RESUMEN

Pressure-relieving footwear helps prevent foot ulcers in people with diabetes. The footwear design contributes to this effect and includes the insole top cover. We aimed to assess the offloading effect of materials commonly used as insole top cover. We measured 20 participants with diabetes and peripheral neuropathy for in-shoe peak pressures while walking in their prescribed footwear with the insole covered with eight different materials, tested in randomized order. Top covers were a 3 mm or 6 mm thick open or closed-cell foam or a 6 mm thick combination of open- and closed-cell foams. We re-assessed pressures after one month of using the top cover. Peak pressures were assessed per anatomical foot region and a region of interest (i.e., previous ulceration or high barefoot pressure). Walking comfort was assessed using a 10-point Likert scale. Mean peak pressure at the region of interest varied between 167 (SD:56) and 186 (SD:65) kPa across top covers (p < 0.001) and was significantly higher for the 3 mm thick PPT than for four of the seven 6 mm thick top covers. Across 6 mm thick top covers, only two showed a significant peak pressure difference between them. Over time, peak pressures changed non-significantly from -2.7 to +47.8 kPa across top cover conditions. Comfort ratings were 8.0 to 8.4 across top covers (p = 0.863). The 6 mm thick foams provided more pressure relief than the 3 mm thick foam during walking in high-risk people with diabetes. Between the 6 mm thick foams and over time, only small differences exist. The choice of which 6 mm thick insole top cover to use may be determined more by availability, durability, ease of use, costs, or hygienic properties than by superiority in pressure-relief capacity.

Asunto(s)

Asunto(s)

Asunto(s)

RESUMEN

When designing footwear products, designers and kinesiologists usually factor in plantar surface pressure, motion capture data, and subjective comfort evaluations. However, these factors alone are not sufficient to guide the design of truly comfortable shoes. Pressure pain threshold (PPT) is a parameter that establishes a connection between psychological quantities and physical quantities. The purpose of this study was to construct a high-precision PPT map of the whole foot. Overall, 20 participants were included in this study, and an electronic, mechanical algometer was used to apply constant pressure to the participants' feet. A MATLAB graphical user interface was developed to simplify the data-collecting process and generate visual representations of the data. Finally, several high-precision unisex, different sex, and dominant side PPT maps were generated. The findings revealed that the foot dorsum area and the medial foot region exhibited the lowest PPTs (indicative of high sensitivity). Notably, the foot dorsum area near the toes displayed the highest pain sensitivity (indicative of the lowest PPT), while the plantar area demonstrated comparatively lower pain sensitivity. The heel area exhibited the lowest pain sensitivity. Simultaneously, the study observed that women's feet exhibited lower pain thresholds than men's. In the future, it is imperative to delve deeper into the correlation between short-term pain sensitivity and the daily, long-term exercise state, as well as other physiological data. This exploration will contribute to a more nuanced guide for footwear comfort design.

Asunto(s)

RESUMEN

The addition of highly responsive lightweight foam and a stiff plate in the midsole of long-distance road racing shoes has yielded significant energetic cost savings that have translated to notable improvements in performance. This new foam and stiff plate technology have since been implemented in long-distance track spikes, where performances have also improved. However, the impact of spikes with advanced footwear technology (AFT) on distance running biomechanics has been studied minimally to date. Therefore, the purpose of this study was to compare running biomechanics between two spikes which incorporate AFT (Nike ZoomX Dragonfly, Nike Air Zoom Victory) to a traditional spike (Nike Zoom Matumbo). Seventeen competitive collegiate female runners completed 60 m trials at their 5k race pace in each spike condition while outfitted with IMU sensors and plantar pressure insoles. We observed significantly lower peak ankle dorsiflexion in the Dragonfly and Victory compared to the Matumbo and lower whole foot, forefoot and rearfoot peak and average pressure in the Dragonfly compared to the Matumbo and Victory. The acute biomechanical alterations observed in this study warrant future investigation into the association between running biomechanics and racing performance in track spikes with advanced footwear technology.

RESUMEN

Introduction: Allergic contact dermatitis of the feet is a significant problem that affects the quality of life and requires attention from the medical community due to the number of studied and still unidentified allergens. The purpose of this review article is to summarize the available scientific data regarding the most common allergens that cause ACD of the feet. Methods: Nickel sulphate, neomycin sulphate, thiuram mix and colophony occupy a significant place in the prevalence of allergies. The prevalence of sensitization to rubber and leather products can vary depending on the ethno-demographic characteristics of the country, as well as the specifics of a person's professional activity, such as the use of protective waterproof shoes, increased humidity of the microclimate, and atopy in anamnesis. Results: Patch testing has been shown to be an important method for identifying allergens, however, not all footwear components are tested during patch testing with standard allergen series, requiring the use of patches made from patient shoe samples. Conclusions: Expanding the scope of patch testing to include other possible allergens is important for the accurate diagnosis of ACD of the feet and a more detailed study of those allergens that were previously considered rare.

RESUMEN

Minimalist walking shoes have been shown to improve foot muscle size and strength in active adults, but not in our previous study involving children, which could relate to the more structured footwear used in our study. Hence, this study examined the effects of true minimalists on intrinsic foot muscle size and strength, foot arch integrity, and physical function among primary school children. After a baseline assessment, 30 primary school students aged between 9 and 12 were given a pair of minimalist shoes (minimalist index = 92%) as their regular school shoes for two school terms, followed by a re-assessment. Seventeen of the 30 participants in the minimalist group completed the study. Compared to the control group, the minimalist group showed significantly increased cross-sectional area of abductor hallucis (p = 0.047, Cohen's d = 0.57) and flexor digitorum brevis (p = 0.037, Cohen's d = 0.80), increased strength of the hallux (p = 0.015, Cohen's d = 0.76) and lesser toes (p = 0.014, Cohen's d = 0.66), greater arch height (p = 0.020, Cohen's d = 0.52) and standing long jump distance (p = 0.001, Cohen's d = 9.79). The control group exhibited improved standing long jump performance only (p = 0.020, Cohen's d = 10.70). Minimalist shoes worn daily to school promote intrinsic foot muscle size and strength, and improve foot arch integrity among primary school students.

Asunto(s)

RESUMEN

BACKGROUND: This study aims to assess the impact of safety footwear (SF) on workers concerning foot-related problems, especially regarding discomfort, foot pain, and skin lesions. METHODS: A literature search of PubMed, Embase, Scopus, and Cochrane databases was performed according to PRISMA guidelines. Studies reporting foot-related problems in workers wearing SF were included. Exclusion criteria included non-English papers, reviews, laboratory and animal studies, expert opinions, letters to the editor, and grey literature. The quality assessment was performed using the Newcastle-Ottawa Scale. Descriptive statistic was used to present data. RESULT: The initial search results yielded 483 articles; 7 articles were included in the review process. Despite the extensive variety of SF, all studies consistently reported symptomatic discomfort and pain. The discomfort factors included heat, sweating, heaviness, and footwear flexibility, with primary issues in the toes, toecaps, or metatarsal-toe crease region. The pain prevalence ranged from 42.3% to 60.8% in various anatomical regions. Irritant Contact Dermatitis was the most common (97.9%) foot dermatosis, but other foot lesions were reported: dry skin (30.2%), calluses (30%), hard nails (28%), corns (27%), and blisters. CONCLUSIONS: Current SFs are designed to comply with safety regulations but are influenced by the frequent occurrence of discomfort and foot problems. The literature review identified weaknesses in certain design features. Recommendations have been proposed to improve SF development. These include addressing issues such as the selection of specific types and designs of SF based on task performance and the working environment, footwear weight, and breathable materials for moisture permeation. Considerations should also encompass distinct sizing for an optimal fit, insole application, especially for prolonged standing users, and education programs to prevent foot-related issues.

RESUMEN

BACKGROUND: In contrast with Advanced Footwear Technology-AFT running shoes for long-distance, little is known about AFT sprint spikes on performance and acceleration parameters. However, their use has become widespread since the Tokyo 2020 Olympics, and knowledge of their effects would seem to be an essential starting point before any clinical or socio-economic considerations. OBJECTIVES: Our objectives were to determine intra- and inter-subject sprinting performance modifications with Nike® AFT spikes (NAS) compared to standard spiked-shoes (SS). METHODS: Healthy regional to national sprint athletes (n = 21, ≥ 750 pts World Athletics) performed 16 repetitions of 30-m sprints with either the NAS or SS condition during a single session, based on the multiple N-of-1 method, with pairwise randomisation and double-blind procedure. Time on 30-m sprints (Stalker radar), force-velocity profile (F0, V0, Vmax, Pmax, RF, DRF and FVP slope), and confounding factors (wind and shoe mass) were measured. Statistical analyses included a mixed linear regression model for group analyses, and randomisation test inversion and non-overlap-of-all-pair (NAP) methods for intra-individual analysis. RESULTS: NAS improved 30-m time by a mean of - 0.02 s (SMD = 0.4, p = 0.014), with no interaction with any confounding factors. Significant changes were seen in velocity (Vmax : SMD = 0.9, p < 0.001; V0: SMD = 0.7, p < 0.001) and the horizontal ratio of force (RFmax: SMD = 0.5, p = 0.043), with no changes observed in force production. Whatever the footwear, one unit of positive wind (+ 1 m.s- 1 ) improved performance by - 0.03 s (p < 0.001). At an individual level, four athletes improved (NAP ≥ 0.69), and one had a statistical decrease in performance. Changes in F-V profiles were largely individual. CONCLUSIONS: A positive effect on sprint acceleration characteristics was observed when using Nike® AFT spikes, due to an increase in velocity and the horizontal ratio of force. A major variability in inter-individual response justifies single-case experimental designs for research on the topic. TRIAL REGISTRATION NUMBER: NCT05881148.

RESUMEN

The Nike Vaporfly 4% (VP4) shoe is popular due to its unique design and reported performance benefits. However, the underlying mechanisms responsible for the improvements remain unclear. One proposed mechanism is the teeter-totter effect. This study aimed to 1) experimentally test the teeter-totter theory by estimating the teeter-totter moment (MTT) in the VP4 compared to a flat shoe (CONTROL) and 2) quantify the change in the anterior-posterior position of the centre of pressure (Δxa-p) in the VP4 compared to the CONTROL. Plantar pressures and high-speed video were recorded from 15 runners in two shoe conditions. The VP4 generated a larger propulsion moment, MP, (∫MPdt = 90.46 ± 38.87 Nms; p < 0.001, d = 1.95), suggesting the presence of an MTT in the VP4 (∫MTTdt = 57.16 ± 24.35 Nms) when compared to the CONTROL (∫MPdt = 33.30 ± 14.52 Nms). Δxa-p was greater in the VP4 (Δxa-p = 9.48 ± 6.08 mm; p < 0.001, d = 2.07) compared to the CONTROL (Δxa-p = 0.54 ± 0.67 mm). This study provides a methodological proof-of-concept for the teeter-totter theory. The findings highlight the possibility of a teeter-totter effect resulting in greater heel propulsion while running in an AFT shoe construction, assuming a constant muscle moment and pivot point.

RESUMEN

Aims: Adherence to therapeutic footwear is vital for effective diabetic foot ulcer prevention and treatment. Understanding the key adherence factors and potential barriers is important for footwear design and implementation. Our team is creating intelligent offloading footwear to prevent lower extremity amputations in people living with diabetes (PLwD). This exploratory study assessed the ability of the established Unified Theory of Acceptance and Use of Technology (UTAUT) model to predict behavioral intention to use or recommend this intelligent offloading footwear by PLwD, caregivers of PLwD, or medical professionals treating PLwD. Methods: Online and paper questionnaires were implemented to assess the impact of the UTAUT model factors (performance expectancy, effort expectancy, social influence, facilitating conditions) and psychosocial factors (attitude, anxiety, self-efficacy) on the overall behavioral intention to use the footwear. Furthermore, factors influencing potential acceptance and rejection of the footwear were explored. Results: Patients (4.0/5) and medical professionals (4.1/5) showed a behavioral intention to "agree" to use or recommend the footwear when it becomes available. Structural equation modeling showed that the UTAUT constructed model may not be the best indicator for behavioral intention here based on a lack of statistical significance. However, the logistic regression modeling showed that the social influence for PLwD (p=0.004) and the attitude toward the footwear for medical professionals (p=0.001) may be the most important when designing and implementing the footwear, though several other factors (performance expectancy, effort expectancy, facilitating conditions, and self-efficacy) were also important for one or both of these populations. Additionally, cost and clinician support were shown to be important factors influencing potential acceptance of the footwear. Conclusions: The study found promising intention to use the intelligent footwear in the future. This highlights the need to continue future development and implementation of the footwear to incorporate these results, thus improving the likelihood of high adherence of the footwear.

Asunto(s)

RESUMEN

Background/Objectives: Plantar fasciitis (PF) is a common condition that causes heel pain. While various conservative treatment modalities for PF exist, no previous studies have investigated the effectiveness of shoe rotation (ShR) in patients with PF pain. This study aimed to compare the therapeutic effectiveness of ShR with that of two conventional treatments for PF-namely, foot orthosis (FO) and physical therapy (PT). Methods: Charts of 42 patients with heel pain were retrospectively reviewed. Participants were allocated to one of three treatment groups: the ShR group, the customized FO group, and the PT group. Pain and functional outcomes were assessed using the Visual Analog Scale (VAS), Digital Pain Scale (DPS), Foot Function Index (FFI), Foot Pain and Function Scale (FPFS), and American Orthopedic Foot and Ankle Society Ankle-Hindfoot Scale (AOFAS-AHS) at baseline and at 4 and 12 weeks after the intervention. Results: The ShR, FO, and PT groups all showed improvements, with statistically significant decreases in VAS, DPS, and FFI scores and significant increases in FPFS and AOFAS-AHS scores over time (p < 0.05). All three interventions resulted in significant improvements from baseline to 4 weeks and further to 12 weeks (p < 0.05). The ShR group exhibited a slightly larger effect on all measurements than the other groups. Conclusions: ShR, FO, and PT contributed to pain reduction and functional improvement, and alternating the shoes alleviated PF pain. These results suggest a new approach to managing PF and serve as a basis for providing convenient treatment for patients with PF.

RESUMEN

OBJECTIVE: To investigate relationships between static foot posture, dynamic plantar foot forces and knee pain in people with medial knee osteoarthritis (OA). DESIGN: Data from 164 participants with symptomatic, moderate to severe radiographic medial knee OA were analysed. Knee pain was self-reported using a numerical rating scale (NRS; scores 0-10; higher scores worse) and the Knee Injury and Osteoarthritis Outcome Score pain subscale (KOOS; scores 0-100; lower scores worse). Static foot posture was assessed using clinical tests (foot posture index, foot mobility magnitude, navicular drop). Dynamic plantar foot forces (lateral, medial, whole foot, medial-lateral ratio, arch index) were measured using an in-shoe plantar pressure system while walking. Relationships between foot posture and plantar forces (independent variables) and pain (dependent variables) were evaluated using linear regression models, unadjusted and adjusted for sex, walking speed, Kellgren & Lawrence grade, shoe category, and body mass (for dynamic plantar foot forces). RESULTS: No measure of static foot posture was associated with any knee pain measure. Higher medial-lateral foot force ratio at midstance, and a higher arch index during overall stance, were weakly associated with higher knee pain on the NRS (regression coefficient = 0.69, 95% confidence interval (CI) 0.09 to 1.28) and KOOS (coefficient=3.03, 95% CI 0.71 to 5.35) pain scales, respectively. CONCLUSION: Dynamic plantar foot forces, but not static foot posture, were associated with knee pain in people with medial knee OA. However, the amount of pain explained by increases in plantar foot force was small; thus, these associations are unlikely to be clinically meaningful.

Asunto(s)

RESUMEN

BACKGROUND: Technological running shoes have become increasingly popular, leading to improvements in performance. However, their long-term effects on foot musculature and joint mobility have not been thoroughly studied. OBJECTIVE: To compare the activation of the intrinsic foot muscles between runners wearing technological footwear and barefoot runners. Secondary objectives included assessing ankle dorsiflexion (DF) range of motion (ROM) and dynamic postural control in both groups. METHODS: A cross-sectional study was conducted involving 22 technological footwear runners and 22 barefoot runners. Ultrasonography was used to measure the thickness of the plantar fascia (PF) and the quadratus plantae (QP), abductor digiti minimus (ADM), abductor hallucis (AH), and flexor hallucis longus (FHL) muscles. Ankle mobility and dynamic postural control were also recorded. RESULTS: Ultrasonography measurements showed statistically significant differences for PF thickness (mean difference [MD]: -0.10 cm; 95% CI: -0.13, -0.05 cm), QP cross-sectional area (CSA) (MD: -0.45 cm2; 95% CI: -0.77, -0.12 cm2), ADM CSA (MD: -0.49 cm2; 95% CI: -0.70, -0.17 cm2), and FHL thickness (MD: 0.82 cm; 95% CI: 0.53, 1.09 cm), with all measurements being lower in the group wearing technological footwear compared to the barefoot runners. Ankle DF ROM was also significantly greater for the barefoot runners (MD: -5.1°; 95% CI: -8.6, -1.7°). CONCLUSIONS: These findings suggest potential implications for the foot musculature and ankle mobility in runners using technological footwear.

Asunto(s)

RESUMEN

BACKGROUND: Minimalistic footwear provides adequate toe space, tripod function, improving foot function, muscle activation and stability during walking similarly to barefoot walking. Due to the increasing popularity of this specific footwear, there is a lack of research focusing on general users of minimalistic footwear. RESEARCH QUESTION: Does annual walking in minimalistic footwear affect gait biomechanics? METHODS: Cross-sectional study involving twenty participants in a minimalistic footwear group with both experience (MFE) and no experience (NMFE). Participants walked in three different conditions (barefoot, minimalistic, and neutral footwear) in the laboratory at normal human walking speed. RESULTS: A significant main effect of groups regardless of footwear conditions show significantly greater values during walking in minimalistic footwear and barefoot in the stride length (p=0.035, p=0.003, respectively), and stride width (p=0.047, p=0.028, respectively) in the NMFE group compared to MFE group. The significant differences in the main effects of footwear regardless of experience were found in stance time (p<0.001), steps per minute (p<0.001), stride length (<0.001), foot adduction in TO (p<0.001), foot eversion angle in IC and TO (p<0.001, p<0.001, respectively), foot progression angle (p<0.001), ankle dorsiflexion angle in IC and TO (p<0.001, p<0.001, respectively), in ankle eversion angle in IC and TO (p<0.001, p<0.001, respectively), knee flexion angle in IC and TO (p<0.001; p<0.001, respectively), and in knee flexion range of motion (p<0.001). SIGNIFICANCE: Based on our findings, barefoot walking should be used primarily during daily activities if the environment is conducive. Only one year of experience with minimalistic footwear seems insufficient and an intervention should be incorporated to change the gait pattern when transitioning to full minimalistic footwear walking.

Asunto(s)

RESUMEN

AIMS: Incorrectly fitting footwear (IFF) poses a risk of trauma to at-risk feet with diabetes. The aim of this systematic review was to summarise and assess the evidence that IFF is a statistically significant cause of ulceration. METHODS: We searched PubMed, Scopus, Web of Science and Google Scholar for English-language peer-reviewed studies reporting the number or percentage of people with diabetes-related foot ulceration (DFU) attributed to wearing IFF and included a physical examination of the footwear worn. Two independent reviewers assessed the risk of bias using the Newcastle-Ottawa scale. RESULTS: 4318 results were retrieved excluding duplicates with 45 studies shortlisted. Ten studies met the inclusion criteria with most rated as fair (n = 6) or good (n = 3). There is some evidence that DFU is significantly associated with IFF, but this is limited: only 3 of 10 included studies found a statistically significant percentage of those with DFU were wearing IFF or inappropriate footwear which included fastening, material, type or fit (15.0%-93.3%). Risk of bias in these three studies ranged from 'fair' to 'poor'. IFF definitions were often unreported or heterogeneous. Only one study reported IFF-related ulcer sites: 70% were at plantar hallux/toes and 10% at plantar metatarsal heads. CONCLUSIONS: There is some evidence that IFF is a cause of DFU, but further research is needed, which defines IFF, and methodically records footwear assessment, ulcer location and physical activity. Researchers need to uncover why IFF is worn and if this is due to economic factors, a need for footwear education or other reasons.

RESUMEN

Introduction: A concern expressed by the clinical community is that the constraint of motion provided by an ankle foot orthosis (AFO) may lead the user to become dependent on its stiffness, leading to learned non-use. To examine this, we hypothesized that using an experimental AFO-footwear combination (exAFO-FC) that constrains ankle motion during walking would result in reduced soleus and tibialis anterior EMG compared to free (exAFO-FC) and control (no AFO, footwear only) conditions. Method: A total of 14 healthy subjects walked at their preferred speed (1.34 ± 0.09 m·s-1) for 15 min, in three conditions, namely, control, free, and stop. Results: During the stance phase of walking in the stop condition, ipsilateral soleus integrated EMG (iEMG) declined linearly, culminating in a 32.1% reduction compared to the control condition in the final 5 min interval of the protocol. In contrast, ipsilateral tibialis anterior iEMG declined in a variable fashion culminating in an 11.2% reduction compared to control in the final 5 min interval. During the swing phase, the tibialis anterior iEMG increased by 6.6% compared to the control condition during the final 5 min interval. The contralateral soleus and tibialis anterior exhibited increased iEMG in the stop condition. Discussion: An AFO-FC functions as a biomechanical motion control device that influences the neural control system and alters the output of muscles experiencing constraints of motion.

RESUMEN

BACKGROUND: Motor coordination concerns are estimated to affect 5%-6% of school-aged children. Motor coordination concerns have variable impact on children's lives, with gait and balance often affected. Textured insoles have demonstrated positive impact on balance and gait in adults with motor coordination disorders related to disease or the ageing process. The efficacy of textured insoles in children is unknown. Our primary aim was to identify the feasibility of conducting a randomised controlled trial involving children with motor control issues. The secondary aim was to identify the limited efficacy of textured insoles on gross motor assessment balance domains and endurance in children with movement difficulties. METHODS: An assessor-blinded, randomised feasibility study. We advertised for children between the ages of 5-12 years, with an existing diagnosis or developmental coordination disorder or gross motor skill levels assessed as 15th percentile or below on a norm-referenced, reliable and validated scale across two cities within Australia. We randomly allocated children to shoes only or shoes and textured insoles. We collected data across six feasibility domains; demand (recruitment), acceptability (via interview) implementation (adherence), practicality (via interview and adverse events), adaptation (via interview) and limited efficacy testing (6-min walk test and balance domain of Movement ABC-2 at baseline and 4 weeks). RESULTS: There were 15 children randomised into two groups (eight received shoes alone, seven received shoes and textured insoles). We experienced moderate demand, with 46 potential participants. The insoles were acceptable, however, some parents reported footwear fixture issues requiring modification. The 6-min walk test was described as problematic for children, despite all but one child completing. Social factors impacted adherence and footwear wear time in both groups. Families reported appointment locations and parking impacting practicality. Underpowered, non-significant small to moderate effect sizes were observed for different outcome measures. Improvement in balance measures favoured the shoe and insole group, while gait velocity increase favoured the shoe only group. CONCLUSION: Our research indicates that this trial design is feasible with modifications such as recruiting with a larger multi-disciplinary organisation, providing velcro shoe fixtures and using a shorter timed walk test. Furthermore, progressing to a larger well-powered randomised control trial is justified considering our preliminary, albeit underpowered, efficacy findings. TRIAL REGISTRATION: This trial was retrospectively registered with the Australian and New Zealand Clinical Trial Registration: ACTRN12624000160538.

Asunto(s)