RESUMEN

In this work, the industrial Saccharomyces cerevisiae PE-2 strain, presenting innate capacity for xylitol accumulation, was engineered for xylitol production by overexpression of the endogenous GRE3 gene and expression of different xylose reductases from Pichia stipitis. The best-performing GRE3-overexpressing strain was capable to produce 148.5 g/L of xylitol from high xylose-containing media, with a 0.95 g/g yield, and maintained close to maximum theoretical yields (0.89 g/g) when tested in non-detoxified corn cob hydrolysates. Furthermore, a successful integrated strategy was developed for the production of xylitol from whole slurry corn cob in a presaccharification and simultaneous saccharification and fermentation process (15% solid loading and 36 FPU) reaching xylitol yield of 0.93 g/g and a productivity of 0.54 g/L·h. This novel approach results in an intensified valorization of lignocellulosic biomass for xylitol production in a fully integrated process and represents an advance towards a circular economy.

Asunto(s)

RESUMEN

This study reports an industrially applicable non-sterile xylitol fermentation process to produce xylitol from a low-cost feedstock like corn cob hydrolysate as pentose source without any detoxification. Different immobilization matrices/mediums (alginate, polyvinyl alcohol, agarose gel, polyacrylamide, gelatin, and κ-carrageenan) were studied to immobilize Candida tropicalis NCIM 3123 cells for xylitol production. Amongst this calcium alginate, immobilized cells produced maximum amount of xylitol with titer of 11.1 g/L and yield of 0.34 g/g. Hence, the process for immobilization using calcium alginate beads was optimized using a statistical method with sodium alginate (20, 30 and 40 g/L), calcium chloride (10, 20 and 30 g/L) and number of freezing-thawing cycles (2, 3 and 4) as the parameters. Using optimized conditions (calcium chloride 10 g/L, sodium alginate 20 g/L and 4 number of freezing-thawing cycles) for immobilization, xylitol production increased significantly to 41.0 g/L (4 times the initial production) with corn cob hydrolysate as sole carbon source and urea as minimal nutrient source. Reuse of immobilized biomass showed sustained xylitol production even after five cycles.

RESUMEN

Xylitol production was compared in fed batch fermentation by Saccharomyces cerevisiae strains overexpressing xylose reductase (XR) genes from Candida tropicalis, Pichia stipitis, Neurospora crassa, and an endogenous gene GRE3. The gene encoding a xylose specific transporter (SUT1) from P. stipitis was cloned to improve xylose transport and fed batch fermentation was used with glucose as a cosubstrate to regenerate NADPH. Xylitol yield was near theoretical for all the strains in fed batch fermentation. The highest volumetric (0.28 gL-1 h-1) and specific (34 mgg-1 h-1) xylitol productivities were obtained by the strain overexpressing GRE3 gene, while the control strain showed 7.2 mgg-1 h-1 specific productivity. The recombinant strains carrying XR from C. tropicalis, P. stipitis, and N. crassa produced xylitol with lower specific productivity of 14.3, 6.8, and 6.3 mgg-1 h-1, respectively, than GRE3 overexpressing strain. The glucose fed as cosubstrate was converted to biomass and ethanol, while xylose was only converted to xylitol. The efficiency of ethanol production was in the range of 38-45 % of the theoretical maximum for all the strains. Xylitol production from the non-detoxified corncob hemicellulosic hydrolysate by recombinant S. cerevisiae was reported for the first time. Xylitol productivity was found to be equivalent in the synthetic xylose as well as hemicellulosic hydrolysate-based media showing no inhibition on the S. cerevisiae due to the inhibitors present in the hydrolysate. A systematic evaluation of heterologous XRs and endogenous GRE3 genes was performed, and the strain overexpressing the endogenous GRE3 gene showed the best xylitol productivity.