RESUMEN

Next-generation sequencing (NGS) technologies have expanded the spectrum of forensic DNA analysis by facilitating efficient and precise genotyping of a large number of genetic markers. Yet, challenges persist regarding complex sample processing and assurance of equal molar concentrations across pooled samples. Since optimal cluster density is crucial for sequencing performance, the determination of both quantity and quality is indispensable for library preparation. In this study, we investigated the application of the Agilent 2100 Bioanalyzer for library quality control, as studies for forensic approaches, particularly for highly degraded postmortem samples, are rare. Our analysis encompassed assessing total DNA concentrations, fluorescence unit (FU) values, and adapter dimer concentrations in purified DNA libraries derived from buccal swabs and tissue samples of decomposed corpses. The sensitivity study tested a serial dilution derived from buccal swabs and revealed a decrease in FU values and an increase in adapter dimers with declining DNA input concentrations. Deviations in total DNA concentrations and average peak heights between the Agilent 2100 Bioanalyzer runs indicated a lack of repeatability in data and presented challenges in accurate quantification, which was also observed in previous studies. Yet, the analysis of degraded samples from decomposed human remains has shown the ability to detect adapter dimer concentrations, which can be crucial for the quality of subsequent NGS library preparation and sequencing success. Therefore, the Agilent 2100 Bioanalyzer proves to be a valuable tool for NGS quality control.

RESUMEN

RNA sequencing (RNA-Seq) has emerged as a powerful and versatile tool for the comprehensive analysis of transcriptomes and has been widely used to investigate gene expression, copy number variation, alternative splicing, and novel transcript discovery. This chapter outlines the methodology for conducting short-read RNA-Seq, starting from RNA enrichment to library preparation and sequencing. Throughout the chapter, practical tips and best practices are provided to guide researchers in order to optimize each step of the RNA-Seq workflow. Multiple quality control steps throughout the workflow that are critical to obtain high-quality RNA-Seq data are also discussed.

Asunto(s)

RESUMEN

The article presents the several steps to be performed on a plant, fungal, insect, or soil sample to obtain DNA sequences for DNA barcode analysis. The chapter begins with a description of sample preparation including procedures for cleaning and proceeds to DNA extraction with methods adapted for the specific type of sample. Next, DNA quantification is described so the proper amount is used for the amplification of the selected barcode regions. Information is provided for reaction mixes and amplification conditions for several referenced barcode primer pairs tuned for the individual sample of interest. This is followed by a description of procedures to access the success of amplification, cleanup, and quantification of the product ready for either Sanger sequencing or library preparation for massive parallel sequencing (MPS). Finally, procedures are provided for Sanger sequencing, library preparation, and MPS sequencing. The chapter provides several references of barcode regions for different sample types.

Asunto(s)

RESUMEN

PacBio long-read sequencing is a third-generation technology that generates long reads up to 20 kilobases (kb), unlike short-read sequencing instruments that produce up to 600 bases. Long-read sequencing is particularly advantageous in higher organisms, such as humans and plants, where repetitive regions in the genome are more abundant. The PacBio long-read sequencing uses a single molecule, real-time approach where the SMRT cells contain several zero-mode waveguides (ZMWs). Each ZMW contains a single DNA molecule bound by a DNA polymerase. All ZMWs are flushed with deoxy nucleotides with a fluorophore specific to each nucleotide. As the sequencing proceeds, the detector detects the wavelength of the fluorescence and the nucleotides are read in real-time. This chapter describes the sample and library preparation for PacBio long-read sequencing for grapevine.

Asunto(s)

RESUMEN

BACKGROUND: Blood transcriptomic analysis is widely used to provide a detailed picture of a physiological state with potential outcomes for applications in diagnostics and monitoring of the immune response to vaccines. However, multi-species transcriptomic analysis is still a challenge from a technological point of view and a standardized workflow is urgently needed to allow interspecies comparisons. RESULTS: Here, we propose a single and complete total RNA-Seq workflow to generate reliable transcriptomic data from blood samples from humans and from animals typically used in preclinical models. Blood samples from a maximum of six individuals and four different species (rabbit, non-human primate, mouse and human) were extracted and sequenced in triplicates. The workflow was evaluated using different wet-lab and dry-lab criteria, including RNA quality and quantity, the library molarity, the number of raw sequencing reads, the Phred-score quality, the GC content, the performance of ribosomal-RNA and globin depletion, the presence of residual DNA, the strandness, the percentage of coding genes, the number of genes expressed, and the presence of saturation plateau in rarefaction curves. We identified key criteria and their associated thresholds to be achieved for validating the transcriptomic workflow. In this study, we also generated an automated analysis of the transcriptomic data that streamlines the validation of the dataset generated. CONCLUSIONS: Our study has developed an end-to-end workflow that should improve the standardization and the inter-species comparison in blood transcriptomics studies. In the context of vaccines and drug development, RNA sequencing data from preclinical models can be directly compared with clinical data and used to identify potential biomarkers of value to monitor safety and efficacy.

Asunto(s)

RESUMEN

Transposon directed insertion-site sequencing (TraDIS), a variant of transposon insertion sequencing commonly known as Tn-Seq, is a high-throughput assay that defines essential bacterial genes across diverse growth conditions. However, the variability between laboratory environments often requires laborious, time-consuming modifications to its protocol. In this technical study, we aimed to refine the protocol by identifying key parameters that can impact the complexity of mutant libraries. Firstly, we discovered that adjusting electroporation parameters including transposome concentration, transposome assembly conditions, and cell densities can significantly improve the recovery of viable mutants for different Escherichia coli strains. Secondly, we found that post-electroporation conditions, such as recovery time and the use of different mediums for selecting mutants may also impact the complexity of viable mutants in the library. Finally, we developed a simplified sequencing library preparation workflow based on a Nextera-TruSeq hybrid design where ~ 80% of sequenced reads correspond to transposon-DNA junctions. The technical improvements presented in our study aim to streamline TraDIS protocols, making this powerful technique more accessible for a wider scientific audience.

Asunto(s)

RESUMEN

In clinical oncology, cell-free DNA (cfDNA) has shown immense potential in its ability to noninvasively detect cancer at various stages and monitor the progression of therapy. Despite the rapid improvements in cfDNA liquid biopsy approaches, achieving the required sensitivity to detect rare tumor-derived cfDNA still remains a challenge. For next-generation sequencing, the perceived presentation of cfDNA is strongly linked to the extraction and library preparation protocols. Conventional double-stranded DNA library preparation (dsDNA-LP) focuses on assessing ~167bp double-stranded mononucleosomal (mncfDNA) and its other oligonucleosomal cell-free DNA counterparts in plasma. However, dsDNA-LP methods fail to include short, single-stranded, or nicked DNA in the final library preparation, biasing the representation of the actual cfDNA populations in plasma. The emergence of single-stranded library preparation (ssDNA-LP) strategies over the past decade has now allowed these other populations of cfDNA to be studied from plasma. With the use of ssDNA-LP, single-stranded, nicked, and ultrashort cfDNA can be comprehensively assessed for its molecular characteristics and clinical potential. In this review, we overview the current literature on applications of ssDNA-LP on plasma cfDNA from a potential cancer liquid biopsy perspective. To this end, we discuss the molecular principles of single-stranded DNA adapter ligation, how library preparation contributes to the understanding of native cfDNA characteristics, and the potential for ssDNA-LP to improve the sensitivity of circulating tumor DNA detection. Additionally, we review the current literature on the newly reported species of plasma ultrashort single-stranded cell-free DNA plasma, which appear biologically distinct from mncfDNA. We conclude with a discussion of future perspectives of ssDNA-LP for liquid biopsy endeavors.

RESUMEN

Massively parallel sequencing (MPS) technology has become the gold standard in mitochondrial DNA research due to its high sensitivity in detecting mtDNA heteroplasmy, a prognostic marker in various medical applications. Various MPS technologies and platforms used for mtDNA analysis exist. Obtaining reliable and sensitive results requires deep and uniform coverage of the entire mtDNA sequence, which is heavily influenced by the choice of library preparation method and sequencing platform. Here, we present a comparison of the sequencing coverage and the ability to heteroplasmy detection using two library preparation protocols (Nextera XT DNA Library Preparation Kit and Nextera DNA Flex Library Preparation Kit) and two different (MiSeq FGx and ISeq 100) Illumina MPS platforms. Our study indicates that the Nextera DNA Flex Library protocol provides a more balanced coverage along the mitogenome and a reliable heteroplasmy detection with both MiSeq and iSeq Illumina MPS systems.

Asunto(s)

RESUMEN

High-throughput sequencing of amplicons has been widely used to precisely and efficiently identify species compositions and analyze community structures, greatly promoting biological studies involving large amounts of complex samples, especially those involving environmental and pathogen-monitoring ones. Commercial library preparation kits for amplicon sequencing, which generally require multiple steps, including adapter ligation and indexing, are expensive and time-consuming, especially for applications at a large scale. To overcome these limitations, a "one-step PCR approach" has been previously proposed for constructions of amplicon libraries using long fusion primers. However, efficient amplifications of target genes and accurate demultiplexing of pooled sequencing data remain to be addressed. To tackle these, we present an integrative protocol for one-step PCR amplicon library construction (OSPALC). High-quality reads have been generated by this approach to reliably identify species compositions of mock bacterial communities and environmental samples. With this protocol, the amplicon library is constructed through one regular PCR with long primers, and the total cost per DNA/cDNA sample decreases to just 7% of the typical cost via the multi-step PCR approach. Empirically tested primers and optimized PCR conditions to construct OSPALC libraries for 16S rDNA V4 regions are demonstrated as a case study. Tools to design primers targeting at any genomic regions are also presented. In principle, OSPALC can be readily applied to construct amplicon libraries of any target genes using DNA or RNA samples, and will facilitate research in numerous fields. Supplementary Information: The online version contains supplementary material available at 10.1007/s42995-023-00182-1.

RESUMEN

We recently described a targeted amplicon deep sequencing (TADS) strategy that utilizes a nested PCR targeting the 18S rDNA gene of blood-borne parasites. The assay facilitates selective digestion of host DNA by targeting enzyme restriction sites present in vertebrates but absent in parasites. This enriching of parasite-derived amplicon drastically reduces the proportion of host-derived reads during sequencing and results in the sensitive detection of several clinically important blood parasites including Plasmodium spp., Babesia spp., kinetoplastids, and filarial nematodes. Despite these promising results, high costs and the laborious nature of metagenomics sequencing are prohibitive to the routine use of this assay in most laboratories. We describe and evaluate a new metagenomic approach that utilizes a set of primers modified from our original assay that incorporates Illumina barcodes and adapters during the PCR steps. This modification makes amplicons immediately compatible with sequencing on the Illumina MiSeq platform, removing the need for a separate library preparation, which is expensive and time-consuming. We compared this modified assay to our previous nested TADS assay in terms of preparation speed, limit of detection (LOD), and cost. Our modifications reduced assay turnaround times from 7 to 5 days. The cost decreased from approximately $40 per sample to $11 per sample. The modified assay displayed comparable performance in the detection and differentiation of human-infecting Plasmodium spp., Babesia spp., kinetoplastids, and filarial nematodes in clinical samples. The LOD of this modified approach was determined for malaria parasites and remained similar to that previously reported for our earlier assay (0.58 Plasmodium falciparum parasites/µL of blood). These modifications markedly reduced costs and turnaround times, making the assay more amenable to routine diagnostic applications.

Asunto(s)

RESUMEN

The technique 3' rapid amplification of cDNA ends (3' RACE) allows for detection of translocations with unknown gene partners located at the 3' end of the chimeric transcript. We composed a 3' RACE-based RNA sequencing panel for the analysis of FGFR1-4 gene rearrangements, detection of activating mutations located within FGFR1-4, IDH1/2, ERBB2 (HER2), KRAS, NRAS, BRAF, and PIK3CA genes, and measurement of the expression of ERBB2, PD-L1, and FGFR1-4 transcripts. This NGS panel was utilized for the molecular profiling of 168 biliary tract carcinomas (BTCs), including 83 intrahepatic cholangiocarcinomas (iCCAs), 44 extrahepatic cholangiocarcinomas (eCCAs), and 41 gallbladder adenocarcinomas (GBAs). The NGS failure rate was 3/168 (1.8%). iCCAs, but not other categories of BTCs, were characterized by frequent FGFR2 alterations (17/82, 20.7%) and IDH1/2 mutations (23/82, 28%). Other potentially druggable events included ERBB2 amplifications or mutations (7/165, 4.2% of all successfully analyzed BTCs) and BRAF p.V600E mutations (3/165, 1.8%). In addition to NGS, we analyzed microsatellite instability (MSI) using the standard five markers and revealed this event in 3/158 (1.9%) BTCs. There were no instances of ALK, ROS1, RET, and NTRK1-3 gene rearrangements or MET exon 14 skipping mutations. Parallel analysis of 47 iCCA samples with the Illumina TruSight Tumor 170 kit confirmed good performance of our NGS panel. In conclusion, targeted RNA sequencing coupled with the 3' RACE technology is an efficient tool for the molecular diagnostics of BTCs.

RESUMEN

Shotgun metagenomics is an increasingly cost-effective approach for profiling environmental and host-associated microbial communities. However, due to the complexity of both microbiomes and the molecular techniques required to analyze them, the reliability and representativeness of the results are contingent upon the field, laboratory, and bioinformatic procedures employed. Here, we consider 15 field and laboratory issues that critically impact downstream bioinformatic and statistical data processing, as well as result interpretation, in bacterial shotgun metagenomic studies. The issues we consider encompass intrinsic properties of samples, study design, and laboratory-processing strategies. We identify the links of field and laboratory steps with downstream analytical procedures, explain the means for detecting potential pitfalls, and propose mitigation measures to overcome or minimize their impact in metagenomic studies. We anticipate that our guidelines will assist data scientists in appropriately processing and interpreting their data, while aiding field and laboratory researchers to implement strategies for improving the quality of the generated results.

RESUMEN

Methylation sequencing is a promising approach to infer the tissue of origin of cell-free DNA (cfDNA). In this study, a single- and a double-stranded library preparation approach were evaluated with respect to their technical biases when applied on cfDNA from plasma and urine. Additionally, tissue of origin (TOO) proportions were evaluated using two deconvolution methods. Sequencing cfDNA from urine using the double-stranded method resulted in a substantial within-read methylation bias and a lower global methylation (56.0% vs. 75.8%, p ≤ 0.0001) compared to plasma cfDNA, both of which were not observed with the single-stranded approach. Individual CpG site-based TOO deconvolution resulted in a significantly increased proportion of undetermined TOO with the double-stranded method (urine: 32.3% vs. 1.9%; plasma: 5.9% vs. 0.04%; p ≤ 0.0001), but no major differences in proportions of individual cell types. In contrast, fragment-level deconvolution led to multiple cell types, with significantly different TOO proportions between the two methods. This study thus outlines potential limitations of double-stranded library preparation for methylation analysis of cfDNA especially for urinary cfDNA. While the double-stranded method allows jagged end analysis in addition to TOO analysis, it leads to significant methylation bias in urinary cfDNA, which single-stranded methods can overcome.

RESUMEN

Museum specimens collected prior to cryogenic tissue storage are increasingly being used as genetic resources, and though high-throughput sequencing is becoming more cost-efficient, whole genome sequencing (WGS) of historical DNA (hDNA) remains inefficient and costly due to its short fragment sizes and high loads of exogenous DNA, among other factors. It is also unclear how sequencing efficiency is influenced by DNA sources. We aimed to identify the most efficient method and DNA source for collecting WGS data from avian museum specimens. We analyzed low-coverage WGS from 60 DNA libraries prepared from four American Robin (Turdus migratorius) and four Abyssinian Thrush (Turdus abyssinicus) specimens collected in the 1920s. We compared DNA source (toepad versus incision-line skin clip) and three library preparation methods: (1) double-stranded DNA (dsDNA), single tube (KAPA); (2) single-stranded DNA (ssDNA), multi-tube (IDT); and (3) ssDNA, single tube (Claret Bioscience). We found that the ssDNA, multi-tube method resulted in significantly greater endogenous DNA content, average read length, and sequencing efficiency than the other tested methods. We also tested whether a predigestion step reduced exogenous DNA in libraries from one specimen per species and found promising results that warrant further study. The ~10% increase in average sequencing efficiency of the best-performing method over a commonly implemented dsDNA library preparation method has the potential to significantly increase WGS coverage of hDNA from bird specimens. Future work should evaluate the threshold for specimen age at which these results hold and how the combination of library preparation method and DNA source influence WGS in other taxa.

RESUMEN

We present an easy-to-reproduce manual miniaturized full-length RNA sequencing (RNAseq) library preparation workflow that does not require the upfront investment in expensive lab equipment or long setup times. With minimal adjustments to an established commercial protocol, we were able to manually miniaturize the RNAseq library preparation by a factor of up to 1:8. This led to cost savings for miniaturized library preparation of up to 86.1% compared to the gold standard. The resulting data were the basis of a rigorous quality control analysis that inspected: sequencing quality metrics, gene body coverage, raw read duplications, alignment statistics, read pair duplications, detected transcripts and sequence variants. We also included a deep dive data analysis identifying rRNA contamination and suggested ways to circumvent these. In the end, we could not find any indication of biases or inaccuracies caused by the RNAseq library miniaturization. The variance in detected transcripts was minimal and not influenced by the miniaturization level. Our results suggest that the workflow is highly reproducible and the sequence data suitable for downstream analyses such as differential gene expression analysis or variant calling.

Asunto(s)

RESUMEN

Circulating tumor DNA (ctDNA) was short and rare, making the detection performance of the current targeted sequencing methods unsatisfying. We developed the One-PrimER Amplification (OPERA) system and examined its performance in detecting mutations of low variant allelic frequency (VAF) in various samples with short-sized DNA fragments. In cell line-derived samples containing sonication-sheared DNA fragments with 50-150 bp, OPERA was capable of detecting mutations as low as 0.0025% VAF, while CAPP-Seq only detected mutations of >0.03% VAF. Both single nucleotide variant and insertion/deletion can be detected by OPERA. In synthetic fragments as short as 80 bp with low VAF (0.03%-0.1%), the detection sensitivity of OPERA was significantly higher compared to that of droplet digital polymerase chain reaction. The error rate was 5.9×10-5 errors per base after de-duplication in plasma samples collected from healthy volunteers. By suppressing "single-strand errors", the error rate can be further lowered by >5 folds in EGFR T790M hotspot. In plasma samples collected from lung cancer patients, OPERA detected mutations in 57.1% stage I patients with 100% specificity and achieved a sensitivity of 30.0% in patients with tumor volume of less than 1 cm3. OPERA can effectively detect mutations in rare and highly-fragmented DNA.

Asunto(s)

RESUMEN

In planarian flatworms, piRNAs and SMEDWI (Schmidtea mediterranea PIWI) proteins are both essential for the animals' impressive regenerative ability and for their survival. A knockdown of SMEDWI proteins disrupts the specification of the planarian germline and impairs stem cell differentiation, resulting in lethal phenotypes. As the molecular targets of PIWI proteins and thus their biological function are determined by PIWI-bound small RNAs, termed piRNAs (for PIWI-interacting RNAs), it is imperative to study the wealth of PIWI-bound piRNAs using next-generation sequencing-based techniques. Prior to sequencing, piRNAs bound to individual SMEDWI proteins must be isolated. To that end, we established an immunoprecipitation protocol that can be applied to all planarian SMEDWI proteins. Co-immunoprecipitated piRNAs are visualized by using qualitative radioactive 5'-end labeling, which detects even trace amounts of small RNAs. Next, isolated piRNAs are subjected to a library preparation protocol that has been optimized for the efficient capture of piRNAs, whose 3'-ends carry a 2'-O-methyl modification. Successfully prepared piRNA libraries are subjected to Illumina-based next-generation sequencing. Obtained data are analyzed as presented in the accompanying manuscript.

Asunto(s)

RESUMEN

OBJECTIVE: Metatranscriptomic analysis of RNA viromes on built-environment surfaces is hampered by low RNA yields and high abundance of rRNA. Therefore, we evaluated the quality of libraries, efficiency of rRNA depletion, and viral detection sensitivity using a mock community and a melamine-coated table surface RNA with levels below those required (< 5 ng) with a library preparation kit (NEBNext Ultra II Directional RNA Library Prep Kit). RESULTS: Good-quality RNA libraries were obtained from 0.1 ng of mock community and table surface RNA by changing the adapter concentration and number of PCR cycles. Differences in the target species of the rRNA depletion method affected the community composition and sensitivity of virus detection. The percentage of viral occupancy in two replicates was 0.259 and 0.290% in both human and bacterial rRNA-depleted samples, a 3.4 and 3.8-fold increase compared with that for only bacterial rRNA-depleted samples. Comparison of SARS-CoV-2 spiked-in human rRNA and bacterial rRNA-depleted samples suggested that more SARS-CoV-2 reads were detected in bacterial rRNA-depleted samples. We demonstrated that metatranscriptome analysis of RNA viromes is possible from RNA isolated from an indoor surface (representing a built-environment surface) using a standard library preparation kit.

Asunto(s)

RESUMEN

Unbiased metagenomic sequencing is conceptually well-suited for first-line diagnosis as all known and unknown infectious entities can be detected, but costs, turnaround time and human background reads in complex biofluids, such as plasma, hinder widespread deployment. Separate preparations of DNA and RNA also increases costs. In this study, we developed a rapid unbiased metagenomics next-generation sequencing (mNGS) workflow with a human background depletion method (HostEL) and a combined DNA/RNA library preparation kit (AmpRE) to address this issue. We enriched and detected bacterial and fungal standards spiked in plasma at physiological levels with low-depth sequencing (<1 million reads) for analytical validation. Clinical validation also showed 93% of plasma samples agreed with the clinical diagnostic test results when the diagnostic qPCR had a Ct < 33. The effect of different sequencing times was evaluated with the 19 h iSeq 100 paired end run, a more clinically palatable simulated iSeq 100 truncated run and the rapid 7 h MiniSeq platform. Our results demonstrate the ability to detect both DNA and RNA pathogens with low-depth sequencing and that iSeq 100 and MiniSeq platforms are compatible with unbiased low-depth metagenomics identification with the HostEL and AmpRE workflow.

RESUMEN

This project evaluated the prototype PowerSeq® 46GY System using donor DNA and casework-type samples. The goal of this study was to determine whether modifications to the manufacturer's protocol could increase read coverage and improve sample results. Buccal and casework-type libraries were prepared using the TruSeq® DNA PCR-Free HT kit or the KAPA HyperPrep kit. Both kits were evaluated unmodified, and by substituting AMPure® XP beads for the beads of the most optimal kit. Two qPCR kits, the PowerSeq® Quant MS System and KAPA Library Quantification Kit, were also evaluated along with a KAPA size-adjustment workbook, which was compared as a third quantification method. Libraries were sequenced using the MiSeq® FGx and data were analyzed with STRait Razor. Results suggested that all three quantification methods overestimated library concentration, but the PowerSeq kit was most accurate. Samples prepared with the TruSeq library kit provided the highest coverage and the fewest instances of dropout and below-threshold alleles compared with the KAPA kit. Additionally, all bone and hair samples demonstrated full profile completeness, with bone samples yielding a higher average coverage than hair samples. Overall, our study demonstrated that the 46GY manufacturer's protocol produced the best quality results compared to alternative library preparation options.

Asunto(s)