RESUMEN

With progress in technology, soaring demand for lithium (Li) has led to its release into the environment. This study demonstrated the mitigation of the adverse effects of Li stress on tomato (Solanum lycopersicum L.) by the application of waste materials, namely coconut shell biochar (CBC) and steel slag (SS). To explore the impact of Li treatment on tomato plants different morphological, biochemical parameters and plant defense system were analyzed. Tomato plants exposed to Li had shorter roots and shoots, lower biomass and relative water contents, and showed decreases in physiological variables, as well as increases in electrolyte leakage and lipid peroxidation. However, the application of CBC and SS as passivators, either singly or in combination, increased growth variables of tomato and relieved Li-induced oxidative stress responses. The combined CBC and SS amendments reduced Li accumulation 82 and 90% in tomato roots and shoots, respectively, thereby minimizing the negative impacts of Li. Antioxidant enzymes SOD, CAT, APX and GR reflected 4, 5, 30, and 52% and glyoxalase enzymes I and II 7 and 250% enhancement in presence of both CBC and SS in Li treated soil, with a concurrent decrease in methylglyoxal content. Lithium treatment triggered oxidative stress, increased enzymatic and non-enzymatic antioxidant levels, and induced the synthesis of thiols and phytochelatins in roots and shoots. Hence, co-amendment with CBC and SS protected tomato plants from Li-induced oxidative damage by increasing antioxidant defenses and glyoxalase system activity. Both CBC, generated from agricultural waste, and SS, an industrial waste, are environmentally benign, safe, economical, and non-hazardous materials that can be easily applied on a large scale for crop production in Li-polluted soils. The present findings highlight the novel reutilization of waste materials as renewable assets to overcome soil Li problems and emphasize the conversion of waste into wealth and its potential for practical applications.

Asunto(s)

RESUMEN

In this study, a variety of probiotic strains, including Lactiplantibacillus plantarum, Lacticaseibacillus casei, Lactobacillus acidophilus, Streptococcus thermophilus, Bifidobacterium longum, Limosilactobacillus reuteri, Lactobacillus delbrueckii subsp. bulgaricus, Lacticaseibacillus rhamnosus, and Bifidobacterium bifidum, were utilized for soymilk fermentation both as free cells and as synbiotics on agro-industrial residuals such as okara, whey protein, banana peels, apple pomace, sugarcane bagasse, orange peels, and lemon peels. Among these, Lacticaseibacillus rhamnosus emerged as the most significant strain for soymilk fermentation, exhibiting a viability of 10.47 log cfu/mL, a pH of 4.41, total acidity of 1.12%, and organic acid contents (lactic and acetic acid) of 11.20 and 7.50 g/L, respectively. As a synbiotic Lacticaseibacillus rhamnosus immobilised on okara, showed even more impressive results, with a viability of 12.98 log cfu/mL, a pH of 4.31, total acidity of 1.27%, and organic acid contents of 13.90 and 9.30 g/L, respectively. Over a 12-h fermentation period, cell viability values increased by 10.47-fold in free cells and 11.19-fold in synbiotics. Synbiotic supplementation of fermented soymilk proved more beneficial than free cells in terms of viability, acidity, and organic acid content. Furthermore, when synbiotic fermented soymilk was freeze-dried to simulate the digestive system in vitro, synbiotics and freeze-dried cells demonstrated superior gastrointestinal tract survival compared to free cells. Both the probiotic bacteria and the synbiotics exhibited cytotoxicity against colon and liver cancer cell lines, with half-maximal inhibitory concentrations ranging from 41.96 to 61.52 µL/well.

Asunto(s)

RESUMEN

Acerola by-products (AB) have been used as raw material for extracting active compounds; however, there were no studies related to the use of the remaining acerola by-product (RAB) from this extraction. This portion still has fibers and can be used for the production of cellulose nanofibrils (CNFs); therefore, the main objective of this study was to evaluate the production of CNFs using AB and RAB and to investigate whether the extraction can be a treatment step before bleaching/acid hydrolysis. AB and RAB were characterized before and after being chemically treated (AB_CT and RAB_CT, respectively). The fibers extracted from the RAB showed the highest cellulose contents (RAB: 36.6 % and RAB_CT: 69.9 %), suggesting that the extraction process had an impact on by-product defibrillation. The same trends were observed for CNFs produced by acid hydrolysis. CNFs based on RAB showed higher yield (CNF_RAB: 25.2 % and CNF_RAB_CT: 24.2 %), higher crystallinity index (CNF_RAB: 68.3 % and CNF_RAB_CT: 71.7 %) and higher thermal stability compared to CNFs extracted from AB and AB_CT. This study proved that it is feasible to use by-products after removing the active compounds for CNF production without other pre-treatments or in association with chemical treatment to obtain more crystalline and thermally stable CNFs.

Asunto(s)

RESUMEN

The importance of bioactive compounds in agro-industrial by-products of plant origin lies in their direct impacts on human health. These compounds have been shown to possess antioxidant, anti-inflammatory, and antimicrobial properties, contributing to disease prevention and strengthening the immune system. In particular, the antimicrobial action of these compounds emerges as an important tool in food preservation, providing natural alternatives to synthetic preservatives and contributing to combating antimicrobial resistance. Using agro-industrial by-products of plant origin not only addresses the need to reduce waste and promote sustainability but also inaugurates a new era in the formulation of functional foods. From fruit peels to pulps and seeds, these by-products are emerging as essential ingredients in the creation of products that can promote health. Continued research in this area will unveil new applications and properties of these by-products and open doors to a food paradigm in which health and sustainability converge, paving the way to a healthier and more equitable future. The present review presents an overview of our knowledge of agro-industrial by-products and some of their more relevant health-promoting bioactivities.

Asunto(s)

RESUMEN

The routine dredging of waterways produces huge volumes of sediments. Handling contaminated dredged sediments poses significant and diverse challenges around the world. In recent years, novel and sustainable ex situ remediation technologies for contaminated sediments have been developed and applied. This review article focuses on cement-based binders in stabilizing contaminants through the stabilization/solidification (S/S) technique and the utilization of contaminated sediments as a resource. Through S/S techniques, heavy metals can be solidified and stabilized in dense and durable solid matrices, reducing their permeability and restricting their release into the environment. Industrial by-products like red mud (RM), soda residue (SR), pulverized fly ash (PFA), and alkaline granulated blast furnace slag (GGBS) can immobilize heavy metal ions such as lead, zinc, cadmium, copper, and chromium by precipitation. However, in a strong alkali environment, certain heavy metal ions might dissolve again. To address this, immobilization in low pH media can be achieved using materials like GGBS, metakaolin (MK), and incinerated sewage sludge ash (ISSA). Additionally, heavy metals can be also immobilized through the formation of silicate gels and ettringites during pozzolanic reactions by mechanisms such as adsorption, ion exchanges, and encapsulation. It is foreseeable that, in the future, the scientific community will increasingly turn towards multidisciplinary studies on novel materials, also after an evaluation of the effects on long-term heavy metal stabilization.

RESUMEN

Industrial activities contribute to environmental pollution, particularly through unregulated effluent discharges, causing adverse effects on ecosystems. Vegetable oils, as insoluble substances, exacerbate this pollution, forming impermeable films and affecting the oxygen transfer, leading to serious habitat disruption. Organic wastes, such as soybean texturized waste, spent mushroom substrate, and stabilized poultry litter, were assessed for their efficacy in enhancing the degradation of vegetable oil in contaminated soil. For this purpose, contaminated soil was amended with each of the wastes (10% w/w) using microcosm systems, which were monitored physico-chemically, microbiologically and toxicologically. Results indicate that the wastes promoted significant oil degradation, achieving 83.1, 90.7, and 86.2% removal for soybean texturized waste, spent mushroom substrate, and stabilized poultry litter, respectively, within a 90-day period. Additionally, they positively influenced soil microbial activity, as evidenced by increased levels of culturable microorganisms and hydrolytic microbial activity. While bioassays indicated no phytotoxicity in most cases, soybean texturized waste exhibited inhibitory effects on seed germination and root elongation of Lactuca sativa. This study significantly enhances our comprehension of remediation techniques for sites tainted with vegetable oils, highlighting the critical role of organic waste as eco-friendly agents in soil restoration. Emphasizing the practical implications of these findings is imperative to underscore the relevance and urgency of addressing vegetable oil contamination in soil. Moving forward, tailored strategies considering both contaminant characteristics and soil ecosystem traits are vital for ensuring effective and sustainable soil remediation.

Asunto(s)

RESUMEN

This study aimed to provide an updated critical review of the nutritional, therapeutic, biotechnological, and environmental aspects involved in the exploitation of Chenopodium quinoa Willd and its biowastes. Special attention was devoted to investigations of the therapeutic and nutritional properties of different parts and varieties of quinoa as well as of the use of the biowaste resulting from the processing of grain. Studies published from 2018 onward were prioritized. Extracts and fractions obtained from several Chenopodium quinoa matrices showed antioxidant, antidiabetic, immunoregulatory, neuroprotective, and antimicrobial effects in in vitro and in vivo models and some clinical studies. The activities were attributed to the presence of phytochemicals such as polyphenols, saponins, peptides, polysaccharides, and dietary fibers. Quinoa wastes are abundant and low-cost sources of bioactive molecules for the development of new drugs, natural antioxidants, preservatives, dyes, emulsifiers, and carriers for food and cosmetics applications. Among the demands to be fulfilled in the coming years are the following: (1) isolation of new bioactive phytochemicals from quinoa varieties that are still underexploited; (2) optimization of green approaches to the sustainable recovery of compounds of industrial interest from quinoa by-products; and (3) well-conducted clinical trials to attest safety and efficacy of extracts and compounds.

Asunto(s)

RESUMEN

Mycelium-based bio-composites (MBCs) represent a sustainable and innovative material with high potential for contemporary applications, particularly in the field of modern interior design. This research investigates the fabrication of MBCs for modern interior materials using agro-industrial wastes (bamboo sawdust and corn pericarp) and different fungal species. The study focuses on determining physical properties, including moisture content, shrinkage, density, water absorption, volumetric swelling, thermal degradation, and mechanical properties (bending, compression, impact, and tensile strength). The results indicate variations in moisture content and shrinkage based on fungal species and substrate types, with bamboo sawdust exhibiting lower shrinkage. The obtained density values range from 212.31 to 282.09 kg/m3, comparable to traditional materials, suggesting MBCs potential in diverse fields, especially as modern interior elements. Water absorption and volumetric swelling demonstrate the influence of substrate and fungal species, although they do not significantly impact the characteristics of interior decoration materials. Thermal degradation analysis aligns with established patterns, showcasing the suitability of MBCs for various applications. Scanning electron microscope observations reveal the morphological features of MBCs, emphasizing the role of fungal mycelia in binding substrate particles. Mechanical properties exhibit variations in bending, compression, impact, and tensile strength, with MBCs demonstrating compatibility with traditional materials used in interior elements. Those produced from L. sajor-caju and G. fornicatum show especially promising characteristics in this context. Particularly noteworthy are their superior compression and impact strength, surpassing values observed in certain synthetic foams multiple times. Moreover, this study reveals the biodegradability of MBCs, reaching standards for environmentally friendly materials. A comprehensive comparison with traditional materials further supports the potential of MBCs in sustainable material. Challenges in standardization, production scalability, and market adoption are identified, emphasizing the need for ongoing research, material engineering advancements, and biotechnological innovations. These efforts aim to enhance MBC properties, promoting sustainability in modern interior applications, while also facilitating their expansion into mass production within the innovative construction materials market.

RESUMEN

This study investigates our hypothesis that how effect of arsenic stress on okra (Abelmoschus esculentus L.) can be alleviated through the use of waste materials such as steel slag (SS) and corncob biochar (BC). Different growth variables, biochemical parameters, oxidative stress markers, enzymatic and non-enzymatic antioxidants and glyoxylase enzyme activities were assessed. When okra was exposed to As, there was a noticeable decrease in seedling length, biomass, relative water content, various biochemical attributes, however, electrolyte leakage and lipid peroxidation in okra were enhanced. The supplementation of SS and BC-either individually or in combination-improved the growth parameters and reduced oxidative stress markers. Application of SS and BC also lowered As accumulation in roots and shoots of okra mitigating adverse effects of As exposure. Additionally, the activities of antioxidant and glyoxalase enzyme increased when SS and BC were present, concurrently reducing methylglyoxal content. Arsenic-induced stress led to oxidative damage, an enhancement in both enzymatic and non-enzymatic antioxidants, induced the synthesis of thiol and phytochelatins in roots and shoots. These may play a vital function in alleviating oxidative stress induced by As. Superoxide dismutase, catalase, ascorbate peroxidase, and glutathione reductase activities were significantly enhanced in As-treated plants. These enhancement were further amplified when SS and BC were amended to As-treated okra. Therefore, synergistic application of SS and BC effectively protects okra against oxidative stress induced by As by increasing both antioxidant defense and glyoxalase systems. Both SS, an industrial byproduct, and BC, generated from agricultural waste, are cost-effective, environmentally friendly, safe, and non-toxic materials which can be used for crop production in As contaminated soil.

Asunto(s)

RESUMEN

Coffee is a crop of significant socioeconomic importance, and the reuse of agri-food by-products and biowaste has great potential across several industries. Coffee wastewater (CWW) is a valuable resource containing essential nutrients that can be utilized by Candida sorboxylosa for single-cell protein (SCP) production. This utilization contributes to mitigating the negative impacts of agro-industrial waste. The optimization of culture conditions using the design of experiments (DoE) technique is crucial in understanding the environmental factors influencing metabolite production. In our study, the DoE technique was employed to analyze culture conditions, including room temperature, pH 8.4, agitation at 200 rpm, a headspace of 60% (v/v), and an inoculum of 0.75 DO600nm over 28-h period. This approach resulted in a remarkable SCP yield of 64.4% and dry cell weight (DCW) of 2.26 g/L. It is noteworthy that there is no literature reporting SCP production under alkaline pH conditions in yeast. Interestingly, our work demonstrated that an alkaline pH of 8.4 significantly influenced SCP production by C. sorboxylosa. The DoE technique proved to be an efficient statistical tool for optimizing culture conditions, offering several advantages, such as: (i) conducting cultures at room temperature to minimize unnecessary energy consumption; (ii) reducing the incubation time from 46 to 28 h, thereby enhancing overall productivity; (iii) achieving 1.7-fold increase in SCP yield compared to previous basal production levels.

Asunto(s)

RESUMEN

Sustainable zero cement-based one-part ambient cured alkali-activated engineered composites (AAECs) are developed. The durability and microstructural characteristics of developed AAECs using 2% v/v polyvinyl alcohol (PVA) fibers, silica sand, binary or ternary combinations of precursors (fly ash class C 'FA-C', fly ash class F 'FA-F' and ground granulated blast furnace slag 'GGBFS') and two types of powder form alkaline reagents (Type 1 and Type 2) are evaluated compared to conventional engineered cementitious composites (ECCs) and alkali-activated mortars (AAMs) without fiber. AAECs developed satisfactory compressive strength ranging from 34 MPa to 46 MPa. Expansion/shrinkage and mass change (loss/gain) behaviors are affected by binary/ternary combination of source materials, reagent types and curing regimes (water or ambient) for both AAMs and AAECs. The binary (FA-C + GGBFS) and reagent 2 (calcium hydroxide + sodium sulfate) composites demonstrated lower shrinkage due to formation of crystalline C-A-S-H/C-S-H binding phases than their ternary (FA-C + FA-F + GGBFS) and reagent 1 (calcium hydroxide + sodium metasilicate) counterparts which formed amorphous N-C-A-S-H/N-A-S-H phases. The matrix densification due to the formation of reaction products and fiber-induced micro-confinement leads to lower shrinkage and mass change of AAECs compared to their AAM counterparts. Composites exhibited lower or comparable secondary sorptivity indices compared to control ECC, indicating their superior permeation performance. All AAECs had a relative dynamic modulus of elasticity (RDME) greater than 90% at 300 cycles (comparable to control ECC), exhibiting satisfactory freeze-thaw resistance with reagent 2 mixes showing better performance compared to those with reagent 1. The production feasibility of strain hardening AAECs with powder form reagents having satisfactory mechanical and durability properties is confirmed.

RESUMEN

Microbial surfactants are green molecules with high surface activities having the most promising advantages over chemical surfactants including their ability to efficiently reducing surface and interfacial tension, nontoxic emulsion-based formulations, biocompatibility, biodegradability, simplicity of preparation from low cost materials such as residual by-products and renewable resources at large scales, effectiveness and stabilization under extreme conditions and broad spectrum antagonism of pathogens to be part of the biocontrol strategy. Thus, biosurfactants are universal tools of great current interest. The present work describes the major types and microbial origin of surfactants and their production optimization from agro-industrial wastes in the batch shake-flasks and bioreactor systems through solid-state and submerged fermentation industries. Various downstream strategies that had been developed to extract and purify biosurfactants are discussed. Further, the physicochemical properties and functional characteristics of biosurfactants open new future prospects for the development of efficient and eco-friendly commercially successful biotechnological product compounds with diverse potential applications in environment, industry, biomedicine, nanotechnology and energy-saving technology as well.

HighlightsBiosurfactants are important biotechnological products with unique superior potentials over their synthetic counterparts.Physiological roles of biosurfactants in survival of the producing microorganisms under unfavorable conditions.Classification of biosurfactants.Biosurfactant types produced by yeasts, fungi and bacteria.Production efficiency optimization of biosurfactants.Utilization of agro-industrial wastes as economic renewable substrates for biosurfactants production.Production of biosurfactants by solid-state and submerged fermentation industries.Potential applications of biosurfactants in environment.Glycolipid biosurfactants efficiently control pathogens causing their membrane disruption.Potential application of biosurfactants in the oil industry.Natural surfactants are novel capping and stabilizing agents for nanoparticles synthesis.

RESUMEN

This experiment aimed to understand the recycled industrial biocompost interaction with fertilizers doses on soil nutrient dynamics, soil organic carbon (SOC) fraction indexes, microbial population, positive ecosystem services, carbon dioxide (CO2) societal values and economy in wheat (Triticum aestivum L.)-rice (Oryza sativa L.) production. Based on the field and lab data, a significant interaction was observed between the biocompost and fertilizer levels; the fertilizer doses (FD)3 × biocompost (BC)1 were observed 80.6 grain and 56.0% higher straw yield in the wheat-rice crops than FD0 × BC9. Based on the results of soil organic carbon (SOC), the treatment FD3 × BC1 was observed more very labile (5.06 g kg-1) and moderately labile (4.26 g kg-1) carbon (C) fractions. However, C liability and recalcitrant indexes were recorded as non-significant. Further, the interaction effects of FD3 × BC1 found 65.7% more CO2 sequestration over FD0 × BC9. In terms of microbial dynamics, at 45 days after sowing (DAS), the treatment FD3 × BC4 was found to be the highest soil bacteria (56.6 × 107), fungi (32.3 × 105), and actinomycetes (49.1 × 106 cfu g-1) population. Further, regarding ecosystem services, the FD3 × BC1 found a maximum of US$ 1236 and 322 ha-1 year-1 grain and straw-based ecosystem services, respectively. However, the treatment FD3 × BC1 observed the maximum societal value (US$ 2041 ha-1). In contrast, higher economic values of 77.9 and 138.8% gross and net returns were recorded in the FD3 × BC1 compared to FD0 × BC9 in the wheat-rice cropping sequence (WRCS), respectively. Therefore, the study's hypothesis was to know the impact of the biocompost with fertilizers doses to enhance the nutrient and microbial dynamics, increasing SOC fractions (active and passive) and pools, CO2 sequestration, and restoring the soil health in the WRCS.

Asunto(s)

RESUMEN

In this work production of l-threonine by Escherichia coli ATCC® 21277™ has been studied using a mixture of alternative low-cost substrates, which are recognized to be a major pollution problem. Whey was used as the primary carbon source, whereas Red Tilapia (Oreochromis sp.) viscera hydrolysates constituted the nitrogen source. A Box-Behnken Design was used for optimizing l-threonine and biomass production, using temperature and glucose, whey, and Red Tilapia (Oreochromis sp.) viscera hydrolysate contents as factors. Results indicate that biomass production is affected by the concentration of hydrolysate and temperature. On the other hand, l-threonine production is affected by concentration of whey, hydrolysate, and temperature. In this context, it was possible to maximize l-threonine production, but with a detriment on biomass production. The optimal conditions for biomass and l-threonine maximization (after 24 h) were identified and validated experimentally, resulting in biomass and l-threonine production of 0.767 g/L and 0.406 g/L, respectively. This work has shown the technical feasibility of using whey and Red Tilapia (Oreochromis sp.) viscera hydrolysates for the production of l-threonine by E. coli ATCC® 21277TM. Finally, the complications associated to the use of these low-cost complex substrates for the production of l-threonine by E. coli, suggest that more in detail studies (i.e. at the metabolic level) are required in order to propose strategies to increase the process productivity, before its scale up. This is a first step in our long-term goal of developing a production process for i) dealing with the pollution problems caused by those wastes, and ii) strengthen the milk and fish industries which are important poles of the Colombian economy.

RESUMEN

Producing biomass briquettes from industrial solid wastes is a more environmentally friendly way to provide alternative energy and is essential for Ethiopia to satisfy its growing energy needs while also ensuring efficient waste management in the expansion of industrial parks. The main objective of this study is to produce biomass briquettes from a mixture of textile sludge and cotton residue using avocado peels as a binder. Textile solid waste, avocado peels, and sludge were dried, carbonized, and turned into powder to make briquettes. Briquettes made from the mixture of industrial sludge and cotton residue were combined in various ratios: 100:0, 90:10, 80:20, 70:30, 60:40, and 50:50 with the same amount of the binder. Briquettes were then made using a hand press mold followed by sun-drying for two weeks. The moisture content, calorific value, briquette density, and burning rate of biomass briquettes ranged from 5.03 to 8.04%, 11.19 to 17.2 MJ/kg, 0.21 to 0.41 g/cm3, and 2.92 to 8.75 g/min, respectively. The results revealed that the briquette produced from a 50:50 ratio of industrial sludge to cotton residue was the most efficient. The inclusion of avocado peels as a binder enhanced the briquette's binding and heating properties. Thus, the findings suggested that mixing various industrial solid wastes with fruit wastes could be an effective means of making sustainable biomass briquettes for domestic purposes. Additionally, it can also promote proper waste management and provide young people with employment prospects.

Asunto(s)

RESUMEN

Alkali-activated engineered composites (AAECs) are cement-free composites developed using alkali activation technology, which exhibit strain hardening and multiple micro-cracking like conventional engineered cementitious composites (ECCs). Such AAECs are developed in this study by incorporating 2% v/v polyvinyl alcohol (PVA) fibers into alkali-activated mortars (AAMs) produced using binary/ternary combinations of fly ash class C (FA-C), fly ash class F (FA-F), and ground-granulated blast furnace slag (GGBFS) with powder-form alkaline reagents and silica sand through a one-part mixing method under ambient curing conditions. The mechanical and microstructural characteristics of eight AAECs are investigated to characterize their strain-hardening performance based on existing (stress and energy indices) and newly developed tensile/flexural ductility indices. The binary (FA-C + GGBFS) AAECs obtained higher compressive strengths (between 48 MPa and 52 MPa) and ultrasonic pulse velocities (between 3358 m/s and 3947 m/s) than their ternary (FA-C + FA-F + GGBFS) counterparts. The ternary AAECs obtained a higher fracture energy than their binary counterparts. The AAECs incorporating reagent 2 (Ca(OH)2: Na2SO4 = 2.5:1) obtained a greater fracture energy and compressive strengths than their counterparts with reagent 1 (Ca(OH)2: Na2SiO3.5H2O = 1:2.5), due to additional C-S-H gel formation, which increased their energy absorption for crack propagation through superior multiple-cracking behavior. A lower fracture and crack-tip toughness facilitated the development of enhanced flexural strength characteristics with higher flexural strengths (ranging from 5.3 MPa to 11.3 MPa) and a higher energy ductility of the binary AAMs compared to their ternary counterparts. The tensile stress relaxation process was relatively gradual in the binary AAECs, owing to the formation of a more uniform combination of reaction products (C-S-H/C-A-S-H) rather than a blend of amorphous (N-C-A-S-H/N-A-S-H) and crystalline (C-A-S-H/C-S-H) binding phases in the case of the ternary AAECs. All the AAECs demonstrated tensile strain-hardening characteristics at 28 days, with significant improvements from 28% to 100% in the maximum bridging stresses for mixes incorporating 40% to 45% GGBFS at 365 days. This study confirmed the viability of producing green cement-free strain-hardening alkali-activated composites with powder-form reagents, with satisfactory mechanical characteristics under ambient conditions.

RESUMEN

The study aimed to manage industrial wastes and create a module for using compost from waste for crops cultivation to conserve energy, reduce fertilizer use and Greenhouse gas (GHG) emissions, and improve the atmospheric CO2 capturing in agriculture for a green economy. In the main-plot, the experiment's results using NS3 found 50.1 and 41.8 % more grain yield and total carbon dioxide (CO2) sequestration in the wheat-rice cropping sequence, respectively, compared to the NS0. Moreover, the treatment CW + TV in the sub-plot observed 24.0 and 20.3 % higher grain yield and total CO2 sequestration than B + PS. Based on interaction, the NS3× CW + TV resulted in a maximum total CO2 sequestration and C credit of 47.5 Mg ha-1 and US$ 1899 ha-1, respectively. Further, it was 27.9 % lower in carbon footprints (CFs) than NS1 × B + PS. Regarding another parameter, the treatment NS3 observed a 42.4 % more total energy output in the main-plot than that of NS0. Further, in the sub-plot, the treatment CW + TV produced 21.3 % more total energy output than B + PS. Energy use efficiency (EUE) and net energy return in the interaction of NS3× CW + TV were 20.5 and 138.8 % greater than the NS0 × B + PS, respectively. In the main-plot, the treatment NS3 obtained a maximum of 585.0 MJ US$-1 and US$ 0.24 MJ-1 for energy intensity in economic terms (EIET) and eco-efficiency index in terms of energy (EEIe), respectively. While in the sub-plot, the CW + TV was observed at a maximum of 571.52 MJ US$-1 and US$ 0.23 MJ-1 EIET and EEIe, respectively. The correlation and regression study showed a perfect positive correlation between grain yield and total C output. Moreover, a high positive correlation (0.75 to 1) was found with all other energy parameters for grain energy use efficiency (GEUE). The variability in the wheat-rice cropping sequence's energy profitability (EPr) was 53.7 % for human energy profitability (HEP). Based on principal component analysis (PCA), the eigenvalues of the first two principal components (PCs) had been greater than two, explaining 78.4 and 13.7 % of the variability. The experiment hypothesis was to develop a reliable technology for safely using industrial waste compost, minimizing energy consumption and CO2 emissions by reducing chemical fertilizer input in agriculture soils.

Asunto(s)

RESUMEN

Zinc oxide nanoparticles (ZnO-NPs) have in recent times shown effective adsorption capability for the confiscation of colour contaminants from aqueous environments (aquatic ecosystems or water bodies) due to the fact that ZnO contains more functional groups. Direct blue 106 (DB106) dye was selected for this present study as a model composite due to its wide range of uses in textiles (cotton and wools), woods, and paper industries, as well as their therapeutic applications, along with its potential for impairments. This study therefore focuses on the use of DB106 dye as a model composite due to its wide range of uses in textiles (cotton and wools), woods, and paper industries, as well as their therapeutic applications and their potential for impairments. Furthermore, the surface functionalization, shape, and composite pore size were revealed by TEM, FTIR, UV, and BET techniques. The current study uses green synthesis method to prepare ZnO-NPs as an adsorbent for the DB106 dye molecules adsorption under various conditions using the batch adsorption process. The adsorption of DB106 dye to the ZnO-NPs biosorbent was detected to be pH-dependent, with optimal adsorption of DB106 (anionic) dye particles observed at pH 7. DB106 dye adsorption to the synthesized ZnO-NPs adsorbent was distinct by means of the linearized Langmuir (LNR) and pseudo-second-order (SO) models, with an estimated maximum adsorption capacity (Qm) of 370.37 mg/g.

Asunto(s)

RESUMEN

BACKGROUND: The production of biopolymers from waste resources is a growing trend, especially in high-population countries like Egypt. Beta-glucan (ß-glucan) belongs to natural polysaccharides that are derived from plant and microbial origins. In this study, following increasing demands for ß-glucan owing to its bioactive properties, a statistical model to enhance microbial ß-glucan production was evaluated for its usefulness to the food and pharmaceutical industries. In addition, a trial to convert ß-glucan polymer to nanostructure form was done to increase its bioactivity. RESULTS: Ingredients of low-cost media based on agro-industrial wastes were described using Plackett-Burman and central composite design of response surface methodology for optimizing yeast ß-glucan. Minerals and vitamin concentrations significantly influenced ß-glucan yield for Kluyveromyces lactis and nitrogen and phosphate sources for Meyerozyma guilliermondii. The maximum predicted yields of ß-glucan recovered from K. lactis and M. guilliermondii after optimizing the medium ingredients were 407 and 1188 mg/100 ml; respectively. For the first time, yeast ß-glucan nanoparticles (ßGN) were synthesized from the ß-glucan polymer using N-dimethylformamide as a stabilizer and characterized using UV-vis spectroscopy, transmission electron microscope (TEM), dynamic light scattering (DLS) and Fourier transform infrared spectroscopy (FT-IR). The average size of ßGN was about 300 nm as determined by DLS. The quantitative variation of functional groups between ß-glucan polymer and ßGN was evaluated by FT-IR for explaining the difference in their biological activity against Normal Homo sapiens-Hela contaminant and Hepatic cancer cell lines. CONCLUSIONS: Enriching the low-cost media based on agro-industrial wastes with nutritional ingredients improves the yield of yeast ß-glucan. The present study succeeds to form ß-glucan nanoparticles by a simple method.

Asunto(s)

RESUMEN

Food and agro-industrial by-products provoke a great environmental and economic impact that must be minimized by adding value to these wastes within the framework of circular economy. The relevance of ß-glucans obtained from natural sources (cereals, mushrooms, yeasts, algae, etc.), in terms of their interesting biological activities (hypocholesterolemic, hypoglycemic, immune-modulatory, antioxidant, etc.), has been validated by many scientific publications. Since most of these by-products contain high levels of these polysaccharides or can serve as a substrate of ß-glucan-producing species, this work reviewed the scientific literature, searching for studies that utilized food and agro-industrial wastes to obtain ß-glucan fractions, attending to the applied procedures for extraction and/or purification, the characterization of the glucans and the tested biological activities. Although the results related to ß-glucan production or extraction using wastes are promising, it can be concluded that further research on the glucans' characterization, and particularly on the biological activities in vitro and in vivo (apart from antioxidant capacity), is required to reach the final goal of formulating novel nutraceuticals based on these molecules and these raw materials.