RESUMEN
The main objective of this work was to investigate the feasibility of using vacuum ultraviolet (VUV, 185 + 254 nm) and ultraviolet (UV, 254 nm) for the reduction of dissolved organic nitrogen (DON) and haloacetonitrile formation potential (HANFP) of surface water and treated effluent wastewater samples. The results showed that the reduction of dissolved organic carbon (DOC), DON, hydrophobicity (HPO), absorbance at 254 nm (UV254), and fluorescence excitation-emission matrix (FEEM) of both water samples by VUV was higher compared to using UV. The addition of H2O2 remarkably improved the performances of VUV and UV. VUV/H2O2 exhibited the highest removal efficiency for DOC and DON. Even though HANFP increased at the early stage, its concentration decreased (19-72%) at the end of treatment (60 min). Decreases in DON (30-41%) and DOC (51-57%) led to HANFP reduction (53-72%). Moreover, FEEM revealed that substantial reduction in soluble microbial product-like compounds (nitrogen-rich organic) had a strong correlation with HANFP reduction, implying that this group of compounds act as a main precursor of HANs. The VUV/H2O2 system significantly reduced HANFP more than UV/H2O2 and therefore is suitable for controlling HAN precursors and HAN formation in drinking water and reclaimed wastewater.
Asunto(s)
Contaminantes Químicos del Agua , Purificación del Agua , Desinfección , Peróxido de Hidrógeno , Nitrógeno , Rayos Ultravioleta , Vacio , Contaminantes Químicos del Agua/análisisRESUMEN
Advanced organic characterisation methods were used to investigate the suitability of lab-based model compounds as surrogates to mimic the dissolved organic matter (DOM) of both first and second generation fermentation industry effluents. Comparisons to both humic acid and synthetic melanoidin revealed the limitations of using these model organic compounds in treatment studies of biorefinery effluent. Rapid resin fractionation (RRF) of effluent from yeast cultivated on molasses suggests that 64% of the dissolved organic matter is present in the form of very hydrophobic acid (VHPhoA) compounds. Molecular weight distribution by size exclusion chromatography (LC-OCND) and fluorophore specific intensity by fluorescence excitation and emission matrix (FEEM) of the yeast effluent was comparable to signatures from humic acid. This indicates that humic acid would be a suitable model compound for oxidation, adsorption and filtration studies. Differences among the fermentation industry effluents were found to be inherently dependent on both the biochemistry of yeast and processes used. RRF and FEEM spectra of effluent from bioethanol production on cellulosic feed highlighted a preponderance of neutral compounds with fluorophore specific intensity characteristic of non-humic compounds with a higher fraction of neutral compounds (41%) relative to VHPhoA (38%), SHPhoA (16%) and HPhi (5%) moieties. Findings were not consistent with commercial humics, synthetic melanoidins or other cellulosic and lignocellulosic based effluents from Kraft and Thermomechanical pulp mills since the actual pollutants are heavily dependent on the pre-treatment process. This suggests further work is required to develop a model compound for treatment studies of effluent from second generation bio-refineries.
Asunto(s)
Fermentación , Sustancias Húmicas , Modelos Teóricos , Compuestos Orgánicos , Eliminación de Residuos Líquidos/métodos , Adsorción , Contaminantes Ambientales/análisis , Filtración , Sustancias Húmicas/análisisRESUMEN
Assimilable organic carbon (AOC) serves as an indicator of the biostability of drinking water distribution systems; however, the properties of the released organic metabolites by Pseudomonas fluorescens (P17) and Spirillum (NOX) used in AOC bioassays are seldom discussed. In this study, fluorescence excitation emission matrix (FEEM) was selected to characterize organic metabolites after substrate biotransformation and their divergences at different growth stages of both strains in AOC bioassay. Excellent correlation between ATP and colony-forming units (CFUs) was observed for both strains. The concentration of ATP per colony was six times higher in the P17 strain than in the NOX strain. A retarding phenomenon was observed for the NOX strain in the presence of high acetate-C content (100-150⯵g acetate-C/L). The fluorescence wavelength peaks were wider for the protein-like substance released by the P17 strain than for those released by the NOX strain. However, fluorescent fulvic-like substances only existed in the NOX strain. Relative humus accumulation (RHA), the ratio of protein-like fluorescence intensity to humus-like fluorescence intensity, decreased in the P17 strain but substantially increased in the NOX strain in the logarithmic growth phase. RHA showed a descending trend for the P17 strain as compared to that of the NOX strain during the progress from logarithmic to stationary growth phase at three different acetate-C concentrations; however, the opposite was observed at 100⯵g acetate-C/L, indicating that high acetate-C content may affect the properties of released organic matter from both strains.
Asunto(s)
Carbono/análisis , Agua Potable/normas , Pseudomonas fluorescens/metabolismo , Spirillum/metabolismo , Acetatos/farmacología , Colorantes , Compuestos Orgánicos/análisis , Compuestos Orgánicos/metabolismo , Purificación del AguaRESUMEN
In order to improve our understanding of bio-activated carbon (BAC) filter, the water quality of influent and effluent treated with BAC in a drinking water treatment plant (DWTP) of Shanghai during 2015 was valued. Combining the results from UV254, SUVA254, dissolved organic carbon (DOC) and scanning electron microscopic (SEM), it is found that performance of BAC treatment will be affected by characteristics of activated carbon (AC), which is relevant to the type of activated carbon (including shape and operating time) in this study. Fluorescence excitation-emission matrix (FEEM) shows that the humification index (HIX) and index of recent autochthonous contribution (BIX) is a reliable indicator to descript the variation of dissolved organic matter (DOM) during BAC process. The pattern of variation in BIX and HIX implies that soluble microbial products (SMPs) are formed and humic-like substances are removed during BAC treatment, which is also confirmed by the change of peaks of FEEM in BAC effluent. Large, positive correlations between SUVA254 and disinfection by-products formation potential yield (DBPFP yield) demonstrate that UV-absorbing DOM is directly related to the generation of DBPs. Poor correlations of HIX with DBPFP suggest that non-humic substances with UV-absorbing properties play an important role in the generation of DBPs in water with low SUVA254. Finally, strong but negative correlations between BIX and DBPFP suggest that vigorous microbial metabolism of BAC results in a decrease in DBPFP. However, the DBPFP yield will be enhanced for the generation of SMPs by BAC, especially in summer.
Asunto(s)
Carbón Orgánico/química , Desinfectantes/análisis , Agua Potable/química , Contaminantes Químicos del Agua/análisis , Purificación del Agua , Calidad del Agua , China , Ciudades , FluorescenciaRESUMEN
Algal blooms can seriously affect the operation of water treatment processes including low pressure (micro- and ultra-filtration) and high pressure (nanofiltration and reverse osmosis) membranes mainly due to accumulation of algal-derived organic matter (AOM). In this study, the different components of AOM extracted from three common species of bloom-forming algae (Alexandrium tamarense, Chaetoceros affinis and Microcystis sp.) were characterised employing various analytical techniques, such as liquid chromatography - organic carbon detection, fluorescence spectroscopy, fourier transform infrared spectroscopy, alcian blue staining and lectin staining coupled with laser scanning microscopy to indentify its composition and force measurement using atomic force microscopy to measure its stickiness. Batch culture monitoring of the three algal species illustrated varying characteristics in terms of growth pattern, cell concentration and AOM release. The AOM produced by the three algal species comprised mainly biopolymers (e.g., polysaccharides and proteins) but some refractory compounds (e.g., humic-like substances) and other low molecular weight acid and neutral compounds were also found. Biopolymers containing fucose and sulphated functional groups were found in all AOM samples while the presence of other functional groups varied between different species. A large majority (>80%) of the acidic polysaccharide components (in terms of transparent exopolymer particles) were found in the colloidal size range (<0.4 µm). The relative stickiness of AOM substantially varied between algal species and that the cohesion between AOM-coated surfaces was much stronger than the adhesion of AOM on AOM-free surfaces. Overall, the composition as well as the physico-chemical characteristics (e.g., stickiness) of AOM will likely dictate the severity of fouling in membrane systems during algal blooms.
Asunto(s)
Diatomeas/metabolismo , Dinoflagelados/metabolismo , Eutrofización , Microcystis/metabolismo , Compuestos Orgánicos/análisisRESUMEN
Organic matter (OM) causes many problems in drinking water treatment. It is difficult to monitor OM concentrations and character during treatment processes due to its complexity. Fluorescence spectroscopy is a promising tool for online monitoring. In this study, a unique dataset of fluorescence excitation emission matrixes (EEMs) (n = 867) was collected from all treatment stages of five drinking water treatment plants (WTPs) situated in diverse locations from subtropical to temperate climate. The WTPs incorporated various water sources, treatment processes and OM removal efficiencies (DOC removal 0%-68%). Despite these differences, four common fluorescence PARAFAC components were identified for characterisation of OM concentration and treatability. Moreover, fluorescence component ratios showed site-specific statistically significant correlations with OM removal, which contrasted with correlations between specific UV absorbance at 254 nm (SUVA) and OM removal that were not statistically significant. This indicates that use of fluorescence spectroscopy may be a more robust alternative for predicting DOC removal than UV spectroscopy. Based on the identified fluorescence components, four optical locations were selected in order to move towards single wavelength online OM monitoring.