RESUMEN
Sustainable batteries are key for powering electronic devices of the future, with aqueous zinc-ion batteries (AZIBs) standing out for their use of abundant, readily available elements, and safer production processes. Among the various electrode materials studied for AZIBs, the Chevrel Phase, Mo6S8 has shown promise due to its open framework, but issues with zinc ion trapping have limited its practical application. In this work, we employed computational methods to investigate the insertion-deinsertion mechanism in a series of isostructural Mo6S8-xSex (x = 0-8) solid solutions as materials that could balance the gravimetric capacity and reversible cycling for AZIBs. Density functional theory (DFT) calculations revealed that increasing the Se content would reduce the binding energy of Zn within the structures, enabling Zn deinsertion compared to the Mo6S8 structure. Experiments confirmed the formation of Mo6S8-xSex (x = 0-8) solid solutions, and electrochemical testing showed improved reversibility of Zn insertion/deinsertion as the amount of Se increased, consistent with the computational predictions. Furthermore, combined in operando X-ray diffraction and electrochemical studies revealed a continuous, gradual Zn-insertion process into Mo6S4Se4, in stark contrast to the abrupt phase changes observed upon Zn insertion in Mo6S8 and Mo6Se8. DFT calculations attributed the stabilization of Zn0.5Mo6S4Se4 as a prime reason for preventing phase separation, making Se-substituted compounds promising materials for high-performance AZIBs. Overall, this interdisciplinary approach, integrating computational modeling, materials synthesis, and advanced characterization techniques, offers a pathway for fine-tuning anion chemistry that can help create high-performance electrode materials for sustainable energy storage technologies.
RESUMEN
Ni-rich LiNi x Co y Mn z O2 (NCMxyz, x + y + z = 1, x ≥ 0.8) layered oxide materials are considered the main cathode materials for high-energy-density Li-ion batteries. However, the endless cracking of polycrystalline NCM materials caused by stress accelerates the loss of active materials and electrolyte decomposition, limiting the cycle life. Hence, understanding the chemo-mechanical evolution during (de)lithiation of NCM materials is crucial to performance improvement. In this work, an optical fiber with µÎµ resolution is designed to in operando detect the stress evolution of a polycrystalline LiNi0.8Co0.1Mn0.1O2 (P-NCM811) cathode during cycling. By integrating the sensor inside the cathode, the stress variation of P-NCM811 is completely transferred to the optical fiber. We find that the anisotropy of primary particles leads to the appearance of structural stress, inducing the formation of microcracks in polycrystalline particles, which is the main reason for capacity decay. The isotropy of primary particles reduces the structural stress of polycrystalline particles, eliminating the generation of microcracks. Accordingly, the P-NCM811 with an ordered arrangement structure delivered high electrochemical performance with capacity retention of 82% over 500 cycles. This work provides a brand-new perspective with regard to understanding the operando chemo-mechanical evolution of NCM materials during battery operation, and guides the design of electrode materials for rechargeable batteries.
RESUMEN
Electrical triggering of a metal-insulator transition (MIT) often results in the formation of characteristic spatial patterns such as a metallic filament percolating through an insulating matrix or an insulating barrier splitting a conducting matrix. When MIT triggering is driven by electrothermal effects, the temperature of the filament or barrier can be substantially higher than the rest of the material. Using X-ray microdiffraction and dark-field X-ray microscopy, we show that electrothermal MIT triggering leads to the development of an inhomogeneous strain profile across the switching device, even when the material does not undergo a pronounced, discontinuous structural transition coinciding with the MIT. Diffraction measurements further reveal evidence of unique features associated with MIT triggering including lattice distortions, tilting, and twinning, which indicate structural nonuniformity of both low- and high-resistance regions inside the switching device. Such lattice deformations do not occur under equilibrium, zero-voltage conditions, highlighting the qualitative difference between states achieved through increasing temperature and applying voltage in nonlinear electrothermal materials. Electrically induced strain, lattice distortions, and twinning could have important contributions in the MIT triggering process and drive the material into nonequilibrium states, providing an unconventional pathway to explore the phase space in strongly correlated electronic systems.
RESUMEN
Scanning microscopy methods are crucial for the advancement of nanoelectronics. However, the vertical nanoprobes in such techniques suffer limitations such as the fragility at the tip-sample interface, complex instrumentation, and the lack of in operando functionality in several cases. Here, we introduce scanning plasmon-enhanced microscopy (SPEM) and demonstrate its capabilities on MoS2 and WSe2 nanosheets. SPEM combines a nanoparticle-on-mirror (NPoM) configuration with a portable conductive cantilever, enabling simultaneous optical and electrical characterization. This distinguishes it from other current techniques that cannot provide both characterizations simultaneously. It offers a competitive optical resolution of 600 nm with local enhancement of optical signal up to 20,000 times. A single gold nanoparticle with a 15 nm radius forms pristine, nondamaging van der Waals contact, which allows observation of unexpected p-type behavior of MoS2 at the nanoscale. SPEM reconstructs the NPoM method by eliminating the need for extensive statistical analysis and offering excellent nanoscale mapping resolution of any selected region. It surpasses other scanning techniques in combining precise optical and electrical characterization, interactive simplicity, tip durability, and reproducibility, positioning it as the optimal tool for advancing nanoelectronics.
RESUMEN
Compositing different crystal structures of layered transition metal oxides (LTMOs) is an emerging strategy to improve the electrochemical performance of LTMOs in sodium-ion batteries. Herein, a cobalt-free P2/P3-layered spinel composite, P2/P3-LS-Na1/2Mn2/3Ni1/6Fe1/6O2 (LS-NMNF), is synthesized, and the synergistic effects from the P2/P3 and spinel phases were investigated. The material delivers an initial discharge capacity of 143 mAh g-1 in the voltage range of 1.5-4.0 V and displays a capacity retention of 73% at the 50th cycle. The material shows a discharge capacity of 72 mAh g-1 at 5C. This superior rate performance by the material could be by virtue of the increased electronic conductivity contribution of the incorporated spinel phase. The charge compensation mechanism of the material is investigated by in operando X-ray absorption spectroscopy (in a voltage range of 1.5-4.5 V vs Na+/Na), which revealed the contribution of all transition metals toward the generated capacity. The crystal structure evolution of each phase during electrochemical cycling was analyzed by in operando X-ray diffraction. Unlike in the case of many reported P2/P3 composite cathode materials and spinel-incorporated cobalt-containing P2/P3 composites, the formation of a P'2 phase at the end of discharge is absent here.
RESUMEN
The simultaneous intercalation of protons and Zn2+ ions in aqueous electrolytes presents a significant obstacle to the widespread adoption of aqueous zinc ion batteries (AZIBs) for large-scale use, a challenge that has yet to be overcome. To address this, we have developed a MnO2/tetramethylammonium (TMA) superstructure with an enlarged interlayer spacing, designed specifically to control H+/Zn2+ co-intercalation in AZIBs. Within this superstructure, the pre-intercalated TMA+ ions work as spacers to stabilize the layered structure of MnO2 cathodes and expand the interlayer spacing substantially by 28 % to 0.92 nm. Evidence from in operando pH measurements, in operando synchrotron X-ray diffraction, and X-ray absorption spectroscopy shows that the enlarged interlayer spacing facilitates the diffusion and intercalation of Zn2+ ions (which have a large ionic radius) into the MnO2 cathodes. This spacing also helps suppress the competing H+ intercalation and the formation of detrimental Zn4(OH)6SO4·5H2O, thereby enhancing the structural stability of MnO2. As a result, enhanced Zn2+ storage properties, including excellent capacity and long cycle stability, are achieved.
RESUMEN
Electrochemical reactions are the unrivaled backbone of next-generation energy storage, energy conversion, and healthcare devices. However, the real-time visualization of electrochemical reactions remains the bottleneck for fully exploiting their intrinsic potential. Herein, for the first time, a universal approach to direct spatiotemporal-dynamic in situ optical visualization of pH-based as well as specific byproduct-based electrochemical reactions is performed. As a highly relevant and impactful example, in-operando optical visualization of on-catalyst water splitting processes is performed in neutral water/seawater. HPTS (8-hydroxypyrene-1,3,6-trisulfonicacid), known for its exceptional optical capability of detecting even the tiniest pH changes allows the unprecedented "spatiotemporal" real-time visualization at the electrodes. As a result, it is unprecedentedly revealed that at a critical cathode-to-anode distance, the bulk-electrolyte "self-neutralization" phenomenon can be achieved during the water splitting process, leading to the practical realization of enhanced additive-free neutral water splitting. Furthermore, it is experimentally unveiled that at increasing electrolyte flow rates, a swift and severe inhibition of the concomitantly forming acidic and basic 'fronts', developed at anode and cathode compartments are observed, thus acting as a "buffering" mechanism. To demonstrate the universal applicability of this elegant strategy which is not limited to pH changes, the technique is extended to visualization of hypochlorite/ chlorine at the anode during electrolysis of sea water using N-(4-butanoic acid) dansylsulfonamide (BADS). Thus, a unique experimental tool that allows real-time spatiotemporal visualization and simultaneous mechanistic investigation of complex electrochemical processes is developed that can be universally extended to various fields of research.
RESUMEN
Monolayers of transition metal dichalcogenides (2D TMDs) experience strong modulation of their optical properties when the charge density is varied. Indeed, the transition from carriers composed mostly of excitons at low electron density to a situation in which trions dominate at high density is accompanied by a significant evolution of both the refractive index and the extinction coefficient. Using optical interference reflection microscopy at the excitonic wavelength, this (n, κ)-q relationship can be exploited to directly image the electron density in operating TMD devices. In this work, we show how this technique, which we call XRM (excitonic reflection microscopy), can be used to study charge distribution in MoS2 field-effect transistors with subsecond throughput, in wide-field mode. Complete maps of the charge distribution in the transistor channel at any drain and gate bias polarization point (VDS, VGS) are obtained, at â¼3 orders of magnitude faster than with scanning probe techniques such as KPFM. We notably show how the advantages of XRM enable real-time mapping of bias-dependent charge inhomogeneities, the study of resistive delays in 2D polycrystalline networks, and the evaluation of the VDS vs VGS competition to control the charge distribution in active devices.
RESUMEN
Introducing ethylene glycol (EG) side chains to a conjugated polymer backbone is a well-established synthetic strategy for designing organic mixed ion-electron conductors (OMIECs). However, the impact that film swelling has on mixed conduction properties has yet to be scoped, particularly for electron-transporting (n-type) OMIECs. Here, the authors investigate the effect of the length of branched EG chains on mixed charge transport of n-type OMIECs based on a naphthalene-1,4,5,8-tetracarboxylic-diimide-bithiophene backbone. Atomic force microscopy (AFM), grazing-incidence wide-angle X-ray scattering (GIWAXS), and scanning tunneling microscopy (STM) are used to establish the similarities between the common-backbone films in dry conditions. Electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) and in situ GIWAXS measurements reveal stark changes in film swelling properties and microstructure during electrochemical doping, depending on the side chain length. It is found that even in the loss of the crystallite content upon contact with the aqueous electrolyte, the films can effectively transport charges and that it is rather the high water content that harms the electronic interconnectivity within the OMIEC films. These results highlight the importance of controlling water uptake in the films to impede charge transport in n-type electrochemical devices.
RESUMEN
Despite the considerable significance of utilizing ultra-thin film (utf) hydrogels as multipurpose platforms for biomedical applications, there is still an important lack of adequate characterization techniques suitable for such materials. In this Perspective, the use of quartz crystal microbalance with dissipation (QCM-D) coupled with spectral ellipsometry (SE) is presented as a potential tool for the complete characterization of utf-hydrogels due to its nanometric sensitivity and high versatility. Herein, the fundaments for utf-hydrogel characterization are settled down as far as the QCM-D/SE response is explored under a wide range of different in operando wet working conditions measurements such as temperature or liquid media, among others. Therefore, the design of measuring protocols capable to perform is proposed and compiled, for the first time, complete and precise characterization of the cross-link density, thickness variations (swelling ratio determination), stability analyses, and mechanical studies (including the simultaneous generation of stress-strain curves and the evaluation of the viscoelastic; leading to the final determination of the Poisson's ratio) under different in operando conditions. Finally, the future challenges and implications for the general characterization of soft-thin films are discussed.
RESUMEN
Developing high-performance carbonaceous anode materials for sodium-ion batteries (SIBs) is still a grand quest for a more sustainable future of energy storage. Introducing sulfur within a carbon framework is one of the most promising attempts toward the development of highly efficient anode materials. Herein, a microporous sulfur-rich carbon anode obtained from a liquid sulfur-containing oligomer is introduced. The sodium storage mechanism shifts from surface-controlled to diffusion-controlled at higher synthesis temperatures. The different storage mechanisms and electrode performances are found to be independent of the bare electrode material's interplanar spacing. Therefore, these differences are attributed to an increased microporosity and a thiophene-rich chemical environment. The combination of these properties enables extending the plateau region to higher potential and achieving reversible overpotential sodium storage. Moreover, in-operando small-angle X-ray scattering (SAXS) reveals reversible electron density variations within the pore structure, in good agreement with the pore-filling sodium storage mechanism occurring in hard carbons (HCs). Eventually, the depicted framework will enable the design of high-performance anode materials for sodium-ion batteries with competitive energy density.
RESUMEN
Sodium/potassium-ion batteries (NIBs and KIBs) are considered the most promising candidates for lithium-ion batteries in energy storage fields. Tin sulfide (SnS2) is regarded as an attractive negative candidate for NIBs and KIBs thanks to its superior power density, high-rate performance and natural richness. Nevertheless, the slow dynamics, the enormous volume change and the decomposition of polysulfide intermediates limit its practical application. Herein, microcubes SnS2 were prepared through sacrificial MnCO3 template-assisted and a facile solvothermal reaction strategy and their performance was investigated in Na and K-based cells. The unique hollow cubic structure and well-confined SnS2 nanosheets play an important role in Na+/K+ rapid kinetic and alleviating volume change. The effect of the carbon additives (Super P/C65) on the electrochemical properties were investigated thoroughly. The in operando and ex-situ characterization provide a piece of direct evidence to clarify the storage mechanism of such conversion-alloying type negative electrode materials.
RESUMEN
The paper describes a comparative study of swelling processes in free-standing graphene oxide (GO) membranes and GO laminates encapsulated with epoxy glue. For free-standing graphene oxide membranes, a huge variation in d-spacing in the range of 8-12 Å depending on the ambient humidity and from 12 to >30 Å depending on the electrolyte type and its concentration was revealed using direct in situ and in operando XRD studies. Limited swelling at various humidity levels as well as in electrolyte solution with low constriction/expansion of epoxy-encapsulated GO is counterposed to that of free-standing graphene oxides. The swelling suppression was explained by both physical constriction and the intercalation of amines into GO laminates, which was proved by local EDX studies. This results in ion diffusivity variation for over 2 orders of magnitude in free-standing and constrained graphene oxide membranes and provides factual evidence for tunable sieving of ions with confined graphene oxides.
RESUMEN
We have used in operando grazing incidence small-angle X-ray scattering (GISAXS) to monitor structural changes during templated electrodeposition of mesoporous platinum films on gold electrodes from a ternary lyotropic liquid crystalline mixture of aqueous hexachloroplatinic acid and the diblock copolymer surfactant Brij56. While the cylindrical micelles of the lyotropic liquid crystal (LLC) in the hexagonal phase have a center-to-center distance of 7.5 nm with a preferential alignment parallel to the electrode surface, the electrodeposited platinum films contain highly ordered mesopores arranged in a 2D hexagonal structure, with a center-to-center distance of about 8.5 nm and a preferential orientation perpendicular to the electrode surface. The progression of structural changes of the LLC template and the deposited mesoporous Pt could be monitored for the first time in operando by GISAXS: within the first 14 s of deposition, a nucleation burst of Pt coincides with a loss of preferential alignment of the LLC. Initially, the morphology of the 2-dimensionally nucleated Pt replicates the Au substrate. During the following 5 to 7 min, the growth morphology of the Pt film changes, and vertically aligned mesopores form. Our results indicate mutual interaction between the species involved in the electrodeposition and the LLC template, leading to a partial loss of horizontal orientation of the LLC during Pt nucleation before vertical rearrangement of the micelles to the electrode surface. The vertically aligned mesopores in the Pt and the possibility to produce freestanding films make these materials interesting in fields such as electrocatalysis, energy harvesting, and nanofluidics.
RESUMEN
With the growing popularity of Li-ion batteries in large-scale applications, building a safer battery has become a common goal of the battery community. Although the small errors inside the cells trigger catastrophic failures, tracing them and distinguishing cell failure modes without knowledge of cell anatomy can be challenging using conventional methods. In this study, a real-time, non-invasive magnetic field imaging (MFI) analysis that can signal the battery current-induced magnetic field and visualize the current flow within Li-ion cells is developed. A high-speed, spatially resolved MFI scan is used to derive the current distribution pattern from cells with different tab positions at a current load. Current maps are collected to determine possible cell failures using fault-simulated batteries that intentionally possess manufacturing faults such as lead-tab connection failures, electrode misalignment, and stacking faults (electrode folding). A modified MFI analysis exploiting the magnetic field interference with the countercurrent-carrying plate enables the direct identification of defect spots where abnormal current flow occurs within the pouch cells.
RESUMEN
Understanding the conversion mechanism of active materials in the electrode is essential to guide the design of room-temperature sodium-sulfur/selenium (RT Na-S/Se) batteries. However, there is still some confusion regarding the dissolution and formation of the insulating active particles. Conventional detection methods have difficulty in capturing and presenting the dynamic processes of these microscopic particles in the "black box" battery. In this study, a visualization technique was applied to track and monitor the internal evolution process of RT Na-S/Se batteries, visualizing the dissolution and formation details of insulating solid particles in real time. Supercooled liquid sulfur and spherulites were also observed for the first time in this system. The microstructural evolution mechanism is inferred based on the observation of the dynamic information on microscopic particles. This paper provides insights into the internal workings of RT Na-S and Na-Se batteries, allowing for a more comprehensive and in-depth understanding of their dynamics.
RESUMEN
Li-ion transport and phase transition of solid electrolytes are critical and fundamental issues governing the rate and cycling performances of solid-state batteries. In this work, in-operando high-pressure nuclear magnetic resonance (NMR) spectroscopy for the solid-state battery is developed and applied, in combination with 6 Li-tracer NMR and high-resolution NMR spectroscopy, to investigate the Li10 GeP2 S12 electrolyte under true-to-life operation conditions. The results reveal that the Li10 GeP2 S12 phase may become more disordered and a large amount of conductive metastable ß-Li3 PS4 as the glassy matrix in the electrolyte transforms into less conductive phases, mainly γ-Li3 PS4 , when high current densities (e.g., ≥0.5 mA cm-2 ) are applied to the electrolyte. The overall Li-transport also varies and shows a tendency of boundary phases and Li10 GeP2 S12 synergistic dominant conduction at high currents. Accordingly, a mechanism of structural change induced by stress variation due to the drastic morphological change during Li-In alloying at high currents, and the local Li+ diffusion coefficient discrepancy is proposed. These new findings of Li-ion transport and boundary phase transition in Li10 GeP2 S12 solid electrolyte under high-pressure and high current density are first reported and will help provide previously lacking insights into the relationship of structure and performance of Li10 GeP2 S12 .
RESUMEN
Transition metal dichalcogenide (TMD) coatings have attracted enormous scientific and industrial interest due to their outstanding tribological behavior. The paradigmatic example is MoS2 , even though selenides and tellurides have demonstrated superior tribological properties. Here, an innovative in operando conversion of Se nanopowders into lubricious 2D selenides, by sprinkling them onto sliding metallic surfaces coated with Mo and W thin films, is described. Advanced material characterization confirms the tribochemical formation of a thin tribofilm containing selenides, reducing the coefficient of friction down to below 0.1 in ambient air, levels typically reached using fully formulated oils. Ab initio molecular dynamics simulations under tribological conditions reveal the atomistic mechanisms that result in the shear-induced synthesis of selenide monolayers from nanopowders. The use of Se nanopowder provides thermal stability and prevents outgassing in vacuum environments. Additionally, the high reactivity of the Se nanopowder with the transition metal coating in the conditions prevailing in the contact interface yields highly reproducible results, making it particularly suitable for the replenishment of sliding components with solid lubricants, avoiding the long-lasting problem of TMD-lubricity degradation caused by environmental molecules. The suggested straightforward approach demonstrates an unconventional and smart way to synthesize TMDs in operando and exploit their friction- and wear-reducing impact.
RESUMEN
Polysulfides aqueous redox flow batteries (PS-ARFBs) with large theoretical capacity and low cost are one of the most promising solutions for large-scale energy storage technology. However, sluggish electrochemical redox kinetics and nonnegligible crossover of aqueous polysulfides restrict the battery performances. Herein, it is found that the Co, Zn dual-doped N-C complex have enhanced electrochemical adsorption behaviors for Na2 S2 . It exhibits significantly electrochemical redox activity compared to the bare glassy carbon electrode. And the redox reversibility is also improved from ΔV = 210 mV on Zn-doped N-C complex to ΔV = 164 mV on Co, Zn-doped N-C complex. Furthermore, membrane-electrode assembly (MEA) based on Co, Zn-doped N-C complex is firstly proposed to enhance the redox performances and relieve the crossover in PS-ARFBs. Thus, an impressively high and reversible capacity of 157.5 Ah L-1 for Na2 S2 with a high capacity utilization of 97.9% could be achieved. Moreover, a full cell PS-ARFB with Na2 S2 anolyte and Na4 [Fe(CN)6 ] catholyte exhibits high energy efficiency ≈88.4% at 10 mA cm-2 . A very low capacity decay rate of 0.0025% per cycle is also achieved at 60 mA cm-2 over 200 cycles.
RESUMEN
Thermal energy management is a crucial aspect of many research developments, such as hybrid and soft electronics, aerospace, and electric vehicles. The selection of materials is of critical importance in these applications to manage thermal energy effectively. From this perspective, MXene, a new type of 2D material, has attracted considerable attention in thermal energy management, including thermal conduction and conversion, owing to its unique electrical and thermal properties. However, tailored surface modification of 2D MXenes is required to meet the application requirements or overcome specific limitations. Herein, a comprehensive review of surface modification of 2D MXenes for thermal energy management is discussed. First, this work discusses the current progress in the surface modification of 2D MXenes, including termination with functional groups, small-molecule organic compound functionalization, and polymer modification and composites. Subsequently, an in situ analysis of surface-modified 2D MXenes is presented. This is followed by an overview of the recent progress in the thermal energy management of 2D MXenes and their composites, such as Joule heating, heat dissipation, thermoelectric energy conversion, and photothermal conversion. Finally, some challenges facing the application of 2D MXenes are discussed, and an outlook on surface-modified 2D MXenes is provided.