RESUMEN
Ferrous xylenol gel was evaluated as a dosimeter in verifications of treatment plans for treatments of female breast tumors in external-beam radiation therapy. The dosimeter was calibrated in a cubic wax phantom irradiated with 6 and 15MV beams of an Elekta clinical linear accelerator and then used for measurements of doses in an anthropomorphic phantom of a female torso, which mimicked female breasts after modified radical mastectomy and breast-conserving surgery. Doses measured with the gel in specific locations in the phantom were compared with values predicted by treatment plans created with the XiO treatment planning system (Elekta / IMPAQ) and with results of measurements with an IBA CC13 ionization chamber in the same locations. Differences between the values measured with the gel and predicted by the treatment planning system or measured with the ionization chamber were within 1.5% in most cases. In an area of as steep dose gradient, the difference reached 2.7%, which was explicable in terms of the finite size of the gel dosimeter. The dose response of the gel is dose rate and energy independent in the ranges used in most clinical linacs. The results have shown that ferrous xylenol gels can be used as dosimeters in quality assurance in radiation therapy.
Asunto(s)
Dosímetros de Radiación , Planificación de la Radioterapia Asistida por Computador/normas , Neoplasias de la Mama/radioterapia , Femenino , Compuestos Ferrosos , Geles , Humanos , Aceleradores de Partículas , Fantasmas de Imagen , Garantía de la Calidad de Atención de Salud , Dosificación Radioterapéutica , Radioterapia de Alta Energía , XilenosRESUMEN
In Fricke dosimetry, optical density measurements are performed some time after dosimeter irradiation. Values of the diffusion coefficient of Fe(3+) in Fricke Xylenol gel (FXG) are necessary for determining the spatial distribution of the absorbed dose from measurements of the optical density. Five sets of FXG dosimeters, kept at different constant temperatures, were exposed to collimated 6 MV photons. The optical density profile, proportional to the Fe(3+) concentration, at the boundary between irradiated and non-irradiated parts of each dosimeter was measured periodically over a period of 60 h. By comparing the experimental data with a function that accounts for the unobserved initial concentration profile of Fe(3+) in the FXG, we obtained diffusion coefficients 0.30±0.05, 0.40±0.05, 0.50±0.05, 0.60±0.05 and 0.80±0.05 mm(2)/h for the temperatures 283.0±0.5, 286.0±0.5, 289.0±0.5, 292.0±0.5, and 296.0±0.5 K, respectively. The activation energy of Fe(3+) diffusion in the gel, 0.54±0.06 eV, was determined from the temperature dependence of the diffusion coefficients.
RESUMEN
The accuracy and precision are necessary factors in radiotherapy, especially for measurements involving output factors and beam profiles; in this case multileaf collimators (MLCs) and dosimeter systems are not employed to obtain an adequate absorbed dose. In this work, output factors and beam profiles using multileaf collimators were obtained through the Fricke Xylenol Gel (FXG) dosimeter irradiated with 6 MV photon beams. From the results, FXG dosimetry demonstrated to be an adequate dosimetric tool for radiotherapy applications using MLC.