Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Más filtros











Intervalo de año de publicación
1.
São José dos Campos; s.n; 2023. 79 p. ilus, tab.
Tesis en Portugués | BBO - Odontología | ID: biblio-1437678

RESUMEN

A irradiação da dentina com o laser Nd:YAG mostra-se promissora para a qualidade da adesão, desde que aplicada sob parâmetros específicos e em etapas definidas. O objetivo deste estudo é avaliar de forma comparativa, o impacto da irradiação com laser de Nd:YAG sobre a formação e estabilidade da camada híbrida em dentina humana, pré-tratada com ácido e primer de sistema adesivo convencional, "in vitro". Setenta molares hígidos tiveram suas raízes e porções coronárias seccionadas horizontalmente, até completa exposição de dentina oclusal. As amostras foram divididas em: G1 (controle n=20); G2 (experimental n=20), sendo 10 dentes de cada grupo destinados ao microcisalhamento (MC) e 10 dentes à microscopia eletrônica de varredura (MEV). Nos 30 dentes restantes analisou-se: textura por Tomografia Computadorizada de Feixe Cônico (AT=15); e Espectroscopia de Infravermelho por Transformada de Fourier (FTIR=15) em 3 momentos: dentina controle; após tratamento com ácido + primer; e posterior à irradiação a laser. Estatisticamente, optou-se por ANOVA 1 fator, Qui Quadrado de Pearson, teste T e múltiplas comparações de Tukey com significância de 5%. A FTIR evidenciou redução dos níveis de fosfato e carbonato nos momentos primer e após irradiação laser, porém não havendo desnaturação do colágeno exposto. A análise de textura evidenciou uma tendência à formação de um tecido mais padronizado após o uso do laser. O teste de MC evidenciou valores médios de 36,5 e 35,2MPa para G1 e G2 respectivamente (p>0,05) e portanto, de forma imediata, o laser não mostrou efeitos deletérios ao processo adesivo. Além disso, observou-se maior penetrabilidade do adesivo na avaliação em MEV após a aplicação do laser. Novas pesquisas com avaliação longitudinal mostram-se necessárias para verificar se o efeito do laser pode ter sido protetor da degradação hidrolítica, visto que há uma redução do conteúdo de água local durante a formação da camada híbrida (AU).


Irradiation of dentin with the Nd:YAG laser shows promise for the quality of adhesion, as long as it is applied under specific parameters and in defined steps. The objective of this study is to comparatively evaluate the impact of irradiation with Nd:YAG laser on the formation and stability of the hybrid layer in human dentin, pretreated with acid and primer of conventional adhesive system, "in vitro". Seventy healthy molars had their roots and coronal portions horizontally sectioned, until complete exposure of occlusal dentin. The samples were divided into: G1 (control n=20); G2 (experimental n=20), with 10 teeth from each group destined for microshearing (MC) and 10 teeth for scanning electron microscopy (SEM). In the 30 remaining teeth analyzed: texture by Cone Beam Computed Tomography (AT=15); and Fourier Transform Infrared Spectroscopy (FTIR=15) in 3 moments: dentin control; after treatment with acid + primer; and after laser irradiation. Statistically, we opted for 1-way ANOVA, Pearson's Chi Square, T test and Tukey's multiple comparisons with a significance of 5%. FTIR showed a reduction in phosphate and carbonate levels in the primer moments and after laser irradiation, but there was no denaturation of the exposed collagen. The texture analysis evidenced a trend towards the formation of a more expressive tissue after the use of the laser. The CM test showed mean values of 36.5 and 35.2MPa for G1 and G2 respectively (p>0.05) and therefore, immediately, the laser showed no deleterious effects on the adhesive process. In addition, greater penetrability of the adhesive was observed in the SEM evaluation after laser application. New studies with longitudinal evaluation are necessary to verify if the laser effect could have been protected from hydrolytic degradation, since there is a reduction in the local water content during the formation of the hybrid layer (AU).


Asunto(s)
Recubrimientos Dentinarios , Espectroscopía Infrarroja por Transformada de Fourier , Resistencia al Corte , Tomografía Computarizada de Haz Cónico , Láseres de Estado Sólido
2.
Rev. mex. ing. bioméd ; 38(1): 225-234, ene.-abr. 2017. graf
Artículo en Español | LILACS | ID: biblio-902340

RESUMEN

Resumen: Dos de los grandes retos en la biología de las Células Madre (CM) y la Medicina Regenerativa, son el control en la diferenciación de estas células y asegurar la pureza de las células diferenciadas, por lo que es necesario contar con técnicas rápidas, eficientes y precisas para la caracterización de CM y su diferenciación a diferentes linajes celulares. El objetivo de este trabajo fue analizar Células Madre Pluripotentes (CMP) y Células Pancreáticas Diferenciadas (CPD) mediante espectroscopía Infrarroja por Transformada de Fourier (FTIR) y Análisis de Componentes Principales (ACP). Para ello se diferenciaron CMP a CPD, caracterizando el proceso de diferenciación a los días 0, 11, 17 y 21 mediante microscopía óptica y espectroscopia vibracional. Los espectros FTIR se analizaron con el método multivariado de ACP, utilizando su segunda derivada en las regiones de proteínas, carbohidratos y ribosas. Los resultados indican que el ACP permite caracterizar y discriminar CMP y CPD en sus diferentes etapas de diferenciación en las regiones espectrales analizadas. Con lo anterior concluimos que el ACP permite caracterizar química y estructuralmente CMP y diferentes etapas de su diferenciación en una forma rápida, precisa y no invasiva.


Abstract: Two of the greatest challenges in Stem Cells (SCs) biology and regenerative medicine, are differentiation control of SCs and ensuring the purity of differentiated cells. In this sense, fast, efficient and accurate techniques for SCs characterization and their differentiation into different cell lineages are needed. The aim of this study was to analyse Pluripotent Stem Cells (PSCs) and Differentiated Pancreatic Cells (DPCs) by Fourier Transform Infrared (FTIR) spectroscopy and Principal Component Analysis (PCA). For this purpose, we differentiated PSCs toward DPCs, characterizing the differentiation process at different stages (0, 11, 17 and 21 days) through light microscopy and vibrational spectroscopy. FTIR spectra were analysed with the multivariate method of PCA, using the second derivatives in the protein, carbohydrate and ribose regions. The results indicate that the PCA allows to characterize and discriminate PSCs and DPCs at different stages of differentiation in the analysed spectral regions. From these results, we concluded that the PCA allows the chemically and structural characterization of PSCs and the different stages of their differentiation in a fast, accurate and non-invasive way.

3.
São José dos Campos; s.n; 2013. 84 p. ilus, tab, graf.
Tesis en Portugués | BBO - Odontología | ID: biblio-867564

RESUMEN

As técnicas de biópsia óptica consistem na análise de tecidos através das suas propriedades físicas. Dentre essas técnicas, destaca-se a espectroscopia Fourier Transform Infrared (FT-IR), a qual tem sido utilizada para identificar padrões de alterações moleculares por meio dos modos vibracionais. O objetivo do presente estudo foi avaliar através da espectroscopia FT-IR amostras de saliva de 14 pacientes do com ardência bucal visando estudar alterações bioquímicas globais e comparar à saliva de 14 pacientes controle, pareados por idade e sexo. Para obtenção dos resultados, os espectros adquiridos e armazenados pelo software de controle do espectrômetro Fourier Transform Infrared foram convertidos para o formato ASCII, e posteriormente foi realizado processamento e análise no Minitab 16. Os resultados revelaram por meio da análise dos gráficos realizados pelos programas Origin e Qytplot que houveram diferenças nas intensidades das bandas relacionadas a proteínas e lipídios, que apresentaram-se com menor intensidade espectral para a saliva dos pacientes com ardência. Portanto, foi possível concluir que a técnica se mostrou eficaz para caracterizar a presença de alterações na saliva dos pacientes com ardência comparados a saliva dos pacientes normais


The optical biopsy techniques consist in the analysis of tissues through its physical properties. Among these techniques, there is a Fourier Transform Infrared (FT-IR) spectroscopy, which has been used to identify patterns of molecular changes through vibrational modes. The aim of this study was to evaluate by FT-IR spectroscopy saliva samples from 14 patients complaining of burning mouth aiming to study global biochemical changes and compare the saliva of 14 patients without any complaint, matched for age and sex. To obtain results, the spectra acquired and stored by the control software of the spectrometer Fourier Transform Infrared (FT-IR) were converted to ASCII format for further processing and analysis be conducted in Minitab 16. The results revealed by the analysis performed by the graphics program Origin and Qytplot that there were differences in the intensities of the bands related to proteins and lipids, who presented with lower spectral intensity to the saliva of patients with burning complain. Therefore, it was concluded that the technique was effective for characterizing the presence of changes in the saliva of patients with burning compared saliva from normal patients


Asunto(s)
Biopsia , Diagnóstico Bucal , Saliva
4.
Acta cient. venez ; 57(3): 87-92, 2006. tab, graf
Artículo en Español | LILACS | ID: lil-537142

RESUMEN

La adsorción de plomo por un vermicompost comercial fue estudiada a 284, 306 y 323 K aplicando los modelos de Langmuir y Freundlich, los cuales describen adecuadamente el proceso de adsorción. Las capacidades de adsorción máximas de 116,3; 113,6 y 123,5 mg.g-¹. De acuerdo a las funciones termodinámicas, la retención de plomo involucra una reacción endotérmica (ΔHadsorción = 4,25 ± 0,92 kCal.mol-¹) con un aumento de la entropía del sistema (ΔS = 7,55 a 8,62 kCal.K-1mol-¹) asociado a la ionización de los grupos carboxílicos. La baja espontaneidad de la reacción fue determinada por los valores positivos de la Energía Libre de Gibbs (ΔG = 2,11 a 1,49 kCal.mol-¹). Las diferencias observadas en los espectros FTIR del compost en la región de 1800 a 1300 cm-¹ a diferentes condiciones de pH fueron interpretadas como el resultado de la ionización de los grupos carboxílicos, reduciendo la intensidad de las bandas alrededor de 1725 cm-¹, generándose las señales a 1550 cm-¹ y 1390 cm-¹ de los grupos carboxilato. Los mismos cambios fueron observados a pH 3,8 en presencia del ión Pb²+, lo que sugiere que el acomplejamiento con el metal pesado se produce por medio de una reacción de intercambio catiónico.


The adsorption of Pb2+ by a comercial vermicompost was studied at 284, 306 and 323 K using Langmuir and Freunldich isotherms. The maximum adsorption capacities were 116.3; 113.6 and 123.5 mg.g-¹. Thermodinamic functions showed that the retention takes place by an endothermic reaction (ΔHadsorción = 4,25 ± 0,92 KCal.mol-¹) in which entropy increases (ΔS = 7,55 to 8,62 kCal.K-1mol-¹) along with the acidity of the solutions due to the ionization of carboxylic groups. The low spontaneity was reflected by positive values of the Gibbs free energy (ΔG = 2,11 a 1,49 kCal.mol-¹). The differences in FTIR spectra of vermicompost at pH 3.8 and 7.0 in the region between 1800 to 1300 cm-¹ were interpreted on the basis of caboxylic acids ionization thet reduced the band intensity around 1725 cm-¹, producing signals at 1550 and 1390 cm-1of the carboxylate groups. Similar changes were detected at pH 3.8 when ionic lead was present which suggested that heavy metal complexation by a cationic exchange reaction.


Asunto(s)
Análisis Espectral/métodos , Isoterma , Plomo/análisis , Química
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA