RESUMEN
In this study, the effect of halide anions on the selectivity of the CO2 reduction reaction to CO was investigated in choline-based ethylene glycol solutions containing different halides (ChCl : EG, ChBr : EG, ChI : EG). The CO2RR was studied using silver (Ag) and gold (Au) electrodes in a compact H-cell. Our findings reveal that chloride effectively suppresses the hydrogen evolution reaction and enhances the selectivity of carbon monoxide production on both Ag and Au electrodes, with relatively high selectivity values of 84 % and 62 %, respectively. Additionally, the effect of varying ethylene glycol content in the choline chloride-containing electrolyte (ChCl : EG 1 : X, X=2, 3, 4) was investigated to improve the current density during CO2RR on the Ag electrode. We observed that a mole ratio of 1 : 4 exhibited the highest current density with a comparable faradaic efficiency toward CO. Notably, an evident surface reconstruction process took place on the Ag surface in the presence of Cl- ions, whereas on Au, this phenomenon was less pronounced. Overall, this study provides new insights into anion-induced surface restructuring of Ag and Au electrodes during CO2RR, and its consequences on the reduction performance on such surfaces in non-aqueous electrolytes.
RESUMEN
The electrochemical CO2 reduction reaction (ECR) is a promising pathway to producing valuable chemicals and fuels. Despite extensive studies reported, improving CO2 adsorption for local CO2 enrichment or water dissociation to generate sufficient H* is still not enough to achieve industrial-relevant current densities. Herein, we report a "two-in-one" catalyst, defective Bi nanosheets modified by CrOx (Bi-CrOx), to simultaneously promote CO2 adsorption and water dissociation, thereby enhancing the activity and selectivity of ECR to formate. The Bi-CrOx exhibits an excellent Faradic efficiency (≈ 100 %) in a wide potential range from â0.4 to â0.9 V. In addition, it achieves a remarkable formate partial current density of 687 mA cmâ2 at a moderate potential of â0.9 V without iR compensation, the highest value at â0.9 V reported so far. Control experiments and theoretical simulations revealed that the defective Bi facilitates CO2 adsorption/activation while the CrOx accounts for enhancing the protonation process via accelerating H2O dissociation. This work presents a pathway to boosting formate production through tuning CO2 and H2O species at the same time.
RESUMEN
Constructing local microenvironments is one of the important strategies to improve the electrocatalytic performances, such as in electrochemical CO2 reduction (ECR). However, effectively customizing these microenvironments remains a significant challenge. Herein, utilizing carbon nanotube (CNT) heterostructured semi-open Co-N2O2 catalytic configurations (Co-salophen), we have demonstrated the role of the local microenvironment on promoting ECR through regulating the location of hydroxyl groups. Concretely, compared with the maximum Faradaic efficiency (FE) of 62% for carbon monoxide (CO) presented by Co-salophen/CNT without a hydroxyl microenvironment, the designed Co-salophen-OH3/CNT, featuring hydroxyl groups at the Co-N2O2 structural opening, shows remarkable CO2-to-CO electroreduction activity across a wide potential window, with the FE of CO up to 95%. In particular, through the deuterium kinetic isotope experiments and theoretical calculations, we decoded that the hydroxyl groups act as a proton relay station, promoting the efficient transfer of protons to the Co-N2O2 active sites. The finding demonstrates a promising molecular design strategy for enhancing electrocatalysis.
RESUMEN
Electrochemical CO2 reduction (ECO2R) to value-added chemicals offers a promising approach to both mitigate CO2 emission and facilitate renewable energy conversion. We demonstrate a solar energy powered ECO2R system operating at a relatively large current density (57 mA cm-2) using In2O3 nanosheets (NSs) as the cathode and a commercial perovskite solar cell as the electricity generator, which achieves the high solar to formate energy conversion efficiency of 6.6 %. The significantly enhanced operative current density with a fair solar energy conversion efficiency on In2O3 NSs can be ascribed to their high activity and selectivity for formate production, as well as the fast kinetics for ECO2R. The Faradic efficiencies (FEs) of formate In2O3 NSs are all above 93 %, with the partial current density of formate ranging from 2.3 to 342 mA cm-2 in a gas diffusion flow cell, which is among the widest for formate production on In-based catalysts. In-situ Raman spectroscopy and density functional theory simulations reveal that the exceptional performances of formate production on In2O3 NSs originates from the presence of abundant low coordinated edge sites, which effectively promote the selective adsorption of *OCHO while inhibiting *H adsorption.
RESUMEN
Electrochemical CO2 reduction in non-aqueous solvents is promising due to the increased CO2 solubility of organic-based electrolytes compared to aqueous electrolytes. Here the effect of nine different salts in propylene carbonate (PC) on the CO2 reduction product distribution of polycrystalline Cu is investigated. Three different cations (tetraethylammonium (TEA), tetrabutylammonium (TBA), and tetrahexylammonium (THA)) and three different anions (chloride (Cl), tetrafluoroborate (BF4), and hexafluorophosphate (PF6)) were used. Chronoamperometry and in-situ FTIR measurements show that the size of the cation has a crucial role in the selectivity. A more hydrophobic surface is obtained when employing a larger cation with a weaker hydration shell. This stabilizes the CO2-· radical and promotes the formation of ethylene. CO2 reduction in 0.7 M THACl/PC shows the highest hydrocarbon formation. Lastly, we hypothesize that the hydrocarbon formation pathway is not through C-C coupling, as the CO solubility in PC is very high, but through the dimerization of the COH intermediate.
RESUMEN
The electrochemical CO2 reduction reaction (CO2RR) to produce methanol (CH3OH) is an attractive yet challenging approach due to a lack of selective electrocatalysts. An immobilized cobalt phthalocyanine (CoPc) molecular catalyst has emerged as a promising electrocatalyst for CH3OH synthesis, demonstrating decent activity and selectivity through a CO2-CO-CH3OH cascade reaction. However, CoPc's performance is limited by its weak binding strength toward the CO intermediate. Recent advancements in molecular modification aimed at enhancing CO intermediate binding have shown great promise in improving CO2-to-CH3OH performance. In this Perspective, we discuss the competitive binding mechanism between CO2 and CO that hinders CH3OH formation and summarize effective molecular modification strategies that can enhance both the binding of the CO intermediate and the conversion of the CO2-to-CH3OH activity. Finally, we offer future perspectives on optimization strategies to inspire further research efforts to fully unlock the potential for methanol synthesis via the CO2RR using molecular catalysts.
RESUMEN
Electrochemical CO2 reduction reaction (CO2RR) to produce value-added multi-carbon chemicals has been an appealing approach to achieving environmentally friendly carbon neutrality in recent years. Despite extensive research focusing on the use of CO2 to produce high-value chemicals like high-energy-density hydrocarbons, there have been few reports on the production of propane (C3H8), which requires carbon chain elongation and protonation. A rationally designed 0D/2D hybrid Cu2O anchored-Ti3C2Tx MXene catalyst (Cu2O/MXene) is demonstrated with efficient CO2RR activity in an aqueous electrolyte to produce C3H8. As a result, a significantly high Faradaic efficiency (FE) of 3.3% is achieved for the synthesis of C3H8 via the CO2RR with Cu2O/MXene, which is ≈26 times higher than that of Cu/MXene prepared by the same hydrothermal process without NH4OH solution. Based on in-situ attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and density functional theory (DFT) calculations, it is proposed that the significant electrocatalytic conversion originated from the synergistic behavior of the Cu2O nanoparticles, which bound the *C2 intermediates, and the MXene that bound the *CO coupling to the C3 intermediate. The results disclose that the rationally designed MXene-based hybrid catalyst facilitates multi-carbon coupling as well as protonation, thereby manipulating the CO2RR pathway.
RESUMEN
Transition metal-nitrogen-carbon (M-N-C) catalysts have emerged as promising candidates for electrocatalytic CO2 reduction reaction (CO2RR) due to their uniform active sites and high atomic utilization rate. However, poor efficiency at low overpotentials and unclear reaction mechanisms limit the application of M-N-C catalysts. In this study, Fe-N-C catalysts are developed by incorporating S atoms onto ordered hierarchical porous carbon substrates with a molecular iron thiophenoporphyrin. The well-prepared FeSNC catalyst exhibits superior CO2RR activity and stability, attributes to an optimized electronic environment, and enhances the adsorption of reaction intermediates. It displays the highest CO selectivity of 94.0% at -0.58 V (versus the reversible hydrogen electrode (RHE)) and achieves the highest partial current density of 13.64 mA cm-2 at -0.88 V. Furthermore, when employed as the cathode in a Zn-CO2 battery, FeSNC achieves a high-power density of 1.19 mW cm-2 and stable charge-discharge cycles. Density functional theory calculations demonstrate that the incorporation of S atoms into the hierarchical porous carbon substrate led to the iron center becoming more electron-rich, consequently improving the adsorption of the crucial reaction intermediate *COOH. This study underscores the significance of hierarchical porous structures and heteroatom doping for advancing electrocatalytic CO2RR and energy storage technologies.
RESUMEN
Efficient electrochemical CO2 reduction reaction (CO2RR) requires advanced gas-diffusion electrodes (GDEs) with tunned microenvironment to overcome low CO2 availability in the vicinity of catalyst layer. Herein, for the first time, pyridine-containing microgels-augmented CO2 availability is presented in Cu2O-based GDE for high-rate CO2 reduction to ethylene, owing to the presence of CO2-phil microgels with amine moieties. Microgels as three-dimensional polymer networks act as CO2 micro-reservoirs to engineer the GDE microenvironment and boost local CO2 availability. The superior ethylene production performance of the GDE modified by 4-vinyl pyridine microgels, as compared with the GDE with diethylaminoethyl methacrylate microgels, indicates the bifunctional effect of pyridine-based microgels to enhance CO2 availability, and electrocatalytic CO2 reduction. While the Faradaic efficiency (FE) of ethylene without microgels was capped at 43% at 300 mA cm-2, GDE with the pyridine microgels showed 56% FE of ethylene at 700 mA cm-2. A similar trend was observed in zero-gap design, and GDEs showed 58% FE of ethylene at -4.0 cell voltage (>350 mA cm-2 current density), resulting in over 2-fold improvement in ethylene production. This study showcases the use of CO2-phil microgels for a higher rate of CO2RR-to-C2+, opening an avenue for several other microgels for more selective and efficient CO2 electrolysis.
RESUMEN
Electrochemical CO2 reduction reaction (CO2RR) is one of the most attractive measures to achieve the carbon neutral goal by converting CO2 into high-value chemicals such as formate. Si in Bi silicates is promising to enhance CO2 adsorption and activation due to its strong oxygenophilicity. Whereas, its role in boosting CO2RR via the cheap Bi-based catalysts is still not clear. Herein, we design CNT@Bi silicates catalyst, demonstrating the highest FEHCOOH of 96.3 % at -0.9 V vs. reversible hydrogen electrode with good stability. Through X-ray photoelectron spectroscopy (XPS), in-situ Attenuated Total Reflectance-Fourier Transform Infrared (In-situ ATR-SEIRAS) experiments, and Density Functional Theory (DFT) calculations, the role of Si in Bi silicates was unveiled: tuning the electronic structure of Bi, weakening the Bi-O bond, and strengthening electron transfer from Bi to CO2, thereby promoting the generation of CO2*- and *OCHO intermediates. Additionally, carbon nanotubes (CNTs) promote not only the conductivity but also the generation of abundant oxygen vacancies in CNT@Bi silicates evidenced by the electron transfer from CNT to Bi silicates from XPS results. Further, the CNT@Bi silicates endows it with the highest electrochemical activation area. These findings suggest the effectiveness of Si in Bi silicates and structure tuning to design highly selective CO2RR catalyst for HCOOH production.
RESUMEN
Regulating competitive reaction pathways to direct the selectivity of electrochemical CO2 reduction reaction toward a desired product is crucial but remains challenging. Herein, switching product from HCOOH to CO is achieved by incorporating Sb element into the CuS, in which the Cu-S ionic bond is coupled with S-Sb covalent bond through bridging S atoms that elongates the Cu-S bond from 2.24â Å to 2.30â Å. Consequently, CuS with a shorter Cu-S bond exhibited a high selectivity for producing HCOOH, with a maximum Faradaic efficiency (FE) of 72 %. Conversely, Cu3SbS4 characterized by an elongated Cu-S bond exhibited the most pronounced production of CO with a maximum FE of 60 %. In situ spectroscopy combined with density functional theory calculations revealed that the altered Cu-S bond length and local coordination environment make the *HCOO binding energy weaker on Cu3SbS4 compared to that on CuS. Notably, a volcano-shaped correlation between the Cu-S bond length and adsorption strength of *COOH indicates that Cu-S in Cu3SbS4 as double-active sites facilitates the adsorption of *COOH, and thus results in the high selectivity of Cu3SbS4 toward CO.
RESUMEN
Electrochemical CO2 reduction reaction (eCO2RR) to value-added multicarbon (C2+) products offers a promising approach for achieving carbon neutrality and storing intermittent renewable energy. Copper (Cu)-based electrocatalysts generally play the predominant role in this process. Yet recently, more and more non-Cu materials have demonstrated the capability to convert CO2 into C2+, which provides impressive production efficiency even exceeding those on Cu, and a wider variety of C2+ compounds not achievable with Cu counterparts. This motivates us to organize the present review to make a timely and tutorial summary of recent progresses on developing non-Cu based catalysts for CO2-to-C2+. We begin by elucidating the reaction pathways for C2+ formation, with an emphasis on the unique C-C coupling mechanisms in non-Cu electrocatalysts. Subsequently, we summarize the typical C2+-involved non-Cu catalysts, including ds-, d- and p-block metals, as well as metal-free materials, presenting the state-of-the-art design strategies to enhance C2+ efficiency. The system upgrading to promote C2+ productivity on non-Cu electrodes covering microbial electrosynthesis, electrolyte engineering, regulation of operational conditions, and synergistic co-electrolysis, is highlighted as well. Our review concludes with an exploration of the challenges and future opportunities in this rapidly evolving field.
RESUMEN
Nickel anchored N-doped carbon electrocatalysts (Ni-N-C) are rapidly developed for the electrochemical reduction reaction of carbon dioxide (CO2RR). However, the high-performanced Ni-N-C analogues design for CO2RR remains bewilderment, for the reason lacking of definite guidance for its structure-activity relationship. Herein, the correlation between the proportion of nitrogen species derived from various nitrogen sources and the CO2RR activity of Ni-N-C is investigated. The x-ray photoelectron spectroscopy (XPS) spectrum combined with the CO2RR performance results show that pyridinic-N content has a positive correlation with CO2RR activity. Moreover, density functional theory (DFT) demonstrates that pyridinic-N coordinated Ni-N4sites offers optimized free energy and favorable selectivity towards CO2RR compared with pyrrolic-N. Accordingly, Ni-Na-C with highest pyridinic-N content (ammonia as nitrogen source) performs superior CO2RR activity, with the maximum carbon monoxide faradaic efficiency (FECO) of 99.8% at -0.88 V vs. RHE and the FECOsurpassing 95% within potential ranging of -0.88 to -1.38 V vs. RHE. The building of this parameter for CO2RR activity of Ni-N-C give instructive forecast for low-cost and highly active CO2RR electrocatalysts.
RESUMEN
A carbon paper-based gas diffusion electrode (GDE) is used with a bismuth(III) subcarbonate active catalyst phase for the electrochemical reduction of CO2 in a gas/electrolyte flow-by configuration electrolyser at high current density. It is demonstrated that in this configuration, the gas and catholyte phases recombine to form K2CO3/KHCO3 precipitates to an extent that after electrolyses, vast amount of K+ ions is found by EDX mapping in the entire GDE structure. The fact that the entirety of the GDE gets wetted during electrolysis should, however, not be interpreted as a sign of flooding of the catalyst layer, since electrolyte perspiring through the GDE can largely be removed with the outflow gas, and the efficiency of electrolysis (toward the selective production of formate) can thus be maintained high for several hours. For a full spatial scale quantitative monitoring of electrolyte penetration into the GDE, (relying on K+ ions as tracer) the method of inductively coupled plasma-mass spectrometry (ICP-MS) assisted energy dispersive X-ray (EDX) tomography is introduced. This new, cheap and robust tomography of non-uniform aspect ratio has a large planar span that comprises the entire GDE surface area and a submicrometer depth resolution, hence it can provide quantitative information about the amount and distribution of K+ remnants inside the GDE structure, in three dimensions.
RESUMEN
Electrochemical CO2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO2 into the desired multi-carbon (C2+) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO2 electrolysis toward C2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C2+ products. A physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C2+/C1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C2+/C1 product ratio using different electrolyzer environments including selected tests in a 100-cm2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO2 electrolysis.
RESUMEN
Electrochemical CO2 reduction has garnered significant interest in the conversion of sustainable energy to valuable fuels and chemicals. Cu-based bimetallic catalysts play a crucial role in enhancing *CO concentration on Cu sites for efficient CâC coupling reactions, particularly for C2 product generation. To enhance Cu's electronic structure and direct its selectivity toward C2 products, a novel strategy is proposed involving the in situ electropolymerization of a nano-thickness cobalt porphyrin polymeric network (EP-CoP) onto a copper electrode, resulting in the creation of a highly effective EP-CoP/Cu tandem catalyst. The even distribution of EP-CoP facilitates the initial reduction of CO2 to *CO intermediates, which then transition to Cu sites for efficient CâC coupling. DFT calculations confirm that the *CO enrichment from Co sites boosts *CO coverage on Cu sites, promoting CâC coupling for C2+ product formation. The EP-CoP/Cu gas diffusion electrode achieves an impressive current density of 726 mA cm-2 at -0.9 V versus reversible hydrogen electrode (RHE), with a 76.8% Faraday efficiency for total C2+ conversion and 43% for ethylene, demonstrating exceptional long-term stability in flow cells. These findings mark a significant step forward in developing a tandem catalyst system for the effective electrochemical production of ethylene.
RESUMEN
At present, electrochemical CO2 reduction has been developed towards industrial current density, but the high faradaic efficiency at wide potential range or large current density is still an arduous task. Therefore, in this work, the highly exposed Ni single atoms (NiNCR-0.72) was synthesized through simple metal organic frameworks (MOFs)-derived method with SiO2 protection strategy. The obtained catalyst keeps CO faradaic efficiency (FECO) above 91 % under the wide potential range, and achieves a high FECO of 96.0 % and large CO partial current density of -206.8 mA cm-2 at -0.7 V in flow cell. The experimental results and theoretical calculation disclose that NiNCR-0.72 possesses the robust structure with rich mesopore and more highly exposed Ni-N active sites under SiO2 protection, which could facilitate CO2 transportation, lower energy barrier of CO2 reduction, and raise difficulty of hydrogen evolution reaction. The protection strategy is instructive to the synthesis of other MOFs-derived metal single atoms.
RESUMEN
Highly selective production of value-added multicarbon (C2+) products via electrochemical CO2 reduction reaction (eCO2RR) on polycrystalline copper (Cu) remains challenging. Herein, the facile surface modification using poly (α-ethyl cyanoacrylate) (PECA) is presented to greatly enhance the C2+ selectivity for eCO2RR over polycrystalline Cu, with Faradaic efficiency (FE) towards C2+ products increased from 30.1% for the Cu electrode to 72.6% for the obtained Cu-PECA electrode at -1.1 V vs. reversible hydrogen electrode (RHE). Given the well-determined FEs towards C2+ products, the partial current densities for C2+ production could be estimated to be -145.4 mA cm-2 for the Cu-PECA electrode at -0.9 V vs. RHE in a homemade flow cell. In-situ spectral characterizations and theoretical calculations reveal that PECA featured with electron-accepting -C≡N and -COOR groups decorated onto the Cu electrode could inhibit the adsorption of *H intermediates and stabilize the *CO intermediates, given the redistributed interfacial electron density and the raised energy level of d-band center (Ed) of Cu active sites, thus facilitating the C-C coupling and then the C2+ selective production. This study is believed to be guidable to the modification of electrocatalysts and electrodes with polymers to steer the surface adsorption behaviors of reaction intermediates to realize practical eCO2RR towards value-added C2+ products with high activity and selectivity.
RESUMEN
Electrocatalytic reduction of CO2 powered by renewable electricity provides an elegant route for converting CO2 into valuable chemicals and feedstocks, but normally suffers from a high overpotential and low selectivity. Herein, Ag and Sn heteroatoms were simultaneously introduced into nanoporous Cu (np-Ag/Sn-Cu) mainly in the form of an asymmetric local electric field for CO2 electroreduction to CO in an aqueous solution. The designed np-Ag/Sn-Cu catalyst realizes a recorded 90 % energy efficiency and a 100 % CO Faradaic efficiency over ultrawide potential window (ΔE=1.4â V), outperforming state-of-the-art Au and Ag-based catalysts. Density functional theory calculations combined with in situ spectroscopy studies reveal that Ag and Sn heteroatoms incorporated into Cu matrix could generate strong and asymmetric local electric field, which promotes the activation of CO2 molecules, enhances the stabilization of the *COOH intermediate, and suppresses the hydrogen evolution reaction, thus favoring the production of CO during CO2RR.
RESUMEN
Integrated reference electrodes allow to deconvolute voltage contributions of anode and cathode and contribute to a better understanding of CO2 electrolyzers. However, in zero-gap cell configurations, this integration can be challenging and obtaining error-free data with such a setup is a non-trivial task. This study compares five different methods to integrate a reference electrode into an alkaline zero-gap CO2 electrolysis cell. Sources of error and measures to circumvent them are investigated and finite-element simulation is used to gain a better understanding of observed effects. Placing a reference electrode into the inactive area of the cell is found to be a reliable method, as long as the placement of electrodes is sufficiently controlled. Sandwiching a wire quasi-reference electrode between two membranes is especially useful for electrochemical impedance spectroscopy; however, it can affect the overall cell performance. Contacting the catalyst layer from the backside with a salt-bridge is promising for localized measurements if sufficient reproducibility can be ensured.