RESUMEN

The objective of the study was to investigate the 5.25% sodium hypochlorite (NaOCl) penetration into the dentinal tubules after different irrigation methods. Seventy canines were stained with 1% crystal violet and divided into groups (n = 20): GEC-EasyClean; GPUI-E1 Irrisonic ultrasonic insert; GXP-XP-Endo finisher; GPC-conventional irrigation and GNC-stained tooth without irrigation. Axial sections (16×) were assessed and irrigant penetration was quantified as a bleaching halo on the surface of the apical, middle and coronal third. In the apical third, GPUI promoted greater NaOCl penetration (p < 0.05). GXP was better than GEC (p < 0.05), as was GPC (p > 0.05). The GPUI and GXP groups were similar in the middle and coronal third (p > 0.05). GPUI and GXP showed better results than GEC (p < 0.05). GPUI was more effective in the apical third and like GXP in the cervical and middle third.

Asunto(s)

RESUMEN

This study aims to evaluate, by micro-computed tomography, the filling capacity of two root canal dressings (RCD) - Bio-C Temp and Ultracal - after different activation protocols in teeth with simulated internal root resorption. Eighty single-rooted bovine teeth were sectioned in the cervical portion, standardizing the roots at 16 mm. Then, the canals were prepared by the apex-crown technique until instrument #80 using 2mL of 2.5% sodium hypochlorite solution at each instrument change. Afterward, the roots were sectioned longitudinally, and internal root resorptions were simulated using a diamond bur 1016 at 5 mm from the root apex. Hemiroots were joined and fixed with cyanoacrylate, scanned in micro-computed tomography (micro-CT) to assess total canal volume and simulated internal resorption, and then divided by stratified randomization into experimental groups according to RCD and method of activation (n = 10): Ultracal/Syringe; Ultracal/PUI, Ultracal/XP Endo Finisher, Ultracal Easy Clean, Bio-C Temp/Syringe, Bio-C Temp/PUI, Bio-C Temp/XP Endo Finisher and Bio-C/Easy Clean. Another scanning was performed to assess the volume of voids after RCD activation methods. The ANOVA and Tukey tests compared the activation methods. Student's T-test compared the RCDs within each activation method. Initial root canal volume values were similar for all groups (P > 0.05). There was no difference between activation protocols (P > 0.05). Higher volumes of void spaces were observed for Bio-C Temp compared to Ultracal after all activation methods (P < 0.05), except for Easy Clean (P > 0.05). Due to this, it can be concluded that the agitation methods tested for the Bio-C Temp and Ultracal pastes did not improve the filling of bovine teeth with simulated internal root resorption.

RESUMEN

Aims: This study aims to evaluate, by micro-computed tomography, the filling capacity of two root canal dressings (RCD) -Bio-C Temp and Ultracal -after different activation protocols in teeth with simulated internal root resorption.Materials and methods: Eighty single-rooted bovine teeth were sectioned in the cervical portion, standardizing the roots at 16 mm. Then, the canals were prepared by the apex-crown technique until instrument #80 using 2mL of 2.5% sodium hypochlorite solution at each instrument change. Afterward, the roots were sectioned longitudinally, and internal root resorptions were simulated using a diamond bur 1016 at 5 mm from the root apex. Hemiroots were joined and fixed with cyanoacrylate, scanned in micro-computed tomography (micro-CT) to assess total canal volume and simulated internal resorption, and then divided by stratified randomization into experimental groups according to RCD and method of activation (n = 10): Ultracal/Syringe; Ultracal/PUI, Ultracal/XP Endo Finisher, Ultracal Easy Clean, Bio-C Temp/Syringe, Bio-C Temp/PUI, Bio-C Temp/XP Endo Finisher and Bio-C/Easy Clean. Another scanning was performed to assess the volume of voids after RCD activation methods. The ANOVA and Tukey tests compared the activation methods. Student's T-test compared the RCDs within each activation method. Initial root canal volume values were similar for all groups (P > 0.05).Results:There was no difference between activation protocols (P > 0.05). Higher volumes of void spaces were observed for Bio-C Temp compared to Ultracal after all activation methods (P < 0.05), except for Easy Clean (P > 0.05).Conclusion:It can be concluded that the agitation methods tested for the Bio-C Temp and Ultracal pastes did not improve the filling of bovine teeth with simulated internal root resorption.

RESUMEN

Aims: This study aims to evaluate, by micro-computed tomography, the filling capacity of two root canal dressings (RCD) -Bio-C Temp and Ultracal -after different activation protocols in teeth with simulated internal root resorption.Materials and methods: Eighty single-rooted bovine teeth were sectioned in the cervical portion, standardizing the roots at 16 mm. Then, the canals were prepared by the apex-crown technique until instrument #80 using 2mL of 2.5% sodium hypochlorite solution at each instrument change. Afterward, the roots were sectioned longitudinally, and internal root resorptions were simulated using a diamond bur 1016 at 5 mm from the root apex. Hemiroots were joined and fixed with cyanoacrylate, scanned in micro-computed tomography (micro-CT) to assess total canal volume and simulated internal resorption, and then divided by stratified randomization into experimental groups according to RCD and method of activation (n = 10): Ultracal/Syringe; Ultracal/PUI, Ultracal/XP Endo Finisher, Ultracal Easy Clean, Bio-C Temp/Syringe, Bio-C Temp/PUI, Bio-C Temp/XP Endo Finisher and Bio-C/Easy Clean. Another scanning was performed to assess the volume of voids after RCD activation methods. The ANOVA and Tukey tests compared the activation methods. Student's T-test compared the RCDs within each activation method. Initial root canal volume values were similar for all groups (P > 0.05).Results:There was no difference between activation protocols (P > 0.05). Higher volumes of void spaces were observed for Bio-C Temp compared to Ultracal after all activation methods (P < 0.05), except for Easy Clean (P > 0.05).Conclusion:It can be concluded that the agitation methods tested for the Bio-C Temp and Ultracal pastes did not improve the filling of bovine teeth with simulated internal root resorption

RESUMEN

This study compared standard needle irrigation, passive ultrasonic irrigation, XP-Endo Finisher and Easy Clean in the apical extrusion of sodium hypochlorite (NaOCl) in a model simulating immature teeth. Ten bovine teeth were maintained in suspension in a container with the apical portion in contact with 0.2% agarose gel containing 0.1% metacresol purple. The canals were irrigated with 2.5% NaOCl, according to each irrigation protocol. After 3 min, apical extrusion of NaOCl was observed by the colour gel change when in contact with NaOCl. The containers were photographed, and the NaOCl extrusion area was measured. All protocols showed NaOCl extrusion, providing similar area (P > 0.05). Considering the similarity among the studied protocols, all of them can be considered during the endodontic treatment of immature teeth. Further studies on the particularities of immature teeth should be performed to evaluate cell viability, cleaning efficiency, disinfection capacity and dentin removal promoted by the irrigation protocols.

Asunto(s)

RESUMEN

CONTEXT: The use of chemicals solutions and means of activation is of utmost importance in endodontic treatment. AIMS: This study compared three activation techniques used in the final irrigation of the endodontic treatment. SUBJECTS AND METHODS: Eighty uniradicular teeth were instrumented with the Protaper Universal system up to F4 file. After decalcification, the teeth had artificial lateral canals created at 2, 4.5 and 6 mm from working length (WL). The groups were randomly divided into four groups (n = 20): control group (C), passive ultrasonic irrigation (PUI) group, continuous ultrasonic irrigation (CUI) group, and easy clean (EC) group. The penetration of the irrigant into the samples was evaluated using image observation using the Image J program. STATISTICAL ANALYSIS USED: The level of agreement among the observers was determined by the Cronbach's alpha test. The likelihood ratio test was used to evaluate possible differences between the groups and the Kendall's W statistic test to verify possible differences between the irrigant penetration levels in the lateral canals. The Fisher's exact test was applied to verify differences by the studied group considering the WL variables and lateral canals. RESULTS: The results showed no statistical difference in the penetration of the irrigator in the main canal when compared to the C, PUI, CUI, and EC groups (P > 0.05). CONCLUSIONS: The method using a positive syringe and needle pressure was not able to effectively carry the irrigator to the artificially made lateral canals, whereas PUI, CUI, and EC were equally efficient in this regard (P < 0.01).

RESUMEN

In this review, we present a framework to guide the design of surfaces which are resistant to solid fouling, based on the modulus and length scale of the fouling material. Solid fouling is defined as the undesired attachment of solid contaminants including ice, clathrates, waxes, inorganic scale, polymers, proteins, dust and biological materials. We first provide an overview of the surface design approaches typically applied across the scope of solid fouling and explain how these disparate research efforts can be united to an extent under a single framework. We discuss how the elastic modulus and the operating length scale of a foulant determine its ability or inability to elastically deform surfaces. When surface deformation occurs, minimization of the substrate elastic modulus is critical for the facile de-bonding of a solid contaminant. Foulants with low modulus or small deposition sizes cannot deform an elastic bulk material and instead de-bond more readily from surfaces with chemistries that minimize their interfacial free energy or induce a particular repellant interaction with the foulant. Overall, we review reported surface design strategies for the reduction in solid fouling, and provide perspective regarding how our framework, together with the modulus and length scale of a foulant, can guide future antifouling surface designs. This article is part of the theme issue 'Bioinspired materials and surfaces for green science and technology'.

RESUMEN

AIM: The purpose of this study was to evaluate the influence of widening the apical root canal preparation (RCP) on the efficiency of different ethylenediaminetetraacetic acid (EDTA) agitation protocols on smear layer removal: EDTA; EDTA + Easy Clean in rotary movement (ECROT); EDTA + Easy Clean in reciprocating movement (ECREC); and EDTA + Passive ultrasonic irrigation (PUI). MATERIALS AND METHODS: A total of 80 mandibular premolars had their crowns sectioned and then were divided into two groups according to widening: size 25 or 40, 0.08 taper. Sequentially they were once again allocated to subgroups according to the agitation protocol performing eight experimental groups (n = 10). Ten additional teeth were prepared for controls (C+/C-). The specimens were then submitted to the cleaning protocols and thereafter cleaved and microphotographed by variable pressure scanning electron microscopy (SEM) at previously determined points along their root thirds (750*). Scores were attributed to the images, and data were analyzed by the Kruskal-Wallis, Student-Newman-Keuls and Friedman tests. RESULTS: A higher widening was observed to have a positive influence on cleaning efficiency offering significant differences in global and apical third evaluations (p < 0.05). Relative to the agitation, significant differences were observed mainly in the apical third, with PUI and ECROT providing the best results (p < 0.05); no difference for C+ was observed when higher widening was employed. CONCLUSION: A greater widening of the apical third provided a significant improvement in the action of the agitation/activation protocols. Moreover, the PUI and ECROT activation methods were shown to be superior to the use of EDTA solely, particularly in the apical third. CLINICAL SIGNIFICANCE: The findings of this study reinforce the need for clinical use of additional methods to complement cleaning. Therefore, it is important for professionals to have knowledge and command of these protocols to obtain more satisfactory results.

Asunto(s)

RESUMEN

O objetivo do presente estudo foi avaliar a efetividade na redução bacteriana de um protocolo de irrigação final de canais radiculares com infecção primária utilizando o sistema Easy Clean. Vinte e quatro canais radiculares com infecções endodônticas primárias crônicas foram analisados. As amostras foram coletadas com 3 pontas de papel estéreis em meio de transporte microbiológico antes da instrumentação (S1), após instrumentação rotatória com dois sistemas diferentes (S2), e após o protocolo final de irrigação utilizando o Easy Clean para agitação das soluções de irrigação (S3). Técnica de cultura foi utilizada para determinar a contagem de unidades formadoras de colônia (UFC/mL). Os resultados foram analisados estatisticamente pelo teste Mann-Whitney ao nível de significância de 5% para comparação entre as variáveis. Bactérias foram detectadas em 100% dos casos analisados, mostrando em S1 uma média de 2,0x106 UFC/mL, em S2 2,3x104 UFC/mL e em S3 6,6x103 UFC/mL. Em conclusão, embora não tenha sido estatisticamente significante, houve uma redução no número de bactérias após o uso da Easy Clean. Portanto, pode-se sugerir que o protocolo final de irrigação com o auxílio do Easy Clean auxilia na redução de bactérias(AU)

The objective of the present study was to evaluate the effectiveness in the bacterial reduction of a final irrigation protocol of root canals with primary infection using the Easy Clean system. Twenty-four root canals with chronic primary infection were analyzed. Samples were collected with 3 sterile paper points in microbiological transport medium before instrumentation (S1), after rotary instrumentation with two different systems (S2), and after the final irrigation protocol using the Easy Clean system for agitation irrigating solutions (S3). Culture technique was used to determine the count of colony forming units (CFU/mL). The results were statiscally analyzed by the MannWhitney test at a significance level of 5% for comparison among the variables. Bacteria were detected in 100% of analyzed cases, showing in S1a mean of 2.0x106 CFU/mL, in S2 2.3x104 CFU/mL, and in S3 6.6x103 CFU/mL. Statistically significant differences were found between the rotary systems Protaper Next and HyFlex CM in the reduction of the bacterial load, but not in the analysis before and after Easy Clean. In conclusion, although not statistically significant, there was a reduction in the number of bacteria after using Easy Clean. Therefore, it could be suggested that the final irrigation protocol with the aid Easy Clean assists in the reduction of bacteria(AU)

Asunto(s)