RESUMEN

Building on research on cohort-specific trends in life-course differentiation and destandardization, our study seeks to explore how patterns of family-life-course diversity relate to characteristics of sociopolitical regimes. Applying sequence analysis, we analyse cohort-specific family life courses from nine European countries and Canada, classifying them into five sociopolitical regimes (Nordic, Anglo-Saxon, Mediterranean, Continental, Eastern). We use data from the Harmonized Histories and the German National Educational Panel Survey. Our results indicate that sociopolitical regimes differentiate patterns of life-course diversity quite well in the Nordic, Anglo-Saxon, and Eastern European countries but to a lesser degree in the Mediterranean and Continental countries. In methodological terms, our results suggest that distinguishing patterns of diversity between and within life courses helps to create a more nuanced empirical account of changing life-course patterns, particularly in a cross-national perspective.

RESUMEN

In modern marketing, the emergence of mass customization has reoriented the focus from traditional marketing practices toward a customer-centric approach. The individualization feel among consumers and the innovative approach taken by businesses are currently evident in the market but has yet been holistically analyzed. This study applied a modified Theory of Planned Behavior by incorporating the need for individualization, hedonic and utilitarian motivations, with a 4Ps marketing mix - with the main objective to identify factors contributing to the intention to make purchase of customized products. The survey involved 311 participants who completed an online questionnaire utilizing purposive sampling approach, focusing on those who had previously bought customized products. Structural Equation Modeling was employed as a statistical method to analyze the data with SPSS AMOS v25. Findings revealed that the need for individualization proved to have the highest effect on the intention to purchase customized products, explaining that consumers who are strongly inclined toward individualization not only perceive greater value in customized products but also express a higher intention to purchase them. This was followed by its direct significant effect on attitude, with an even higher effect on perceived behavioral control, along with the marketing mix latent variable and customer perceived value on purchasing intention. This study offers valuable insights for retail brand management and provides potential strategies for business improvement. Moreover, a valuable contribution to the limited literature on the promotion of customized product purchases was identified. Lastly, the developed framework and implications may be applied and extended by future research in the consumer behavior field.

Asunto(s)

RESUMEN

Wearables quantify the activity in team sports and indicate that players experience peak physical loads during competitions. Accordingly, players with limited court time in competitions will miss important training stimuli. The present study aimed to quantify these gaps in physical load in professional handball players. Activity of all players competing in the 2021/2022 Bundesliga (Germany) was tracked using Kinexon LPS sensors. Gaps in physical load were quantified comparing the 25% of appearances with the highest (HIGH; 51.8 ± 5.2 mins) and lowest court times (LOW; 10.1 ± 4.3 mins). Distances, accumulated acceleration, jumps, sprints, impacts, accelerations, and decelerations were analysed as absolute and relative (per minute) outcomes. Players were grouped into wings, backcourts, and pivots. Unpaired t-tests between HIGH and LOW were performed (p < .05), and effect sizes were calculated (Cohen´s d). Analyses revealed significant effects of court time on activity. While absolute activity increased for HIGH, relative activity increased for LOW (p < .05). In addition, effect sizes revealed position-specific gaps in physical load, particularly for acyclic activities (jumps, accelerations). Gaps in physical load resulting from limited court time are highly position-specific. Our observations may provide benchmarks for the position-specific calibration of compensatory training.

Asunto(s)

RESUMEN

A brief characterization of transtheoretical stances to which existing approaches can be allocated is followed by a description of the "Bernese view", that is, what Klaus Grawe and his colleagues, including the authors of this article have developed: the origins, a model of the multiple constraint satisfaction construction of therapist action, a discussion of psychotherapy integration, the crucial role of supervisors in an integrative multiple constraint satisfaction approach, and a discussion of when and how trainees should be introduced to a transtheoretical stance.

RESUMEN

Transcranial magnetic stimulation and electroencephalography (TMS-EEG) recordings are crucial to directly assess cortical excitability and inhibition in a non-invasive and task-free manner. TMS-EEG signals are characterized by TMS-evoked potentials (TEPs), which are employed to evaluate cortical function. Nonetheless, different time windows (TW) have been used to compute them over the years. Moreover, these TWs tend to be the same for all participants omitting the intersubject variability. Therefore, the objective of this study is to assess the effect of using different TWs to compute the TEPs, moving from a common fixed TW to more adaptive individualized TWs. Twenty-nine healthy (HC) controls and twenty schizophrenia patients (SCZ) underwent single-pulse (SP) TMS-EEG protocol. Firstly, only the HC were considered to evaluate the TEPs for three different TWs in terms of amplitude and topographical distribution. Secondly, the SCZ patients were included to determine which TW is better to characterize the brain alterations of SCZ. The results indicate that a more individualized TW provides a better characterization of the SP TMS-EEG signals, although all of them show the same tendency. Regarding the comparison between groups, the individualized TW is the one that provides a better differentiation between populations. They also provide further support to the possible imbalance of cortical excitability/inhibition in the SCZ population due to its reduced activity in the N45 TEP and greater amplitude values in the N100. Results also suggest that the SCZ brain has a baseline hyperactive state since the TEPs of the SCZ appear earlier than those of the HC.

RESUMEN

Background: Families with children who have or are at risk for obesity have differing needs and a one-size-fits-all approach can negatively impact program retention, engagement, and outcomes. Individually tailored interventions could engage families and children through identifying and prioritizing desired areas of focus. Despite literature defining tailoring as individualized treatment informed by assessment of behaviors, intervention application varies. This review aims to exhibit the use of the term "tailor" in pediatric obesity interventions and propose a uniform definition. Methods: We conducted a scoping review following PRISMA-ScR guidelines among peer-reviewed pediatric obesity prevention and management interventions published between 1995 and 2021. We categorized 69 studies into 6 groups: (1) individually tailored interventions, (2) computer-tailored interventions/tailored health messaging, (3) a protocolized group intervention with a tailored component, (4) only using the term tailor in the title, abstract, introduction, or discussion, e) using the term tailor to describe another term, and (5) interventions described as culturally tailored. Results: The scoping review exhibited a range of uses and lack of explicit definitions of tailoring in pediatric obesity interventions including some that deviate from individualized designs. Effective tailored interventions incorporated validated assessments for behaviors and multilevel determinants, and recipient-informed choice of target behavior(s) and programming. Conclusions: We urge interventionists to use tailoring to describe individualized, assessment-driven interventions and to clearly define how an intervention is tailored. This can elucidate the role of tailoring and its potential for addressing the heterogeneity of behavioral and social determinants for the prevention and management of pediatric obesity.

Asunto(s)

RESUMEN

INTRODUCTION: Changes in plasma sodium concentration (pNa, expressed in mEq/L) are common in hemodialysis (HD) patients. Hemodialysis monitors can estimate pNa by using an internal algorithm based on ion dialysance measurements. The present study studies the accuracy of the correlation between the pNa estimated by the dialysis monitor and that measured by the biochemistry laboratory at our center. MATERIAL AND METHODS: A single-centre prospective observational study in patients on a chronic HD program with the 6008 CAREsystem monitor and standard sodium (138mmol/L) and bicarbonate (32mmol/L) prescriptions. Venous blood samples were drawn from each patient before and after each HD session to ensure inter- and intra-individual validity. The pNa was measured in the biochemistry laboratory using indirect potentiometry and simultaneously the estimated pNa by the HD monitor was recorded at the beginning and at the end of the HD session. For statistical analysis, a scatterplot was made, and Spearman's correlation quotient was calculated. In addition, the differences between both methods were represented as Bland-Altman diagrams. RESULTS: The pre-dialysis pNa measured in the laboratory was 137.49±3.3, and that of the monitor, 137.96±2.91, with a correlation with R2 value of 0.683 (p<0.001). The post-dialysis pNa measured in the laboratory was 137.08±2.23, and that of the monitor was 138.87±1.88, with an R2 of 0.442 (p<0.001). On the Bland-Altman plots, the pre-dialysis pNa has a systematic error of 0.49, in favor of the monitor-estimated pNa, with a 95% confidence interval (CI) of (-3.24 to a 4.22). In the post-dialysis pNa, a systematic error of 1.79 with a 95% CI of (-1.64 to 5.22) was obtained. CONCLUSION: The correlation between the pNa estimated by Fresnius 6008 CAREsystem HD monitor and that measured by the laboratory is good, especially pre-dialysis measurements. Further studies should verify the external validity of these results.

Asunto(s)

RESUMEN

In the forensic science context petrol is considered the most common fire accelerant. However, the identification and classification of petrol sources through the years has been proven to be a challenge in the investigation of fire related incidents. This research explored the possibility of identification and classification of petrol sources using high field NMR spectroscopy. In this study, 1H NMR profiling, using specific pulse sequences to analyse neat aliquot petrol samples of different brands collected at different times across the UK and Ireland is shown, for the first time, to provide a diagnostic 'fingerprint' with specific chemical compounds that can be used for identification and classification of petrol samples. This enables linkage of unknown petrol samples to a source and in addition provides a tool which allows exclusion of potential petrol sources. A new, innovative method using 1H selTOCSY is described for the individualization and classification of petrol samples through the identification of olefinic markers in the samples. Those markers were identified as (i) 3-methyl-1-butene, (ii) a mixture of 1-pentene and 3-methyl-1-butene, (iii) 2-methyl-2-butene and (iv) a mixture of cis and trans-2-pentene.

RESUMEN

Introduction: Achieving an adequate level of detail is a crucial part of any modeling process. Thus, oversimplification of complex systems can lead to overestimation, underestimation, and general bias of effects, while elaborate models run the risk of losing validity due to the uncontrolled interaction of multiple influencing factors and error propagation. Methods: We used a validated pipeline for the automated generation of multi-body models of the trunk to create 279 models based on CT data from 93 patients to investigate how different degrees of individualization affect the observed effects of different morphological characteristics on lumbar loads. Specifically, individual parameters related to spinal morphology (thoracic kyphosis (TK), lumbar lordosis (LL), and torso height (TH)), as well as torso weight (TW) and distribution, were fully or partly considered in the respective models according to their degree of individualization, and the effect strengths of these parameters on spinal loading were compared between semi- and highly individualized models. T-distributed stochastic neighbor embedding (T-SNE) analysis was performed for overarching pattern recognition and multiple regression analyses to evaluate changes in occurring effects and significance. Results: We were able to identify significant effects (p < 0.05) of various morphological parameters on lumbar loads in models with different degrees of individualization. Torso weight and lumbar lordosis showed the strongest effects on compression (ß ≈ 0.9) and anterior-posterior shear forces (ß ≈ 0.7), respectively. We could further show that the effect strength of individual parameters tended to decrease if more individual characteristics were included in the models. Discussion: The induced variability due to model individualization could only partly be explained by simple morphological parameters. Our study shows that model simplification can lead to an emphasis on individual effects, which needs to be critically assessed with regard to in vivo complexity. At the same time, we demonstrated that individualized models representing a population-based cohort are still able to identify relevant influences on spinal loading while considering a variety of influencing factors and their interactions.

RESUMEN

PURPOSE: Imbalances of muscle strength and tendon stiffness can increase the operating strain of tendons and risk of injury. Here, we used a new approach to identify muscle-tendon imbalances and personalize exercise prescription based on tendon strain during maximum voluntary contractions (εmax) to mitigate musculotendinous imbalances in male adult volleyball athletes. METHODS: Four times over a season, we measured knee extensor strength and patellar tendon mechanical properties using dynamometry and ultrasonography. Tendon micromorphology was evaluated through an ultrasound peak spatial frequency (PSF) analysis. While a control group (n = 12) continued their regular training, an intervention group (n = 10) performed exercises (3 × /week) with personalized loads to elicit tendon strains that promote tendon adaptation (i.e., 4.5-6.5%). RESULTS: Based on a linear mixed model, εmax increased significantly in the control group over the 9 months of observation (pCon = 0.010), while there was no systematic change in the intervention group (pInt = 0.575). The model residuals of εmax, as a measure of imbalances in muscle-tendon adaptation, demonstrated a significant reduction over time exclusively in the intervention group (pInt = 0.007). While knee extensor muscle strength increased in both groups by ~ 8% (pCon < 0.001, pInt = 0.064), only the intervention group showed a trend toward increased normalized tendon stiffness (pCon = 0.824, pInt = 0.051). PSF values did not change significantly in either group (p > 0.05). CONCLUSION: These results suggest that personalized exercise prescription can reduce muscle-tendon imbalances in athletes and could provide new opportunities for tendon injury prevention.

RESUMEN

This report describes a patient with Pasteurella multocida pneumonia. The patient was a man in his 70s with significant comorbid conditions, including chronic obstructive pulmonary disease (COPD), and is an example of the diverse presentations of P. multocida infections increasingly found in the literature. The novelty of this case lies in the manifestation of P. multocida pneumonia in a patient with underlying respiratory conditions and its successful management, outlining a unique clinical scenario and a tailored therapeutic approach. A 71-year-old male with a medical history of COPD, asthma, tremors, hypertension, and arthritis presented to the emergency department with progressive shortness of breath, productive cough, and chest tightness. The initial diagnosis was COPD exacerbation and left lower lobe pneumonia, for which a regimen of ceftriaxone and azithromycin was initiated. The patient's condition was further complicated by the persistence of symptoms. Following sputum culture analysis, P. multocida infection was identified. Consequently, the antibiotic regimen was tailored, transitioning the patient to doxycycline, which led to substantial clinical improvement, enabling discharge with a 10-day course of oral doxycycline. This case elucidates the importance of precise microbiological diagnosis in patients with complex respiratory conditions, as it guides more targeted antibiotic therapy. It highlights the need for clinical vigilance for atypical pathogens like P. multocida in patients with COPD exacerbations, especially when conventional treatment strategies yield suboptimal responses. The successful resolution of the pneumonia underscores the effectiveness of antibiotic stewardship guided by sputum culture findings.

RESUMEN

Injury mechanisms of the lumbar spine under dynamic loading are dependent on spine curvature and anatomical variation. Impact simulation with finite element (FE) models can assist the reconstruction and prediction of injuries. The objective of this study was to determine which level of individualization of a baseline FE lumbar spine model is necessary to replicate experimental responses and fracture locations in a dynamic experiment.Experimental X-rays from 26 dynamic drop tower tests were used to create three configurations of a lumbar spine model (T12 to L5): baseline, with aligned vertebrae (positioned), and with aligned and morphed vertebrae (morphed). Each model was simulated with the corresponding loading and boundary conditions from dynamic lumbar spine experiments. Force, moment, and kinematic responses were compared to the experimental data. Cosine similarity was computed to assess how well simulation responses match the experimental data. The pressure distribution within the vertebrae was used to compare fracture risk and fracture location between the different models.The positioned models replicated the injured spinal level and the fracture patterns quite well, though the morphed models provided slightly more accuracy. However, for impact reconstruction or injury prediction, the authors recommend pure positioning for whole-body models, as the gain in accuracy was relatively small, while the morphing modifications of the model require considerably higher efforts. These results improve the understanding of the application of human body models to investigate lumbar injury mechanisms with FE models.

Asunto(s)

RESUMEN

BACKGROUND: Safe and efficient provision of intravenous lipid emulsion (ILE) requires a strategy to individualize infusion rates. Estimating the maximum acceptable infusion rate (MaxInfRate) of soybean oil-based ILE (SO-ILE) in individuals by using a triglyceride (TG) kinetic model was reported to be feasible. In this study, we aimed to externally validate and, if needed, update the MaxInfRate estimation. METHODS: The maximum TG concentration (TGmax) in patients receiving SO-ILE at MaxInfRate was evaluated to determine if it met the definition of being <400 mg/dl for 90th percentile of patients. The TG kinetic model was evaluated through prediction performance checks and was subsequently updated using the data set of both the previous model development and present validation studies. RESULTS: Out of 83 patients, 74 had TGmax <400 mg/dl, corresponding to a probability of 89.2% (95% CI, 81.9%-95.2%), and the 90th percentile of TGmax was 400 mg/dl (95% CI, 328-490 mg/dl), closely aligned with the theoretical values. However, the individual TGmax values were biased by the infusion rate because the covariate effects were overestimated in the TG kinetic model, requiring a minor revision. The updated MaxInfRate with the combined data set showed unbiased and more accurate predictions. CONCLUSION: The MaxInfRate was validated in external inpatients and updated with all available data. MaxInfRate estimation for individuals could be an option for the safe and efficient provision of SO-ILE.

Asunto(s)

RESUMEN

The majority of end-stage kidney disease patients are treated with haemodialysis (HD). Starting HD can pose physical, social, and psychological challenges to patients, and mortality rates within the first 6 months are disproportionately high, with intensive HD regimens implicated as a potential factor. Starting HD with an incremental approach, taking residual kidney function (RKF) into account, potentially allows for a gentle start with reduced dialysis intensity. Dialysis intensity (session time or frequency) can then be proportionally increased as RKF reduces. This approach to starting HD has been reported in observational studies to result in better patient self-reported health quality of life and reduced costs, and now several definitive randomised controlled trials are underway comparing an incremental approach to the conventional thrice weekly paradigm. Physician concerns over the risk of inadequate dialysis, with consequent increased emergency admissions, and practical challenges of how to estimate RKF and implement incremental dialysis have impeded widespread adoption. Addressing these challenges is paramount to increasing the uptake of incremental HD. Careful patient selection lies at the heart of a successful incremental HD programme. Generally, patients with a residual urea clearance of > 3 ml/min/1.73 m2 can be considered suitable for starting with incremental HD provided they comply with fluid intake, salt and other dietary recommendations. Calculating RKF from regular interdialytic urine collections and appropriately adjusting sessional HD clearance targets are practical and conceptual challenges. In this report we aim to disentangle these complexities and provide a step-by-step guide for patient selection and adjusting dialysis sessional targets.

RESUMEN

Bronchopleural fistula (BPF) is a potentially fatal complication and remains a surgical challenge. Concomitant problems, such as pulmonary infection and respiratory failure, are typically the main contributors to mortality from BPF because of improper contact between the bronchial and pleural cavity. We present the case of a 75-year-old male patient with a history of right upper lobe lung cancer resection who developed complex BPFs. Following appropriate antibiotic therapy and chest tube drainage, we treated the fistulas using endobronchial valve EBV placement and local argon gas spray stimulation. Bronchoscopic treatment is the preferred method for patients who cannot tolerate a second surgery because it can help to maximize their quality of life. Our treatment method may be a useful reference for treating complex BPF.

Asunto(s)

RESUMEN

Spermatogenesis is critical for insect reproduction and the process is regulated by multiple genes. Glycosyltransferases have been shown to participate in the development of Drosophila melanogaster; however, their role in spermatogenesis is still unclear. In this study, we found that α1,4-galactosyltransferase 1 (α4GT1) was expressed at a significantly higher level in the testis than in the ovary of Drosophila. Importantly, the hatching rate was significantly decreased when α4GT1 RNA interference (RNAi) males were crossed with w1118 females, with only a few mature sperm being present in the seminal vesicle of α4GT1 RNAi flies. Immunofluorescence staining further revealed that the individualization complex (IC) in the testes from α4GT1 RNAi flies was scattered and did not move synchronically, compared with the clustered IC observed in the control flies. Terminal deoxyribonucleotide transferase (TdT)-mediated dUTP nick end labeling (TUNEL) assay showed that apoptosis signals in the sperm bundles of α4GT1 RNAi flies were significantly increased. Moreover, the expression of several individualization-related genes, such as Shrub, Obp44a and Hanabi, was significantly decreased, whereas the expression of several apoptosis-related genes, including Dronc and Drice, was significantly increased in the testes of α4GT1 RNAi flies. Together, these results suggest that α4GT1 may play dual roles in Drosophila spermatogenesis by regulating the sperm individualization process and maintaining the survival of sperm bundles.

RESUMEN

The personalized applications of 3D printing in interventional cardiology and cardiac surgery represent a transformative paradigm in the management of structural heart diseases. This review underscores the pivotal role of 3D printing in enhancing procedural precision, from preoperative planning to procedural simulation, particularly in valvular heart diseases, such as aortic stenosis and mitral regurgitation. The ability to create patient-specific models contributes significantly to predicting and preventing complications like paravalvular leakage, ensuring optimal device selection, and improving outcomes. Additionally, 3D printing extends its impact beyond valvular diseases to tricuspid regurgitation and non-valvular structural heart conditions. The comprehensive synthesis of the existing literature presented here emphasizes the promising trajectory of individualized approaches facilitated by 3D printing, promising a future where tailored interventions based on precise anatomical considerations become standard practice in cardiovascular care.

RESUMEN

Background: The learning curve for percutaneous endoscopic transforaminal discectomy (PETD) is steep, especially for the puncturing and localization procedures. The implementation of 3D printing technology may solve this problem. Methods: A novel individualized 3D-printing template (3D-PT) was designed and utilized in PETD. A prospective randomized controlled trial was performed. A total of 28 patients with lumbar disc herniation treated with PETD were analyzed. Of these, 14 patients were treated with the assistance of 3D printing technology (3D-PT group) in conjunction with fluoroscopy, while the remaining 14 patients were treated exclusively under the guidance of C-arm fluoroscopy (control group). Results: The number of puncture attempts in the 3D-PT group was significantly less than in the control group (1.36 ± 0.63 vs. 6.07 ± 3.08, p = 0.000). The 3D-PT group exhibited a significant reduction in both intraoperative puncture fluoroscopies (2.71 ± 1.27 vs. 12.14 ± 6.15, p = 0.000) and the overall number of fluoroscopies (2.71 ± 1.27 vs. 17.43 ± 6.27, p = 0.000). In the 3D-PT group, there was a significant reduction in both the puncture time (5.77 ± 1.82 vs. 13.99 ± 4.36, p = 0.000) and the total operation time (60.39 ± 9.78 vs. 76.25 ± 17.78, p = 0.007). Complications were not observed in either group. Conclusion: The application of the novel individualized 3D-PT for PETD is effective and safe. The technique has substantial potential and is worth widely promoting.