RESUMEN

Antimicrobial resistance (AMR) is a significant threat that demands surveillance to identify and analyze trends of the emerging antibiotic resistance genes (ARGs) and potential microbial carriers. The influent of the wastewater treatment plants (WWTPs) reflects the microbes derived from the population and effluent being the source of dissemination of potential pathogenic microbes and AMR. The present study aimed to monitor microbial communities and antibiotic resistance genes in WWTPs employing a whole metagenome shotgun sequencing approach. The samples were collected from a sewage treatment plant (STP) and a common effluent treatment plant (CETP) in Delhi, India. The results showed the influent of STP to be rich in Bifidobacterium, Bacteroides, Escherichia, Arcobacter, and Pseudomonas residents of gut microbiota and known to cause diseases in humans and animals; whereas the CETP sample was abundant in Aeromonas, Escherichia, and Shewanella known to be involved in the degradation of different compounds. Interestingly, the effluent samples from both STPs and CETP were rich in microbial diversity, comprising organic and xenobiotic compound degrading and disease-causing bacteria, indicating the effluent being the source of dissemination of concerning bacteria to the environment. The functional profile at both sites displayed similarity with an abundance of housekeeping function genes as analyzed by Clusters of Orthologous Genes (COG), KEGG Orthology (KO), and subsystem databases. Resistome profiling by MEGARes showed the dominance of ARGs corresponding to beta-lactams having relative abundance ranging from 16% to 34% in all the metagenome datasets, followed by tetracycline (8%-16%), aminoglycosides (7%-9%), multi-drug (5%-9%), and rifampin (3%-9%). Also, AMR genes oxa, ant3-DPRIME, and rpoB, which are of clinical importance were predominantly and most prevalently present in all the samples. The presence of AMR in effluents from both types of treatment plants indicates that wastewater from both sources contributes to the spread of pathogenic bacteria and resistance genes, increasing the environmental AMR burden and therefore requires tertiary treatment before discharge. This work will facilitate further research towards the identification of suitable biomarkers for monitoring antibiotic resistance.

Asunto(s)

RESUMEN

Urban wastewater is a significant by-product of human activities. Conventional urban wastewater treatment plants have limitations in their treatment, mainly concerning the low removal efficiency of conventional and emerging contaminants. Discharged wastewater also contains harmful microorganisms, posing risks to public health, especially by spreading antibiotic-resistant bacteria and genes. Therefore, this study assesses the potential of a native microalgae-bacteria system (MBS) for urban wastewater bioremediation and disinfection, targeting NH4+-N and PO43--P removal, coliform reduction, and antibiotic resistance gene mitigation. The MBS showed promising results, including a high specific growth rate (0.651 ± 0.155 d-1) and a significant average removal rate of NH4+-N and PO43--P (9.05 ± 1.24 mg L-1 d-1 and 0.79 ± 0.06 mg L-1 d-1, respectively). Microalgae-induced pH increase rapidly reduces coliforms (r > 0.9), including Escherichia coli, within 3 to 6 days. Notably, the prevalence of intI1 and the antibiotic resistance genes sul1 and blaTEM are significantly diminished, presenting the MBS as a sustainable approach for tertiary wastewater treatment to combat eutrophication and reduce waterborne disease risks and antibiotic resistance spread.

RESUMEN

This review approach is divided into two scopes to focus the pollution threats. We cover the applications of nanomaterials to curtail the pollution induced by fossil fuel combustion, and textile dye effluents. Toxic emissions released from automobile exhaust that comprise of NOX. SOX and PAHs compile to harsh breathing and respiratory troubles. The effluents generated from the mammoth textile and leather industry is potential threat to beget massive health issues to human life, and environmental problem. Part I projects the broad envisage on role of nano materials in production of alternative biofuels. In addition, green sources for synthesizing nanomaterials are given special importance. Nano catalyst's utilization in bio-derived fuels such as biogas, bio-oil, bioethanol, and biodiesel are catered to this article. Part II cover the current statistics of textile effluent pollution level in India and its steps in confronting the risks of pollution are discussed. A clear picture of the nano techniques in pre-treatment, and the recent nano related trends pursued in industries to eliminate the dyes and chemicals from the discharges is discussed. The substantial aspect of nano catalysis in achieving emission-free fuel and toxic-free effluents and the augmentation in this field is conferred. This review portrays the dependency on nano materials & technology for sustainable future.

Asunto(s)

RESUMEN

Biological approaches and coagulation are frequently used to reduce the chemical oxygen demand (COD) for treatment of ceramic effluent water. The technology known as the moving bed biofilm reactor (MBBR) can accomplish this goal. Further, the process of emulsification-aided innovative MBBR using biosurfactants can be proposed for ceramic effluent treatment. In a step-by-step upgrading scheme, biosurfactants and a consortia of halophilic and halotolerant microbial culture was utilized for the treatment of the effluent water. Over the course of 21 days, a progressive decrease in COD of up to 95.79% was achieved. Over the next 48 h period, the biochemical oxygen demand (BOD) was reduced by 98.3%, while total suspended solids (TSS) decreased by 79.41%. With the use of this innovative MBBR technology, biofilm formation accelerated, lowering the COD, BOD, and TSS levels. This allows treated water to be used for further research on recycling it back into the ceramics sector and repurposing it for agricultural purposes. PRACTITIONER POINTS: Implementation of modified MBBR technology for the treatment of effluent water. Biosurfactants could reduce in the organic and inorganic loads. Increase in MLSS values with COD removal observed. The plant operations without the use of chemical coagulants was effective with biosurfactants. Biofilm formation on carriers was scraped and the presence of surfactin and rhamnolipid was confirmed.

Asunto(s)

RESUMEN

Wetlands provide numerous ecosystem services to the environment, such as nutrient removal and storage. The aim of this work is to evaluate the nutrient dynamics in different sectors within wetland systems in the south of the Samborombón Bay (Argentina) based on hydrological and/or anthropogenic variations. For this purpose, the hydrological features of the wetland were defined through the analysis of satellite images, precipitation and tidal data, and field surveys. Three sectors were identified in the wetland: one with tidal influence, another which is dependent on rainfall, and another that receives inputs from rainfall and from a sewage effluent treatment plant. In order to analyze the nutrient dynamics, samples of surface water, groundwater, and sediments were collected from these sectors. Measurements of pH and electrical conductivity were determined in situ in water samples, while the concentration of inorganic forms of phosphorus and nitrogen, soluble reactive silica, and organic carbon were determined through laboratory analysis. Also, bioavailable phosphorus, organic matter, pH, and electrical conductivity were determined in the sediment samples collected. Statistical analysis of the data reveals differences between the sectors and allows the interpretation of the dynamics of the studied components in the wetland. Electrical conductivity distinguishes the intertidal sectors of the wetland while components associated with P and N discriminate the sectors with inputs from the sewage effluent treatment plant. On the other hand, soluble reactive silica, organic carbon, and organic matter do not seem to be influenced by the tide or effluent discharge. This study demonstrates that the studied wetland works as a nutrient retention area, providing ecosystem services to local inhabitants. Although these services can be utilized, they require a continuous monitoring over time to provide an early warning in case the variations in P and N cycles could lead to eutrophication or wetland degradation.

RESUMEN

Every year a large amount of clean water turns into contaminated effluent by soil washing (SW) process. The release of this effluent has become a growing environmental threat. In this study, a sustainable approach was developed for effective removal of PAHs from contaminated soil and the effluent by integrating SW and advanced oxidation processes (AOPs) in a continuous system. In the constructed continuous system, first small amount of clean water passed through the contaminated soil to remove PAHs. Then, the polluted effluent was treated by a quick AOPs and recycled for SW processes again and again until a complete removal of PHE be achieved. The performance of the continuous system was optimized and compared with batch system (no circulation) at lab scale. In addition, a scale up modeling was developed to predict the performance of continuous system at large scale. According to the results, under the optimum conditions: Tween 80 (TW80) = 6 g/L, ultrasonic = 160 kW, UV = 30 W, O3 = 5 g/h and TiO2 = 2 g/m2, the final PHE degradation efficiency of 98 % and 94 % were achieved by the continuous and batch systems after 130 and 185 min, respectively. The continuous system used 5 times less water volume than the batch system but resulted in better PAHs degradation. The scale up modeling revealed at large scale (100 kg soil), the continuous system could decrease the energy consumption and the required washing solution (water + TW80) up to 50 % and 80 %, respectively in comparison to the batch system. This work suggests a promising and practical approach for contaminated soil remediation without producing polluted water.

Asunto(s)

RESUMEN

Resumen Introducción: La industria acuícola está en constante crecimiento, registrando una producción mundial de casi 88 millones de toneladas para el año 2020. Esta industria trae consigo problemas ambientales si sus efluentes no son debidamente tratados. En el 2020, se constituyó la primera empresa de base tecnológica del CONICET en la Patagonia Argentina cuyo propósito es la producción acuícola del erizo verde de mar, Arbacia dufresnii con la finalidad de elaborar una gama de productos nutracéuticos. Su sistema de cultivo conlleva un compromiso de sustentabilidad desde su creación, y sin embargo genera efluentes con niveles altos de nitratos y fosfatos. Objetivo: Ante este escenario, y valorizando la biorremediación como herramienta de tratamiento de aguas, se propone en este trabajo la utilización de las microalgas marinas como agentes fitorremediadores del efluente acuícola. Métodos: Se utilizaron las microalgas Chaetoceros gracilis, Navicula sp., Tetraselmis suecica., Rhodomona salina., Nanochloropsis galvana y Cylindrotheca closterium, las cuales son usadas como alimento de las larvas del erizo en el proceso productivo. Se diseñó un experimento que compara el crecimiento microalgal y la capacidad de remoción de los nutrientes en el efluente en contraste con el medio de cultivo artificial actualmente usado en el ciclo productivo. Resultados: Es posible remediar el efluente de la industria acuícola mediante las microalgas seleccionadas, con porcentaje de eficacia de remoción del 100 % del nitrato y un porcentaje de eficacia de remoción promedio de 50 % para todas las microalgas testeadas. Asimismo, se obtuvieron valores de biomasa microalgal significativamente mayores cuando el cultivo fue realizado en el efluente respecto del cultivo en el medio artificial. Conclusiones: Los avances en investigación proporcionados en este trabajo ponen de manifiesto que es posible el aprovechamiento de un descarte para cultivar las microalgas, incluso mejorando la productividad microalgal para su uso como alimento, disminuyendo los costos involucrados en el sector de producción microalgal cambiando el uso del tipo de medio de cultivo actual (F/2) por el proveniente de un descarte. Estos avances si son escalados y validados, pueden mejorar los estándares de sustentabilidad de la industria en el marco de una economía circular.

Abstract Introduction: The aquaculture industry is constantly growing, registering a global production of almost 88 million tonnes by 2020. This industry brings environmental problems if its effluents are not properly treated. In 2020, the first technology-based company of CONICET was established in Argentine Patagonia whose purpose is the aquaculture production of the green sea urchin, Arbacia dufresnii to develop a range of nutraceutical products. Its cultivation system entails a commitment to sustainability since its creation, and yet it generates effluents with high levels of nitrates and phosphates. Objective: Given this scenario, and valuing bioremediation as a water treatment tool, the use of marine microalgae as phytoremediating agents of aquaculture effluent is proposed in this work. Methods: The microalgae Chaetoceros gracilis, Navicula sp., Tetraselmis suecica, Rhodomona salina, Nanochloropsis galvana and Cylindrotheca closterium were use; which are used as food for sea urchins larvae in the production process. An experiment was designed that compares the microalgal growth and the removal capacity of nutrients in the effluent in contrast to the artificial culture medium currently used in the production cycle. Results: It is possible to remedy the aquaculture industry's effluent by employing the selected microalgae, with a percentage of removal efficiency of 100 % of the nitrate and an average removal efficiency percentage of 50 % for all the microalgae tested. Likewise, significantly higher microalgal biomass values were obtained when the culture was carried out in the effluent the culture in the artificial environment. Conclusions: The advances in research provided in this work show that it is possible to take advantage of a discard to cultivate microalgae, even improving microalgal productivity for use as food, reducing the costs involved in the microalgal production sector by changing the use of the type of current culture medium (F/2) for that from a current discard. These advances, if scaled and validated, can improve industry sustainability standards within the framework of a circular economy.

Asunto(s)

RESUMEN

Agro-industrial discharges have higher concentrations of tannins and have been a significant cause of pollution to water bodies and soil surrounding the agro-industries. So in this study, toxic tannic acid is into commercially valuable gallic acid from the tannery effluent using immobilized microbial tannase. Tannase genes were isolated from Lactobacillus plantarum JCM 1149 (tanLpl) and Staphylococcus lugdunensis MTCC 3614 (tanA). Further, these isolated tannese genes were cloned and expressed in BL 21 host using pET 28a as an expression vector,  and immobilized in sodium alginate beads. Vegetable tannery effluent was treated by tannase-immobilized beads at 25 °C and 37 °C, where liberated gallic acid was analyzed using TLC and NMR to confirm the tannin reduction. Further, both immobilized tannases exhibited excellent reusability up to 15 cycles of regeneration without significant reduction in their activity. Moreover, we also showed that immobilized tannases tanLpl and tanA activity remained unaffected compared to the free enzyme in the presence of metal ions. Further, tanA activity remained unaffected over a wide range of pH, and tanLpl showed high thermal stability. Thus, immobilized tannase tanLpl and tanA provide a possible solution for tannery effluent treatment depending upon industry requirements and reaction composition/effluent composition, one can choose a better-immobilized tannase among the two as per the need-based requirement.

RESUMEN

As a novel trend, solid carbon sources are applied to act as electron donors and biofilm carrier in biological denitrification process. In this study, simultaneous nitrate and ammonium removal process in an airlift sequencing batch reactor using 3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) as carbon source and biofilm carrier under intermittent aeration conditions was established to treat effluent of synthetic marine recirculating aquaculture system. The results showed that maximum nitrate and ammonia nitrogen removal rates of 0.45 and 0.09 kg m-3 d-1 were achieved. No significant nitrite accumulation was found during 200-day operation, while effluent dissolved organic carbon accumulation and particle size reduction significantly increased. Microbial community analysis and batch tests illuminate that the generated sludge and attached biofilm played important roles in nitrogen removal. This study demonstrates the potential mechanism for the nitrogen removal process mediated by 3-hydroxybutyrate-co-3-hydroxyvalerate and provide a new idea for the alternative solutions of solid carbon sources.

Asunto(s)

RESUMEN

This review aims to perform an updated bibliographical survey on the cultivation of microalgae in domestic wastewater with a focus on biotechnological aspects. It was verified that the largest number of researches developed was about cultures in microalgae-bacteria consortium and mixed cultures of microalgae, followed by researches referring to the species Chlorella vulgaris and to the family Scenedesmaceae. According to published studies, these microorganisms are efficient in the biological treatment of domestic wastewater, as well as in the production of high value-added biomass, as they are capable of biosorbing the organic and inorganic compounds present in the culture medium, thus generating cells with high levels of lipids, proteins, and carbohydrates. These compounds are of great importance for different industry sectors, such as pharmaceuticals, food, and also for agriculture and aquaculture. In addition, biomolecules produced by microalgae can be extracted for several biotechnological applications; however, most studies focus on the production of biofuels, with biodiesel being the main one. There are also other emerging applications that still require more in-depth research, such as the use of biomass as a biofertilizer and biostimulant in the production of bioplastic. Therefore, it is concluded that the cultivation of microalgae in domestic wastewater is a sustainable way to promote effluent bioremediation and produce valuable biomass for the biobased industry, contributing to the development of technology for the green economy.

Asunto(s)

RESUMEN

Effluent from biogas plants can contribute to serious environmental issues due to its high organic compound content and its dark color. This study utilizes Pseudomonas putida strains isolated from activated sludge in a wastewater treatment plant to reduce the organic compound content and dark color of biogas plant effluent. The treatment of effluent from the anaerobic digestion of distillery wastewater with P. putida in the best evaluated conditions (sample concentration of 50% v/v, agitation and aeration rates of 250 rpm and 1.0 vvm for 6 days) produced significant decolorization and organic removal efficacies of 34.29 ± 0.87% and 38.94 ± 0.63%, respectively. Bioremediation efficiency was dependent on bacterial growth, and the organic content and dissolved oxygen in the sample during cultivation were key factors in bacterial growth. The naturally selected bacterium could tolerate relatively high levels of organic content and work synergistically with other indigenous microorganisms found in the biogas plant effluent. Therefore, the bioremediation of biogas plant effluent using naturally selected P. putida can feasibly be applied in biogas power plants where sterilization is not necessary.

Asunto(s)

RESUMEN

The current work investigates the efficacy of acoustic cavitation (AC) based pretreatment as a process intensification method for improving the conventional biological oxidation (BO) treatment of the effluent from common effluent treatment plant (CETP) mainly containing pharmaceutical compounds. The effluent acclimatized with cow dung-based sludge was utilized for the aerobic oxidation with an optimum condition of 1:3 ratio of sludge to effluent and 6 h as duration. COD reduction of 19.58% was achieved with the conventional biological oxidation, which was demonstrated to be improved by incorporating acoustic cavitation-based pretreatment approaches under optimized conditions of 125 W and 70% duty cycle for only AC as well as oxidant loadings as 1000 mg/L for H2O2, 250 mg/L Fe(II) with 1000 mg/L H2O2 for Fenton, 1000 mg/L for KPS and 0.5 L/min for the O3 during the combination approaches. The improved COD reduction after the use of pretreatment approaches followed by the BO of 6 h duration was 29.26%, 72.42%, 85.47%, 45.68% and 69.26% for the AC, AC + H2O2, AC + Fenton, AC + KPS and AC + O3 based approaches respectively. The toxicity assay of the effluent before and after every pretreatment approach using bacterial strains ofStaphylococcus aureusandPseudomonas aeruginosaensured the biodegradability of the treated effluent as no toxic intermediates could be seen. Overall, the present work elucidated the effectiveness of acoustic cavitation-based pretreatment approaches for the improvement of conventional BO of CETP effluent.

Asunto(s)

RESUMEN

This study investigated the enhancement effect of zero-valent iron and static magnetic field on the pollutant removal and power generation of electroactive constructed wetland. As demonstration, a conventional wetland was systematically modified by introducing zero-valent iron and then a static magnetic field, leading to progressive increases in pollutant (namely NH4+-N and chemical oxygen demand) removal efficiencies. By introducing both zero-valent iron and a static magnetic field, the power density increased four-fold to 9.2 mW/m2 and the internal resistance decreased by 26.7% to 467.4 Ω. Notably, static magnetic field decreased the relative abundance of electrochemically active bacteria (such as Romboutsia), while significantly enhancing species diversity. The permeability of the microbial cell membrane was improved, leading to a reduction in activation loss and internal resistance, thereby enhancing power generation capacity. Results showed that the addition of zero-valent iron and the applied magnetic field were beneficial to the pollutants removal and bioelectricity generation.

Asunto(s)

RESUMEN

The excessive consumption of plastic packaging, especially those produced with polyethylene terephthalate (PET), and the fact that most of them are destined for garbage have made such packaging a worrying environmental liability. Their inadequate disposal promotes the pollution of soils, watercourses, and oceans, and even the presence of component materials of these packages in the human body, in the form of microplastics, has been observed. As research in the area advances, greater concerns arise, as more problems arising from the excessive use and disposal of plastics are identified. Looking for an alternative for the destination of this material, a technology was developed for the production of materials with characteristics similar to 3D graphene. This carbon material has qualities and versatility that allow its wide use in several applications and is produced using PET as a carbon precursor. This work presents this production technology with possible variables, the characterization of the produced materials, and their potential applications. For the electronics area, such as supercapacitors, improvement points needed for validation were observed. For application as an adsorbent and use in the treatment of industrial effluents when using sand covered by carbon material, the results demonstrated efficiency. The material proved to be a potential destination for PET, as an alternative to reduce this environmental liability.

Asunto(s)

RESUMEN

In recent decades, hydrogels, as adsorption materials, have received important attention due to their characteristics and properties, such as mechanical strength, biocompatibility, biodegradability, swellability, and stimuli sensitivity. In the actual framework of sustainable development, it has been imperative to develop practical studies of hydrogels in the treatment of actual industrial effluents. Accordingly, the current work has, as its objective, to make evident hydrogels' applicability in the treatment of actual industrial effluents. For this purpose, a bibliometric analysis and systematic review based on the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) method were conducted. The relevant articles were selected from the Scopus and Web of Science databases. Some important findings were that: (1) China is the leading country when it comes to hydrogel application in actual industrial effluents, (2) the motor studies are focalized on the treatment of wastewater by hydrogels, (3) the fixed-bed columns are suitable unit equipment for the treatment of industrial effluents of using hydrogels, and (4) the hydrogels show excellent adsorption capacities of ion and dye contaminants present in industrial effluents. In summary, since the implementation of sustainable development in 2015, the progress of practical hydrogel applications in the treatment of industrial effluent has been receiving more attention, and the selected studies demonstrate the implementation viability of these materials.

RESUMEN

Water recovery from aqueous effluents in the mining and metals processing industry poses a unique challenge due to the high concentration of dissolved salts typically requiring energy intensive methods of treatment. Forward osmosis (FO) is a lower energy technology which employs a draw solution to osmotically extract water through a semi-permeable membrane further concentrating any feed. Successful FO operation relies on using a draw solution of higher osmotic pressure than the feed to extract water while minimizing concentration polarization to maximize the water flux. Previous studies employing FO on industrial feed samples commonly used concentration instead of osmotic pressures for feed and draw characterization; this led to misleading conclusions on the impact of design variables on water flux performance. By employing a factorial design of experiments methodology, this study examined the independent and interactive effects on water flux by: osmotic pressure gradient, crossflow velocity, draw salt type, and membrane orientation. With a commercial FO membrane, this work tested a solvent extraction raffinate and a mine water effluent sample to demonstrate application significance. By optimizing with osmotic gradient independent variables, water flux can be improved by over 30% without increasing energy costs or compromising the 95-99% salt rejection of the membrane.

RESUMEN

Constructed wetlands (CWs) amended with biochar have attracted much attention for nitrate removal treating secondary effluent. However, little is acknowledged about the linkage among the nitrate removal performance, microbial metabolic pathway of nitrate, and biochar properties. Herein, biochars pyrolyzed under 300 °C, 500 °C, and 700 °C (BC300, BC500, and BC700, respectively) were used in CWs to reveal the relationship. Results showed that CWs amended with BC300 (59.73%), BC500 (53.27%), and BC700 (49.07%) achieved higher nitrogen removal efficiency, compared with the control (39.51%). Metagenomic analysis showed that biochars could enrich the genes, which encoded key enzymes (adenosine triphosphate production, and electrons generation, transportation, and consumption) involved in carbon and nitrate metabolism. Further, biochar pyrolyzed under lower temperature, with higher oxygen content, molar O/C ratio, and the electron donating capacity, in CWs could obtain higher nitrate removal efficiency. Overall, this research offers new understandings for the promotion of denitrification in CWs amended with biochar.

Asunto(s)

RESUMEN

Enzymatic (laccase mediated) decolorization of dyes remains inefficient for recalcitrant dyes, which can be better handled by electrocoagulation (EC). However, EC is energy intensive and produce large amount of sludge. In light of the same, present study offers a promising solution for the treatment of textile effluent meeting surface discharge norms, using hybridization of enzymatic and electrocoagulation treatment. The findings revealed best color removal (90%) of undiluted (raw) textile effluent (4592 hazen) is achievable by employing EC using zinc-coated iron electrode at current density 25 mA cm-2 followed by partially purified laccase (LT) treatment, and activated carbon (AC) polishing at ambient conditions. Overall, the decolorization performance of Hybrid EC-LT integrated AC approach was 1.95 times better than only laccase treatment. Also, the sludge generation from Hybrid EC-LT integrated AC (0.7 g L-1) was 3.3 times lesser than EC alone (2.1 g L-1). Therefore, the present study recommends Hybrid EC-LT integrated AC could be potential approach to treat complex textile effluent sustainably with lower energy input and waste sludge generation.

Asunto(s)

RESUMEN

Fishing industries are characterized by high water consumption and a considerable content of organic matter and salt in their wastewater. In this work, a combined electrochemical process was studied at laboratory scale for the treatment of real wastewater from the processing of mackerel from an industrial facility located in the province of Buenos Aires that discharges to the sewer, which the plant is currently using and does not produce an effluent in discharge conditions. Taking advantage of the high conductivity of these effluents, in the electrocoagulation stage with aluminum anodes, it was possible to remove the coarsest fraction of suspended matter, achieving a Chemical Oxygen Demand (COD) removal of about 60%, at pH 7.5, showing a higher efficiency over the conventional treatment. Despite this superiority, the necessary removal was still not achieved; therefore, the wastewater treated by electrocoagulation was then subjected to electrooxidation, using a graphite anode and a titanium cathode, and with a first-order oxidation kinetics, achieving a final COD value lower than the discharge limit, after 7.5 min of processing at pH 6, obtaining an efficient treatment for removal of high concentrations dissolved organic matter and colloidal/suspended particles in this kind of effluent. All treatments were performed in batches. The removal of pollutants in the wastewater was verified by means of spectroscopic and voltammetric techniques; at the same time, these techniques, together with SEM-EDX analysis, proved the superiority of electrocoagulation over chemical coagulation. This study laid the groundwork for the design of modifications to the plant to achieve discharge parameters in accordance with current legislation.

RESUMEN

The treatment and surfactant recovery of soil washing/flushing effluent containing high levels of surfactants and organic pollutants are critical for the surfactant-assisted remediation of soils and waste management due to their complexity and high-potential risks. Combination of waste activated sludge material (WASM) and a kinetic-based two-stage system design was introduced in this study as a novel strategy for the separation of phenanthrene and pyrene from Tween 80 solutions. The results showed that WASM can effectively sorb phenanthrene and pyrene with high affinities (Kd) of 2325.5 L·kg-1 and 9911.2 L·kg-1, respectively. This allowed a high-level recovery of Tween 80 of 90.47 ± 1.86%, with selectivity of up to 69.7. In addition, a two-stage design was constructed, and the results showed an improved reaction time (approximately 5% of equilibrium time in conventional single-stage process) and increased the separation levels of phenanthrene or pyrene from Tween 80 solutions. For instance, the minimal total operating time for the sorption of 99% pyrene from 1.0 g·L-1 Tween 80 was only 23.0 min in the two-stage process compared to that of 480 min with a 71.9% removal level in the single-stage system. Results indicated that the combination of low-cost waste WASH and two-stage design was a high-efficiency and time-saving way to recover surfactants from soil washing effluents.

Asunto(s)