RESUMEN

A new convenient method for identifying colorant compounds (CCs) in food matrices was developed using high-performance liquid chromatography with a diode array detector and quadrupole-time-of-flight mass spectrometer (HPLC-DAD-Q/TOF-MS) combined with theoretical calculations. A model sample containing three typical CCs was completely separated via HPLC-DAD. The obtained 3D ultraviolet-visible (UV-vis) spectra revealed the maximum absorption wavelengths (MAWs) of all CCs (yellow, 430 nm; red, 520 nm; blue, 620 nm) in the range of 400-800 nm, and their colors were determined based on their MAWs. Temporary structures of the CCs were obtained using Q/TOF-MS analysis. Theoretical calculations were then performed to obtain the theoretical MAWs and colors of the CCs according to their calculated UV-vis spectra based on temporary structures. The structures of the CCs were confirmed without the need for authoritative standards by comparing the consistency between their experimental and theoretical MAWs and colors. This method is particularly suitable for identifying CCs or compounds with UV-Vis absorption, including new compounds, compounds for which standards are difficult to obtain, and known compounds without reporting relevant molecular information.

RESUMEN

In this study, indigo carmine (IC)-calcium carbonate lakes with different crystalline forms of calcium carbonate were prepared through co-precipitation methods, and the properties of these lakes and their formation mechanisms were investigated. The results showed that amorphous calcium carbonate (ACC) exhibited the smallest particle size and the largest specific surface area, resulting in the highest adsorption efficiency. Vaterite, calcite, and aragonite followed after ACC in decreasing order of adsorption efficiency. Kinetic analysis and isothermal analysis revealed the occurrence of chemisorption and multilayer adsorption during formation of the lakes. The FTIR and Raman spectra suggested participation of sulfonic acid groups in chemisorption. Appearance of IC significantly altered TGA curves by changing weight loss rate before decomposition of calcium carbonate. EDS analysis revealed the adsorption of IC predominantly happened on the surface of calcium carbonate particles rather than the interior.

RESUMEN

The prevalent use of Azorubine (E122) and the unintentional food additive, Bisphenol A (BPA), in ready-to-drink (RTD) beverages raises significant health concerns, especially for children. The combined impact on embryonic development must be explored despite individual safety assessments. Our investigation revealed that the combined exposure of E122 and BPA at beverage concentration significantly induces mortality and morphological deformities, including reduced growth, pericardial edema, and yolk sac edema. The co-exposure triggers oxidative stress, impairing antioxidant enzyme responses and resulting in lipid and cellular damage. Notably, apoptotic cells are observed in the neural tube and notochord of the co-exposed larvae. Critical genes related to the antioxidant response elements (nrf2, ho1, and nqo1), apoptosis activation (bcl2, bax, and p53), and pro/anti-inflammatory cytokines (nfkb, tnfa, il1b, tgfb, il10, and il12) displayed substantial changes, highlighting the molecular mechanisms. Behavior studies indicated hypo-locomotion with reduced thigmotaxis and touch response in co-exposed larvae, distinguishing it from individual exposures. These findings underscore the neurodevelopmental impacts of E122 and BPA at reported beverage concentrations, emphasizing the urgent need for comprehensive safety assessments, particularly for child consumption.

Asunto(s)

RESUMEN

Natural and synthetic colorants present in food can modulate hemostasis, which includes the coagulation process and blood platelet activation. Some colorants have cardioprotective activity as well. However, the effect of genipin (a natural blue colorant) and synthetic blue colorants (including patent blue V and brilliant blue FCF) on hemostasis is not clear. In this study, we aimed to investigate the effects of three blue colorants-genipin, patent blue V, and brilliant blue FCF-on selected parameters of hemostasis in vitro. The anti- or pro-coagulant potential was assessed in human plasma by measuring the following coagulation times: thrombin time (TT), prothrombin time (PT), and activated partial thromboplastin time (APTT). Moreover, we used the Total Thrombus formation Analysis System (T-TAS, PL-chip) to evaluate the anti-platelet potential of the colorants in whole blood. We also measured their effect on the adhesion of washed blood platelets to fibrinogen and collagen. Lastly, the cytotoxicity of the colorants against blood platelets was assessed based on the activity of extracellular lactate dehydrogenase (LDH). We observed that genipin (at all concentrations (1-200 µM)) did not have a significant effect on the coagulation times (PT, APTT, and TT). However, genipin at the highest concentration (200 µM) and patent blue V at the concentrations of 1 and 10 µM significantly prolonged the time of occlusion measured using the T-TAS, which demonstrated their anti-platelet activity. We also observed that genipin decreased the adhesion of platelets to fibrinogen and collagen. Only patent blue V and brilliant blue FCF significantly shortened the APTT (at the concentration of 10 µM) and TT (at concentrations of 1 and 10 µM), demonstrating pro-coagulant activity. These synthetic blue colorants also modulated the process of human blood platelet adhesion, stimulating the adhesion to fibrinogen and inhibiting the adhesion to collagen. The results demonstrate that genipin is not toxic. In addition, because of its ability to reduce blood platelet activation, genipin holds promise as a novel and valuable agent that improves the health of the cardiovascular system and reduces the risk of cardiovascular diseases. However, the mechanism of its anti-platelet activity remains unclear and requires further studies. Its in vivo activity and interaction with various anti-coagulant and anti-thrombotic drugs, including aspirin and its derivatives, should be examined as well.

Asunto(s)

RESUMEN

Butterfly pea is a natural color source used in food and dessert. This study optimized ultrasound-assisted extraction with ethanol for pigments from butterfly pea flowers (BPF) using a Box-Behnken method. Key factors explored were solid-to-solvent ratio, ultrasound extraction time, and ethanol concentration. The extracted compounds were evaluated for extraction yield (EY), total phenolic content (TPC), total anthocyanin content (TAC), and DPPH antioxidant activity. EY increased significantly with reduced ethanol concentration. Optimal conditions were predicted and experimentally validated. BPF extracts showed distinct absorption wavelengths at different pH levels. BPF extract was used in coconut milk jelly, resulting in the lowest b* value. These findings highlight the value of optimal ultrasonic-assisted extraction for enhancing BPF's natural colorant extraction and promoting sustainable use in food and dessert applications.

RESUMEN

Multifunctional smart biopolymeric films were fabricated using rose petal anthocyanin (RPA) and carrageenan (CAR) doped with rose petal-derived carbon dots (RP-CDs). Response surface-optimized RPA showed the highest total anthocyanins and radical scavenging ability. Produced RP-CD exhibited UV absorption and high fluorescence with antibacterial/antioxidant abilities. Enrichment with 2 % RP-CD and 5 % RPA in the CAR matrix results in improved physicochemical, i.e., water contact angle, water vapor permeability, and UV-blocking properties of the fabricated material. Results showed that nanocomposite films scavenged radicals better than the neat CAR films. Zeta potential, FTIR, SEM, and XPS suggested improved compatibility/stability and enhanced elemental configuration of RP-CDs/RPA additives in the CAR polymer matrix. Perishable food packaging (minced pork and shrimp) demonstrated that nanocomposite films work efficiently and non-destructively and are promising tools for monitoring real-time freshness through interpretable visual changes from red to yellow. The CAR/RP-CDs/RPA-based nanocomposite indicator films are expected to be applied as various smart packaging materials. These films possess the ability to promptly detect changes in quality, preserve the quality, and prolong the shelf life of packaged foods.

Asunto(s)

RESUMEN

The dyeing and adulteration of traditional Chinese medicines (TCMs) are continuously updated. Valuable analytical methods for the daily inspection of illegal colorant additives in TCMs and the preparations are in demand. Two deep eutectic solvent (DES)-based vortex-assisted liquid-liquid microextraction (VA-LLME) and ultrasonic-assisted solid-liquid microextraction (UA-SLME) were developed for the sample pretreatment of ten water-soluble colorants and five water-insoluble colorants, respectively, followed by an HPLC-DAD detection. Fifteen colorants were analyzed at four detection wavelengths within 40 min of gradient elution. The optimal DES of VA-LLME and UA-SLME were screened from 23 homemade DESs. The factors affecting the extraction efficiency of VA-LLME and UA-SLME were optimized systematically. Under the optimal conditions, ten water-soluble colorants analyzed by DES-based VA-LLME-HPLC-DAD showed good linearity (R ≥ 0.9995) within the optimal linear range. The LODs and LOQs were 0.2-1.0 µg g-1 and 0. 5-5.0 µg g-1, respectively. The recoveries of spiked samples were 80.2%-104.7 %, with RSDs ≤ 4.39 %. Five water-insoluble colorants of Sudan I‒IV and Sudan 7B analyzed by DES-based UA-SLME-HPLC-DAD showed good linearity (R ≥ 0.9995) within the optimal linear range. The LODs and LOQs were 0.8-8.0 µg g-1 and 4.0-40.0 µg g-1, respectively. The recoveries of spiked samples were 94.2%-103.1 %, with RSDs ≤ 4.81 %. The proposed DES-based VA-LLME-HPLC-DAD was successfully applied to analyze six water-soluble yellow colorants in Cuscutae Semen, salted Cuscutae Semen, and four water-soluble red colorants in Schisandrae Chinensis Fructus. The proposed DES-based UA-SLME-HPLC-DAD was successfully applied to analyze five water-insoluble red colorants in Dieda pills. The study provides analytical method options for routine tests of water-soluble, water-insoluble, or both water-soluble/-insoluble illegal colorant additives in herbal medical materials and preparations by the relevant proposed DES-based sample pretreatment method or a combination of the two proposed DES-based methods.

Asunto(s)

RESUMEN

Novel meat-inspired products, such as cell-cultivated meat and meat analogues, embrace environmental sustainability, food safety and security, animal welfare, and human health, but consumers are still hesitant to accept these products. The appearance of food is often the most persuasive determinant of purchasing decisions for food. Producing cultivated meat and meat analogues with similar characteristics to conventional meat could lead to increased acceptability, marketability, and profitability. Color is one of the sensorial characteristics that can be improved using color-inducing methods and colorants. Synthetic colorants are cheap and stable, but natural pigments are regarded as safer components for novel food production. The complexity of identifying specific colorants to imitate both raw and cooked meat color lies in the differences in ingredients and methods used to produce meat alternatives. Research devoted to improving the sensorial characteristics of meat analogues has noted various color-inducing methods (e.g., ohmic cooking and pasteurization) and additives (e.g., lactoferrin, laccase, xylose, and pectin). Additionally, considerations toward other meat components, such as fat, can aid in mimicking conventional meat appearance. For instance, the use of plant-based fat replacers and scaffolds can produce a marked sensory enhancement without compromising the sustainability of alternative meats. Moving forward, consumer-relevant sensorial characteristics, such as taste and texture, should be prioritized alongside improving the coloration of meat alternatives.

RESUMEN

This study prepared a novel ß-carotene colorant lake using calcium carbonate (CaCO3) and investigated the lake formation process and its basic characteristics. Kinetic adsorption analysis confirmed that medium pH (9.3) and medium temperature (40 °C) were more suitable for lake preparation, while desorption occurred, possibly due to crystalline transformation of CaCO3. The isothermal analysis and model fitting results suggested that the ß-carotene and CaCO3 particles combined via a monolayer adsorption process driven by physical force. Electrostatic attraction likely participated in the process due to the net negative surface charges of ß-carotene dispersion and positively charged groups on the CaCO3 particle surfaces. Ethanol, ultrasonic treatment, and drying method significantly influenced the immobilization efficiency (IE) of ß-carotene in the lake and light stability of the lake, without affecting its crystal form. The thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) curves confirmed absorption of ß-carotene onto CaCO3. Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analyses indicated no obvious chemical bonds between ß-carotene and CaCO3. Energy-dispersive spectroscopy (EDS) confirmed the presence of ß-carotene on surfaces but not in the interior of the CaCO3 particles. The adsorption of ß-carotene by calcium carbonate was further confirmed to be a physical adsorption on surface.

RESUMEN

Natural phytochemicals are well known to protect against numerous metabolic disorders. Anthocyanins are vacuolar pigments belonging to the parent class of flavonoids. They are well known for their potent antioxidant and gut microbiome-modulating properties, primarily responsible for minimizing the risk of cardiovascular diseases, diabetes, obesity, neurodegenerative diseases, cancer, and several other diseases associated with metabolic syndromes. Berries are the primary source of anthocyanin in the diet. The color and stability of anthocyanins are substantially influenced by external environmental conditions, constraining their applications in foods. Furthermore, the significantly low bioavailability of anthocyanins greatly diminishes the extent of the actual health benefits linked to these bioactive compounds. Multiple strategies have been successfully developed and utilized to enhance the stability and bioavailability of anthocyanins. This review provides a comprehensive view of the recent advancements in chemistry, biosynthesis, dietary sources, stabilization, bioavailability, industrial applications, and health benefits of anthocyanins. Finally, we summarize the prospects and challenges of applications of anthocyanin in foods.

RESUMEN

Ferritin is a cage-like protein with modifiable outer and inner surfaces. To functionalize ferritin with preferable carrier applications, caffeic acid was first covalently bound to the soybean ferritin outer surface to fabricate a caffeic acid-ferritin complex (CFRT) by alkali treatment (pH 9.0). A decreased content of free amino acid (0.34 µmol/mg) and increased polyphenol binding equivalent (63.76 nmol/mg) indicated the formation of CFRT (ferritin/caffeic acid, 1:80). Fluorescence and infrared spectra verified the binding of caffeic acids to the ferritin structure. DSC indicated that the covalent modification enhanced the thermal stability of CFRT. Besides, CFRT maintained the typically spherical shape of ferritin (12 nm) and a hydration radius of 7.58 nm. Moreover, the bioactive colorant betanin was encapsulated in CFRT to form betanin-loaded CFRT (CFRTB), with an encapsulation rate of 15.5% (w/w). The betanin stabilities in CFRTB were significantly improved after heat, light, and Fe3+ treatments, and its red color retention was enhanced relative to the free betanin. This study delves into the modifiable ferritin application as nanocarriers of dual molecules and gives guidelines for betanin as a food colorant.

Asunto(s)

RESUMEN

A novel quinophthalone derivative, 4,5,6,7-tetrachloro-2-(2-(3-hydroxy-1-oxo-1H-cyclopenta[b]naphthalen-2-yl)quinolin-4-yl)isoindoline-1,3-dione (TCHCQ), was designed and synthesized as a yellow colorant additive for green color filters in image sensors. The characteristics of the new material were evaluated in terms of optical, thermal, and chemical properties under solution and color filter film conditions. TCHCQ exhibited a significantly enhanced molar extinction coefficient in solution, being 1.21 times higher than that of the commercially used yellow colorant Y138. It also demonstrated excellent thermal stability, with a decomposition temperature (Td) exceeding 450 °C. Utilizing the nano-pigmentation process, TCHCQ was used to prepare nano-sized particles with an excellent average size of 35 nm. This enabled the fabrication of a color filter film with outstanding properties. The optical properties of the produced film revealed outstanding yellow colorant transmittance of 0.97% at 435 nm and 91.2% at 530 nm. The color filter film exhibited similar optical and thermal stability to Y138, with an improved chemical stability, as evidenced by a ΔEab value of 0.52. The newly synthesized TCHCQ is considered a promising candidate for use as a yellow colorant additive in image sensor color filters, demonstrating superior optical, thermal, and chemical stability.

RESUMEN

Black tea (Camellia sinensis) is a widely consumed beverage and is subjected to adulteration. In this study, the combination of ion mobility spectrometry and machine learning techniques was employed to detect synthetic colorants in black tea. To accomplish our objective, six synthetic colorants (carmine, carmoisine, indigo carmine, brilliant blue, sunset yellow, and tartrazine) were added to pure tea at different concentrations. A qualitative model was built using partial least squares discriminant analysis (PLS-DA) for the collected data and exhibited 100% accuracy in identifying synthetic colorants in black tea. For quantitative analysis, a PLS regression model was employed. The R2 values obtained for the test set ranged from 0.986 to 0.997. The method developed in this study has proven to be reliable and effective in detecting synthetic colorants in black tea. Also, this method is a simple, rapid, and trustworthy tool for identifying adulteration in black tea.

RESUMEN

The peels are considered part of waste products, which are generally discarded. The use of persimmon peel is associated with its phenolic content, dietary fibers, minerals, and pectins. The main objective of this study was to evaluate changes in antioxidant activity, total phenolic contents (TPC), and color parameters of persimmon peels after freeze drying (-85 °C for 24h), vacuum oven drying (45 °C for 12h), oven drying (50 °C for 12h) and microwave oven drying treatment (900W for 10s). In the next step, the functional ice cream was prepared and studied by adding dried persimmon peel powder (DPPP). Various properties of the resulting ice cream at 4 levels of DPPP addition were investigated. The results showed that the highest value of L*,a*,and b* parameters were in the freeze-dried sample. There was a significant difference in the TPC of samples that dried by different methods (p < 0.05). The highest amount of TPC was observed in the freeze-dried sample (673 ± 2.0 mgGAE/100g) and the lowest one was observed in the oven-dried sample (352 ± 0.5 mgGAE/100g). The highest value for IC50 (concentration of the antioxidant compound that is necessary for the DPPH radical concentration to reach 50 % of the initial value) was in the sample dried in the oven, following the vacuum oven, microwave, and the lowest value was in the freeze-dried sample. DPPP produced by the freeze-drying method was applied in ice cream formulation at different levels (0-3 %wt.). By increasing the amount of DPPP from 0 to 3 %, the overrun and L* decreased and a*, b*, hardness, and melting resistance of ice cream increased significantly (p < 0.05). Based on our findings, DPPP has the potential to be applied as an added-value ingredient in the ice cream industry to improve the functional characteristics of its products.

RESUMEN

The production of sustainable materials with properties aimed at the additive manufacturing of electrochemical sensors has gained prestige in the scientific scenario. Here, a novel lab-made composite material using graphite (G) and carbon nitride (C3N4) embedded into polylactic acid (PLA) biopolymer is proposed to produce 3D-printed electrodes. PLA offers printability and mechanical stability in this composition, while G and C3N4 provide electrical properties and electrocatalytic sites, respectively. Characterizations by Raman and infrared spectroscopies and Energy Dispersive X-rays indicated that the G/C3N4/PLA composite was successfully obtained, while electron microscopy images revealed non-homogeneous rough surfaces. Better electrochemical properties were achieved when the G/C3N4/PLA proportion (35:5:60) was used. As a proof of concept, amaranth (AMR), a synthetic dye, was selected as an analyte, and a fast method using square wave voltammetry was developed. Utilizing the 3D-printed G/C3N4/PLA electrode, a more comprehensive linear range (0.2 to 4.2 µmol/L), a 5-fold increase in sensitivity (9.83 µmol-1 L µA), and better limits of detection (LOD = 0.06 µmol/L) and quantification (LOQ = 0.18 µmol/L) were achieved compared to the G/PLA electrode. Samples of jelly, popsicles, isotonic drinks, and food flavoring samples were analyzed, and similar results to those obtained by UV-vis spectrometry confirmed the method's reliability. Therefore, the described sensor is a simple, cost-effective alternative for assessing AMR in routine food analysis.

Asunto(s)

RESUMEN

In this work we have studied the interaction of the food dye Indigo-Carmine (IndC) with the most studied model transport proteins i.e. human and bovine serum albumin (HSA & BSA). A multispectroscopic approach was used to analyze the details of the binding process. The intrinsic fluorescence of both the albumins was significantly quenched by IndC and the quenching was both static and dynamic in nature with the former being dominant. The HSA-lndC and BSA-IndC distance after complexation was determined by Förster resonance energy transfer (FRET) method which suggested efficient energy transfer from the albumins to IndC. Thermodynamics of serum protein-IndC complexation was estimated by isothermal titration calorimetry (ITC) which revealed that the binding was enthalpy driven. Circular dichroism (CD) and FTIR spectroscopy revealed that the binding of IndC induced secondary structural changes in both the serum proteins. Synchronous and 3D fluorescence spectroscopy revealed that the binding interaction caused microenvironmental changes of protein fluorophores. Molecular docking analysis suggested that hydrogen bonding and hydrophobic interactions are the major forces involved in the complexation process.

Asunto(s)

RESUMEN

Iron oxide of various structures is frequently used as food colorant (E 172). The spectrum of colors ranges from yellow over orange, red, and brown to black, depending on the chemical structure of the material. E 172 is mostly sold as solid powder. Recent studies have demonstrated the presence of nanoscaled particles in E 172 samples, often to a very high extent. This makes it necessary to investigate the fate of these particles after oral uptake. In this study, 7 differently structured commercially available E 172 food colorants (2 x Yellow FeO(OH), 2 x Red Fe2O3, 1 x Orange Fe2O3 + FeO(OH) and 2 x Black Fe3O4) were investigated for particle dissolution, ion release, cellular uptake, crossing of the intestinal barrier and toxicological impact on intestinal cells. Dissolution was analyzed in water, cell culture medium and artificial digestion fluids. Small-angle X-ray scattering (SAXS) was employed for determination of the specific surface area of the colorants in the digestion fluids. Cellular uptake, transport and toxicological effects were studied using human differentiated Caco-2 cells as an in vitro model of the intestinal barrier. For all materials, a strong interaction with the intestinal cells was observed, albeit there was only a limited dissolution, and no toxic in vitro effects on human cells were recorded.

Asunto(s)

RESUMEN

The removal of color-causing compounds from wastewater is a significant challenge that industries encounter due to their toxic, carcinogenic, and harmful properties. Despite the extensive research and development of various techniques with the objective of effectively degrading color pollutants, the challenge still persists. This paper introduces a simple technique for producing iron oxide nanoparticles (Fe2O3 NPs) using orange fruit peel for sustainable dye degradation in aqueous environment. The observation of color change and the measurement of UV-visible absorbance at 240 nm provided a confirmation for the development of Fe2O3 NPs. Transmission electron microscopy examination demonstrated that the Fe2O3 NPs have an agglomerated distribution and forming spherical structures with size ranging from 25-80 nm. Energy-dispersive X-ray spectroscopy analysis supported the existence of Fe and O. Fourier transform infrared spectroscopy conducted to investigate the involvement of orange peel extract in the reduction, capping, and synthesis of Fe2O3 NPs from the precursor salt. Fe2O3 NPs showed a photocatalytic remediation of 97%, for methylene blue under visible light irradiation. Additionally, prepared NPs exhibited concentration depended biofilm inhibition action against E. coli and S. aureus. In conclusion, Fe2O3 NPs can efficiently purify water and suppress pathogens due to their strong degrading activity, reusability, and biofilm inhibition property.

Asunto(s)

RESUMEN

As a current trend of fabricating healthier products, food manufacturing companies seek for natural-based food colorant aiming to replace the synthetic ones, which apart from meeting sensorial and organoleptic aspects, they can also act as health promoters offering additional added value. Carminic acid is a natural based food colorant typically found in several insect taxa. However, there are current approaches which pursue the production of this natural pigment via biotechnological synthesis. To date, this colorant has been intensively applied in the manufacture of several food items. Unfortunately, one of the main limitations deals with the establishment of the right protocol of extraction and purification of this component since there is no report analyzing the main extraction techniques for obtaining carminic acid. Therefore, this review, for the first time, comprehensively analyzes the ongoing strategies and protocols proposed by scientists towards either extraction or purification of carminic acid from its origin source, and from biotechnological systems. Emphasis has been focused on the main findings dealing with extraction techniques and the relevant insights in the field. A detailed discussion is provided on the advantages and drawbacks of the reported extraction and purification methods, main solvents used and their key interactions with target molecules.

Asunto(s)

RESUMEN

The current synthetic plastic-based packaging creates environmental hazards that impact climate change. Hence, the topic of the current research in food packaging is biodegradable packaging and its development. In addition, new smart packaging solutions are being developed to monitor the quality of packaged foods, with dual functions as food preservation and quality indicators. In the creation of intelligent and active food packaging, many natural colorants have been employed effectively as pH indicators and active substances, respectively. This review provides an overview of biodegradable polymers and natural colorants that are being extensively studied for pH-indicating packaging. A comprehensive discussion has been provided on the current status of the development of intelligent packaging systems for food, different incorporation techniques, and technical challenges in the development of such green packaging. Finally, the food industry and environmental protection might be revolutionized by pH-sensing biodegradable packaging enabling real-time detection of food product quality and safety.

Asunto(s)