RESUMEN

Resumen El presente trabajo fue realizado por el Grupo de Trabajo Gestión de Acreditación de la Confederación Latinoamericana de Bioquímica Clínica (COLABIOCLI) con el objetivo de conocer el estado de los Laboratorios Clínicos (LC) con respecto a la gestión de la calidad y el estatus de la acreditación ISO 15189 en Latinoamérica. La investigación fue de tipo observacional, transversal y descriptiva; se utilizó como herramienta la encuesta y como instrumento el cuestionario. Los resultados se expresaron en frecuencias simples y porcentajes y se analizaron por estadística descriptiva. En las 253 encuestas aceptadas participaron LC de 15 de 16 países integrantes de COLABIOCLI. El 80% de los LC tenían procedimientos de la fase preanalítica y posanalítica. Más del 85% contaba con registros de gestión de la calidad y participaban en programas de evaluación externa de la calidad (PEEC), principalmente en las disciplinas de química clínica (mayor del 80%) y hematología (mayor del 70%). El 7,51% estaban acreditados por ISO 15189 y 10,27% certificados por ISO 9001. La gestión de la calidad y los PEEC presentan un importante avance en los LC de Latinoamérica; sin embargo, es deseable que todas las partes interesadas armonicen intereses, para que este proceso sea introducido paulatinamente y como parte de las normativas y/o regulaciones obligatorias respectivas, lo que podrá contribuir a que más LC se acrediten en base a ISO 15189 en la región.

Abstract The present work was carried out by the Accreditation Management Working Group of the Latin American Confederation of Clinical Biochemistry (COLABIOCLI) with the aim of knowing the status of Clinical Laboratories (LC, for its acronym in Spanish) with respect to quality management and the status of the ISO 15189 accreditation in Latin America. The research was observational, cross-sectional, and descriptive, using the survey as a tool and the questionnaire as an instrument. The results were expressed in simple frequencies and percentages and analysed by descriptive statistics. LCs from 15 of the 16 member countries of COLABIOCLI participated in the 253 surveys accepted. Eighty percent of LCs had pre-analytical and post-analytic procedures, and more than 85% had quality management records and participated in external quality assessment services (EQAS), mainly in the disciplines of clinical chemistry (greater than 80%) and hematology (greater than 70%); 7.51% were ISO 15189 accredited and 10.27% ISO 9001 certified. Although quality management and EQAS represent an important advance in LCs in Latin America, it is desirable that all stakeholders harmonise interests, so that this process is introduced gradually and as part of the respective mandatory standards and/or regulations, thus contributing to more LCs being accredited based on ISO 15189 in the region.

Resumo O presente trabalho foi realizado pelo Grupo de Trabalho de Gestão de Acreditação da Confederação Latino-Americana de Bioquímica Clínica (COLABIOCLI) com o objetivo de conhecer o status dos Laboratórios Clínicos (LC) com relação à gestão da qualidade e o status da acreditação ISO 15189 na América Latina. A pesquisa foi observacional, transversal e descritiva, utilizando a enquete como ferramenta e o questionário como instrumento. Os resultados foram expressos em frequências simples e porcentagens e analisados por estatística descritiva. LCs de 15 dos 16 países membros do COLABIOCLI participaram das 253 pesquisas aceitas; 80% dos LCs tinham procedimentos da fase pré-analítica e pós-analítica, e mais de 85% tinham registros de gestão da qualidade e participavam de programas de avaliação externa da qualidade (PEEC), principalmente nas disciplinas de química clínica (maior de 80%) e hematologia (maior de 70%); 7,51% estavam acreditados pela ISO 15189 e 10,27% certificados pela ISO 9001. Embora a gestão da qualidade e os PEECs apresentem um importante avanço nos LCs da América Latina, é desejável que todas as partes interessadas harmonizem interesses, para que esse processo seja introduzido gradualmente e como parte das respectivas normas e/ou regulações obrigatórias, o que poderá contribuir para que mais LCs sejam acreditados com base na ISO 15189 na região.

RESUMEN

Ceiba aesculifolia is an important species in Mexico that generates significant amounts of biomass waste during its exploitation, which can be utilized to produce energy. This study presents the characterization of this waste based on chemical (proximal and elemental) and thermal analyses (TGA-DTG) at different heating rates (ß = 10-30 °C/min (283-303 K/min)) in the presence of nitrogen and in a temperature range of 25-900 °C. Kinetic parameters were calculated and analyzed as well. Activation energy (Ea) and the pre-exponential factor (A) were determined using the Friedman (132.03 kJ/mol, 8.11E + 10 s -1), FWO (121.65 kJ/mol, 4.30E + 09), KAS (118.14 kJ/mol, 2.41E + 09), and Kissinger (155.85 kJ/mol, 3.47E + 11) kinetic methods. Variation in the reaction order, n (0.3937-0.6141), was obtained by Avrami's theory. We also calculated the thermodynamic parameters (ΔH, ΔG, ΔS) for each kinetic method applied. The results for Ea, A, n, ΔH, ΔG, and ΔS show that this biomass waste is apt for use in pyrolysis. Moreover, the moisture (<10%), ash (<2%), volatile material (>80%), and HHV (>19%) contents of C. aesculifolia allowed us to predict acceptable performance in generating energy and fuels. Finally, infrared spectroscopy analysis (FT-IR) allowed us to identify important functional groups, including one that belongs to the family of the aliphatic hydrocarbons.

Asunto(s)

RESUMEN

Background: Metrology plays a crucial role in small healthcare service businesses to ensure the quality of products and services. While legal metrology in healthcare exists in some regions, it lacks harmonization. In other countries, there is limited presence of metrology in medical and biomedical engineering. We aimed to evaluate the implementation of metrological assurance systems for medical devices in Latin America. Methods: A systematic review was conducted following PRISMA 2020 guidelines and registered with PROSPERO (CRD42022359284). Searches were performed across 13 databases from October 30th to November 3rd, 2022. The search equation was "(((quality assurance) AND (metrology)) AND (medical devices))." A total of 7,789 documents were identified, of which only 16 met the inclusion criteria. Results: The majority of studies (75%) were conducted in Colombia, with a significant portion being undergraduate theses. The primary normative references used in the analyzed studies were ISO 10012 and ISO 17025, with the majority (68.75%) relying on national legislation for their approach. One study in Colombia referenced eight standards, and one in Brazil analyzed user involvement in medical device management. Among the included studies, 56.25% were conducted in healthcare institutions, mainly clinics. Most studies provided implementation guidelines, with ISO 10012 being prominent, alongside ISO 17025, which implicitly addresses ISO 9001 elements. Global bias was low across all studies. Conclusion: Our results underscore the importance of metrological assurance in managing medical devices in Latin America. The utilization of international standards and national legislation illustrates the diverse approaches adopted by different institutions. Future research should focus on optimizing metrological practices to enhance quality and safety in healthcare.

RESUMEN

This paper presents a comprehensive review of natural fiber-reinforced composites (NFRCs) for lower-limb prosthetic designs. It covers the characteristics, types, and properties of natural fiber-reinforced composites as well as their advantages and drawbacks in prosthetic designs. This review also discusses successful prosthetic designs that incorporate NFRCs and the factors that make them effective. Additionally, this study explores the use of computational biomechanical models to evaluate the effectiveness of prosthetic devices and the key factors that are considered. Overall, this document provides a valuable resource for anyone interested in using NFRCs for lower-limb prosthetic designs.

RESUMEN

Chagas disease is a Neglected Tropical Disease with limited and ineffective therapy. In a search for new anti-trypanosomal compounds, we investigated the potential of the metabolites from the bacteria living in the corals and sediments of the southeastern Brazilian coast. Three corals, Tubastraea coccinea, Mussismilia hispida, Madracis decactis, and sediments yielded 11 bacterial strains that were fully identified by MALDI-ToF/MS or gene sequencing, resulting in six genera-Vibrio, Shewanella, Mesoflavibacter, Halomonas, Bacillus, and Alteromonas. To conduct this study, EtOAc extracts were prepared and tested against Trypanosoma cruzi. The crude extracts showed IC50 values ranging from 15 to 51 µg/mL against the trypomastigotes. The bacterium Mesoflavibacter zeaxanthinifaciens was selected for fractionation, resulting in an active fraction (FII) with IC50 values of 17.7 µg/mL and 23.8 µg/mL against the trypomastigotes and amastigotes, respectively, with neither mammalian cytotoxicity nor hemolytic activity. Using an NMR and ESI-HRMS analysis, the FII revealed the presence of unsaturated iso-type fatty acids. Its lethal action was investigated, leading to a protein spectral profile of the parasite altered after treatment. The FII also induced a rapid permeabilization of the plasma membrane of the parasite, leading to cell death. These findings demonstrate that these unsaturated iso-type fatty acids are possible new hits against T. cruzi.

RESUMEN

This study investigated the prevalence and genetic diversity of gastroenteric viruses in mussels and oysters in Rio de Janeiro, Brazil. One hundred and thirty-four marketed bivalve samples were obtained between January and December 2022. The viral analysis was performed according to ISO/TS 15216, and the screening revealed the detection of norovirus GII/GI (40.3%), sapovirus (SaV; 12.7%), human mastadenovirus (7.5%), and rotavirus A (RVA; 5.9%). In total, 44.8% (60) of shellfish samples tested positive for one or more viruses, 46.7% (28/60) of the positive samples tested positive for a single viral agent, 26.7% (16) tested positive for two viral agents, 8.3% (5) for three viral agents, and 13.3% (8) for four viral agents. Additionally, three mussel samples were contaminated with the five investigated viruses (5%, 3/60). Norovirus GII showed the highest mean viral load (3.4 × 105 GC/g), followed by SaV (1.4 × 104 GC/g), RVA (1.1 × 104 GC/g), human mastadenovirus (3.9 × 103 GC/g), and norovirus GI (6.7 × 102 GC/g). Molecular characterization revealed that the recovered norovirus strains belonged to genotypes GII.2, GII.6, GII.9, GII.17, and GII.27; SaV belonged to genotypes GI.1 and GIV.1; RVA to genotypes G6, G8, P[8]-III, and human mastadenovirus to types F40 and F41. The GII.27 norovirus characterized in this study is the only strain of this genotype reported in Brazil. This study highlights the dissemination and diversity of gastroenteric viruses present in commercialized bivalves in a touristic area, indicating the potential risk to human health and the contribution of bivalves in the propagation of emerging pathogens.

Asunto(s)

RESUMEN

The concept of modern human sun protection is no more than one hundred years, but real development of it, including protection against UVA + UVB radiation (and more recently also the IR and blue light), has been no more than 30 years. One fundamental issue while formulating sunscreens is the photostability of the UV filters, which is particularly feeble for the UVA. The gold standard for the determination of sunscreen UVA protection "in vitro" is ISO 24443:2021. Still, interlaboratory results are not as consistent as expected. The Technical Committee for Cosmetics (ISO TC 217) has tried to standardize the method with precise specifications for the materials and equipment used. In particular, the standardization of UV exposure sources based on Xe arc lamps. This fact requires expensive equipment out of the reach of many laboratories to achieve adequate temperature control on the samples. In this paper, it will be shown that, within the experimental error, satisfactory results were achieved with a cheap commercial LED source irradiating only in the UVA spectra. Evidence is presented to conclude that other more relevant factors must be considered as the main cause of uncertainties.

RESUMEN

Chagas disease is a Neglected Tropical Disease with limited and ineffective therapy. In a search for new anti-trypanosomal compounds, we investigated the potential of the metabolites from the bacteria living in the corals and sediments of the southeastern Brazilian coast. Three corals, Tubastraea coccinea, Mussismilia hispida, Madracis decactis, and sediments yielded 11 bacterial strains that were fully identified by MALDI-ToF/MS or gene sequencing, resulting in six genera—Vibrio, Shewanella, Mesoflavibacter, Halomonas, Bacillus, and Alteromonas. To conduct this study, EtOAc extracts were prepared and tested against Trypanosoma cruzi. The crude extracts showed IC50 values ranging from 15 to 51 μg/mL against the trypomastigotes. The bacterium Mesoflavibacter zeaxanthinifaciens was selected for fractionation, resulting in an active fraction (FII) with IC50 values of 17.7 μg/mL and 23.8 μg/mL against the trypomastigotes and amastigotes, respectively, with neither mammalian cytotoxicity nor hemolytic activity. Using an NMR and ESI-HRMS analysis, the FII revealed the presence of unsaturated iso-type fatty acids. Its lethal action was investigated, leading to a protein spectral profile of the parasite altered after treatment. The FII also induced a rapid permeabilization of the plasma membrane of the parasite, leading to cell death. These findings demonstrate that these unsaturated iso-type fatty acids are possible new hits against T. cruzi.

RESUMEN

This study presents the design and implementation of an electronic system aimed at capturing vibrations produced during truck operation. The system employs a graphical interface to display vibration levels, ensuring the necessary comfort and offering indicators as a solution to mitigate the damage caused by these vibrations. Additionally, the system alerts the driver when a mechanical vibration that could potentially impact their health is detected. The field of health is rigorously regulated by various international standards and guidelines. The case of mechanical vibrations, particularly those transmitted to the entire body of a seated individual, is no exception. Internationally, ISO 2631-1:1997/Amd 1:2010 oversees this study. The system was designed and implemented using a blend of hardware and software. The hardware components comprise a vibration sensor, a data acquisition card, and a graphical user interface (GUI). The software components consist of a data acquisition and processing library, along with a GUI development framework. The system underwent testing in a controlled environment and demonstrated stability and robustness. The GUI proved to be intuitive and could be integrated into modern vehicles with built-in displays. The findings of this study suggest that the proposed system is a viable and effective method for capturing vibrations in trucks and informing drivers about vibration levels. This system has the potential to enhance the comfort and safety of truck drivers.

RESUMEN

The present study contains an experimental analysis of the vibratory response in a low-cylinder engine motorcycle at varying suspension preloads. Three different speed bumps of varying heights were used to subject the motorcycle to different vibrations. The analysis was carried out in three domains: time, frequency, and time-frequency. A triaxial accelerometer was used to measure the vibrations at the seat of the vehicle. The results indicated that the suspension system became more differentiated as the height of the bumps increased. However, for lower bumps, the action of the three spring preloads studied was quite similar. Quantitatively, only the higher bump showed a significant difference between the set preloads. The spectral distribution revealed that the frequency of interest was below 20 Hz for all the studied cases, which is in the same range of human body natural frequencies. The findings of this research can be utilized to enhance the design of low-cost motorcycles, thereby improving the safety and comfort of their drivers and passengers. This study constitutes a significant step towards developing an affordable system capable of gathering sufficient data to support the creation of evidence-based public health policies and propose new transport industry standards based on field measurements.

Asunto(s)

RESUMEN

High amounts of grains in the equine diet led to high starch intake, causing gut alterations. Aimed at reducing harmful effects, Macleaya cordata extract (MCE) is a phytogenic additive that stands out for its antibiotic and anti-inflammatory effects proven in different species. However, there is no useful information for horses. The objective of this study was to evaluate the effects of different levels of the inclusion of commercial MCE on body weight (BW), body condition score (BCS), total apparent digestibility (AD) of nutrients, faecal pH and fermentative products, on ponies fed a high-starch diet. Eight healthy gelding Mini Horse ponies were used. The study design was contemporary double Latin-square 4 × 4 in the experimental unit, with the animal inside each experimental period (n = 8 experimental units per group). The experiment was conducted over four 20-d periods. Basal diet attended 1.75% BW dry matter daily and starch intake was 2.2 g/kg BW/meal. The experimental groups were as follows: control - without food additive; S1-1 mg/kg BW MCE; S1.5-1.5 mg/kg BW MCE and S2-2 mg/kg BW MCE. The data were analysed by PROC MIXED of SAS (p < 0.05). Tendency was considered when 0.05 < p < 0.1. Our results showed higher ether extract (EE) AD for S2 group (63.75%) when compared with the control (54.55%) (p = 0.0377). Lactate was lower (p = 0.0391) in S1 (3.27 mmol/l) and S2 (3.24 mmol/l) groups, although pH was not different between groups. Iso-valerate was greater in S1 group (2.29 mmol/l; p = 0.0289), and a tendency of higher butyrate values was found for S1 and S2 groups (p = 0.0980). We concluded that MCE supplementation probably positively influences equine resident microbiota, improving EE AD and increasing iso-valerate concentration. It can also minimise harmful high-starch impact. We recommend further studies using MCE in horses for a better understanding of its local activity and possible benefits.

Asunto(s)

RESUMEN

Objectives. This study analyzes the differences between goods companies with a Standard No. ISO 9001:2015 quality management system (QMS) and those without, in terms of implementation of biosecurity measures during the COVID-19 pandemic. The study shows whether having a QMS helped companies to implement the biosecurity measures required to continue operating during a pandemic. Methods. The sample was composed of 145 Peruvian goods companies. The empirical data were collected through a questionnaire sent to company presidents, general managers and department heads. The questionnaire focused on four biosecurity dimensions in the workplace: protocols, preventive actions, biosecurity processes and risk management. Results. The study found that companies with a QMS (Standard No. ISO 9001:2015) significantly differed from companies without in the implementation of three of the four biosecurity dimensions. Conclusions. This study is useful for academia and companies because it identifies the main differences between certified and non-certified companies, in terms of adoption of biosecurity measures. This study highlights the importance of a QMS to respond to hazardous situations like a global health crisis, but also provides useful information for the strategic decision-making process of companies.

Asunto(s)

RESUMEN

Introducción: En Cuba, se desarrolló un medio de cultivo cromogénico y fluorogénico, para la detección, aislamiento y diferenciación de Salmonella de otras bacterias Gram negativas. El método que emplea el medio fue validado y su uso se adoptó en una norma cubana. El aseguramiento de la calidad y el control del rendimiento de los medios garantizan la confiabilidad de los resultados analíticos. La norma ISO 11133 establece criterios mínimos y métodos para evaluarlos. Objetivo: Evaluar los criterios de control de la calidad y de rendimiento de CromoCen® SALM, establecidos en la ISO 11133:2014/Amd.1:2018, para demostrar su fiabilidad para el análisis microbiológico de los alimentos de consumo humano. Métodos: Se evaluaron los indicadores de calidad físico-químicos de tres lotes y se definió un conjunto de ellos que caracteriza la calidad del medio antes y después de terminado, así como la consistencia entre lotes. Para el ensayo de rendimiento se seleccionaron 10 cepas de diferentes géneros. Se determinó la relación de productividad, el factor de selectividad y la electividad de CromoCen® SALM, según la ISO 11133. Resultados: La evaluación físico-química mostró una consistencia entre lotes en color, homogeneidad, apariencia del polvo y del medio preparado. Los valores de contenido de humedad y pH se encontraron dentro de los valores establecidos para este producto. La relación de productividad de CromoCen® SALM con respecto al agar triptona soya, fue superior al 50 por ciento, mientras que el factor de selectividad resultó de 4. Se demostró que en el medio de cultivo se puede diferenciar un grupo representativo de géneros microbianos de Salmonella. Conclusiones: CromoCen® SALM cumple con los requisitos de calidad establecidos para este tipo de productos, según la ISO 11133 vigente. La correcta formulación de los lotes, así como el cumplimiento de los requisitos de calidad aseguran el funcionamiento adecuado para lo que fue diseñado(AU)

Introduction: In Cuba, a new chromogenic and fluorogenic culture medium was developed for the detection, isolation and differentiation of Salmonella from other Gram negative bacteria. The method and medium were validated and their use was adopted as a Cuban standard. Quality assurance and control of media is essential and mandatory to ensure the reliability of the results of the analysis in which they are used. ISO 11133 establishes minimum criteria and methods to evaluate them. Objective: To evaluate the quality and performance criteria of CromoCen® SALM, as recommended in ISO 11133:2014/Amd.1:2018 to demonstrate its reliability for the microbiological analysis of food for human consumption. Methods: The physical-chemical quality indicators of three batches were evaluated and a group of them was defined to characterize its quality before and after finishing, as well to evaluate the consistency between batches. For the performance test, 12 strains of different genera were selected. The productivity ratio, the selectivity factor and the electivity of CromoCen® SALM were determined. Results: The physico-chemical evaluation showed a consistency between batches in color, homogeneity, appearance of the powder and of the prepared medium. The moisture content and pH values ranged within the established values for this product. The productivity ratio of CromoCen® SALM with respect to tryptone soy agar was greater than 50 percent, while the selectivity factor was 4. It was shown that in the culture medium a representative group of Salmonella microbial genera can be differentiated. Conclusions: CromoCen® SALM meets the quality requirements established for this type of products, according to the current ISO 11133 standard. The correct formulation of the batches, as well as the fulfillment of the quality requirements ensure the proper functionality and match the design purpose(AU)

Asunto(s)

RESUMEN

This study examines the impact of particle size on the setting behavior of tricalcium silicate powders. The setting behavior was evaluated using ISO 6876 indentation testing and isothermal induction calorimetry techniques. The objective was to compare the outcomes obtained from these methods and establish a correlation between particle size and setting characteristics. The cement pastes were manually mixed with a water-to-solid ratio of 0.66 for conducting indentation tests according to ISO 6876, while calorimetry measurements were performed using isothermal (conduction) calorimetry at room temperature. The findings demonstrate a significant influence of smaller particle sizes on accelerating the hydration process of cement pastes, resulting in a reduction of setting time by up to 24%. Moreover, the final setting times obtained through the indentation method closely approximate the inflection points of the acceleration curves acquired by calorimetry, with time deviations of less than 12% regardless of particle size.

RESUMEN

The (thio)urea and benzothiazole (BT) derivatives have been shown to have a broad spectrum of biological activities. These groups, when bonded, result in the 2-(thio)ureabenzothizoles (TBT and UBT), which could favor the physicochemical and biological properties. UBTs and TBTs are compounds of great importance in medicinal chemistry. For instance, Frentizole is a UBT derivative used for the treatment of rheumatoid arthritis and systemic lupus erythematosus. The UBTs Bentaluron and Bethabenthiazuron are commercial fungicides used as wood preservatives and herbicides in winter corn crops. On these bases, we prepared this bibliography review, which covers chemical aspects of UBTs and TBTs as potential therapeutic agents as well as their studies on the mechanisms of a variety of pharmacological activities. This work covers synthetic methodologies from 1935 to nowadays, highlighting the most recent approaches to afford UBTs and TBTs with a variety of substituents as illustrated in 42 schemes and 13 figures and concluded with 187 references. In addition, this interesting review is designed on chemical reactions of 2-aminobenzothiazoles (2ABTs) with (thio)phosgenes, iso(thio)cyanates, 1,1'-(thio)carbonyldiimidazoles [(T)CDI]s, (thio)carbamoyl chlorides, and carbon disulfide. This topic will provide information of utility for medicinal chemists dedicated to the design and synthesis of this class of compounds to be tested with respect to their biological activities and be proposed as new pharmacophores.

Asunto(s)

RESUMEN

Municipal Wastewater Treatment Plants (MWWTPs) have proven to be sources of adverse environmental impacts; however, integrated management can help improve their efficiency. Therefore, this study aims to evaluate the gap between the current management and another based on an international standard applied to WWTPMs, in order to understand their environmental commitment, and to identify the challenges and opportunities they present for the adoption or certification of an environmental management system (EMS) based on ISO 14001. For this purpose, a descriptive cross-sectional study was carried out in two MWWTPs in southern Mexico. In a first step, an automated checklist was designed based on the requirements of the ISO 14001:2015 standard and based on a modified FMEA (Failure Mode and Effects Analysis) calculation method. In a second step, a diagnosis was carried out at the MWWTPs, followed by a SWOT (Strengths, Weaknesses, Opportunities and Threats) analysis to determine internal and external factors until a series of challenges and opportunities was identified. The findings indicate that the selected MWWTPs have a wide gap that keeps them away from efficient management. Among the challenges, "limited financial resources" were identified followed by "high turnover of managerial staff", while the opportunities with the greatest potential for improvement are related to the factors "candidate for investment" and "environmental policy". The treatment plants show a weak environmental commitment, therefore rigorous action plans should be considered, not only to protect the environment but also the investment, and they should be the main promoters that challenge the private sector.

Asunto(s)

RESUMEN

Heterogeneous photocatalysis is highlighted to treat volatile organic compound (VOC) emission. Then, this work analysed the influence of palladium (Pd) content loaded in TiO2 on n-octane and iso-octane photodegradation. For this, TiO2 was loaded with Pd in different contents: 0.4%, 0.7%, and 1.0%. The samples were characterized, and the photodegradation experiments were conducted by Pd/TiO2/UV process. The characterization analyses showed that the metal presence did not change the catalyst structure or its surface area; however, it reduced the bandgap energy. The photocatalytic results proved that palladium improved n-octane degradation from 62% (pure TiO2) to 92.6% (0.4%Pd/TiO2) and, iso-octane degradation enhanced from 59% (pure TiO2) to 90.6% (0.7%Pd/TiO2); all results were obtained in the space time of 39 s. Therefore, 0.4%Pd/TiO2 and 0.7%Pd/TiO2 showed better oxidation results to degradation n-octane and iso-octane, respectively. The kinetic model of pseudo-first order showed a good fit for the data of both VOCs. Heterogeneous photocatalysis with Pd/TiO2 showed to be an adequate technique to reduce VOCs emission.

Asunto(s)

RESUMEN

Resumen Desde una aproximación neoinstitucionalista presentamos el OCI Los Cabos como una nueva organización para la participación ciudadana; según la clasificación de North, es un nuevo cuerpo político, que enfrentando los mismos retos para su autogobierno que Ostrom define para otras organizaciones en El Gobierno de los Bienes Comunes, propone además una nueva institución, el estándar internacional ISO 18091, para la gestión de calidad de los gobiernos locales, con el objetivo de promover la eficiencia y la participación ciudadana en el gobierno del bien común local, y global, según la Agenda 2030. En esta interacción compleja entre organizaciones (OCI Los Cabos) y organismos (gobierno local) con las viejas y nuevas instituciones se requiere de una participación ciudadana consciente y competente que desarrollando una inteligencia política colectiva contribuirá, sin duda, a un cambio institucional hacia una mejor gobernanza local global.

Abstract A neo-institutionalist approach to present ICO Los Cabos as a new citizen participation organization, according to North's classification, is a new 'political body' facing the same challenges for its self-government that Ostrom defines for other organizations for Governing the Commons. ICO also proposes a new institution, the international standard ISO 18091 Quality Management System for Local Governments which promotes efficiency and citizen participation for governing the common good locally and globally according to the 2030 Agenda. In this complex, the interaction between organizations (ICO Los Cabos) and other political bodies (local government) with old and new institutions requires a conscious and competent citizen participation in order to develop a collective political intelligence that undoubtedly will contribute to an institutional change towards a better global local governance.

Asunto(s)

RESUMEN

Plant defense and adaptation to adverse environmental conditions rely on gene expression control, such as mRNA transcription, processing, stability, and translation. Sudden temperature changes are common in the era of global warming; thus, understanding plant acclimation responses at the molecular level becomes imperative. mRNA translation initiation regulation has a pivotal role in achieving the synthesis of the appropriate battery of proteins needed to cope with temperature stress. In this study, we analyzed the role of translation initiation factors belonging to the eIF4E family in Arabidopsis acclimation to cold temperatures and freezing tolerance. Using knockout (KO) and overexpressing mutants of AteIF4E1 or AteIF(iso)4E, we found that AteIF4E1 but not AteIF(iso)4E overexpressing lines displayed enhanced tolerance to freezing without previous acclimation at 4°C. However, KO mutant lines, eif(iso)4e-1 and eif4e1-KO, were more sensitive to the stress. Cold acclimation in wild-type plants was accompanied by increased levels of eIF4E1 and eIF(iso)4E transcript levels, polysomes (P) enrichment, and shifts of these factors from translationally non-active to active fractions. Transcripts, previously found as candidates for eIF(iso)4E or eIF4E1 selective translation, changed their distribution in both P and total RNA in the presence of cold. Some of these transcripts changed their polysomal distribution in the mutant and one eIF4E1 overexpressing line. According to this, we propose a role of eIF4E1 and eIF(iso)4E in cold acclimation and freezing tolerance by regulating the expression of stress-related genes.

RESUMEN

Simulation is a useful and common technique to evaluate the performance of networks when the implementation of a real scenario is not available. Specifically for Wireless Body Area Networks (WBAN), it is crucial to perform evaluations in environments as close as possible to the real conditions of use. To achieve that, simulations must include different protocol layers involved in WBAN and models close to reality to create realistic simulation environments for e-health applications. To satisfy these needs, this work presents the BNS framework, a flexible tool for WBAN simulations. The proposal is an extension of the Castalia framework, which includes: (1) a new wireless channel model considering real radio-propagation over the human body; (2) an updated implementation of the WBAN MAC protocol in Castalia, with functionalities and requirements in accordance with the IEEE 802.15.6 standard; (3) a new comprehensive and configurable mobility model for simulating intra-WBAN communication; (4) a temperature module based on the Pennes bioheat transfer equation, to model the temperature of a WBAN node based on the activity of the node; and (5) a Healthcare Application Layer that implements data representation and a communication protocol between Personal Health Devices (PHD) following the ISO/IEEE 11073 standard. Three use cases are presented, where WBAN scenarios are simulated and evaluated using the proposed BNS framework. Results show that BNS is a valid and flexible tool to evaluate WBAN solutions through simulation.

Asunto(s)