RESUMEN

Despite the versatile potential applications of urea, its unfavorable characteristics for conventional treatment methods hinder its utilization. Therefore, this study developed vesicle-like iron phosphate-based carbon (IP@C400) as a breakthrough urea removal and recovery material for a wide range of urea-containing sources. IP@C400 rapidly exhibited an exceptional capacity (2242 mg/g in 1h) across a wide range of pH, even in synthetic hemodialysis wastewater with high urea concentrations and diverse co-existing components, compared with the 60 prominent adsorbents. The adsorption process followed dual Pseudo-kinetic, Langmuir-isotherm models with the involvement of primary robust physical (i.e., H-bonding and electrostatic interaction) and chemical mechanisms (i.e., hydrolysis). Remarkably, IP@C400 can maintain high urea removal (90 %) or recovery efficiency (95 %) even after 10 cycles with minimal leakages of Fe and P (far below WHO and EUWFD standards)-a significant improvement over disposable options. IP@C400 could also perform efficiently on batch and a new approach integrating with a naturally accessible material based on the fixed-bed column using low-range urea realistic samples, achieving 65.2 L water over 10 cycles with undetected urea, neutral pH, and well-aligned water safety standards with a minimal adsorbent dose (0.1 g.L-1) and economical cost ($0.05 L-1). Lastly, its environmentally friendly nature, which contains essential nutrients for plant growth, further enhances its recyclability after release. Thus, IP@C400 offers a solution to environmental sustainability and the urgent ultrapure water issue that industries are facing.

RESUMEN

BACKGROUND: Phosphorus is a vital mineral crucial for various physiological functions. Critically ill trauma patients frequently experience hypophosphatemia during the immediate post-traumatic phase, potentially impacting outcomes. This study aims to investigate the incidence of early hypophosphatemia in critically major trauma patients. METHODS: In this prospective observational study, trauma patients admitted to the intensive care unit (ICU) within one day were enrolled. These patients were categorized into Hypo-P groups and Non-hypo groups based on the development of new-onset hypophosphatemia within 72 h after feeding. The primary outcome assessed was the incidence of new-onset hypophosphatemia. The secondary outcomes included ICU and hospital stay, ventilation duration, and mortality. RESULTS: 76.1% of patients developed a new onset of hypophosphatemia within 72 h after feeding. The Hypo-P group had significantly longer ICU stays (8.1 days ± 5.5 vs. 4.4 days ± 3.1; p = 0.0251) and trends towards extended hospital stay, ventilation duration, and higher mortality. Additionally, they demonstrated significantly higher urine fractional excretion of phosphate (FEPO4) on the first ICU day (29.2% ± 14.23 vs. 19.5% ± 8.39; p = 0.0242). CONCLUSION: Critically ill trauma patients exhibited a significantly higher incidence of early hypophosphatemia than typical ICU rates, indicating their heightened vulnerability. The significantly high urine FEPO4 underscores the crucial role of renal loss in disrupting phosphate metabolism in this early acute phase after trauma. A significant correlation was observed between hypophosphatemia and longer ICU stays. Monitoring and managing phosphate levels may influence outcomes, warranting further investigation.

RESUMEN

The efficient segregation of radioactive nuclides from low-level radioactive liquid waste (LLRW) is paramount for nuclear emergency protocols and waste minimization. Here, we synthesized Na3FePO4CO3 (NFPC) via a one-pot hydrothermal method and applied it for the first time to the selective separation of Sr2+ from simulated LLRW. Static adsorption experimental results indicated that the distribution coefficient Kd remained above 5000 mL·g-1, even when the concentration of interfering ions was more than 40 times that of Sr2+. Furthermore, the removal efficiency of Sr2+ showed no significant change within the pH range of 4 to 9. The adsorption of Sr2+ fitted the pseudo-second-order kinetic model and the Langmuir isotherm model, with an equilibrium time of 36 min and a maximum adsorption capacity of 99.6 mg·g-1. Notably, the adsorption capacity was observed to increment marginally with an elevation in temperature. Characterization analyses and density functional theory (DFT) calculations elucidated the adsorption mechanism, demonstrating that Sr2+ initially engaged in an ion exchange reaction with Na+. Subsequently, Sr2+ coordinated with four oxygen atoms on the NFPC (100) facet, establishing a robust Sr-O bond via orbital hybridization.

RESUMEN

Layered Na2FePO4F (NFPF) cathode material has received widespread attention due to its green nontoxicity, abundant raw materials, and low cost. However, its poor inherent electronic conductivity and sluggish sodium ion transportation seriously impede its capacity delivery and cycling stability. In this work, NFPF by Ti doping and conformal carbon layer coating via solid-state reaction is modified. The results of experimental study and density functional theory calculations reveal that Ti doping enhances intrinsic conductivity, accelerates Na-ion transport, and generates more Na-ion storage sites, and pyrolytic carbon from polyvinylpyrrolidone (PVP) uniformly coated on the NFPF surface improves the surface/interface conductivity and suppresses the side reactions. Under the combined effect of Ti doping and carbon coating, the optimized NFPF (marked as 5T-NF@C) exhibits excellent electrochemical performance, with a high capacity of 108.4 mAh g-1 at 0.2C, a considerable capacity of 80.0 mAh g-1 even at high current density of 10C, and a high capacity retention rate of 81.8% after 2000 cycles at 10C. When assembled into a full cell with a hard carbon anode, 5T-NF@C also show good applicability. This work indicates that co-modification of Ti doping and carbon coating makes NFPF achieve high rate and long cycle performance for sodium-ion batteries.

RESUMEN

Olivine FePO4 is widely regarded as an optimal cathode material for sodium-ion batteries due to its impressive theoretical capacity of 177.7 mAh g-1. Nonetheless, the material's limited application stems from its intrinsic low electronic and ionic conductivities and ion diffusion rate. Previously, most modifications of olivine FePO4 are conducted through electrochemical or ion exchange processes in organic solvents, which severely restricted its potential for large-scale applications. In this research, a novel water-based ion exchange method is proposed for the synthesis of Ni-doped, Mn-doped, and Ni, Mn co-doped FePO4@C, which is non-toxic, cost-effective, and demonstrating promising prospects for various applications. Fe2.7Mn0.2Ni0.1PO4@C (0.2Mn0.1Ni-FP@C) is synthesized by a straightforward ion exchange method in aqueous media. The material exhibits a discharge capacity of 154.4 mAh g-1 at 0.1C rate. After 300 cycles at 1C, the capacity retention rate remains at 70.7 %. Numerous tests and calculations conducted in this study demonstrate that 0.2Mn0.1Ni-FP@C, modified through Mn3+ and Ni3+ co-doping, exhibits superior electrochemical performance due to its enhanced electronic conductivity and ion diffusion rate.

RESUMEN

Ultrasonic-assisted precipitation was employed to sustainably isolate Fe in the hydrochloric acid lixivium of low-grade laterite for the synthesis of battery-grade iron phosphate. The recovery efficiency of Ni and Co exceeded 99%, while the removal efficiency of the Fe impurity reached a maximum of 95%. Precipitation parameters for the selective isolation of Fe (MgO precipitant, pH 1, 70-80 °C) were optimized and used in ultrasonic precipitation experiments. The use of ultrasonic waves in the precipitation process enhanced micromixing by reducing the size of primary grains and mitigating particle agglomeration, thereby significantly improving the purity of the isolated compound and providing high-quality iron phosphate (FePO4·2H2O). The LiFePO4/C composite prepared from as-precipitated FePO4 exhibited excellent electrochemical performance, with a discharge capacity of 149.7 mAh/g at 0.1 C and 136.3 mAh/g at 0.5 C after 100 cycles, retaining almost 100% cycling efficiency. This novel and facile method for iron removal from laterite acid lixivium not only efficiently removes excess iron impurities leached due to the poor selectivity of hydrochloric acid, but also enables the high-value utilization of these iron impurities. It enhances economic benefits while simultaneously alleviating environmental pressure.

RESUMEN

Solid-state electrolytes (SSEs) play a crucial role in developing lithium metal batteries (LMBs) with high safety and energy density. Exploring SSEs with excellent comprehensive performance is the key to achieving the practical application of LMBs. In this work, the great potential of Li0.95 Na0.05 FePO4 (LNFP) as an ideal SSE due to its enhanced ionic conductivity and reliable stability in contact with lithium metal anode is demonstrated. Moreover, LNFP-based composite solid electrolytes (CSEs) are prepared to further improve electronic insulation and interface stability. The CSE containing 50 wt% of LNFP (LNFP50) shows high ionic conductivity (3.58 × 10-4 S cm-1 at 25 °C) and good compatibility with Li metal anode and cathodes. Surprisingly, the LMB of Li|LNFP50|LiFePO4 cell at 0.5 C current density shows good cycling stability (151.5 mAh g-1 for 500 cycles, 96.5% capacity retention, and 99.3% Coulombic efficiency), and high-energy LMB of Li|LNFP50|Li[Ni0.8 Co0.1 Mn0.1 ]O2 cell maintains 80% capacity retention after 170 cycles, which are better than that with traditional liquid electrolytes (LEs). This investigation offers a new approach to commercializing SSEs with excellent comprehensive performance for high-performance LMBs.

RESUMEN

Efficient and clean extraction lithium (Li) from spent LiFePO4 batteries (LIBs) still remains a challenge. In this paper, a green deep eutectic solvent (DES) based on ethylene glycol (EG) and choline chloride (CC), combined with ozone (O3) from air source, realized highly selective leaching Li from LiFePO4 in situ for the first time. The influence of experimental parameters on Li and Fe leaching efficiencies (ηLi, ηFe) were studied by orthogonal and single-factor tests, and ηLi ≥ 92.2% while ηFe ≤ 1.6% were obtained under the optimal conditions (6 h, 20 g/L, 8EG:1CC, 40 °C). The impurity Fe in the filtrate was completely precipitated as amorphous FePO4·3H2O after heating (150 °C, 0.5 h), achieving a pure Li-solution. The leaching mechanism elucidated that the synergistic effect (acidification, replacement and oxidation reaction) between the DES and O3 determined the phase transition of Li and Fe, promoting the efficient selective extraction of Li and in-situ separation of Fe (FePO4). The average ηLi and ηFe were separately 85.4% and 2.0% after ten cycles of the 8EG:1CC, indicative of its' excellent reusability. Meanwhile, LiCl was recovered from the filtrate. This process avoided the use of strong acid/alkali and discharge of waste water, providing fresh perspectives on the green recovery of spent LiFePO4 batteries.

Asunto(s)

RESUMEN

FePO4 (FP) particles with a mesoporous structure amalgamated by nanoscale primary crystals were controllably prepared using an ultrasound-intensified turbulence T-junction microreactor (UTISR). The use of this type of reaction system can effectively enhance the micro-mixing and remarkably improve the mass transfer and chemical reaction rates. Consequently, the synergistic effects of the impinging streams and ultrasonic irradiation on the formation of mesoporous structure of FP nanoparticles have been systematically investigated through experimental validation and CFD simulation. The results revealed that the FP particles with a mesoporous structure can be well synthesised by precisely controlling the operation parameters by applying ultrasound irradiation with the input power in the range of 0-900 W and the impinging stream volumetric flow rate in the range of 17.15-257.22 mL·min-1. The findings obtained from the experimental observation and CFD modelling has clearly indicated that there exists a strong correlation between the particle size, morphology, and the local turbulence shear. The application of ultrasonic irradiation can effectively intensify the local turbulence shear in the reactor even at low Reynolds number based on the impinging stream diameter (Re < 2000), leading to an effective reduction in the particle size (from 273.48 to 56.1 nm) and an increase in the specific surface area (from 21.97 to 114.97 m2·g-1) of FP samples. The FPirregularly-shaped particles prepared by UTISR exhibited a mesoporous structure with a particle size of 56.10 nm, a specific surface area of 114.97 m2·g-1and a total pore adsorption volume of 0.570 cm3·g-1 when the volumetric flow rate and ultrasound power are 85.74 mL·min-1and 600 W, respectively.

RESUMEN

The recycling of LiFePO4 from degraded lithium-ion batteries (LIBs) from electric vehicles (EVs) has gained significant attention due to resource, environment, and cost considerations. Through neutron diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy, we revealed continuous lithium loss during battery cycling, resulting in a Li-deficient state (Li1-xFePO4) and phase separation within individual particles, where olive-shaped FePO4 nanodomains (5-10 nm) were embedded in the LiFePO4 matrix. The preservation of the olive-shaped skeleton during Li loss and phase change enabled materials recovery. By chemical compensation for the lithium loss, we successfully restored the hybrid LiFePO4/FePO4 structure to pure LiFePO4, eliminating nanograin boundaries. The regenerated LiFePO4 (R-LiFePO4) exhibited a high crystallinity similar to the fresh counterpart. This study highlights the importance of topotactic chemical reactions in structural repair and offers insights into the potential of targeted Li compensation for energy-efficient recycling of battery electrode materials with polyanion-type skeletons.

RESUMEN

The recovery of high-purity and high-value FePO4 raw materials from wastewater has great prospects in LiFePO4 battery industry due to the huge demand for new energy vehicle. However, the conventional in-situ FePO4 precipitation, as well as ex-situ PO43- adsorption-alkali regeneration, was incapable of efficiently obtaining high-purity products. To solve these problems, a dual-cycle regeneration method of Fe-NH2-polyacrylonitrile (PAN) adsorbent and H2SO4 desorbing solution was proposed to ex-situ FePO4 recovery from wastewater for Li-battery application. Benefitted from coordination interaction and electrostatic attraction, the maximum PO43- adsorption capacity of Fe-NH2-PAN reached 73.1 ± 0.4 mg/g. The average PO43- removal rate of continuous flow devices were 88.5% and 91.3% when treating low-P-concentration (0.22 mg/L) municipal wastewater (MW) and high-P-concentration (48.9 mg/L) slaughterhouse wastewater (SW) respectively. Furthermore, high-purity FePO4 analyzed by XRD spectra was achieved from the desorption solution at pH ∼1.6, resulting in the ultrahigh P recovery efficiencies of 91.4 ± 3.2%-96.3 ± 2.5% for SW and 82.7 ± 3.5% for MW. Besides, the LiFePO4/C electrodes made of recycled FePO4 exhibited a better discharge capacity (37.3 - 55.8 mAh/g) than that of commercial FePO4 agent (32.2 - 35.1 mAh/g) from 80 to 132 cycles, which showed the promising feasibility of recovering FePO4 from wastewater for Li-battery application.

Asunto(s)

RESUMEN

Phosphorus recovery from incinerated sewage sludge ash (ISSA) is important but hindered by low selectivity. Here, a novel strategy of acid leaching followed by thermally induced precipitation was proposed for the efficient and selective recovery of FePO4 from ISSA samples. A high phosphorus leaching efficiency of ∼ 99.6% was achieved with 0.2 mol/L H2SO4 and liquid to solid (L/S) ratio of 50 mL/g. Without removing various co-existing ions (Al3+, Ca2+, SO42-, etc.), high-purity FePO4 of ∼ 92.9% could be facilely produced from this highly acidic H2SO4 leachate (pH = 1.2) by simple addition of Fe(III) at a molar ratio of 1:1 to the phosphorus and reacted at 80 °C for thermally induced precipitation. The remained acid leachate could be further reused for five times to continue leaching phosphorus from the ISSA samples and produce the FePO4 precipitates with a high phosphorus recovery efficiency of 81.1 ± 1.8%. The selective recovery of FePO4 from the acid leachate was demonstrated more thermodynamically favorable compared to other precipitates at this acidic pH of 1.2, and elevated temperature of 80 °C towards thermally induced precipitation. The estimated cost of this strategy was ∼$26.9/kg-P and lower than that of other existing technologies. The recovered FePO4 precipitates could be used as a phosphate fertilizer to promote the growth of ryegrass, and also as a precursor to synthesize high-value LiFePO4 battery material, demonstrating the high-value application potential of the phosphorus from the ISSA.

Asunto(s)

RESUMEN

The lithium supply issue mainly lies in the inability of current mining methods to access lithium sources of dilute concentrations and complex chemistry. Electrochemical intercalation has emerged as a highly selective method for lithium extraction; however, limited source compositions have been studied, which is insufficient to predict its applicability to the wide range of unconventional water sources (UWS). This work addresses the feasibility and identifies the challenges of Li extraction by electrochemical intercalation from UWS, by answering three questions: 1) Is there enough Li in UWS? 2) How would the solution compositions affect the competition of Li+ to major ions (Na+/Mg2+/K+/Ca2+)? 3) Does the complex solution composition affect the electrode stability? Using one-dimensional olivine FePO4 as the model electrode, we show the complicated roles of major ions. Na+ acts as the competitor ion for host storage sites. The competition from Na+ grants Mg2+ and Ca2+ being only the spectator ions. However, Mg2+ and Ca2+ can significantly affect the charge transfer of Li+ and Na+, therefore affecting the Li selectivity. We point to improving the selectivity of Li+ to Na+ as the key challenge for broadening the minable UWS using the olivine host.

RESUMEN

The dramatic growth of the sodium-ion battery market evokes a high demand for high-performance cathodes. In this work, a nanosized amorphous FePO4@rGO composite is developed using coprecipitation combined with low-temperature hydrothermal synthesis, which registered a surface area of 179.43 m2 g-1. The composites maintain three-dimensional mesoporous morphology with a pore size in the range of 3-4 nm. Uniform distribution of amorphous FePO4 allows a reversible capacity of 175.4 mA h g-1 at 50 mA g-1 while maintaining a stable cycle life of 500 cycles at 200 mA g-1. The amorphous FePO4@rGO, obtained by energy-efficient synthesis, significantly improved the rate performance compared to the crystalline material prepared at high temperatures. Cyclic voltammetry tests reveal that the fast reaction kinetics can be attributed to the pseudocapacitive behavior of the electrode. In addition, we demonstrated the promise of FePO4@rGO cathodes for low-temperature sodium-ion batteries.

RESUMEN

Phosphorus excessively discharged into the water body is a primary cause of eutrophication, but phosphorus resource is limited and non-renewable. If phosphorus could be recovered from wastewaters, it can not only prevent phosphorus pollution but also achieve the recycling of phosphorus resources. This work proposed a novel strategy, Fe2+/H2O2-strengite method with the enhanced settlement, for phosphorus removal and recovery from pharmaceutical wastewater containing organic phosphorus (OP). In this scheme, OP could be converted into inorganic phosphorus (IP) in the Fe2+/H2O2 oxidation system, and then IP was recovered in the strengite system. This approach possessed the advantages of simple operation, high efficiency and valuable recovery products, besides, reducing the consumption of reagents, and hardly resulting in secondary pollution. Sixty cycles of phosphorus removal and recovery experiments were conducted, in which pH value was 4 and the initial molar ratio of Fe/P was 1.5. This process achieved a satisfactory and steady phosphorus removal performance, with soluble phosphate and total phosphorus removal efficiencies of 95.3% ± 1.7% and 91.4% ± 2.5%, respectively, and phosphorus was recovered. Possible mechanisms involved: the formation of amorphous strengite (FePO4·2H2O) analogue, the adsorption of hydrous ferric oxide (HFO) to phosphorus, and the flocculation of ferric salts. Besides, the presence of quartz as carriers could enhance the settling efficiency of products. Also, via various characterizations, products included amorphous strengite analogue and goethite mixed with phosphorus. This work provided an effective method to reduce OP pollution and recover phosphorus, and supplied thoughts for the treatment of refractory pollutants and the recycling of limited resources.

Asunto(s)

RESUMEN

We have successfully synthesized Na2 FePO4 F/biocarbon nanocomposite hollow microspheres from FeIII precursor as cathodes for sodium-ion batteries through self-assembly of yeast cell biotemplate and sol-gel technology. The carbon coating on the nanoparticle surface with a mesoporous structure enhances electron diffusion into Na2 FePO4 F crystal particles. The improved electrochemical performance of Na2 FePO4 F/biocarbon nanocomposites is attributed to the larger electrode-electrolyte contact area and more active sites for Na+ on the surface of hollow microspheres compared with those of Na2 FePO4 F/C. The Na2 FePO4 F/biocarbon nanocomposite exhibits a high initial discharge capacity of 114.3 mAh g-1 at 0.1 C, long-cycle stability with a capacity retention of 74.3 % after 500 cycles at 5 C, and excellent rate capability (70.2 mAh g-1 at 5 C) compared with Na2 FePO4 F/C. This novel nanocomposite hollow microsphere structure is suitable for improving the property of other cathode materials for high-power batteries.

Asunto(s)

RESUMEN

Waste activated sludge (WAS) has attracted considerable attention as an excellent material for P recovery from sewage. This study took concentrated phosphorus removal sludge as objective, and aimed at providing an effective route to promote the transformation of polyphosphate in sludge pellets to dissolved phosphate. After acid pH adjustment, total dissolved phosphate at pH 3.0 was 37.3-fold higher than that at natural pH. The P distribution results illustrated that acid pH accelerated the degradation of short chain polyphosphate into orthophosphate. Furthermore, cell staining results confirmed that the polyphosphate was sourced from the leakage of intracellular matters. Low field NMR and rheology properties analysis were adopted to illustrate that acid pH treatment further improved WAS dewatering performances. Accompanied with the reduction of heavy metals in WAS pellets, the acid pH treatment was also beneficial for WAS subsequent treatment or final disposal. Lastly, Fe3+ addition was proposed as favorable P recovery method, and spherical nanometric materials of FePO4 crystal was obtained accordingly.

Asunto(s)

RESUMEN

Phosphorous and iron are a macro- and micronutrient, respectively, whose low bioavailability can negatively affect crop productivity. There is ample evidence that the use of conventional P and Fe fertilizers has several environmental and economical disadvantages, but even though great expectations surround nanotechnology and its applications in the field of plant nutrition, little is known about the mechanisms underlying the uptake and use of these sub-micron particles (nanoparticles, NPs) by crop species. This work shows that cucumber and maize plants both use the nutrients borne by FePO4 NPs more efficiently than those supplied as bulk. However, morpho-physiological parameters and nutrient content analyses reveal that while cucumber plants (a Strategy I species with regard to Fe acquisition) mainly use these NPs as a source of P, maize (a Strategy II species) uses them preferentially for Fe. TEM analyses of cucumber root specimens revealed no cell internalization of the NPs. On the other hand, electron-dense nanometric structures were evident in proximity of the root epidermal cell walls of the NP-treated plants, which after ESEM/EDAX analyses can be reasonably identified as iron-oxyhydroxide. It appears that the nutritional interaction between roots and NPs is strongly influenced by species-specific metabolic responses.

RESUMEN

Amorphous iron phosphate (FePO4 ) has attracted enormous attention as a promising cathode material for sodium-ion batteries (SIBs) because of its high theoretical specific capacity and superior electrochemical reversibility. Nevertheless, the low rate performance and rapid capacity decline seriously hamper its implementation in SIBs. Herein, we demonstrate a sagacious multi-step templating approach to skillfully craft amorphous FePO4 yolk-shell nanospheres with mesoporous nanoyolks supported inside the robust porous outer nanoshells. Their unique architecture and large surface area enable these amorphous FePO4 yolk-shell nanospheres to manifest remarkable sodium storage properties with high reversible capacity, outstanding rate performance, and ultralong cycle life.

RESUMEN

Coating with FePO4 with the size of 20-30 nm on the surface of a LiNi0.8Co0.10Mn0.1O2 (NCM811) cathode produces an LFP3@NCM811 cathode via a sol-gel method, which markedly reduces secondary crystal cracking. A stable particle structure greatly improves the cycling stability of the LFP3@NCM811cathode, which retains 97% of its initial discharge capacity compared to NCM811 (78%) after 100 cycles at 2.7-4.5 V. Furthermore, it retains 86 and 63% of its initial discharge capacity after 400 cycles for LFP3@NCM811 and NCM811, respectively. The initial discharge capacity of the LFP3@NCM811 cathode is 218.8 mAh g-1 at 0.1 C, and the discharge capacity of the LFP3@NCM811 cathode is achieved to be 151.4 mAh g-1 at 5 C, which is 15 mAh g-1 higher than that of the NCM811 cathode. These are due to the reduction of cation mixing for a certain amount of Fe2+/Fe3+ or PO43- doped into the NCM811 surface, and the yolk-shell structure formed by coating with FePO4 helps improve the electronic conductivity and accelerate the Li+ transport. The cycling stability is mainly due to the secondary cleavage inhibition, which maintains the structural integrity of the cathode particles during the long cycle process and protects the inside of the particle from harmful electrolytes.