 is 3,447 nucleotides in length and contains partially overlapping open reading frames (ORFs) encoding a putative replication factory matrix-like protein and a fusion protein, respectively. The fusion protein of SGAV1 shares 57.07% identity with the homologous protein of salvia miltiorrhiza amalgavirus 1 (accession no. DAZ91057.1). Phylogenetic analysis based on the RNA-dependent RNA polymerase (RdRp) protein suggests that SGAV1 belongs to the genus Amalgavirus of the family Amalgaviridae. Moreover, analysis of SGAV1-derived small interfering RNAs indicated that SGAV1 was actively replicating in the host plant. Semi-quantitative RT-PCR showed higher levels of SGAV1 expression in leaves than in flowers and fruits. This is the first report of a novel amalgavirus found in sponge gourd in China.

Asunto(s)

RESUMEN

Recent advancements in tissue engineering have witnessed luffa-derived scaffolds, exhibiting their exceptional potential in cellular proliferation, biocompatibility, appropriate interconnectivity, and biomechanical strength. In vivo studies involved implanting fabricated scaffolds subcutaneously in Wistar rats to evaluate their impact on the heart, liver, and kidneys. This approach provided a safe and minimally invasive means to evaluate scaffold compatibility with surrounding tissues. Male Wistar rats were categorized into four distinct groups, Group A, B, C, and D are referred to as 3% LC implanted scaffolds, 5% LC implanted scaffolds, control (without luffa scaffolds), and Sham (without any scaffold implantation), respectively. Histological analysis in all the groups indicated that the animal models did not exhibit any signs of inflammation or toxicity, suggesting favorable tissue response to the implanted scaffolds. Initial observations revealed elevated levels of enzymes and biomarkers in the experimental groups after a 24 h interval, including aspartate aminotransferase (AST), alanine aminotransferase (ALT), alkaline phosphatase (ALP), bilirubin, creatine kinase-MB (CK-MB), and serum creatinine. However, these parameters normalized 3 weeks post-implantation, with no significant increase compared to the control groups, suggesting that the implanted luffa-based scaffolds did not induce adverse effects on the heart, liver, and kidneys. Furthermore, the scaffold's significant pore size and porosity enable it to release drugs, including antibacterial medications. This study demonstrates promising results, indicating excellent scaffold porosity, sustained drug release, affirming the in vivo biocompatibility, absence of inflammatory responses, and overall tissue compatibility highlighting the immense potential of these luffa-based scaffolds in various tissue engineering and regenerative medicine applications.

Asunto(s)

RESUMEN

Luffa spp. is an important worldwide cultivated vegetable and medicinal plant from the Cucurbitaceae family. In this study, we report a high-quality chromosome-level genome of the high-generation inbred line SG261 of Luffa acutangula. The genomic sequence was determined by PacBio long reads, Hi-C sequencing reads, and 10× Genomics sequencing, with an assembly size of 739.82 Mb, contig N50 of 18.38 Mb, and scaffold N50 of 56.08 Mb. The genome of L. acutangula SG261 was predicted to contain 27,312 protein-coding genes and 72.56% repetitive sequences, of which long terminal repeats (LTRs) were an important form of repetitive sequences, accounting for 67.84% of the genome. Phylogenetic analysis reveals that L. acutangula evolved later than Luffa cylindrica, and Luffa is closely related to Momodica charantia. Comparing the genome of L. acutangula SG261 and L. cylindrica with PacBio data, 67,128 high-quality structural variations (SVs) and 55,978 presence-absence variations (PAVs) were identified in SG261, resulting in 2424 and 1094 genes with variation in the CDS region, respectively, and there are 287 identical genes affected by two different structural variation analyses. In addition, we found that the transcription factor FY (FLOWERING LOCUS Y) families had a large expansion in L. acutangula SG261 (flowering in the morning) compared to L. cylindrica (flowering in the afternoon), which may result in the early flowering time in L. acutangula SG261. This study provides valuable reference for the breeding of and pan-genome research into Luffa species.

RESUMEN

Background: This study explored the utilization of luffa sponge (LS) in enhancing acetification processes. LS is known for having high porosity and specific surface area, and can provide a novel means of supporting the growth of acetic acid bacteria (AAB) to improve biomass yield and acetification rate, and thereby promote more efficient and sustainable vinegar production. Moreover, the promising potential of LS and luffa sponge coated with κ-carrageenan (LSK) means they may represent effective alternatives for the co-production of industrially valuable bioproducts, for example bacterial cellulose (BC) and acetic acid. Methods: LS and LSK were employed as adsorbents for Acetobacter pasteurianus UMCC 2951 in a submerged semi-continuous acetification process. Experiments were conducted under reciprocal shaking at 1 Hz and a temperature of 32 °C. The performance of the two systems (LS-AAB and LSK-AAB respectively) was evaluated based on cell dry weight (CDW), acetification rate, and BC biofilm formation. Results: The use of LS significantly increased the biomass yield during acetification, achieving a CDW of 3.34 mg/L versus the 0.91 mg/L obtained with planktonic cells. Coating LS with κ-carrageenan further enhanced yield, with a CDW of 4.45 mg/L. Acetification rates were also higher in the LSK-AAB system, reaching 3.33 ± 0.05 g/L d as opposed to 2.45 ± 0.05 g/L d for LS-AAB and 1.13 ± 0.05 g/L d for planktonic cells. Additionally, BC biofilm formation during the second operational cycle was more pronounced in the LSK-AAB system (37.0 ± 3.0 mg/L, as opposed to 25.0 ± 2.0 mg/L in LS-AAB). Conclusions: This study demonstrates that LS significantly improves the efficiency of the acetification process, particularly when enhanced with κ-carrageenan. The increased biomass yield, accelerated acetification, and enhanced BC biofilm formation highlight the potential of the LS-AAB system, and especially the LSK-AAB variant, in sustainable and effective vinegar production. These systems offer a promising approach for small-scale, semi-continuous acetification processes that aligns with eco-friendly practices and caters to specialized market needs. Finally, this innovative method facilitates the dual production of acetic acid and bacterial cellulose, with potential applications in biotechnological fields.

Asunto(s)

RESUMEN

The seeds and sap of luffa [Luffa cylindrica (L.)] are usually discarded as waste. As such, this study aimed to identify the sensory properties of luffa sap (aqueous solution) and if it can be incorporated into a food item (orange juice) for added nutritional benefits and as an alternative sweetener. A sensory trial (n = 94) asked participants to evaluate a luffa sap sample and five different orange juice samples with increasing amounts of luffa sap (control [0%], 5%, 7.5%, 10%, 12.5%). The participants evaluated the samples using 9-point hedonic scales, check-all-that-apply, and an open-ended comment question. The luffa sap was described as having a mild flavor as well as woody, earthy, and floral attributes and an aftertaste. The liking scores for the orange juice with the 5% luffa sap did not significantly differ from the control. However, as the amount of luffa sap increased above 5%, the liking scores decreased and were significantly different from the control. The orange juice with luffa sap samples (7.5% and above) was associated with off-flavors, while the orange juice with 5% luffa sap and the control were associated with the attributes (sweet, fruity, orange, tropical, citrus) that increased the participants liking. Future studies should continue to investigate the sensory properties of luffa sap and its incorporation into different food products. PRACTICAL APPLICATION: This is one of the first studies to investigate the sensory properties of luffa sap with participants residing in the Western world. The luffa sap was found to be woody, earthy, bitter, and floral. It was acceptable to add luffa sap to orange juice up to 5% by volume. However, it did not increase the sweetness perception of the orange juice. At a 7.5% luffa sap addition and higher levels, off-flavors were observed in the orange juice.

Asunto(s)

RESUMEN

Mitochondria play an important role in the energy production of plant cells through independent genetic systems. This study has aimed to assemble and annotate the functions of the mitochondrial (mt) genome of Luffa cylindrica. The mt genome of L. cylindrica contained two chromosomes with lengths of 380,879 bp and 67,982 bp, respectively. Seventy-seven genes including 39 protein-coding genes, 34 tRNA genes, 3 rRNA genes, and 1 pseudogene, were identified. About 90.63% of the codons ended with A or U bases, and 98.63% of monomers contained A/T, which contributed to the high A/T content (55.91%) of the complete mt genome. Six genes (ATP8, CCMFC, NAD4, RPL10, RPL5 and RPS4) showed positive selection. Phylogenetic analysis indicates that L. cylindrica is closely related to L. acutangula. The present results provide the mt genome of L. cylindrica, which may facilitate possible genetic variation, evolutionary, and molecular breeding studies of L. cylindrica.

Asunto(s)

RESUMEN

Reducing high concentrations of pollutants such as heavy metals, pesticides, drugs, and dyes from water is an emerging necessity. We evaluated the use of Luffa cylindrica (Lc) as a natural non-conventional adsorbent to remove azo dye mixture (ADM) from water. The capacity of Lc at three different doses (2.5, 5.0, and 10.0 g/L) was evaluated using three concentrations of azo dyes (0.125, 0.250, and 0.500 g/L). The removal percent (R%), maximum adsorption capacity (Qm), isotherm and kinetics adsorption models, and pH influence were evaluated, and Fourier-transform infrared spectroscopy and scanning electron microscopy were performed. The maximum R% was 70.8% for 10.0 g L-1Lc and 0.125 g L-1 ADM. The Qm of Lc was 161.29 mg g-1. Adsorption by Lc obeys a Langmuir isotherm and occurs through the pseudo-second-order kinetic model. Statistical analysis showed that the adsorbent dose, the azo dye concentration, and contact time significantly influenced R% and the adsorption capacity. These findings indicate that Lc could be used as a natural non-conventional adsorbent to reduce ADM in water, and it has a potential application in the pretreatment of wastewaters.

Asunto(s)

RESUMEN

BACKGROUND: Luffa (Luffa spp.) is an economically important crop of the Cucurbitaceae family, commonly known as sponge gourd or vegetable gourd. It is an annual cross-pollinated crop primarily found in the subtropical and tropical regions of Asia, Australia, Africa, and the Americas. Luffa serves not only as a vegetable but also exhibits medicinal properties, including anti-inflammatory, antidiabetic, and anticancer effects. Moreover, the fiber derived from luffa finds extensive applications in various fields such as biotechnology and construction. However, luffa Fusarium wilt poses a severe threat to its production, and existing control methods have proven ineffective in terms of cost-effectiveness and environmental considerations. Therefore, there is an urgent need to develop luffa varieties resistant to Fusarium wilt. Single-plant GWAS (sp-GWAS) has been demonstrated as a promising tool for the rapid and efficient identification of quantitative trait loci (QTLs) associated with target traits, as well as closely linked molecular markers. RESULTS: In this study, a collection of 97 individuals from 73 luffa accessions including two major luffa species underwent single-plant GWAS to investigate luffa Fusarium wilt resistance. Utilizing the double digest restriction site associated DNA (ddRAD) method, a total of 8,919 high-quality single nucleotide polymorphisms (SNPs) were identified. The analysis revealed the potential for Fusarium wilt resistance in accessions from both luffa species. There are 6 QTLs identified from 3 traits, including the area under the disease progress curve (AUDPC), a putative disease-resistant QTL, was identified on the second chromosome of luffa. Within the region of linkage disequilibrium, a candidate gene homologous to LOC111009722, which encodes peroxidase 40 and is associated with disease resistance in Cucumis melo, was identified. Furthermore, to validate the applicability of the marker associated with resistance from sp-GWAS, an additional set of 21 individual luffa plants were tested, exhibiting 93.75% accuracy in detecting susceptible of luffa species L. aegyptiaca Mill. CONCLUSION: In summary, these findings give a hint of genome position that may contribute to luffa wild resistance to Fusarium and can be utilized in the future luffa wilt resistant breeding programs aimed at developing wilt-resistant varieties by using the susceptible-linked SNP marker.

Asunto(s)

RESUMEN

The plant-specific WRKY transcription factor family members have diverse regulatory effects on the genes associated with many plant processes. Although the WRKY proteins in Arabidopsis thaliana and other species have been thoroughly investigated, there has been relatively little research on the WRKY family in Luffa cylindrica, which is one of the most widely grown vegetables in China. In this study, we performed a genome-wide analysis to identify L. cylindrica WRKY genes, which were subsequently classified and examined in terms of their gene structures, chromosomal locations, promoter cis-acting elements, and responses to abiotic stress. A total of 62 LcWRKY genes (471-2238 bp) were identified and divided into three phylogenetic groups (I, II, and III), with group II further divided into five subgroups (IIa, IIb, IIc, IId, and IIe) in accordance with the classification in other plants. The LcWRKY genes were unevenly distributed across 13 chromosomes. The gene structure analysis indicated that the LcWRKY genes contained 0-11 introns (average of 4.4). Moreover, 20 motifs were detected in the LcWRKY proteins with conserved motifs among the different phylogenetic groups. Two subgroup IIc members (LcWRKY16 and LcWRKY31) contained the WRKY sequence variant WRKYGKK. Additionally, nine cis-acting elements related to diverse responses to environmental stimuli were identified in the LcWRKY promoters. The subcellular localization analysis indicated that three LcWRKY proteins (LcWRKY43, LcWRKY7, and LcWRKY23) are localized in the nucleus. The tissue-specific LcWRKY expression profiles reflected the diversity in LcWRKY expression. The RNA-seq data revealed the effects of low-temperature stress on LcWRKY expression. The cold-induced changes in expression were verified via a qRT-PCR analysis of 24 differentially expressed WRKY genes. Both LcWRKY7 and LcWRKY12 were highly responsive to the low-temperature treatment (approximately 110-fold increase in expression). Furthermore, the LcWRKY8, LcWRKY12, and LcWRKY59 expression levels increased by more than 25-fold under cold conditions. Our findings will help clarify the evolution of the luffa WRKY family while also providing valuable insights for future studies on WRKY functions.

RESUMEN

The loofah/sponge gourd Luffa cylindrica (L.), a member of the Cucurbitaceae family, is one of the neglected medicinal plants. Traditionally, Luffa cylindrica is prescribed for inducing labor. It has a long history of use in China for the treatment of fever, diabetes, dyspnea, and dysentery. This study investigated the toxicity profile of the alkaloid-rich fraction of Luffa cylindrica (ARF-LC) for the first time in Sprague Dawley rats. A total of 80 rats (40 male and 40 female rats) aged 13 weeks old and weighing 200-220 g were selected for this study. In SD rats, sub-chronic oral toxicity was investigated at doses of 100, 200, and 400 mg/kg/d for a total of 90 days, followed by a 30-day recovery period. The results showed no variation in body weight among the three dose groups compared to the control group. Treatment-related adverse events, such as alterations in hematology and serum biochemistry parameters and the histology of the liver were sporadic in the high-dose rats but within the reference range. However, these changes disappeared after the doses were withdrawn during the recovery period. In conclusion, the "no observed adverse effect level" (NOAEL) of oral administration of ARF-LC in SD rats was considered 400 mg/kg/d and can be studied for its potential in further in vivo chronic investigations.

RESUMEN

This research entails a comparison of the effectiveness of unmodified Luffa cylindrica fiber in a fully packed bed (RLCF) and NaOH-modified Luffa cylindrica fiber in another fully packed bed (MLCF) in the context of phenol removal from wastewater. Experimental data obtained through batch adsorption experiments were utilized to determine the most suitable model. It was observed that as the initial concentration of phenol increased from 100 to 500 mg/l, the maximum percentage removal increased from 63.5 to 83.1% for RLCF-PB and from 89.9 to 99.5% for MLCF-PB. The correlation coefficient (R2) was calculated for the Langmuir, Freundlich, Temkin, Harkin-Jura, Halsey, and Flory-Huggins models for both materials. The analysis revealed that the pseudo-second-order model was the most suitable, followed by the Elovich model, with the pseudo-first-order model being the least suitable. The Weber-Morris diffusion model suggested that pore diffusion was the rate-determining step, and diffusion at the border layer was determined to be endothermic, feasible, heterogeneous, and spontaneous. In summary, this study indicates that MLCF-PB is a promising material for the efficient removal of phenol from aqueous solutions.

RESUMEN

The literature rarely compiles studies devoted to the removal of pollutants in aqueous media comparing adsorption and photocatalytic degradation, and does not pay enough attention to the analysis of combined adsorption-photocatalytic oxidation processes. In the present manuscript, the removal of malachite green (MG) from aqueous solutions has been investigated in three different sustainable scenarios: i) adsorption on activated carbon (AC) derived from a residue, luffa cylindrica, ii) photocatalytic oxidation under simulated solar light using titanium dioxide (TP) and iii) combined adsorption-photocatalytic oxidation using TP-AC (70/30 wt./wt.) under simulated solar light. The study has revealed that in the three scenarios and studied conditions, the total removal of this endocrine-disrupting dye from the solution takes place in the assayed time, 2 h, in some cases just in a few minutes. MG adsorption in the AC is a very fast and efficient removal method. MG photocatalytic oxidation with TP also occurs efficiently, although the oxidized MG is not totally mineralized. MG removal using the TP-AC composite under simulated solar light occurs only slightly faster to the MG adsorption in the AC, being adsorption the dominating MG removal mechanism for TP-AC. Thus, more than 90% of the removed MG with TP-AC under simulated solar light is adsorbed in this carbon-containing composite. The obtained results highlight the interest in adsorption, being the selection of the most suitable removal method dependent on several factors (i.e., the cost of the AC regeneration, for adsorption, or the toxicity of the intermediate oxidation species, for photooxidation). Paying attention to MG photooxidation with TiO2, comparison of two working photodegradation schemes shows that the direct photodegradation of MG from solution, avoiding any initial dark equilibrium period, is more efficient from a time perspective. The use of scavengers has proved that MG photodegradation occurs via an oxidation mechanism dominated by superoxide anion radicals.

Asunto(s)

RESUMEN

In the current work, luffa was modified with silver nanoparticles to prepare LF/AgNPs adsorbent for the elimination of ketoprofen and reactive yellow 15 (RY15) from aqueous media. Various characterization techniques, including FT-IR, XRD, BET, and SEM-EDS analysis, were employed to confirm the successful modification of LF/AgNPs. Several key parameters such as contact time, adsorbent dosage, concentration, pH, and agitation technique were fine-tuned to optimize the adsorption process. Ketoprofen removal was found to be most effective in weakly acidic conditions (pH = 5), while reactive yellow 15 adsorption was enhanced in an acidic environment (pH = 2). At 298 K, the highest adsorption capacities reached 56.88 mg/g for ketoprofen and 97.76 mg/g for reactive yellow 15. In both scenarios involving the elimination of ketoprofen and RY15, the Temkin isotherm exhibits higher R2 values, specifically 0.997 for ketoprofen and 0.963 for RY15, demonstrating a strong correlation with the observed adsorption data. Additionally, the kinetics of ketoprofen adsorption were best described by the Pseudo-first order model (R2 = 0.989), whereas the Pseudo-second order model provided the most accurate fit for reactive yellow 15 adsorption (R2 = 0.997). Importantly, the LF/AgNPs adsorbent displayed consistent performance over five consecutive reuse cycles, affirming its stability and efficacy in removing both contaminants. These findings underscore the exceptional potential of LF/AgNPs as a reliable adsorbent for the removal of reactive yellow 15 and ketoprofen from aqueous solutions.

RESUMEN

This article introduces a comprehensive dataset designed for researchers to classify diseases in Luffa leaves, determine the grade of Luffa from Luffa images, and identify different growth stages throughout the year. The dataset is meticulously organized into three sections, each concentrating on specific facets of Luffa Aegyptiaca, commonly known as Smooth Luffa (Dhundol/). These images were captured in various village fields in Faridpur, Bangladesh. The sections include the assessment of Smooth Luffa quality, the identification of plant diseases, and the documentation of Luffa flowers. The dataset is divided into three sections, totaling 1933 original JPG images. The "Luffa Diseases" section features images of smooth Luffa leaves, depicting various diseases and unaffected leaves. Categories in this section encompass Alternaria Disease, Angular Spot Disease, Holed Leaves, Mosaic Virus, and Fresh Leaves, totaling 1228 JPG raw images. The "Flowers" category comprises 362 JPG raw images, showcasing different maturity stages in smooth Luffa flowers. Finally, the "Luffa Grade" section focuses on categorizing smooth Luffa into fresh and defective categories, presenting 343 JPG raw images for this purpose.

RESUMEN

Fusarium oxysporum f. sp. luffae (Folu) is a severe plant pathogen that causes vascular wilt and root rot in Luffa plants worldwide. A green fluorescent protein (GFP)-tagged isolate of Folu (Fomh16-GFP) was utilized to investigate the infection progress and colonization of Fomh16-GFP in resistant (LA140) and susceptible (LA100) Luffa genotypes. Seven days post-inoculation (dpi), it was observed that Fomh16-GFP had successfully invaded and colonized the vascular bundle of all LA100 parts, including the roots, hypocotyl, and stem. Pathogen colonization continued to increase over time, leading to the complete wilting of plants by 14-17 dpi. In LA140, the Fomh16-GFP isolate colonized the roots and hypocotyl vascular system at 7 dpi. Nevertheless, this colonization was restricted in the hypocotyl and decreased significantly, and no fungal growth was detected in the vascular system at 21 dpi. Thus, the resistant genotype might trigger a robust defense mechanism. In addition, while the pathogen was present in LA140, the inoculated plants did not exhibit any symptoms until 28 dpi. Quantitative PCR was utilized to measure the Fomh16-GFP biomass in various parts of LA100 and LA140 at different time points. The findings indicated a positive correlation between the quantity of Fomh16-GFP DNA and disease development in LA100. Alternatively, a high amount of Fomh16-GFP DNA was identified in the roots of LA140. Nonetheless, no significant correlations were found between DNA amount and disease progression in LA140. Aqueous extracts from LA140 significantly reduced Fomh16-GFP spore germination, while no significant reduction was detected using LA100 extracts.IMPORTANCEFusarium wilt of Luffa, caused by Fusarium oxysporum f. sp. luffae (Folu), causes great losses in Luffa plants worldwide. This study used a green fluorescent protein (GFP)-tagged isolate of Folu (Fomh16-GFP) to investigate the infection progress and colonization dynamics of Fomh16-GFP in the resistant and susceptible Luffa genotypes, which could be important in understanding the resistance mechanism of Folu in Luffa plants. In addition, our work highlights the correlations between DNA amount and disease progression in resistant plants using real-time PCR. We observed a positive correlation between the quantity of Fomh16-GFP DNA and disease progression in LA100, while no significant correlation was found in LA140. These results could be valuable to further investigate the resistance mechanism of Luffa genotypes against Folu. Gaining a better understanding of the interaction between Folu and Luffa plants is crucial for effectively managing Fusarium wilt and enhancing resistance in Luffa rootstock and its varieties.

Asunto(s)

Asunto(s)

RESUMEN

The need for potable water consumption in urban and suburban regions can be decreased by greywater treatment and its reuse. Utilizing natural fibers may provide sustainable solutions in addressing challenges related to water resource management. In this study, a fixed-film reactor was designed with Luffa cylindrica (an annually occurring fruit) as a bio-carrier. The lab-scale reactors were configured with and without Luffa cylindrica and were run for 90 days in fed-batch mode. Scanning electron microscopy (SEM) was performed to validate biofilm production over time. Monitoring COD, nitrogen, and total phosphate removal allowed for analysis of treatment effectiveness. Results demonstrated the treatment efficiency for the experimental reactor was 70.96%, 97.02%, 92.57%, and 81.20% for COD, nitrogen, phosphate, and anionic surfactant (AS), respectively. 16 s rRNA gene sequencing of bio-carrier and control greywater samples was carried out. Many bacteria known to break down anionic surfactants were observed, and microbial succession was witnessed in the control reactor vs. the experimental reactor samples. The three most prevalent genera in the experimental samples were Chlorobium, Chlorobaculum, and Terrimonas. However, it is crucial to underscore that additional research is essential to solidify our understanding in this domain, with this study laying the fundamental groundwork.

RESUMEN

Existing Ni2+ heavy metal ions in an aqueous medium are highly hazardous for living organisms and humans. Therefore, designing low-cost adsorbents with enhanced effectiveness is essential for removing nickel ions to safeguard public health. In this study, a novel green nanocomposite hydrogel was synthesized through the free radical solution and bulk polymerization method, and its capability to remove divalent nickel ions from aqueous media was examined. The bionanocomposite hydrogel named as SA-g-poly(AAm)/HL-CoFe2O4 was produced by grafting polyacrylamide (AAm) onto sodium alginate (SA) in the presence of a magnetic composite recognized as HL-CoFe2O4, where HL represents hydrolyzed Luffa Cylindrica. By employing FT-IR, XRD, VSM, SEM, EDX-Map, BET, DLS, HPLC, and TGA techniques, morphological evaluation and characterization of the adsorbents were carried out. The performance of the adsorption process was studied under varying operational conditions including pH, temperature, contact duration, initial concentration of pollutant ions, and adsorbent dosage. HPLC analysis proved the non-toxic structure of the bionanocomposite hydrogel. The number of unreacted acrylamide monomers within the hydrogel matrix was measured at 20.82 mg/kg. The optimum conditions was discovered to be pH = 6, room temperature, adsorbent dosage of 1 of g.L-1, initial Ni2+ concentration of 10 mg.L-1, and contact time of 100 min, and the maximum adsorption efficiency at optimal state was calculated as 70.09, 90.25, and 93.83 % for SA-g-poly (AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples, respectively. Langmuir isotherm model was in good agreement with the experimental data and the maximum adsorption capacity of SA-g-poly(AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples was calculated to be 31.37, 43.15, and 45.19 mg.g-1, respectively. The adsorption process, according to kinetic studies, follows a pseudo-second-order kinetic model. Investigations on thermodynamics also demonstrated that the process is exothermic and spontaneous. Exploring the interference effect of co-existing ions showed that the adsorption efficiency has decreased with concentration enhancement of Ca2+ and Na+ cations in aqueous medium. Furthermore, the adsorption/desorption assessments revealed that after 8 consecutive cycles, there had been no noticeable decline in the adsorption effectiveness. Finally, actual wastewater treatment outcomes demonstrated that the bionanocomposite hydrogel successfully removes heavy metal pollutants from shipbuilding industry effluent. Therefore, the findings revealed that the newly fabricated bionanocomposite hydrogel is an efficient, cost-effective, easy-separable, and green adsorbent that could be potentially utilized to remove divalent nickel ions from wastewater.

Asunto(s)

RESUMEN

Premature ovarian failure (POF) is a leading cause of women's infertility without effective treatment. The purpose of this study was to investigate the protective effects of Luffa cylindrica fermentation liquid (LF) on cyclophosphamide (CTX) -induced POF in mice and to preliminarily investigate the underlying mechanisms. Thirty-two Balb/c mice were divided into four groups randomly. One group served as the control, while the other three received CTX injections to establish POF models. A 14-day gavage of either 5 or 10 µL/g LF was administered to two LF pretreatment groups. To analyze the effects of LF, the ovarian index, follicle number, the levels of serum sex hormones, superoxide dismutase (SOD), glutathione (GSH), malondialdehyde (MDA), inflammatory factors, and apoptosis of the ovarian cells were measured. The effects of LF pretreatment on the expression of TLR4/NF-κB and apoptosis pathways were also evaluated. We found that LF pretreatment increased the ovarian index and the number of primordial and antral follicles while decreasing those of atretic follicles. LF pretreatment also increased the serum levels of estradiol (E2) and anti-Müllerian hormone (AMH), while decreasing those of luteinizing hormone (LH) and follicle-stimulating hormone (FSH). Furthermore, LF pretreatment increased the levels of SOD and GSH in the ovaries, while decreasing those of MDA, tumor necrosis factor-α (TNF-α) and interleukin-1ß (IL-1ß). LF administration reduced the amount of TUNEL+ ovarian cells and the levels of TLR4 and NF-κB P65 protein expression. In conclusion, LF has antioxidant, anti-inflammatory as well as anti-apoptotic effects against CTX-induced POF, and the inhibition of TLR4/NF-κB and apoptosis pathways may be involved in its mechanisms.

Asunto(s)