RESUMEN

PURPOSE: This cone-beam computed tomography (CBCT) study aimed to analyze the anatomical characteristics of alveolar bone at mandibular first molar (MFM) and their implications for immediate implant placement surgery. MATERIALS AND METHODS: 100 patients with 140 MFMs were reviewed retrospectively. We first performed a 3D reconstruction of the patient's CBCT data to determine a reference plane with ideal implant placement and orientation. The following parameters of MFM region were analyzed: mesial-distal socket size (MD-SS), buccal-lingual socket size (BL-SS), root furcation fornix to inferior alveolar nerve (IAN) distance (RF-I), interradicular bone thickness (IRB), mesial/distal root apex to the IAN distance (MRA-I/DRA-I), thickness of the buccal/lingual bone of the mesial root (MR-B/MR-L), thickness of the buccal/lingual bone of the distal root (DR-B/DR-L). RESULTS: The MD-SS of MFM was 8.74 ± 0.76 mm, and the BL-SS was 8.26 ± 0.72 mm. The MR-B, DR-B was 1.01 ± 0.40 mm and 1.14 ± 0.50 mm, and the difference was statistically significant (P = .001). The values of the MR-L, DR-L were 2.71 ± 0.78 mm and 3.09 ± 0.73 mm, and the difference was also statistically significant (P < .001). The mean distance of RF-I was 15.68 ± 2.13 mm, and the MRA-I was 7.06 ± 2.22 mm, which was greater than that of DRA-I (6.48 ± 2.30 mm, P < .001). The IRB at 2 mm, 4 mm apical from the furcation fornix, and at apex level was 2.81 ± 0.50 mm, 3.30 ± 0.62 mm, and 4.44 ± 1.02 mm, respectively. CONCLUSION: There is relatively sufficient bone mass in interradicular bone in height, but an adequate width is lacking for the bone between the mesial and distal root after the extraction of the MFM for immediate implantation. The thickness of the MFM buccal bone is relative thin, especially for the mesial root.

RESUMEN

OBJECTIVE: In this retrospective case-control study, we aimed to evaluate the nasopharyngeal airway volume of children with Down syndrome (DS) and compare the results with those of control participants well matched for sex and age. MATERIALS AND METHODS: Fifteen children with DS (mean age = 9.43 ± 0.38 years; 8 boys, 7 girls) and 15 control participants (mean age = 9.51 ± 0.40 years; 8 boys, 7 girls) were enrolled. The nasopharyngeal airway volume and the cross-sectional morphology were measured with cone-beam computed tomography taken for orthodontic treatment. All measurements were assessed by analysis of covariance (ANCOVA) using Bonferroni post hoc pairwise comparison tests. Covariates were body height and body weight, and the ANB angle and the mandibular plane angle. Significance was set at P < .0019. RESULTS: Nasal airway, superior airway, and total airway volumes of DS participants were significantly smaller than those of the control participants in ANCOVA results adjusted for ANB angle and mandibular plane angle (P = .000). In ANCOVA results adjusted for body height and body weight, no statistically significant differences in the volume measurements were found. CONCLUSION: The results indicate that the nasopharyngeal airway volume differs between children with and without DS and that the airway volume tends to be smaller in DS children than in children without DS.

RESUMEN

INTRODUCTIONS: Understanding the factors influencing craniofacial structure growth is crucial for addressing craniofacial deformities. This study evaluates masseter muscle volume, activity, and maximum bite force across different skeletal malocclusion groups and aims to evaluate the masseter muscle volume, activity, and maximum bite force (BF) according to different skeletal malocclusion groups. METHODS: This study aimed to assess masseter muscle volume, activity, and maximum bite force (BF) across different skeletal malocclusion groups in 60 young adults (18-30 years) seeking treatment at Kirikkale University Faculty of Dentistry. Cone-Beam Computed Tomography (CBCT) imaging, radiological measurements, surface electromyography (sEMG), and force sensor measurements were employed. RESULTS: Results revealed significant differences in sEMG measurements based on sagittal classification. Vertical direction groups showed notable results in muscle volume and BF, though no significant differences were observed in sEMG values. A correlation was identified between BF and sEMG, but no correlation was found between muscle volume and other parameters. CONCLUSIONS: The findings obtained in this study suggest that the significant relationship between EMG and sagittal skeletal classification could be a valuable diagnostic tool. However, concerns about reliability were raised due to uneven distribution in muscle volume and BF among vertical direction groups. The lack of significant results in muscle volume, sEMG, and BF was attributed to CBCT limitations in soft tissue imaging and the small sample size, emphasizing caution in interpreting the findings.

RESUMEN

BACKGROUND: Incidental and screen-detected pulmonary nodules are common. The increasing capabilities of advanced diagnostic bronchoscopy will increase bronchoscopists' procedural volume necessitating optimization of procedural scheduling and workflow. OBJECTIVES: The objectives of this study were to determine total time in the procedure room, total bronchoscopy procedure time, and robotic-assisted bronchoscopy procedure time longitudinally and per specific procedure performed. DESIGN: A single-center observational study of all consecutive patients undergoing shape-sensing robotic-assisted bronchoscopy (RAB) biopsy procedures for the evaluation of pulmonary lesions with variable probability for malignancy. METHODS: Chart review to collect patient demographics, lesion characteristics, and procedural specifics. Descriptive and comparative statistics are reported. RESULTS: Actual bronchoscopy procedure time may decrease with increased institutional experience over time, however, there is limited ability to reduce non-bronchoscopy related time within the procedure room. The use of cone beam computed tomography (CBCT), rapid on-site evaluation (ROSE), and performance of staging endobronchial ultrasound transbronchial needle aspiration (EBUS-TBNA) in a single procedure are each associated with additional time requirements. CONCLUSION: Institutional procedural block times should adapt to the nature of advanced diagnostic bronchoscopy procedures to allow for the accommodation of new modalities such as RAB combined with other technologies including radial endobronchial ultrasound, CBCT, ROSE, and staging linear EBUS. Identifying institutional median procedural times may assist in scheduling and ideal block time utilization.

Times necessary to perform robotic assisted bronchoscopy biopsy procedures at a single hospitalBackground: Lung lesions and nodules are commonly seen on computed tomography (CT) scans. With advances in technology, more of these lesions are being biopsied with robotic assisted bronchoscopy (RAB) procedures, leading to increased demand. Health care providers who perform these procedures have finite available time in which they must accommodate all their procedures. Understanding procedure times is necessary to fully utilize schedules. Methods and aims overview: We describe our experience of 5 pulmonologists performing 700 robotic assisted bronchoscopies at a single hospital. Our aim is to describe the time needed for the robotic bronchoscopies over time and with specific procedures. Results and conclusion: We find that as more robotic assisted bronchoscopies are performed, the overall procedure time may decrease. Using cone beam computed tomography during the procedure, having on- site pathology review of biopsies, and obtaining biopsies of lymph nodes may lengthen the procedure time. The time spent preparing the patient for the procedure excluding the bronchoscopy remained stable. Understanding the time necessary based on what is performed during the procedure will allow it to be scheduled for the appropriate amount of time. As a result, procedure days can be fully optimized, minimizing scheduling impacts on patients and health care workers.

Asunto(s)

RESUMEN

Background To prevent harm to the neurovascular bundle during clinical and surgical operations, it is crucial to understand the position and dimension of the mental foramen, as well as the prevalence and length of the anterior loop (AL). Methods An iCAT Vision (CT Dent, London, UK) was used to take a cone beam computed tomography (CBCT) scan. Measurement of height, length of anterior loop, position and width of mental foramen was examined. Results Assessed prevalence of anterior loop and saw difference among genders, which was found to be more among males than females; anterior loop decreased as age advances. Mean anterior loop length of study subjects in different age group on right side was more than the left side, and the most common location of the mental foramen (61.87% in females and 61.36% in males) is located below the apex of the second premolar. The mean value of the distance from inferior border was 9.72mm in females and 10.78mm in males. Conclusion The current study was done with all of these characteristics in mind to assess the effectiveness of CBCT in determining anterior looping of the inferior alveolar nerve (IAN) and the position and dimension of mental foramen. In more than half of the cases analyzed, an anterior loop was discovered.

RESUMEN

Brachytherapy is a critical component of locally advanced cervical cancer treatment, and patients ineligible for brachytherapy historically have poor outcomes. Delivery of boost with stereotactic body radiation therapy (SBRT) has been studied, though toxicity is a concern. Recent case reports have explored adaptive radiation boost, which can adjust plans for inter-fraction motion using magnetic resonance guidance. Herein, we report the first patient with locally advanced cervical cancer ineligible for brachytherapy who was treated with a cone-beam computed tomography (CBCT)-guided adaptive boost following completion of chemoradiation. A 71-year-old female with locally advanced cervical cancer was treated with chemoradiation and was deemed ineligible for a brachytherapy boost due to tumor size, geometry, and a fistula with a tumor in the bladder. She was prescribed a boost to the primary tumor of 25 Gy in five fractions using CBCT-guided adaptive radiation following the completion of chemoradiation. A simulation was performed using a non-contrast CT fused with a mid-chemoradiation magnetic resonance imaging (MRI) scan to create an initial plan. For each treatment fraction, kilovoltage CBCTs were acquired, contours of organs at risk (OARs) were adjusted to reflect anatomy-of-the-day, and an adapted plan was generated. The initial and adapted plans were compared using dose-volume histogram objectives, and the adapted plan was used if it resolved OAR constraint violations or improved target coverage. The use of the initial treatment plan would have resulted in constraint violations for the rectum, sigmoid, and bladder in all fractions. The adapted plans achieved hard constraints in all fractions for all four critical OARs. The mean total treatment time across all five fractions was 58 minutes. This case demonstrates the feasibility of a CBCT-guided adaptive boost approach and the dosimetric benefits of plan adaptation in this setting. Though larger-scale and longer-term data are needed, CBCT-guided adaptive radiation may present a feasible alternative modality to deliver boost doses for brachytherapy-ineligible patients.

RESUMEN

Radix accessoria dentis are anatomical variations of the mandibular molars and identifying them radiographically can be challenging for the clinician, especially in specific areas such as endodontics. The objective this study was to determine the prevalence of radix accessoria dentis evaluated in cone-beam computed tomography in a northern Peruvian population. The study design was descriptive and cross-sectional. The sample consisted of 2640 permanent mandibular first and second molar teeth evaluated by cone beam tomography. Non-probabilistic convenience sampling was used. For the analysis of radix accesoria dentis, the axial and coronal views of the tomography were evaluated. Prevalence was evaluated according to sex and according to type of tooth and average length. The statistical analyses used were the chi-square test and Kruskal-Wallis H test to find the correlation of the variables. A prevalence of 2.5 % of radix accesoria dentis was determined. According to sex, radix accesoria dentis was present in 1.36 % in females and 1.14 % in males (p > 0.05). The tooth 4.6 obtained the highest prevalence with 1.33 % (p > 0.05) and the average length of radix accesoria dentis found was 9.27 mm (p > 0.05). The prevalence of the radix accesoria dentis evaluated in cone beam tomography in a northern Peruvian population is low. Sex does not influence its presentation. Mandibular first molars are the ones that present the greatest amount of this anatomical variation and the average length of the radix accesoria dentis is less than 10 mm.

RESUMEN

Cervical cancer is one of the most frequent malignant tumors in females. Concurrent chemoradiotherapy is one of the treatment options for cervical cancer. The treatment time of conventional radiotherapy is long. Moderately hypofractionated radiotherapy (MHRT) offers the advantage of shortening the overall treatment duration and enhancing the radiobiological effects on tumors. MHRT shortens the overall treatment duration while enhancing the radiobiological effects on tumors. Previous studies have reported that MHRT of cervical cancer has relatively high toxicity. Daily online adaptive radiation therapy (oART) showed improvements in dosimetry and a decrease in toxicity. To the best of our knowledge, this case was the first reported case of moderated hypofractionated oART used in a cervical cancer patient to date in a prospective clinical trial (NCT05994300). This case serves as a critical reminder that cervical cancer is a potential tumor that may be in MHRT with iterative cone beam computed tomography-guided oART. Further data are needed to confirm the toxicity and efficacy of this technique.

RESUMEN

Objectives: This study aimed to investigate the frequency and type of endodontic procedural errors in cases indicated for retreatment through cone-beam computed tomography (CBCT) analysis. Materials and Methods: The sample consisted of 96 CBCT scans, encompassing 122 permanent teeth with fully formed roots. Errors included perforation, instrument fracture, canal transportation, missed canals, and inadequate apical limit of filling. Additionally, potential risk factors were analyzed and subjected to statistical modeling. Results: The most frequent procedural error observed was the inadequate apical limit of filling, followed by canal transportation, perforation, missed canal, and instrument fracture. Statistically significant associations were identified between various procedural errors and specific factors. These include canal transportation and root canal wall, with the buccal wall being the most commonly affected; missed canal and tooth type, particularly the palatine and second mesiobuccal canal canals; inadequate apical limit of filling and root curvature, showing a higher deviation to the mesial direction in severely curved canals; inadequate apical limit of filling and the presence of calcifications, with underfilling being the most frequent; canal transportation and periapical lesion, notably with deviation to the buccal direction; and the direction of perforation and periapical lesion, most frequently occurring to buccal direction. Conclusions: CBCT emerges as a valuable tool in identifying procedural errors and associated factors, crucial for their prevention and management.

RESUMEN

AIM: To investigate the root number and morphology of the maxillary second molars in the Syrian population besides bilateral symmetry, and the effect of gender. METHODS: 250 Cone Beam Computed Tomography (CBCT) images (140 females, 110 males) were examined by two endodontists. The detailed analysis included the number of roots, the number of canals and their configurations, bilateral symmetry, and relation to gender. The evaluation was made according to Vertucci classification by analyzing the CBCT images at all levels (Axial, Coronal, Sagittal, Oblique, and 3D). The Chi-square statistical analysis was performed to compare the canals' morphologies and bilateral symmetry in both genders via SPSS. RESULT: The most common shape of the upper second molars is three roots (90.4%). There were significant differences between males and females regarding the symmetry of the number of roots (P < 0.05). The root canal configuration was mainly Vertucci type I classification in the Distobuccally (93.4%) and palatal root (99.6%). The most common type in the mesial root was type I (29.5%), showing all varieties of Vertucci classifications (except VII, and VIII) percentage of MB2 of 70.5%. The ratio of symmetry was (59.6%) with no significant statistical difference between the genders (P = 0.708). CONCLUSION: Most maxillary second molars in the examined Syrian population were types (II) (associated with MB2 cases with three roots and four canals). In terms of symmetry, the number of roots surpassed the canal configuration. Males had a greater symmetrical tendency in the number of roots than females.

Asunto(s)

RESUMEN

BACKGROUND: The use of cone beam computed tomography (CBCT) for dentomaxillofacial diagnostics in pediatric dentistry is expanding and concerns have been raised about the radiation risks associated with this imaging modality, especially for children. Dentomaxillofacial paediatric imaging: an investigation towards low-dose radiation induced risks (DIMITRA) is a multidisciplinary project focused on optimizing CBCT exposure for children and adolescents. This study aims to clarify the indications behind CBCT scans in children aligned with DIMITRA's recommendations. METHODS: For each CBCT examination, data were collected on patient age at the time of the CBCT examination, gender, reason for request, referring department, CBCT-requested region, and the field of view (FOV) dimension of imaging. The CBCT indications were categorized under six headings according to an adaptation of the DIMITRA project recommendations: impacted teeth, dentoalveolar trauma, orofacial clefts, dental anomalies, bone pathology, syndromes. Indications not categorized in DIMITRA were recorded below the heading "other". RESULTS: The most common indication was the "other" category (34.8%), which included implant, temporomandibular joint dysfunction, orofacial anomalies, foreign object and root canal morphology. The least common indication was "orofacial cleft" (1.9%) and no requests were made for cases related to syndromes. Detection of supernumerary tooth in dental anomalies (68.6%) was the most common CBCT indication, while dentigerous cysts (37.6%) were among the most common CBCT indication in bone pathologies and orofacial anomalies (68.1%) in the other category. The most common size was External Center (15 × 15 cm) (27%) and the least common size was Both Arches/small (8 × 8 cm) (0.4%) when the CBCT FOV was analysed. CONCLUSIONS: Although the option of a smaller FOV size was available, the larger FOV size that included the both jaws were most frequently used. When justifying CBCT requests, patient-specific radiation dose risks should be considered and specific guidelines should be followed.

Asunto(s)

RESUMEN

OBJECTIVES: To reveal the force profiles recorded by haptic autonomous robotic force feedback during the transcrestal sinus floor elevation (TSFE) process, providing a reference for the surgery strategy during TSFE. MATERIALS AND METHODS: A total of 42 maxillary sinus models with different angles of the sinus floor (30°, 40°, 50°, 60°, 70°, 80°, and 90°, compared to vertical plane) were 3D printed. Implant site preparation was performed using a robotic system, and the total force (Ft) and axial force along the drill (Fz) during the surgery were recorded by the haptic robotic arm. The actual initial breakthrough point (drill contacting sinus floor) and complete breakthrough point (drill penetrating the sinus floor) were defined visually (the actual IBP and the actual CBP). The theoretical initial breakthrough point (the theoretical IBP) and the theoretical complete breakthrough point (the theoretical CBP) defined by the robot-guided system and the CBCT were determined by real-time force feedback and imaging distance measurement, respectively. The distance from the bottom of the resin model to the actual IBP and the actual CBP was defined as Di and Dt, respectively. RESULTS: The difference in Fz began to increase significantly at 70°, while the difference in Ft became significant at 60°. When the angle was greater than 70°, there was no significant difference in the discrepancy between the actual and theoretical perforation points. Compared to judging the breakthrough point by CBCT, real-time force feedback TSFE under robotic surgery achieved more accurate initial breakthrough point detection. CONCLUSIONS: The smaller the angle, the larger the breakthrough force for the drill. The real-time force feedback of haptic robotic system during TSFE could provide reliable reference for dentists. More clinical studies are needed to further validate the application of robotic surgery assisted TSFE.

RESUMEN

BACKGROUND: Temporomandibular Disorders (TMD) is the dysfunction of group of muscles and bones in the joint area, the main symptoms of TMD are the pain of the chewing muscles and (or) the temporomandibular joints, mandibular movement disorders and joint noise. This study was designed to explore the therapeutic effects following Individual Musculoskeletally Stable (IMS) position stabilization splint therapy for TMD patients using Fricton index, cone beam computed tomography (CBCT) and surface-Electromyogram (sEMG). METHODS: In this study, we enrolled 31 TMD patients (ranging from 18 to 26 years old, including 7 males and 24 females), first Fricton index was used to evaluate the clinical curative effect of TMD with the treatment of IMS stabilization splint; then CBCT was used to observe the TMJ condylar position changes of TMD before and after the treatment of IMS stabilization splint; finally sEMG was used to observe the changes of electromyography of anterior temporalis (AT) and masseter muscles (MM) of TMD before and after the treatment of IMS stabilization splint. RESULTS: The course of treatment was 6-8 months, with an average of 7.6 months. After the IMS stabilization splint treatment, TMD symptoms relieved, especially in pain, mandibular movement disorder, but still slightly inferior in the treatment of joint noise. And there was a statistically significant difference in the anterior and inner joint space, the condyle had the tendency of moving forward and outward. AT presented reduction significantly of EMG value at rest position after treatment. CONCLUSIONS: IMS stabilization splint is a therapeutic reversible treatment for TMD, especially for pain and mandibular movement disorder; it produces effects of forward and outward condylar movement and elimination of the masticatory muscles antagonism.

Asunto(s)

RESUMEN

Background/Objectives: The aim of this study was to evaluate incidental findings in the mandible after the placement of dental implants using a new cone-beam computed tomography (CBCT) software. Methods: The initial sample consisted of 2872 CBCT scans of patients of both sexes. The parameters evaluated in this study were the location of the implants in the mandible, implant length, anatomical relationship of the implant with the mandibular canal, presence or absence of damage to the adjacent teeth, presence or absence of implant fractures, and presence or absence of bone support. Fisher's exact test was performed to compare the variables. The significance level was set at p = 0.05. Results: Out of 2872 CBCT scans, 214 images of patients with an average age of 44.5 years were included. The most frequent location of the implants was the posterior region (93.5%), with 54% of the implants having a length between 9 and 14 mm. It was found that 92% of the implants were positioned above the mandibular canal. Damage to adjacent teeth was observed, with no correlation with the implant positioning (p = 1.000). In 100% of cases of implants in the anterior region, there was bone support. Fracture was observed in 1.7% of implants with a length between 9 and 14 mm. Conclusions: The installation of implants in the mandible occurs more frequently in the posterior region, with a high presence of bone support and a low incidence of damage to adjacent teeth, anatomical structures, and fractures.

RESUMEN

Cone-beam computed tomography (CBCT) has emerged as a promising tool for the analysis of the upper airway, leveraging on its ability to provide three-dimensional information, minimal radiation exposure, affordability, and widespread accessibility. The integration of artificial intelligence (AI) in CBCT for airway analysis has shown improvements in the accuracy and efficiency of diagnosing and managing airway-related conditions. This review aims to explore the current applications of AI in CBCT for airway analysis, highlighting its components and processes, applications, benefits, challenges, and potential future directions. A comprehensive literature review was conducted, focusing on studies published in the last decade that discuss AI applications in CBCT airway analysis. Many studies reported the significant improvement in segmentation and measurement of airway volumes from CBCT using AI, thereby facilitating accurate diagnosis of airway-related conditions. In addition, these AI models demonstrated high accuracy and consistency in their application for airway analysis through automated segmentation tasks, volume measurement, and 3D reconstruction, which enhanced the diagnostic accuracy and allowed predictive treatment outcomes. Despite these advancements, challenges remain in the integration of AI into clinical workflows. Furthermore, variability in AI performance across different populations and imaging settings necessitates further validation studies. Continued research and development are essential to overcome current challenges and fully realize the potential of AI in airway analysis.

RESUMEN

BACKGROUND: Computed tomography to body divergence (CTBD) is one of the main barriers to bronchoscopic techniques for the diagnosis of peripherally located lung nodules. Cone-beam CT (CBCT) guidance is being rapidly adopted to correct for this phenomenon and to potentially increase diagnostic outcomes. In this trial, we hypothesized that the addition of mobile CBCT (m-CBCT) could improve the rate of tool in lesion (TIL) and the diagnostic yield of shape-sensing robotic-assisted bronchoscopy (SS-RAB). METHODS: This was a prospective, single-arm study, which enrolled patients with peripheral lung nodules of 1-3 cm and compared the rate of TIL and the diagnostic yield of SS-RAB alone and combined with mCBCT. RESULTS: A total of 67 subjects were enrolled, the median nodule size was 1.7 cm (range, 0.9-3 cm). TIL was achieved in 23 patients (34.3%) with SS-RAB alone, and 66 patients (98.6%) with the addition of mCBCT (p < 0.0001). The diagnostic yield of SS-RAB alone was 29.9% (95% CI, 29.3-42.3%) and it was 86.6% (95% CI, 76-93.7%) with the addition of mCBCT (p < 0.0001). There were no pneumothoraxes or any bronchoscopy-related complications, and the median total dose-area product (DAP) was 50.5 Gy-cm2. CONCLUSIONS: The addition of mCBCT guidance to SS-RAB allows bronchoscopists to compensate for CTBD, leading to an increase in TIL and diagnostic yield, with acceptable radiation exposure.

RESUMEN

Purpose: This study evaluates a deep learning-based denoising algorithm to improve the trade-off between radiation dose, image noise, and motion artifacts in TIPSS procedures, aiming for shorter acquisition times and reduced radiation with maintained diagnostic quality. Methods: In this retrospective study, TIPSS patients were divided based on CBCT acquisition times of 6 s and 3 s. Traditional weighted filtered back projection (Original) and an AI denoising algorithm (AID) were used for image reconstructions. Objective assessments of image quality included contrast, noise levels, and contrast-to-noise ratios (CNRs) through place-consistent region-of-interest (ROI) measurements across various critical areas pertinent to the TIPSS procedure. Subjective assessments were conducted by two blinded radiologists who evaluated the overall image quality, sharpness, contrast, and motion artifacts for each dataset combination. Statistical significance was determined using a mixed-effects model (p ≤ 0.05). Results: From an initial cohort of 60 TIPSS patients, 44 were selected and paired. The mean dose-area product (DAP) for the 6 s acquisitions was 5138.50 ± 1325.57 µGy·m2, significantly higher than the 2514.06 ± 691.59 µGym2 obtained for the 3 s series. CNR was highest in the 6 s-AID series (p < 0.05). Both denoised and original series showed consistent contrast for 6 s and 3 s acquisitions, with no significant noise differences between the 6 s Original and 3 s AID images (p > 0.9). Subjective assessments indicated superior quality in 6 s-AID images, with no significant overall quality difference between the 6 s-Original and 3 s-AID series (p > 0.9). Conclusions: The AI denoising algorithm enhances CBCT image quality in TIPSS procedures, allowing for shorter scans that reduce radiation exposure and minimize motion artifacts.

RESUMEN

The accomplishment of a successful pulpectomy depends on multiple factors that involve targeted removal of the causative irritants and soft and hard tissue debris by mechanical and chemical means. Compare and evaluate the efficacy of canal preparation and volumetric filling using conventional files and two rotary file systems using cone beam computed tomography (CBCT). Thirty freshly extracted human primary second molars were randomly divided into three groups of 10 teeth each. After access opening and working length determination, pre-operative volume analysis was done using CBCT. The canals were then instrumented by either hand K-files, ProTaper rotary files or Kedo-SG Blue rotary files. Post-operative volume analysis was performed using CBCT. All the canals were obturated using Metapex and scanned again using CBCT. Mean values of the pre- and post-operative canal volumes were analyzed using one-way Analysis of Variance (ANOVA). Inter- and intra-group volumetric changes were analyzed statistically using a post hoc test. The mean difference in volume after canal preparation and obturation was the highest in the Kedo-SG Blue group, followed by the ProTaper group and the least in the hand K group (p = 0.001). Inter-group comparison showed statistically significant differences between the hand K group and ProTaper group (p = 0.001), the ProTaper group and Kedo-SG Blue group (p = 0.001), and the hand-K group and Kedo-SG Blue group (p = 0.02). The volume of preparation and obturation was the highest using Kedo-SG Blue, followed by the ProTaper file systems.

Asunto(s)

RESUMEN

Background: Cone beam computed tomography (CBCT) and megavoltage computed tomography (MVCT)-based images demonstrate measurable radiomics features that are potentially prognostic. This study aims to systematically synthesize the current research applying radiomics in head and neck cancers for outcome prediction and to assess the radiomics quality score (RQS) of the studies. Methods: A systematic search was performed to identify available studies on PubMed, Web of Science, and Scopus databases. Studies related to radiomics in oncology/radiotherapy fields and based on predefined Patient, Intervention, Comparator, Outcome, and Study design (PICOS) criteria were included. The methodological quality of the included study was evaluated independently by two reviewers according to the RQS. The Mann-Whitney U test was performed according to subgroups. The P values <0.05 were considered statistically significant. Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 reporting guidelines were adhered to. Results: From a total of 743 identified studies, six original studies were eligible for inclusion in the systematic review (median =97 patients). The intraclass correlation coefficient (ICC) for inter-reviewer on total RQS was excellent with 0.99 [95% confidence interval (CI) of 0.946< ICC <0.999]. There were no significant differences in the analyses between each RQS domain and subgroup components (P always >0.05). Numerically higher RQS domains score for publication year ≤2022 than 2023 and number of patients > median than ≤ median but not statistically significant. Conclusions: The number of radiomics studies involving CBCT and MVCT is still very limited. Self-reported RQS assessments should be encouraged for all radiomics studies.

RESUMEN

Background: With the widespread adoption of computed tomography (CT) technology, the number of detected pulmonary nodules has gradually increased. CT-guided percutaneous needle biopsy has become the primary method for qualitative diagnosis of pulmonary nodules. Benefiting from its three-dimensional (3D) reconstruction capability, cone-beam CT (CBCT) technology has also been widely adopted. Nevertheless, pneumothorax remains the most common complication of these diagnostic and therapeutic procedures. This study assessed the diagnostic accuracy of conventional CT (CCT)- and CBCT-guided coaxial core needle biopsy (CCNB) and the effectiveness of gelfoam particle suspension in reducing complications through tract embolization. Methods: A retrospective analysis was conducted on 320 patients who had undergone CCNB for nodules ≤3 cm from January 2020 to June 2022 at Zhongshan People's Hospital, comprising 325 biopsies (145 CCT-guided and 180 CBCT-guided). Gelfoam tract embolization was specifically used in biopsies of patients identified with a high risk of complications. Comparative statistics involved diagnostic outcomes (sensitivity, specificity, accuracy), procedural lengths, complication occurrences, and radiation doses. Results: Diagnostically, both CCT (sensitivity 93.3%, specificity 100%, accuracy 94.1%) and CBCT (sensitivity 92.8%, specificity 100%, accuracy 93.8%) offered a similarly high performance. The CCT technique was preferable in terms of shorter median operational times (19 vs. 24 minutes; P<0.001) and greater radiation exposure (13.9 vs. 10.1 mSv; P<0.001). The complication rates of CBCT and CCT, such as those of pneumothorax (18.9% vs. 20.7%; P=0.69) and hemorrhage (23.9% vs. 18.6%; P=0.25), were comparable. Of note, the comparison of biopsies with and without gelfoam embolization revealed a marked reduction in postoperative pneumothorax incidence (1.24% vs. 7.9%; P=0.004) and the requirement for drainage (0% vs. 4.27%; P=0.02), indicating the effectiveness of this procedure. Conclusions: CCT- and CBCT-guided lung biopsies demonstrate equivalent diagnostic capacities, with CCT providing shorter median operational times. Importantly, gelfoam embolization substantially diminishes the risk of postoperative pneumothorax, underscoring its value in high-risk patients.