RESUMEN

Bacterial Cellulose (BC) offers a wide range of applications across various industries, including food, biomedical, and textiles, owing to its distinctive properties. Its unique 3D reticulated network of cellulose nanofibers, imparts excellent mechanical qualities, a high water-holding capacity, and thermal stability. Additionally, it possesses remarkable biocompatibility, biodegradability, high crystallinity, and purity. These attributes have offered significant interest in BC within both academic and industrial sectors. However, BC production is associated with high costs due to the use of expensive growth media and low yields. The study reports the potential of our indigenous isolate, Komagataeibacter saccharivorans BC-G1, as BC producer. Statistical optimization of BC production was carried out using Placket-Burman design and Central composite design, by selecting different parameters. Eight significant factors such as temperature, pH, glucose, yeast, peptone, acetic acid, incubation time and % inoculum were studies using ANOVA-based response surface methodology. Results showed that BC yield (8.5 g/L) with 1.8-fold after optimization of parameters. Maximum cellulose production (8.5 ± 1.8 g/L) was obtained using 2% glucose, 0.3% yeast extract, 0.3% peptone, 0.75% (v/v) acetic acid at pH 7.0 for 10 days of incubation with 4% inoculum at 25 °C under static culture. Main effect graph showed incubation time and acetic acid concentration as the most significant parameters affecting BC production in our study. The physicochemical characterization of produced BC was done using FTIR, XRD and SEM techniques.

Asunto(s)

RESUMEN

Bacterial nanocellulose (BNC) is a sustainable, renewable, and eco-friendly nanomaterial, which has gained great attentions in both academic and industrial fields. Two bacterial nanocellulose-producing strains (CVV and CVN) were isolated from apple vinegar sources, presenting high 16S rRNA gene sequence similarities (96%-98%) with Komagataeibacter species. The biofilm was characterized by scanning electron microscopy (SEM), revealing the presence of rod-shaped bacteria intricately embedded in the polymeric matrix composed of nanofibers of bacterial nanocellulose. FTIR spectrum and XRD pattern additionally confirmed the characteristic chemical structure associated with this material. The yields and productivities achieved during 10 days of fermentation were compared with Komagataeibacter xylinus ATCC 53524, resulting in low levels of BNC production. However, a remarkable increase in the BNC yield was achieved for CVV (690% increase) and CVN (750% increase) strains at day 6 of the fermentation upon adding 22 mM citrate buffer into the medium. This effect is mainly attributed to the buffering capacity of the modified Yakamana medium, which allowed to maintain pH close to 4.0 until day 6, though in combination with additional factors including stimulation of the gluconeogenesis pathway and citrate assimilation as a carbon source. In addition, the productivities determined for both isolated strains (0.850 and 0.917 g L-1 d-1) compare favorably to previous works, supporting current efforts to improve fermentation performance in static cultures and the feasibility of scaling-up BNC production in these systems.

RESUMEN

Adaptive laboratory evolution through 12 rounds of culturing experiments of the nanocellulose-producing bacterium Komagataeibacter hansenii ATCC 23769 in a liquid fraction from hydrothermal pretreatment of corn stover resulted in a strain that resists inhibition by phenolics. The original strain generated nanocellulose from glucose in standard Hestrin and Schramm (HS) medium, but not from the glucose in pretreatment liquid. K. hansenii cultured in pretreatment liquid treated with activated charcoal to remove inhibitors also converted glucose to bacterial nanocellulose and used xylose as carbon source for growth. The properties of this cellulose were the same as nanocellulose generated from media specifically formulated for bacterial cellulose formation. However, attempts to directly utilize glucose proved unsuccessful due to the toxic character of the lignin-derived phenolics, and in particular, vanillan and ferulic acid. Adaptive laboratory evolution at increasing concentrations of pretreatment liquid from corn stover in HS medium resulted in a strain of K. hansenii that generated bacterial nanocellulose directly from pretreatment liquids of corn stover. The development of this adapted strain positions pretreatment liquid as a valuable resource since K. hansenii is able to convert and thereby concentrate a dilute form of glucose into an insoluble, readily recovered and value-added product-bacterial nanocellulose.

Asunto(s)

RESUMEN

Bacterial cellulose (BC) is a water resistant and strong material for edible films. Previous studies have been conducted on edible films containing fruit purees, but not using BC. In this study, films with or without fruit (mango or guava) purees were prepared using different ratios of nanofibrillated BC (NFBC) to pectin. The addition of fruit purees increased water vapor permeability (in about 13-18 times), reduced tensile strength (in more than 90%) and modulus (in about 99%), and increased elongation (in about 13 times), due to plasticizing effects of fruit sugars and matrix dilution by the purees. The partial or total replacement of pectin with NFBC resulted in improved physical properties, making the films stronger, stiffer, more resistant to water, and with enhanced barrier to water vapor. Fruit containing films based on pectin are suggested for sachets, whereas applications for food wrapping or coating may benefit from the use of NFBC.

RESUMEN

The production and crystallinity of 13C bacterial cellulose (BC) was examined in static culture of Komagataeibacter xylinus with different chemical and physical stimuli: the addition of NaCl or cloramphenicol as well as exposure to a magnetic field or to UV light. Crystalline BC biosynthesized under each stimulus was studied by XRD and solid state 13C NMR analyses. All treatments produced BC with enhanced crystallinity over 90% (XRD) and 80% (NMR) compared to the control (83 and 76%, respectively) or to Avicel (77 and 62%, respectively). The XRD data indicated that the crystallite size was 80-85 Å. Furthermore, changes on the allomorphs (Iα and Iß) ratio tendency of BC samples addressed to the stimuli were estimated using the C4 signal from 13C NMR data. These results showed a decrease of the allomorph Iα (3%) when BC was biosynthesized with UV light and chloramphenicol compared to control (58.79%). In contrast, the BC obtained with NaCl increased up to 60.31% of the Iα allomorph ratio.

Asunto(s)

RESUMEN

Bacterial cellulose (BC) is a polymer obtained by fermentation with microorganism of different genera. Recently, new producer species have been discovered, which require identification of the most important variables affecting cellulose production. In this work, the influence of different carbon sources in BC production by a novel low pH-resistant strain Komagataeibacter medellinensis was established. The Hestrin-Schramm culture medium was used as a reference and was compared to other media comprising glucose, fructose, and sucrose, used as carbon sources at three concentrations (1, 2, and 3% w/v). The BC yield and dynamics of carbon consumption were determined at given fermentation times during cellulose production. While the carbon source did not influence the BC structural characteristics, different production levels were determined: glucose > sucrose > fructose. These results highlight considerations to improve BC industrial production and to establish the BC property space for applications in different fields.

RESUMEN

A strain isolated from Kombucha tea was isolated and used as an alternative bacterium for the biosynthesis of bacterial cellulose (BC). In this study, BC generated by this novel bacterium was compared to Gluconacetobacter xylinus biosynthesized BC. Kinetic studies reveal that Komagataeibacter rhaeticus was a viable bacterium to produce BC according to yield, thickness and water holding capacity data. Physicochemical properties of BC membranes were investigated by UV-vis and Fourier transform infrared spectroscopies (FTIR), thermogravimetrical analysis (TGA) and X-ray diffraction (XRD). Additionally, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were also used for morphological characterization. Mechanical properties at nano and macroscale were studied employing PeakForce quantitative nanomechanical property mapping (QNM) and dynamic mechanical analyzer (DMA), respectively. Results confirmed that BC membrane biosynthesized by Komagataeibacter rhaeticus had similar physicochemical, morphological and mechanical properties than BC membrane produced by Gluconacetobacter xylinus and can be widely used for the same applications.

Asunto(s)