RESUMEN
This study presents an analysis of films which consist of two layers; one layer is PVDF as the matrix, along with fillers BaTiO3 (BT), and the second is one bacterial nanocellulose (BNC) filled with Fe3O4. The mass fraction of BT in PVDF was 5%, and the samples were differentiated based on the duration of the mechanical activation of BT. This innovative PVDF laminate polymer with environmentally friendly fillers aligns with the concept of circular usage, resulting in a reduction in plastic content and potential improvement of the piezoelectric properties of the entire composite. This work presents new, multifunctional "green" packaging materials that potentially could be a good alternative to specific popular materials used for this purpose. The synthesis of the films was carried out using the hot press method. Tensile tests, water vapor permeability examination, and structural analyses using SEM-EDS and FTIR have been conducted. The sample PVDF/BT20/BNC/Fe3O4 exhibited the best barrier properties (impermeability to water vapor), while the highest tensile strength and toughness were exhibited by the PVDF/BT5/BNC/Fe3O4 sample.
RESUMEN
In the search for environmentally friendly materials with a wide range of properties, polymer composites have emerged as a promising alternative due to their multifunctional properties. This study focuses on the synthesis of composite materials consisting of four components: bacterial nanocellulose (BNC) modified with magnetic Fe3O4, and a mixture of BaTiO3 (BT) and polyvinylidene fluoride (PVDF). The BT powder was mechanically activated prior to mixing with PVDF. The influence of BT mechanical activation and BNC with magnetic particles on the PVDF matrix was investigated. The obtained composite films' structural characteristics, morphology, and dielectric properties are presented. This research provides insights into the relationship between mechanical activation of the filler and structural and dielectric properties in the PVDF/BT/BNC/Fe3O4 system, creating the way for the development of materials with a wide range of diverse properties that support the concept of green technologies.
RESUMEN
With over 300 species worldwide, the genus Curculio Linnaeus, 1758 is a widespread, morphologically diverse lineage of weevils that mainly parasitize nuts. Females use the rostrum, an elongate cuticular extension of the head, to excavate oviposition sites. This process causes extreme bending and deformation of the rostrum, without apparent harm to the structure. The cuticle of the rostral apex exhibits substantial modifications to its composite structure that enhance the elasticity and resiliency of this structure. Here we develop finite element models of the head and rostrum for three Curculio species representing disparate North American clades and rostral morphotypes. The models were subjected to varying apical loads and to prescribed dislocation of the head capsule, with and without representing the cuticular modifications of the rostral apex. We found that the altered layer thicknesses and macrofiber orientation angles of the rostral apex fully explain the observed elasticity of the rostrum. These modifications have a synergistic effect that greatly enhances the flexibility of the rostral apex. Consequently, the cuticle composite profile of the rostral apex substantially mitigates the risk of fracture in dorso-apical flexion. Removing the cuticular modifications, in turn, causes a negative margin of safety for rostral bending, implying strong risk of catastrophic structural failure. The occipital sulci were identified as an important source of biomechanical constraint upon the elasticity of the rostrum, and exhibit the greatest risk of failure within this structure. The apical cuticle profile greatly reduced the maximum stresses and strain energy accumulated in the rostrum, thereby resulting in a positive margin of safety and reducing the risk of fracture. Our findings imply that the primary selective pressure influencing the evolution of the rostral cuticle was most likely negative selection of structural failure caused by bending. STATEMENT OF SIGNIFICANCE: Weevils are among the most diverse and evolutionarily successful animal lineages on Earth. Their success is driven in part by a structure called the rostrum, which gives weevil heads a characteristic "snout-like" appearance. Nut weevils in the genus Curculio use the rostrum to drill holes into developing fruits and nuts, into which they deposit their eggs. During oviposition this exceedingly slender structure is bent into a straightened configuration - in some species up to 90∘ - but does not suffer any damage during this process. Using finite element models of the rostra of three morphologically distinct species, we show that the Curculio rostrum is only able to withstand repeated, extreme bending because of modifications to the composite structure of the cuticle in the rostral apex. These modifications were shown previously to enhance the intrinsic toughness of the cuticle; in this study, we demonstrate that modification of the rostral cuticle also results in more evenly distributed bending stresses, further reducing the risk of fracture. This is the first time that the laminate profile, orthotropic behavior, and functional gradation of the cuticle have been incorporated into a three-dimensional finite element model of an insect cuticular structure. Our models highlight the significance of biomechanical constraint - i.e., avoidance of catastrophic structural failure - on the evolution of insect morphology.
Asunto(s)
Gorgojos , Animales , FemeninoRESUMEN
This paper describes the modeling of magnetoelectric (ME) effects for disk-type Terfenol-D (Tb0.3Dy0.7Fe1.92)/PZT (Pb(Zr,Ti)O3) laminate composite at low frequency by combining the advantages of the static elastic model and the equivalent circuit model, aiming at providing a guidance for the design and fabrication of the sensors based on magnetoelectric laminate composite. Considering that the strains of the magnetostrictive and piezoelectric layers are not equal in actual operating due to the epoxy resin adhesive bonding condition, the magnetostrictive and piezoelectric layers were first modeled through the equation of motion separately, and then coupled together with a new interface coupling factor kc, which physically reflects the strain transfer between the phases. Furthermore, a theoretical expression containing kc for the transverse ME voltage coefficient αv and the optimum thickness ratio noptim to which the maximum ME voltage coefficient corresponds were derived from the modified equivalent circuit of ME laminate, where the interface coupling factor acted as an ideal transformer. To explore the influence of mechanical load on the interface coupling factor kc, two sets of weights, i.e., 100 g and 500 g, were placed on the top of the ME laminates with the same thickness ratio n in the sample fabrication. A total of 22 T-T mode disk-type ME laminate samples with different configurations were fabricated. The interface coupling factors determined from the measured αv and the DC bias magnetic field Hbias were 0.11 for 500 g pre-mechanical load and 0.08 for 100 g pre-mechanical load. Furthermore, the measured optimum thickness ratios were 0.61 for kc = 0.11 and 0.56 for kc = 0.08. Both the theoretical ME voltage coefficient αv and optimum thickness ratio noptim containing kc agreed well with the measured data, verifying the reasonability and correctness for the introduction of kc in the modified equivalent circuit model.
RESUMEN
Carapace of Sulcata tortoise acts as a natural shield that protects the body from natural predators. The carapace consists of four layers: keratin scutes, dorsal cortex, cancellous interior and ventral cortex. This study aims to investigate the load-bearing mechanisms of the carapace by characterizing the layers, measuring their mechanical properties and relating them to the macroscopic behavior under compression and bending loads. Test results indicate the influence of layers' morphology, especially porosity and structural compositions, on the macroscopic properties of the carapace. The bending samples are simulated using a commercial finite element code as laminate composite structures with homogeneous elastic layers. The models are shown to capture the load-displacement response of the carapace in the elasticity regime under quasi-static loadings.