RESUMEN

Artisanal and small-scale mining (ASM) significantly influences the socio-economic development of many low-to-middle-income countries, albeit sometimes at the expense of environmental and human health. Characterized by its labor-intensive extraction from confined (<5 ha) or peripheral mineral reserves, congregated ASM practices can rival the spatial footprint of industrial mines. The unregulated and informal nature of many ASM activities presents monitoring challenges that remote sensing (RS) methods aim to address. While local-scale ASM mapping has seen success, scaling these methods to regional or global levels remains unclear. We review literature on mapping ASM to determine: (1) if studies represent the global distribution and diversity of ASM activities, (2) how ASM's unique characteristics influence the choice of RS methods, and (3) which RS approaches are the most accurate and cost-effective. We found current studies disproportionately focused on ASM regions in Africa, which highlights the need to extend the research to other regions with unique ASM characteristics, such as coal and sand mining in India and China. The selection of RS approaches is heavily influenced by local ASM contexts, the scale of analysis, and resource constraints such as funding for high-resolution imagery and validation data availability. We argue that accurate regional-scale ASM mapping (>100,000 km2) requires innovative combinations of data and methods to overcome data management and storage challenges. Local community participation, including miners, is vital for on-ground mapping and monitoring capacity. We outline a research agenda needed to develop a range of approaches for mapping and monitoring ASM in under-studied regions. By synthesizing effective methods, we provide a foundation for generating accurate and comprehensive spatial data, addressing the issues of inaccurate and incomplete data that global ASM platforms aim to resolve. This spatial data can guide policymakers, NGOs, and businesses in making informed decisions and targeted interventions to improve ASM sector safety, sustainability, and efficiency. Leveraging cloud-based geoprocessing platforms, with regularly updated global satellite image archives, combined with crowd-sourced on-ground information offers a potential solution for sustained regional-scale monitoring.

RESUMEN

As we strive towards the ambitious goal of malaria elimination, we must embrace integrated strategies and interventions. Like many diseases, malaria is heterogeneously distributed. This inherent spatial component means that geography and geospatial data is likely to have an important role in malaria control strategies. For instance, focussing interventions in areas where malaria risk is highest is likely to provide more cost-effective malaria control programmes. Equally, many malaria vector control strategies, particularly interventions like larval source management, would benefit from accurate maps of malaria vector habitats - sources of water that are used for malarial mosquito oviposition and larval development. In many landscapes, particularly in rural areas, the formation and persistence of these habitats is controlled by geographical factors, notably those related to hydrology. This is especially true for malaria vector species like Anopheles funestsus that show a preference for more permanent, often naturally occurring water sources like small rivers and spring-fed ponds. Previous work has embraced geographical concepts, techniques, and geospatial data for studying malaria risk and vector habitats. But there is much to be learnt if we are to fully exploit what the broader geographical discipline can offer in terms of operational malaria control, particularly in the face of a changing climate. This chapter outlines potential new directions related to several geographical concepts, data sources and analytical approaches, including terrain analysis, satellite imagery, drone technology and field-based observations. These directions are discussed within the context of designing new protocols and procedures that could be readily deployed within malaria control programmes, particularly those within sub-Saharan Africa, with a particular focus on experiences in the Kilombero Valley and the Zanzibar Archipelago, United Republic of Tanzania.

Asunto(s)

RESUMEN

Real-Time RFI Detection and Flagging (RT-RDF) for microwave radiometers is a versatile new FPGA algorithm designed to detect and flag Radio-Frequency Interference (RFI) in microwave radiometers. This block utilizes computationally-efficient techniques to identify and analyze RF signals, allowing the system to take appropriate measures to mitigate interference and maintain reliable performance. With L-Band microwave radiometry as the main application, this RFI detection algorithm focuses on the Kurtogram and Spectrogram to detect non-Gaussian behavior. To gain further modularity, an FFT-based filter bank is used to divide the receiver's bandwidth into several sub-bands within the band of interest of the instrument, depending on the application. Multiple blanking strategies can then be applied in each band using the provided detection flags. The algorithm can be re-configured in the field, for example with dynamic integration times to support operation in different environments, or configurable thresholds to account for variable RFI environments. A validation and testing campaign has been performed on multiple scenarios with the ARIEL commercial microwave radiometer, and the results confirm the excellent performance of the system.

RESUMEN

Culex pipiens, an important vector of many vector borne diseases, is a species capable to feeding on a wide variety of hosts and adapting to different environments. To predict the potential distribution of Cx. pipiens in central Italy, this study integrated presence/absence data from a four-year entomological survey (2019-2022) carried out in the Abruzzo and Molise regions, with a datacube of spectral bands acquired by Sentinel-2 satellites, as patches of 224 × 224 pixels of 20 meters spatial resolution around each site and for each satellite revisit time. We investigated three scenarios: the baseline model, which considers the environmental conditions at the time of collection; the multitemporal model, focusing on conditions in the 2 months preceding the collection; and the MultiAdjacency Graph Attention Network (MAGAT) model, which accounts for similarities in temperature and nearby sites using a graph architecture. For the baseline scenario, a deep convolutional neural network (DCNN) analyzed a single multi-band Sentinel-2 image. The DCNN in the multitemporal model extracted temporal patterns from a sequence of 10 multispectral images; the MAGAT model incorporated spatial and climatic relationships among sites through a graph neural network aggregation method. For all models, we also evaluated temporal lags between the multi-band Earth Observation datacube date of acquisition and the mosquito collection, from 0 to 50 days. The study encompassed a total of 2,555 entomological collections, and 108,064 images (patches) at 20 meters spatial resolution. The baseline model achieved an F1 score higher than 75.8% for any temporal lag, which increased up to 81.4% with the multitemporal model. The MAGAT model recorded the highest F1 score of 80.9%. The study confirms the widespread presence of Cx. pipiens throughout the majority of the surveyed area. Utilizing only Sentinel-2 spectral bands, the models effectively capture early in advance the temporal patterns of the mosquito population, offering valuable insights for directing surveillance activities during the vector season. The methodology developed in this study can be scaled up to the national territory and extended to other vectors, in order to support the Ministry of Health in the surveillance and control strategies for the vectors and the diseases they transmit.

RESUMEN

Multi-source remote sensing-derived information on crops contributes significantly to agricultural monitoring, assessment, and management. In Africa, some challenges (i.e., small-scale farming practices associated with diverse crop types and agricultural system complexity, and cloud coverage during the growing season) can imped agricultural monitoring using multi-source remote sensing. The combination of optical remote sensing and synthetic aperture radar (SAR) data has emerged as an opportune strategy for improving the precision and reliability of crop type mapping and monitoring. This work aims to conduct an extensive review of the challenges of agricultural monitoring and mapping in Africa in great detail as well as the current research progress of agricultural monitoring based on optical and Radar satellites. In this context optical data may provide high spatial resolution and detailed spectral information, which allows for the differentiation of different crop types based on their spectral signatures. However, synthetic aperture radar (SAR) satellites can provide important contributions given the ability of this technology to penetrate cloud cover, particularly in African tropical regions, as opposed to optical data. This review explores various combination techniques employed to integrate optical and SAR data for crop type classification and their applicability and limitations in the context of African countries. Furthermore, challenges are discussed in this review as well as and the limitations associated with optical and SAR data combination, such as the data availability, sensor compatibility, and the need for accurate ground truth data for model training and validation. This study also highlights the potential of advanced modelling (i.e., machine learning algorithms, such as support vector machines, random forests, and convolutional neural networks) in improving the accuracy and automation of crop type classification using combined data. Finally, this review concludes with future research directions and recommendations for utilizing optical and SAR data combination techniques in crop type classification for African agricultural systems. Furthermore, it emphasizes the importance of developing robust and scalable classification models that can accommodate the diversity of crop types, farming practices, and environmental conditions prevalent in Africa. Through the utilization of combined remote sensing technologies, informed decisions can be made to support sustainable agricultural practices, strengthen nutritional security, and contribute to the socioeconomic development of the continent.

RESUMEN

In many areas of engineering, the design of a new system usually involves estimating performance-related parameters from early stages of the project to determine whether a given solution will be compliant with the defined requirements. This aspect is particularly relevant during the design of satellite payloads, where the target environment is not easily accessible in most cases. In the context of Earth observation sensors, this problem has been typically solved with the help of a set of complex pseudo-empirical models and/or expensive laboratory equipment. This paper describes a more practical approach: the illumination conditions measured by an in-orbit payload are recreated on ground with the help of a replica of the same payload so the performance of another Earth observation sensor in development can be evaluated. The proposed method is specially relevant in the context of small satellites, as the possibility of having extra units devoted to these tasks becomes greater as costs are reduced. The results obtained using this method in an actual space mission are presented in this paper, giving valuable information that will help in further stages of the project.

RESUMEN

Arthropods contribute importantly to ecosystem functioning but remain understudied. This undermines the validity of conservation decisions. Modern methods are now making arthropods easier to study, since arthropods can be mass-trapped, mass-identified, and semi-mass-quantified into 'many-row (observation), many-column (species)' datasets, with homogeneous error, high resolution, and copious environmental-covariate information. These 'novel community datasets' let us efficiently generate information on arthropod species distributions, conservation values, uncertainty, and the magnitude and direction of human impacts. We use a DNA-based method (barcode mapping) to produce an arthropod-community dataset from 121 Malaise-trap samples, and combine it with 29 remote-imagery layers using a deep neural net in a joint species distribution model. With this approach, we generate distribution maps for 76 arthropod species across a 225 km2 temperate-zone forested landscape. We combine the maps to visualize the fine-scale spatial distributions of species richness, community composition, and site irreplaceability. Old-growth forests show distinct community composition and higher species richness, and stream courses have the highest site-irreplaceability values. With this 'sideways biodiversity modelling' method, we demonstrate the feasibility of biodiversity mapping at sufficient spatial resolution to inform local management choices, while also being efficient enough to scale up to thousands of square kilometres. This article is part of the theme issue 'Towards a toolkit for global insect biodiversity monitoring'.

Asunto(s)

RESUMEN

Soda lakes are some of the most productive aquatic ecosystems.1 Their alkaline-saline waters sustain unique phytoplankton communities2,3 and provide vital habitats for highly specialized biodiversity including invertebrates, endemic fish species, and Lesser Flamingos (Phoeniconaias minor).1,4 More than three-quarters of Lesser Flamingos inhabit the soda lakes of East Africa5; however, populations are in decline.6 Declines could be attributed to their highly specialized diet of cyanobacteria7 and dependence on a network of soda lake feeding habitats that are highly sensitive to climate fluctuations and catchment degradation.8,9,10,11,12 However, changing habitat availability has not been assessed due to a lack of in situ water quality and hydrology data and the irregular monitoring of these waterbodies.13 Here, we combine satellite Earth observations and Lesser Flamingo abundance observations to quantify spatial and temporal trends in productivity and ecosystem health over multiple decades at 22 soda lakes across East Africa. We found that Lesser Flamingo distributions are best explained by phytoplankton biomass, an indicator of food availability. However, timeseries analyses revealed significant declines in phytoplankton biomass from 1999 to 2022, most likely driven by substantial rises in lake water levels. Declining productivity has reduced the availability of healthy soda lake ecosystems, most notably in equatorial Kenya and northern Tanzania. Our results highlight the increasing vulnerability of Lesser Flamingos and other soda lake biodiversity in East Africa, particularly with increased rainfall predicted under climate change.14,15,16 Without improved lake monitoring and catchment management practices, soda lake ecosystems could be pushed beyond their environmental tolerances. VIDEO ABSTRACT.

Asunto(s)

RESUMEN

Global coarse-resolution (≥250 m) burned area (BA) products have been used to estimate fire related forest loss, but we hypothesised that a significant part of fire impacts might be undetected because of the underestimation of small fires (<100 ha), especially in the tropics. In this paper, we analysed fire-related forest cover loss in sub-Saharan Africa (SSA) for 2016 and 2019 based on a BA product generated from Sentinel-2 data (20 m), which was observed to have significantly lower omission errors than the coarse-resolution BA products. Using these higher resolution BA datasets, we found that fires contribute to >46 % of total forest losses over SSA, more than twice the estimates from coarse-resolution BA products. In addition, burned forest areas showed more than twofold likelihood of subsequent loss compared to unburned ones. In moist tropical forests, the most fire-vulnerable biome, burning had even six times more chance to precede forest loss than unburned areas. We also found that fire-related characteristics, such as fire size and season, and forest fragmentation play a major role in the determination of tree cover fate. Our results reveal that medium-resolution BA detects more fires in late fire season, which tend to have higher impact on forests than early season ones. On the other hand, small fires represented the major driver of forest loss after fires and the vast majority of these losses occur in fragmented landscapes near forest edge (<260 m). Therefore medium-resolution BA products are required to obtain a more accurate evaluation of fire impacts in tropical ecosystems.

RESUMEN

BACKGROUND: The application of different approaches calculating the anthropogenic carbon net flux from land, leads to estimates that vary considerably. One reason for these variations is the extent to which approaches consider forest land to be "managed" by humans, and thus contributing to the net anthropogenic flux. Global Earth Observation (EO) datasets characterising spatio-temporal changes in land cover and carbon stocks provide an independent and consistent approach to estimate forest carbon fluxes. These can be compared against results reported in National Greenhouse Gas Inventories (NGHGIs) to support accurate and timely measuring, reporting and verification (MRV). Using Brazil as a primary case study, with additional analysis in Indonesia and Malaysia, we compare a Global EO-based dataset of forest carbon fluxes to results reported in NGHGIs. RESULTS: Between 2001 and 2020, the EO-derived estimates of all forest-related emissions and removals indicate that Brazil was a net sink of carbon (- 0.2 GtCO2yr-1), while Brazil's NGHGI reported a net carbon source (+ 0.8 GtCO2yr-1). After adjusting the EO estimate to use the Brazilian NGHGI definition of managed forest and other assumptions used in the inventory's methodology, the EO net flux became a source of + 0.6 GtCO2yr-1, comparable to the NGHGI. Remaining discrepancies are due largely to differing carbon removal factors and forest types applied in the two datasets. In Indonesia, the EO and NGHGI net flux estimates were similar (+ 0.6 GtCO2 yr-1), but in Malaysia, they differed in both magnitude and sign (NGHGI: -0.2 GtCO2 yr-1; Global EO: + 0.2 GtCO2 yr-1). Spatially explicit datasets on forest types were not publicly available for analysis from either NGHGI, limiting the possibility of detailed adjustments. CONCLUSIONS: By adjusting the EO dataset to improve comparability with carbon fluxes estimated for managed forests in the Brazilian NGHGI, initially diverging estimates were largely reconciled and remaining differences can be explained. Despite limited spatial data available for Indonesia and Malaysia, our comparison indicated specific aspects where differing approaches may explain divergence, including uncertainties and inaccuracies. Our study highlights the importance of enhanced transparency, as set out by the Paris Agreement, to enable alignment between different approaches for independent measuring and verification.

RESUMEN

Processing single high-resolution satellite images may provide a lot of important information about the urban landscape or other applications related to the inventory of high-altitude objects. Unfortunately, the direct extraction of specific features from single satellite scenes can be difficult. However, the appropriate use of advanced processing methods based on deep learning algorithms allows us to obtain valuable information from these images. The height of buildings, for example, may be determined based on the extraction of shadows from an image and taking into account other metadata, e.g., the sun elevation angle and satellite azimuth angle. Classic methods of processing satellite imagery based on thresholding or simple segmentation are not sufficient because, in most cases, satellite scenes are not spectrally heterogenous. Therefore, the use of classical shadow detection methods is difficult. The authors of this article explore the possibility of using high-resolution optical satellite data to develop a universal algorithm for a fully automated estimation of object heights within the land cover by calculating the length of the shadow of each founded object. Finally, a set of algorithms allowing for a fully automatic detection of objects and shadows from satellite and aerial imagery and an iterative analysis of the relationships between them to calculate the heights of typical objects (such as buildings) and atypical objects (such as wind turbines) is proposed. The city of Warsaw (Poland) was used as the test area. LiDAR data were adopted as the reference measurement. As a result of final analyses based on measurements from several hundred thousand objects, the global accuracy obtained was ±4.66 m.

RESUMEN

With an increasing number of offshore wind farms, monitoring and evaluating the effects of the wind turbines on the marine environment have become important tasks. Here we conducted a feasibility study with the focus on monitoring these effects by utilizing different machine learning methods. A multi-source dataset for a study site in the North Sea is created by combining satellite data, local in situ data and a hydrodynamic model. The machine learning algorithm DTWkNN, which is based on dynamic time warping and k-nearest neighbor, is used for multivariate time series data imputation. Subsequently, unsupervised anomaly detection is performed to identify possible inferences in the dynamic and interdepending marine environment around the offshore wind farm. The anomaly results are analyzed in terms of location, density and temporal variability, granting access to information and building a basis for explanation. Temporal detection of anomalies with COPOD is found to be a suitable method. Actionable insights are the direction and magnitude of potential effects of the wind farm on the marine environment, depending on the wind direction. This study works towards a digital twin of offshore wind farms and provides a set of methods based on machine learning to monitor and evaluate offshore wind farm effects, supporting stakeholders with information for decision making on future maritime energy infrastructures.

RESUMEN

Increasing attention is being given to the effect of climate change on schistosomiasis, but the impact is currently unknown. As the intermediate snail host (Neotricula aperta) of Schistosoma mekongi inhabits the Mekong River, it is thought that environmental factors affecting the area of water will have an impact on the occurrence of schistosomiasis mekongi. The aim of the present study was to assess the impact of precipitation on the prevalence of human schistosomiasis mekongi using epidemiological data and Earth observation satellite data in Khong district, Champasak province, Lao PDR. Structural equation modelling (SEM) using epidemiological data and Earth observation satellite data was conducted to determine the factors associated with the number of schistosomiasis mekongi patients. As a result, SEM identified 3 significant factors independently associated with schistosomiasis mekongi: (1) a negative association with mass drug administration (MDA); (2) negative association with total precipitation per year; and (3) positive association with precipitation during the dry season. Precisely, regardless of MDA, the increase in total yearly precipitation was suggested to decrease the number of schistosomiasis patients, whereas an increase in precipitation in the dry season increased the number of schistosomiasis patients. This is probably because when total precipitation increases, the water level of the Mekong River rises, thus decreasing the density of infected larvae, cercaria, in the water, and the frequency of humans entering the river would also decrease. In contrast, when precipitation in the dry season is higher, the water level of the Mekong River also rises, which expands the snail habitant, and thus water contact between humans and the snails would also increase. The present study results suggest that increasing precipitation would impact the prevalence of schistosomiasis both positively and negatively, and precipitation should also be considered in the policy to eliminate schistosomiasis mekongi in Lao PDR.

RESUMEN

The aim of this research is to propose a novel methodology that exploits Earth Observation (EO) data to accurately produce high-resolution bioclimatic maps at large spatiotemporal scales. This method directly links EO products (i.e., land surface temperature - LST and Normalized Difference Vegetation Index - NDVI) to air temperature (Tair) and such thermal indices as the Universal Thermal Climate Index (UTCI), and the Physiologically Equivalent Temperature (PET) to produce large-scale high-quality bioclimatic maps at a spatial resolution of 100 m. The proposed methodology is based on Artificial Neural Networks (ANNs), and the bioclimatic maps are developed with the use of Geographical Information Systems. High-resolution LST maps are produced from the spatial downscaling of EO images and the application of the methodology in the case of the island of Cyprus highlights the ability of EO parameters to estimate accurately Tair as well as the above mentioned thermal indices. The results are validated for different conditions and the overall Mean Absolute Error for each case ranges from 1.9 °C for Tair to 2.8 °C for PET and UTCI. The trained ANNs could be used in near real-time for estimating the spatial distribution of outdoor thermal conditions and for assessing the relationship between human health and the outdoor thermal environment. On the basis of the developed bioclimatic maps, high-risk areas were identified. Furthermore, the study examines the relationship between land cover and Tair, UTCI, and PET, and the results provide evidence of the suitability of the method to monitor the dynamics of the urban environment and the effectiveness of urban nature-based solutions. Studies on bioclimate analysis monitor thermal environment, raise awareness and enhance the capacity of national public health systems to respond to thermally-induced health risks.

RESUMEN

The application of radio frequency (RF) vacuum electronics for the betterment of the human condition began soon after the invention of the first vacuum tubes in the 1920s and has not stopped since. Today, microwave vacuum devices are powering important applications in health treatment, material and biological science, wireless communication-terrestrial and space, Earth environment remote sensing, and the promise of safe, reliable, and inexhaustible energy. This article highlights some of the exciting application frontiers of vacuum electronics.

RESUMEN

The data presented in this article are related to the research paper entitled "Observation of night-time emissions of the Earth in the near UV range from the International Space Station with the Mini-EUSO detector" (Remote Sensing of Environment, Volume 284, January 2023, 113336, https://doi.org/10.1016/j.rse.2022.113336). The data have been acquired with the Mini-EUSO detector, an UV telescope operating in the range 290-430 nm and located inside the International Space Station. The detector was launched in August 2019, and it has started operations from the nadir-facing UV-transparent window in the Russian Zvezda module in October 2019. The data presented here refer to 32 sessions acquired between 2019-11-19 and 2021-05-06. The instrument consists of a Fresnel-lens optical system and a focal surface composed of 36 multi-anode photomultiplier tubes, each with 64 channels, for a total of 2304 channels with single photon counting sensitivity. The telescope, with a square field-of-view of 44°, has a spatial resolution on the Earth surface of 6.3 km and saves triggered transient phenomena with a temporal resolution of 2.5 µs and 320 µs. The telescope also operates in continuous acquisition at a 40.96 ms scale. In this article, large-area night-time UV maps obtained processing the 40.96 ms data, taking averages over regions of some specific geographical areas (e.g., Europe, North America) and over the entire globe, are presented. Data are binned into 0.1° × 0.1° or 0.05° × 0.05° cells (depending on the scale of the map) over the Earth's surface. Raw data are made available in the form of tables (latitude, longitude, counts) and .kmz files (containing the .png images). These are - to the best of our knowledge - the highest sensitivity data in this wavelength range and can be of use to various disciplines.

RESUMEN

BACKGROUND: Although malaria transmission has experienced an overall decline in sub-Saharan Africa, urban malaria is now considered an emerging health issue due to rapid and uncontrolled urbanization and the adaptation of vectors to urban environments. Fine-scale hazard and exposure maps are required to support evidence-based policies and targeted interventions, but data-driven predictive spatial modelling is hindered by gaps in epidemiological and entomological data. A knowledge-based geospatial framework is proposed for mapping the heterogeneity of urban malaria hazard and exposure under data scarcity. It builds on proven geospatial methods, implements open-source algorithms, and relies heavily on vector ecology knowledge and the involvement of local experts. METHODS: A workflow for producing fine-scale maps was systematized, and most processing steps were automated. The method was evaluated through its application to the metropolitan area of Dakar, Senegal, where urban transmission has long been confirmed. Urban malaria exposure was defined as the contact risk between adult Anopheles vectors (the hazard) and urban population and accounted for socioeconomic vulnerability by including the dimension of urban deprivation that is reflected in the morphology of the built-up fabric. Larval habitat suitability was mapped through a deductive geospatial approach involving the participation of experts with a strong background in vector ecology and validated with existing geolocated entomological data. Adult vector habitat suitability was derived through a similar process, based on dispersal from suitable breeding site locations. The resulting hazard map was combined with a population density map to generate a gridded urban malaria exposure map at a spatial resolution of 100 m. RESULTS: The identification of key criteria influencing vector habitat suitability, their translation into geospatial layers, and the assessment of their relative importance are major outcomes of the study that can serve as a basis for replication in other sub-Saharan African cities. Quantitative validation of the larval habitat suitability map demonstrates the reliable performance of the deductive approach, and the added value of including local vector ecology experts in the process. The patterns displayed in the hazard and exposure maps reflect the high degree of heterogeneity that exists throughout the city of Dakar and its suburbs, due not only to the influence of environmental factors, but also to urban deprivation. CONCLUSIONS: This study is an effort to bring geospatial research output closer to effective support tools for local stakeholders and decision makers. Its major contributions are the identification of a broad set of criteria related to vector ecology and the systematization of the workflow for producing fine-scale maps. In a context of epidemiological and entomological data scarcity, vector ecology knowledge is key for mapping urban malaria exposure. An application of the framework to Dakar showed its potential in this regard. Fine-grained heterogeneity was revealed by the output maps, and besides the influence of environmental factors, the strong links between urban malaria and deprivation were also highlighted.

Asunto(s)

RESUMEN

Environmental and climatic fluctuations can greatly influence the dynamics of infectious diseases of veterinary concern, or interfere with the implementation of relevant control measures. Including environmental and climatic aspects in epidemiological studies could provide policy makers with new insights to assign resources for measures to prevent or limit the spread of animal diseases, particularly those with zoonotic potential. The ever-increasing number of technologies and tools permits acquiring environmental data from various sources, including ground-based sensors and Satellite Earth Observation (SEO). However, the high heterogeneity of these datasets often requires at least some basic GIS (Geographic Information Systems) and/or coding skills to use them in further analysis. Therefore, the high availability of data does not always correspond to widespread use for research purposes. The development of an integrated data pre-processing system makes it possible to obtain information that could be easily and directly used in subsequent epidemiological analyses, supporting both research activities and the management of disease outbreaks. Indeed, such an approach allows for the reduction of the time spent on searching, downloading, processing and validating environmental data, thereby optimizing available resources and reducing any possible errors directly related to data collection. Although multitudes of free services that allow obtaining SEO data exist nowadays (either raw or pre-processed through a specific coding language), the availability and quality of information can be sub-optimal when dealing with very small scale and local data. In fact, some information sets (e.g., air temperature, rainfall), usually derived from ground-based sensors (e.g., agro-meteo station), are managed, processed and redistributed by agencies operating on a local scale which are often not directly accessible by the most common free SEO services (e.g., Google Earth Engine). The EVE (Environmental data for Veterinary Epidemiology) system has been developed to acquire, pre-process and archive a set of environmental information at various scales, in order to facilitate and speed up access by epidemiologists, researchers and decision-makers, also accounting for the integration of SEO information with locally sensed data.

RESUMEN

A three-dimensional electrical conductivity model of the mantle beneath South China is presented using the geomagnetic depth sounding method in this paper. The data misfit term in the inversion function is measured by the L1-norm to suppress the instability caused by large noises contained in the observed data. To properly correct the ocean effect in responses at coastal observatories, a high-resolution (1° × 1°) heterogeneous and fixed shell is included in inversion. The most striking feature of the obtained model is a continuous high-conductivity anomaly that is centered on ~(112° E, 27° N) in the mantle. The average conductivity of the anomaly appears to be two to four times higher than that of the global average models at the most sensitive depths (410-900 km) of geomagnetic depth sounding. Further analysis combining laboratory-measured conductivity models with the observed conductivity model shows that the anomaly implies excess temperature in the mantle. This suggests the existence of a mantle plume, corresponding to the Hainan plume, that originates in the lower mantle, passes through the mantle transition zone, and enters the upper mantle. Our electrical conductivity model provides convincing evidence for the mantle plume beneath South China.

RESUMEN

Today's enormous amounts of freely available high-resolution satellite imagery provide the demand for effective preprocessing methods. One such preprocessing method needed in many applications utilizing optical satellite imagery from the Landsat and Sentinel-2 archives is mosaicking. Merging hundreds of single scenes into a single satellite data mosaic before conducting analysis such as land cover classification, change detection, or modelling is often a prerequisite. Maintaining the original data structure and preserving metadata for further modelling or classification would be advantageous for many applications. Furthermore, in other applications, e.g., connected to land cover classification creating the mosaic for a specific period matching the phenological state of the phenomena in nature would be beneficial. In addition, supporting in-house and computing centers not directly connected to a specific cloud provider could be a requirement for some institutions or companies. In the current work, we present a method called Geomosaic that meets these criteria and produces analysis-ready satellite data mosaics from Landsat and Sentinel-2 imagery.•The method described produces analysis-ready satellite data mosaics.•The satellite data mosaics contain pixel metadata usable for further analysis.•The algorithm is available as an open-source tool coded in Python and can be used on multiple platforms.