RESUMEN

BACKGROUND: The value of dental radiographs to oral health care decision making must be balanced with radiation safety to minimize patient exposure and occupational risk of oral health care providers. This review summarizes recommendations and regulatory guidance regarding dental radiography and cone-beam computed tomography. An expert panel presents recommendations on radiation safety, appropriate imaging practices, and reducing radiation exposure. TYPES OF STUDIES REVIEWED: A systematic search run in Ovid MEDLINE, Embase, and Cochrane Database of Systematic Reviews identified relevant topical systematic reviews, organizational guidelines, and regulatory reviews published in the peer-reviewed literature since 2010. A supplemental search of the gray literature (eg, technical reports, standards, and regulations) identified topical nonindexed publications. Inclusion criteria required relevance to primary oral health care (ie, general or pediatric dentistry). RESULTS: A total of 95 articles, guidance documents, and regulations met the inclusion criteria. Resources were characterized as applicable to all modalities, operator and occupational protection, dose reduction and optimization, and quality assurance and control. PRACTICAL IMPLICATIONS: Understanding factors affecting imaging safety and applying fundamental principles of radiation protection consistent with federal, state, and local requirements are essential for limiting patient ionizing radiation exposure, in conjunction with implementing optimal imaging procedures to support prudent use of dental radiographs and cone-beam computed tomographic imaging. The regulatory guidance and best practice recommendations summarized in this article should be followed by dentists and other oral health care providers.

Asunto(s)

RESUMEN

Background Preoperative templating aids the surgeon in estimating implant size and placement. Calibration markers are used to set the correct magnification of digital images before templating. Improper marker placement or complete absence can lead to inaccuracy or an inability to calibrate images altogether. Aims This study describes a method for calibrating images using a patient's femoral head size (FHS) predicted using demographics and anthropometric data. Materials and methods A formula predicting the FHS was derived from a cohort of 507 patients who underwent hemiarthroplasty for an intracapsular fractured neck of the femur through multivariate regression analysis. A separate validation cohort (n=50) who had undergone total hip arthroplasty (THA) had postoperative radiographs calibrated using the predicted FHS and the native contralateral hip as a surrogate calibration marker. The THA femoral head implant size was subsequently measured and compared with the actual implant size selected intraoperatively. Measurements were performed by two independent assessors to determine intra- and interobserver reliability. Results Multivariate regression analyses showed four variables significantly correlated with the size of the femoral head: gender (p < 0.001), height (p < 0.001), weight (p < 0.001), and race (Asian) (p = 0.01). Using these, a regression model to predict the FHS was obtained with an R2 value of 0.65 and a standard error of 2.18 mm. The validation cohort showed that THA head implant size could be accurately measured with an average root-mean-squared error (RMSE) of 1.41 mm (SD = 0.97 mm; %RMSE = 4.7%). The implant head size was measured to be within 5%, 10%, and 15% RMSE in 57.5%, 93.0%, and 100.0% of cases, respectively. There was excellent intraobserver (R2 = 0.94 and 0.95) and interobserver (R2 = 0.94) reliability. Conclusions The novel method proposed and validated in this study, using a predicted FHS to calibrate digital images, provides an alternative means of templating THA for fractured neck of the femur patients, in whom external calibration markers are often absent.

RESUMEN

BACKGROUND: Digital radiography is the most commonly utilized medical imaging technique worldwide, and the quality of radiographs plays a crucial role in accurate disease diagnosis. Therefore, evaluating the quality of radiographs is an essential step in medical examinations. However, manual evaluation can be time-consuming, labor-intensive, and prone to interobserver differences, making it less reliable. PURPOSE: To alleviate the workload of radiographic technologists and enhance the efficiency of radiograph quality evaluation, it is crucial to develop rapid and reliable quality evaluation methods and establish a set of quantitative evaluation standards. To address this, we have proposed a quality evaluation system for digital radiographs that utilizes deep learning techniques to achieve fast and precise evaluation. METHODS: The evaluation of frontal chest radiograph quality involves assessing patient positioning through semantic segmentation and foreign body detection. For lung, scapula, and clavicle segmentation in digital chest radiographs, a residual connection-based convolutional neural network π-ResUNet, was proposed. Criteria for patient positioning evaluation were established based on the segmentation and manual evaluation results. A convolutional neural network, FasterRCNN, was utilized to detect and localize foreign bodies in digital chest radiographs. To enhance the performance of both neural networks, a semi-supervised learning (SSL) strategy was implemented by incorporating a consistency loss that leverages a large number of unlabeled digital radiographs. We also trained the network using the fully supervised learning (FSL) strategy and compared their performance on the test set. The ChestXRay-14 and object-CXR datasets were used throughout the process. RESULTS: By comparing with the manual annotation, the proposed network, trained using the SSL method, achieved a high Dice similarity coefficient (DSC) of 0.96, 0.88, and 0.88 for lung, scapula, and clavicle segmentation, respectively, outperforming the network trained with the FSL method. In addition, for foreign body detection, the proposed SSL method was superior to the FSL method, achieving an AUC (Area under receiver operating characteristic curve, Area under ROC curve) of 0.90 and an FROC (Free-response ROC) of 0.77 on the test dataset. CONCLUSIONS: The experimental results show that our proposed system is well-suited for radiograph quality evaluation, with the semi-supervised learning method further improving the network's performance. The proposed method can evaluate the quality of a chest radiograph from two aspects-patient positioning and foreign body detection-within 1 s, offering a promising tool in radiograph quality evaluation.

Asunto(s)

RESUMEN

AIM: To evaluate the residual alveolar ridge bone height changes regarding the impact of the block-out spacer used during the pick-up procedures of implant-assisted mandibular complete overdentures. MATERIALS AND METHODS: This study was a randomized clinical trial conducted on 18 patients. All patients received three mandibular dental implants with definitive locator attachments which were directly picked up with two different techniques. Patients were classified randomly without any bias into two equal groups (Group I block-out spacer) and (Group II without block-out spacer). Over a year, the digital radiographic technique with new technique of reference points was employed to evaluate the changes in the residual alveolar ridge bone heights. The data were statistically analyzed to test the significance difference between groups. RESULTS: Concerning the residual alveolar ridge resorption RRR, group I exhibited a significantly higher RRR than group II. CONCLUSION: In terms of residual alveolar ridge preservation, not using the block-out spacer was more beneficial than using it. CLINICAL SIGNIFICANCE: Alveolar bone heights can be affected by the use of block-out spacer during pick-up procedure within accepted physiologic values. The removal of the block-out spacer could be more beneficial with respect to the preservation of the residual alveolar ridge. How to cite this article: Mohammed REL, Askar OM, El-Waseef FAE, et al. Radiographic Assessment of Three-implant-retained Mandibular Overdentures: A Clinical Study of Alveolar Bone Height Changes (Randomized Clinical Trial). J Contemp Dent Pract 2023;24(11):847-852.

Asunto(s)

RESUMEN

BACKGROUND: The diagnosis of dental implants and the periapical tissues using periapical radiographs is crucial. Recently, artificial intelligence has shown a rapid advancement in the field of radiographic imaging. PURPOSE: This study attempted to detect dental implants and peri-implant tissues by using a deep learning method known as object detection on the implant image of periapical radiographs. METHODS: After implant treatment, the periapical images were collected and data were processed by labeling the dental implant and peri-implant tissue together in the images. Next, 300 images of the periapical radiographs were split into 80:20 ratio (i.e. 80% of the data were used for training the model while 20% were used for testing the model). These were evaluated using an object detection model known as Faster R-CNN, which simultaneously performs classification and localization. This model was evaluated on the classification performance using metrics, including precision, recall, and F1 score. Additionally, in order to assess the localization performance, an evaluation through intersection over union (IoU) was utilized, and, Average Precision (AP) was used to assess both the classification and localization performance. RESULTS: Considering the classification performance, precision = 0.977, recall = 0.992, and F1 score = 0.984 were derived. The indicator of localization was derived as mean IoU = 0.907. On the other hand, considering the indicators of both classification and localization performance, AP showed an object detection level of AP@0.5 = 0.996 and AP@0.75 = 0.967. CONCLUSION: Thus, the implementation of Faster R-CNN model for object detection on 300 periapical radiographic images including dental implants, resulted in high-quality object detection for dental implants and peri-implant tissues.

Asunto(s)

RESUMEN

Abstract Introduction Fishbone foreign body retention is one of the most common problem with various clinical manifestations from asymptomatic, abscess formation, and perforation to mediastinitis with subsequence morbidity and mortality. Accurately identifying the location of the fishbone leads to precise removal, which, in turn, prevents serious consequences. Digital radiographs have been widely used for diagnosis, but many studies show poor sensitivity. Object The present study was designed to compare the diagnostic performances of digital radiograph and low-dose computed tomography (CT) for fishbone retention and to demonstrate the radiation dose of the two modalities. Methods We collected 2 pieces of fishbone from each of the 15 species commonly eaten in Southeast Asia. We embedded each fishbone in a fresh pig's neck, then subjected the pig's neck to lateral soft tissue neck digital radiograph. The locations to embed included tonsil, base of tongue, and upper esophagus. Then, we subjected the same specimen to a CT scan. Two experienced radiologists interpreted each image. Results Visibility in the digital radiograph group was 13%, and in CT images group, it was 87% regardless of the locations. The average radiation dose from digital radiographs was 0.4 mGy (radiation dose field), while from CT images it was 8.6 mGy (CT dose index). Conclusion Most of the common fishbones in Southeast Asia could not be visualized by digital radiograph when embedded in the neck. Computed tomography scans demonstrated better diagnostic performance of fishbone retention compared to digital radiographs, regardless of the embedded location.

RESUMEN

Introduction Fishbone foreign body retention is one of the most common problem with various clinical manifestations from asymptomatic, abscess formation, and perforation to mediastinitis with subsequence morbidity and mortality. Accurately identifying the location of the fishbone leads to precise removal, which, in turn, prevents serious consequences. Digital radiographs have been widely used for diagnosis, but many studies show poor sensitivity. Object The present study was designed to compare the diagnostic performances of digital radiograph and low-dose computed tomography (CT) for fishbone retention and to demonstrate the radiation dose of the two modalities. Methods We collected 2 pieces of fishbone from each of the 15 species commonly eaten in Southeast Asia. We embedded each fishbone in a fresh pig's neck, then subjected the pig's neck to lateral soft tissue neck digital radiograph. The locations to embed included tonsil, base of tongue, and upper esophagus. Then, we subjected the same specimen to a CT scan. Two experienced radiologists interpreted each image. Results Visibility in the digital radiograph group was 13%, and in CT images group, it was 87% regardless of the locations. The average radiation dose from digital radiographs was 0.4 mGy (radiation dose field), while from CT images it was 8.6 mGy (CT dose index). Conclusion Most of the common fishbones in Southeast Asia could not be visualized by digital radiograph when embedded in the neck. Computed tomography scans demonstrated better diagnostic performance of fishbone retention compared to digital radiographs, regardless of the embedded location.

RESUMEN

Purpose Precise knowledge about clinically observed bony orbital aging is needed for surgical planning for acceptable cosmetic results. The effect of age and gender on the facial skeleton and orbital aperture has been appreciated earlier, but its quantification remains ignored. The purpose of this study was to evaluate age- and sex-related changes in the shape of the orbital aperture and construct a reference data set for the aging phenomenon in Indians. Methods Two hundred digital radiographs (Water's/frontal view) of the skull, obtained for various reasons, were evaluated. The radiographs comprised 107 males and 93 females aged between 10 and 60 years (10-59 years). Orbital shape, height/width, and interorbital/biorbital distances were noted, and orbital indices (OIs) were calculated. Orbital parameters thus obtained were compared between right and left sides and males and females. The relation of the parameters with age and gender was analyzed. Results Four types of orbits, round (33.5%), elliptical (30.5%), rectangular (27.5%), and square (9.5%), were noted in the study population. The average value of height and width of the right orbit was found to be higher than that of the left (p > 0.05). Male patients had higher (p > 0.05) and wider (p > 0.05) orbits than females. The right OI (81.55 ± 5.30) was higher than the left (80.75 ± 4.80) (p > 0.05). When comparatively evaluated between gender, both orbits were found to be of the microseme type with a mere difference (p > 0.05). The average interorbital/biorbital distance was 1.27 ± 2.11 and 9.78 ± 4.40 cm, respectively, without any gender difference. No significant relation was found between the age change and the parameters defined (p > 0.05), except in one age group (10-19 years). Conclusions Orbital dimensions showed no association with age and gender except in one age group (10-19 years); a pubertal growth spurt in females might be causing this phenomenon. The morphometric data may be useful in forensic anthropology and better planning for reconstructive surgeries in the orbito-maxillary region.

RESUMEN

PURPOSE: Acetate templates were commonly used for templating for total hip arthroplasty. With digital radiographs having replaced conventional analogue radiographs, newer techniques are required. We describe a method for templating images of digital radiographs using conventional acetate templates, which is independent of a magnification marker or PACS system. METHODS: Fifty-one patients (64 hips) who were treated with primary THA were prospectively evaluated. Templating was done by keeping the acetate template directly over the digital image of the radiograph on a liquid crystal display (LCD) monitor, after calibrating the linear scale generated by the digital radiography machine. The size of prosthesis predicted on this templating technique was compared with the actual sizes used during the surgery. Inter-observer and intra-observer reliabilities were assessed. Our calibration method was further validated by comparing the size of the cup calculated on postoperative radiograph using digital templating software (mediCAD Hectec GmbH) and the actual size used during surgery. RESULTS: Accurate size was predicted for 36.7% of the acetabular cup and 35.9% of femoral stems. The accuracy within ± one size was 89.9% for acetabular cups and 91.4% for femoral stems. Excellent inter-observer and intra-observer reliability were seen for both femoral and acetabular components. CONCLUSION: The method described provides an accurate, reproducible, convenient and low-cost technique of preoperative templating. It combines the ease of using acetate templates with the convenience of being able to use digital images, without the need for expensive software.

RESUMEN

BACKGROUND: External calibration markers (ECM) are the standard of care for digital templating in joint replacements. Spherical mono markers are known to be unreliable. Fixed calibration factors (FCF) can reduce the overall error by placement of markers, but do not address individual patient anatomy. Dual scale calibration marker (DSCM) methods were developed to improve precision of calibration but require two markers. This prospective observational study is the first to analyse the application of a dual scale type single marker (DSSM) method in supine radiographs. METHODS: One hundred patients with unilateral total hip arthroplasty (THA) underwent anterior-posterior pelvis X-ray with ECM and DSSM. The femoral THA head components were used as internal reference (ICM). An empirical fixed calibration factor (FCF; 120%) was used as comparator. Absolute differences of ICM and both ECM and DSSM were calculated. Absolute relative deviations (ARD) were calculated. RESULTS: Mean absolute calibration factor differences of ECM, FCF and DSSM from ICM were 0.105 (0.002-0.182), 0.016 (0.082-0.013) and 0.011 (0.056-0.009), respectively. ARD differences between ECM and DSSM as well as FCF and DSSM were significant (p < 0.001). CONCLUSION: The DSSM method showed superior results over ECM and FCF to predict the optimal calibration factor in supine radiographs. The novel DSSM method could be used to improve digital templating in supine radiographs without need for additional markers.

Asunto(s)

RESUMEN

AIM: Pulpectomy in the primary tooth has unique challenges due to morphological variations in root pattern and physiological root resorption. The electronic apex locator (EAL) is one of the recent methods to determine the estimation of working length without much radiation exposure to the patient as well as the operator. The present study was undertaken for evaluating and comparing the efficacy of EAL, conventional radiography, digital radiography, and actual visual method for the estimation of in the root canal working length (RCL) in extracted primary teeth. MATERIALS AND METHODS: Ninety extracted, single-rooted primary teeth were selected. Working length estimation was done with an EAL, conventional, and digital radiographic method, and compared it with an actual visual method. RESULTS: Accuracy of EAL was observed to be 99.7% followed by digital radiograph (98.1%) and conventional radiograph (96.1%). Both EAL and digital radiographic methods showed a high correlation as compared to conventional. The comparative efficacy of an EAL with a visual method was found to be statistically non-significant (p > 0.005). CONCLUSION: Root canal working length determined through the electronic method was found to be an accurate and effective tool in single-rooted primary teeth and can be indicated for clinical implementation in endodontic treatment of primary teeth. HOW TO CITE THIS ARTICLE: Sahni A, Kapoor R, Gandhi K, et al. A Comparative Evaluation of Efficacy of Electronic Apex Locator, Digital Radiography, and Conventional Radiographic Method for Root Canal Working Length Determination in Primary Teeth: An In Vitro Study. Int J Clin Pediatr Dent 2020;13(5):523-528.

RESUMEN

OBJECTIVES: : We compared apical transportation in the WaveOne and ProTaper Next systems, which are rotary nickel-titanium systems with reciprocating and continuous rotation movements, respectively, using manual measurements obtained from resin blocks with simulated root canals and double digital radiographs of extracted teeth. MATERIALS AND METHODS: : We used 30 resin blocks with simulated root canals and 30 extracted teeth for this study. The same endodontist performed root canal shaping using the WaveOne or ProTaper Next system. We assessed apical transportation by measuring the amounts (in mm) of material lost 1 mm from the apical foramen in the resin blocks and by using double digital radiography for the extracted teeth. Significant differences between groups were assessed using t-tests. P < 0.05 was considered statistically significant. RESULTS: : The amount of apical transportation differed significantly between the two systems when resin blocks were used for assessment (P < 0.05), but there were no significant differences when extracted teeth were used (P < 0.05). CONCLUSIONS: In the current study, there was no significant difference in apical transportation between natural teeth prepared using WaveOne and those prepared using ProTaper Next. However, significant differences were observed between the two systems with resin blocks. These findings indicate that the use of resin blocks is not an accurate method for apical transportation evaluation.

Asunto(s)

RESUMEN

AIM: Compare the measurement of working length with three different methods manual tactile sensation, digital radiography and Mutidetector computed tomography(MDCT). MATERIALS AND METHOD: 40 human premolar extracted for orthodontic purpose were selected. Teeth were store in sodium chloride (0.9%) during the study. Access cavity was prepared and canal patency was seen with no 10 file in each tooth. Manually no 15 K file was inserted from access cavity until the tip was visible at the foramen, a silicon stopper was adjusted to the corresponding buccal cusp tip and the root canal length was measured. After that in each tooth with no-15 K file inserted from access cavity with stop at tip of buccal cusp until tip appear at foramen and x-ray was taken with digital radiograph (RVG,Satelac) and canal length was measured. After that all teeth are mounted in wax block,MDCT scan was done and in the scan images of teeth, root canal length is measured from buccal cusp tip to root end. After taking measurement of working length with all three methods and the data was stastically analyzed with One Way Analysis of variance (ANOVA) followed by Turkey's Test. RESULTS: ANOVA and turkeys test showed that there was no significant difference in the measurements by the three procedures (p>0.05). CONCLUSION: Working length measurement with MDCT scan and other two conventional methods does not show significant difference in measurement. Use of newer 3D imaging technique is useful in root canal treatment for measuring working length.

RESUMEN

BACKGROUND: The accuracy of preoperative templating with respect to leg length, femoral offset, and the size of femoral and acetabular components is essential to the success of total hip arthroplasty (THA). Traditionally, templating has been performed using printed film with acetate templates. However, preoperative templating designed by different prosthetic manufacturers cannot be used directly on the film due to varying acetate template amplification ratios. Computer-based templating needs specialized digital templating software, which has cost implications. To address these shortcomings, we bring forward several questions: (1) the accuracy of traditional manual templating combined with the calibrated digital radiograph for preoperative templating, (2) the inter- and intraobserver reliability of this method. HYPOTHESIS: Using calibrated digital radiograph with traditional manual templating improves the accuracy and reproducibility of preoperative templating for THA. PATIENTS AND METHODS: We designed a stepwise method that combines the traditional manual templating with standing digital radiograph calibrated by a scaling ball. Two separate observers (XJL, QYG) analyzed data of 82 patients (109 THAs) who had undergone THA with preoperative templating using the calibrated digital templating. The intra- and interobserver reliability was assessed by intraclass correlation coefficient. RESULTS: The size of the acetate template acetabular based on our method was identical to the actual implanted acetabular size in 55.0% (XJL 110/218 [50.5%]; QYG 130/218 [59.6%]) of the cases indicating moderate accuracy. The intraclass correlation coefficient (ICC) for acetabular templating indicated almost perfect interobserver (ICC=0.918 [95% CI, 0.893-0.937]) and intraobserver agreement (ICC=0.932 [95% CI, 0.912-0.947]). While the exact implanted femoral size was predicted in 55.3% (XJL 122/218 [56.0%]; QYG 119/218 [54.6%]) of the cases. The ICC for femoral component templating indicated almost perfect interobserver (ICC=0.944 [95% CI, 0.927-0.957]) and intraobserver agreement (ICC=0.909 [95% CI, 0.883-0.930]). DISCUSSION: This new stepwise method may prove to be a more reliable preoperative design choice to accurately calibrate magnification with radiograph, and could solve the incompatibility of the preoperative template designed by different prosthetic companies for direct use with the x-ray film. The method described is practical, convenient, cost-effective and does not require specialized equipment or software, thus making it particularly suitable for use in underdeveloped settings. LEVEL OF EVIDENCE: Level IV, case series without controls.

Asunto(s)

RESUMEN

AIM: The aim of the study was to evaluate the effect of Low-Level Laser Therapy (LLLT) on bone formation in cystic defects following cyst enucleation. PATIENTS AND METHODS: The sample was composed of sixteen patients with enucleated maxillary bony cystic lesions. With an age range from 20 - 44 grouped as eight Laser and eight Control patients. Laser group was subjected to low intensity diode laser immediately after surgery and then for three times per week for two weeks using a therapeutic laser irradiation. Group B (control group): patients were not subjected laser therapy. RESULTS: The predictor variable was exposure of bone defect to LLLT or none. The outcome variable was bone density changes measured by digital radiographs at day 1 and days 90 postoperatively. Descriptive and bivariate statistics were computed. There were no statistically significant differences between the 2 groups for the bone density at day 1. There was a statistically significant difference in bone density changes in each group at day 90: Significant at P ≤ 0.05. After adjusting for differences in day 1 for bone density, the estimated mean change in bone density changes at day 90 was significantly larger for Laser compared with control. CONCLUSION: The results of this study suggested that LLLT can enhance bone healing in maxillary cystic defects. This can serve as an adjunct method in preventing possible delayed healing and pathological fractures This also will be helpful for more researchers in early loading in case of dental implants to accelerate osseointegration.

RESUMEN

ABSTRACT Objective: The aim of this study was to compare the equivalent and effective doses of different digital radiographic methods (panoramic, lateral cephalometric and periapical) with cone-beam computed tomography (CBCT). Methods: Precalibrated thermoluminescent dosimeters were placed at 24 locations in an anthropomorphic phantom (Alderson Rando Phantom, Alderson Research Laboratories, New York, NY, USA), representing a medium sized adult. The following devices were tested: Heliodent Plus (Sirona Dental Systems, Bernsheim, Germany), Orthophos XG 5 (Sirona Dental Systems, Bernsheim, Germany) and i-CAT (Imaging Sciences International, Hatfield, PA, USA). The equivalent doses and effective doses were calculated considering the recommendations of the International Commission of Radiological Protection (ICRP) issued in 1990 and 2007. Results: Although the effective dose of the radiographic set corresponded to 17.5% (ICRP 1990) and 47.2% (ICRP 2007) of the CBCT dose, the equivalent doses of skin, bone surface and muscle obtained by the radiographic set were higher when compared to CBCT. However, in some areas, the radiation produced by the orthodontic set was higher due to the complete periapical examination. Conclusion: Considering the optimization principle of radiation protection, i-CAT tomography should be used only in specific and justified circumstances. Additionally, following the ALARA principle, single periapical radiographies covering restricted areas are more suitable than the complete periapical examination.

RESUMO Objetivo: o objetivo deste estudo foi comparar as doses equivalentes e efetivas absorvidas pelo mesmo receptor, quando exposto a diferentes exames radiográficos digitais (panorâmica, telerradiografia lateral e periapicais) e à tomografia computadorizada de feixe cônico (TCFC). Métodos: dosímetros termoluminescentes pré-calibrados foram colocados em 24 locais em um phantom antropomórfico (Alderson Rando Phantom, Laboratórios de Pesquisas de Alderson, New York, NY, EUA), o que representa um adulto de tamanho médio. Os seguintes equipamentos foram avaliados: Heliodent Plus (Sirona Dental Systems, Bernsheim, Alemanha), Orthophos XG 5 (Sirona Dental Systems, Bernsheim, Alemanha) e i-CAT (Imaging Sciences International, Hatfield, PA, EUA). As doses equivalentes e as doses efetivas foram calculadas tendo-se em conta as recomendações da Comissão Internacional de Proteção Radiológica (International Commission on Radiological Protection, ICRP), publicadas em 1990 e 2007. Resultados: embora a dose eficaz do set radiográfico tenha correspondido a 17,5% (ICRP 1990) e 47,2% (ICRP 2007) da dose da TCFC, as doses equivalentes na pele e superfícies ósseas e musculares desse set foram maiores, quando comparadas às da TCFC. Em algumas áreas, a radiação produzida pelo set de radiografias foi maior, devido à radiação do exame periapical completo. Conclusão: considerando-se o princípio da otimização da proteção radiológica, a tomografia computadorizada adquirida no tomógrafo i-CAT deve ser usada apenas em circunstâncias específicas e justificadas. Além disso, seguindo o princípio ALARA, radiografias periapicais unitárias de áreas pré-selecionadas são mais apropriadas do que o exame periapical completo.

Asunto(s)

RESUMEN

BACKGROUND: The relationship between impacted mandibular third molar and mandibular canal is important for removal of this tooth. Panoramic radiography is one of the commonly used diagnostic tools for evaluating the relationship of these two structures. OBJECTIVES: To evaluate the accuracy of panoramic radiographic findings in predicting direct contact between mandibular canal and impacted third molars on 3D digital images, and to define panoramic criterion in predicting direct contact between the two structures. METHODS: Two observers examined panoramic radiographs of 178 patients (256 impacted mandibular third molars). Panoramic findings of interruption of mandibular canal wall, isolated or with darkening of third molar root, diversion of mandibular canal and narrowing of third molar root were evaluated for 3D digital radiography. Direct contact between mandibular canal and impacted third molars on 3D digital images was then correlated with panoramic findings. Panoramic criterion was also defined in predicting direct contact between the two structures. RESULTS: Panoramic findings of interruption of mandibular canal wall, isolated or with darkening of third molar root were statistically significantly correlated with direct contact between mandibular canal and impacted third molars on 3D digital images (p < 0.005), and were defined as panoramic criteria in predicting direct contact between the two structures. CONCLUSION: Interruption of mandibular canal wall, isolated or with darkening of third molar root observed on panoramic radiographs were effective in predicting direct contact between mandibular canal and impacted third molars on 3D digital images. Panoramic radiography is one of the efficient diagnostic tools for pre-operative assessment of impacted mandibular third molars.

RESUMEN

BACKGROUND: There is limited evidence on the crestal bone level changes around implants placed in bone augmented by guided bone regeneration (GBR) during submerged healing. The purpose of this study was to prospectively compare radiographic crestal bone changes around implants placed in augmented bone with changes around implants placed in pristine bone. MATERIALS AND METHODS: Patients receiving dental implants in the augmented or pristine mandibular posterior edentulous ridge were included in the study. The digital standardized radiographs from the implant placement procedure were compared to the radiographs from the second-stage procedure to evaluate the peri-implant marginal bone level changes. The soft tissue thickness (ST), width of keratinized mucosa (wKM), and early cover screw exposure (eIE) were measured at the time of the second-stage procedure. RESULTS: A total of 29 implants in 26 patients, 11 in augmented bone (test group) and 18 in pristine bone (control group), were analyzed. The mean peri-implant bone loss (ΔBL) was 0.74 ± 0.74 mm (mean ± SD) in the test group and 0.25 ± 0.55 mm (mean ± SD) in the control group. The differences between the test and control groups in the mesial, distal, and mean peri-implant crestal bone level changes were statistically significant (P = 0.009, P = 0.004, and P = 0.001, respectively). The confounding factors (ST, wKM, and eIE) were adjusted. CONCLUSIONS: More peri-implant crestal bone loss during the submerged healing period was observed in augmented bone than in pristine bone. Augmented bone may not exhibit the same characteristics as pristine bone during the implant submerged healing period.

Asunto(s)

RESUMEN

INTRODUCTION: The aim of this study was to evaluate observer variations and observer reproducibility in the interpretation of periapical health using the Strindberg system, the periapical index (PAI), and the probability index for radiologic assessment of periapical health. METHODS: Four observers read digital periapical images to evaluate the periapical health of 200 root-filled teeth. Each observer evaluated a tooth twice by using the Strindberg system, twice by using the PAI, and twice by using the probability index. Each observation session was held at 1-month intervals. Three scores were used for the evaluations conducted by using the Strindberg system. Both the PAI and the probability index were considered on 5-point scales and were also dichotomized. SPSS for Windows 15.0 software (SPSS Inc, Chicago, IL) was used for data analysis, and intra- and interobserver agreements were described by using kappa statistics. RESULTS: The average kappa values of intra- and interobserver agreement calculated for the Strindberg system were 0.53 and 0.36, respectively. The corresponding average kappa values were calculated as 0.48 and 0.39 for the PAI and 0.45 and 0.30 for the probability index. The highest mean proportion values of intra- and interobserver agreement were observed for the dichotomization of the PAI (88.9% and 87.0%, respectively) followed by the dichotomization of the probability index (86.8% and 82.9%, respectively). CONCLUSIONS: The Strindberg system has lower intraobserver variation compared with the PAI and the probability index, whereas PAI has lower interobserver variation compared with the Strindberg system and the probability index. The dichotomization of the PAI and the probability index provided higher intra- and interobserver agreement values in the radiologic assessment of periapical health.

Asunto(s)

RESUMEN

BACKGROUND: This study was aimed to compare the diagnostic accuracy and feasibility of cone beam computed tomography (CBCT) with phosphor storage plate (PSP) in detection of simulated occlusal secondary caries. MATERIALS AND METHODS: In this in vitro descriptive-comparative study, a total of 80 slots of class I cavities were prepared on 80 extracted human premolars. Then, 40 teeth were randomly selected out of this sample and artificial carious lesions were created on these teeth by a round diamond bur no. 1/2. All 80 teeth were restored with amalgam fillings and radiographs were taken, both with PSP system and CBCT. All images were evaluated by three calibrated observers. The area under the receiver operating characteristic curve was used to compare the diagnostic accuracy of two systems. SPSS (SPSS Inc., Chicago, IL, USA) was adopted for statistical analysis. The difference between Az value of bitewing and CBCT methods were compared by pairwise comparison method. The inter- and intra-operator agreement was assessed by kappa analysis (P < 0.05). RESULTS: The mean Az value for bitewings and CBCT was 0.903 and 0.994, respectively. Significant differences were found between PSP and CBCT (P = 0.010). The kappa value for inter-observer agreement was 0.68 and 0.76 for PSP and CBCT, respectively. The kappa value for intra-observer agreement was 0.698 (observer 1, P = 0.000), 0.766 (observer 2, P = 0.000) and 0.716 (observer 3, P = 0.000) in PSP method, and 0.816 (observer 1, P = 0.000), 0.653 (observer 2, P = 0.000) and 0.744 (observer 3, P = 0.000) in CBCT method. CONCLUSION: This in vitro study, with a limited number of samples, showed that the New Tom VGI Flex CBCT system was more accurate than the PSP in detecting the simulated small secondary occlusal caries under amalgam restoration.