RESUMEN

In this study, the efficacy of two of the best performing green solvents for the fractionation of lignocellulosic biomass, cholinium arginate (ChArg) as biobased ionic liquid (Bio-IL) and ChCl:lactic acid (ChCl:LA, 1:10) as natural deep eutectic solvent (NADES), was investigated and compared in the pretreatment of an agri-food industry waste, apple fibers (90°C for 1 h). For the sake of comparison, 1-butyl-3-methylimidazolium acetate (BMIM OAc) as one of the best IL able to dissolve cellulose was also used. After the pretreatment, two fractions were obtained in each case. The results gathered through FTIR and TG analyses of the two materials and the subsequent DNS assay performed after enzymatic treatment led to identify ChArg as the best medium to delignify and remove waxes, present on the starting apple fibers, thus producing a material substantially enriched in cellulose (CRM). Conversely, ChCl:LA did not provide satisfactorily results using these mild conditions, while BMIM OAc showed intermediate performance probably on account of the reduced crystallinity of cellulose after the dissolution-regeneration process. To corroborate the obtained data, FTIR and TG analyses were also performed on the residues collected after the enzymatic hydrolysis. At the end of the pretreatment, ChArg was also quantitatively recovered without significant alterations.

RESUMEN

BACKGROUND: The combination of cellulase and lytic polysaccharide monooxygenase (LPMO) is known to boost enzymatic saccharification of cellulose. Although the synergy between cellulases (GH5, 6 or 7) and LPMOs (AA9) has been extensively studied, the interplay between other glycoside hydrolase and LPMO families remains poorly understood. RESULTS: In this study, two cellulolytic enzyme-encoding genes SmBglu12A and SmLpmo10A from Streptomyces megaspores were identified and heterologously expressed in Escherichia coli. The recombinant SmBglu12A is a non-typical endo-ß-1,4-glucanase that preferentially hydrolyzed ß-1,3-1,4-glucans and slightly hydrolyzed ß-1,4-glucans and belongs to GH12 family. The recombinant SmLpmo10A belongs to a C1-oxidizing cellulose-active LPMO that catalyzed the oxidation of phosphoric acid swollen cellulose to produce celloaldonic acids. Moreover, individual SmBglu12A and SmLpmo10A were both active on barley ß-1,3-1,4-glucan, lichenan, sodium carboxymethyl cellulose, phosphoric acid swollen cellulose, as well as Avicel. Furthermore, the combination of SmBglu12A and SmLpmo10A enhanced enzymatic saccharification of phosphoric acid swollen cellulose by improving the native and oxidized cello-oligosaccharides yields. CONCLUSIONS: These results proved for the first time that the AA10 LPMO was able to boost the catalytic efficiency of GH12 glycoside hydrolases on cellulosic substrates, providing another novel combination of glycoside hydrolase and LPMO for cellulose enzymatic saccharification.

RESUMEN

The GH3 ß-glucosidase gene of Myceliophthora thermophila (MtBgl3c) has been cloned and heterologously expressed in E. coli for the first time. This study highlights the important characteristics of recombinant MtBgl3c (rMtBgl3c) which make it a promising candidate in industrial applications. Optimization of the production of rMtBgl3c led to 28,000 U L-1. On purification, it has a molecular mass of ∼100 kDa. It is a broad substrate specific thermostable enzyme that exhibits pH and temperature optima at 5.0 and 55 °C, respectively. The amino acid residues Asp287 and Glu514 act as nucleophile and catalytic acid/base, respectively in the enzyme catalysis. Its low Km value (1.28 mM) indicates a high substrate affinity as compared to those previously reported. The rMtBgl3c displays a synergistic action with the commercial enzyme cocktail in the saccharification of sugarcane bagasse suggesting its utility in the cellulose bioconversion. Tolerance to solvents, detergents as well as glucose make this enzyme applicable in wine, detergent, paper and textile industries too.

Asunto(s)

RESUMEN

Ascorbic acid (AscA) and gallic acid (GalA) are common electron donors and their boosting effect on lytic polysaccharide monooxygenases (LPMO) has been studied extensively. However, their influence on cellulase hydrolytic action has been ignored. In this work, the effect of AscA and GalA on cellulases hydrolytic action was evaluated. It was found that AscA could increase the hydrolysis of cellulose by cellulases, while GalA showed no effect on cellulases' hydrolytic action. The effect of AscA differed for the monocomponent cellulases: it showed a special boosting effect on cellobiohydrolase, rather than endoglucanase and ß-glucosidase. This promoting effect could be another mechanism behind the boosting effect of the AscA-driven LPMO system on cellulose saccharification. These findings thus advance the understanding of the role of electron donors on cellulose saccharification and offer important clues on how to evaluate the feasibility of electron donors from a new perspective.

Asunto(s)

RESUMEN

A codon optimized cellobiohydrolase (CBH) encoding synthetic gene of 1188 bp from a thermophilic mold Myceliophthora thermophila (MtCel6A) was cloned and heterologously expressed in Escherichia coli for the first time. In silico analysis suggested that MtCel6A is a GH6 CBH and belongs to CBHII family, which is structurally similar to Cel6A of Humicola insolens. The recombinant MtCel6A is expressed as active inclusion bodies, and the molecular mass of the purified enzyme is ~ 45 kDa. The rMtCel6A is active in a wide range of pH (4-12) and temperatures (40-100 °C) with optima at pH 10.0 and 60 °C. It exhibits T1/2 of 6.0 and 1.0 h at 60 and 90 °C, respectively. The rMtCel6A is an extremozyme with organic solvent, salt and alkali tolerance. The Km, Vmax, kcat and kcat/Km values of the enzyme are 3.2 mg mL-1, 222.2 µmol mg-1 min-1, 2492 s-1 and 778.7 s-1 mg-1 mL-1, respectively. The product analysis of rMtCel6A confirmed that it is an exoenzyme that acts from the non-reducing end of cellulose. The addition of rMtCel6A to the commercial cellulase mix (Cellic CTec2) led to 1.9-fold increase in saccharification of the pre-treated sugarcane bagasse. The rMtCel6A is a potential CBH that finds utility in industrial processes such as in bioethanol, paper pulp and textile industries.

RESUMEN

In this study, an economically competitive and sustainable levulinic acid-based protic ionic liquids were identified to be good solvents for the dissolution pretreatment of cellulose towards enhanced enzymatic hydrolysis. The influences of protic ionic liquids species, dissolution pretreatment time, and pretreatment temperature on the physico-chemical structures of cellulose were systematically investigated by various analytical techniques. The findings indicate that the pretreatment efficiency was correlated to the basicity of the organic bases, and the presence of ketone group in the levulinate anion with particular hydrogen bonding forming ability via keto-enol tautomerism. The DBN derived protic ionic liquids exhibited best performance at 100 °C in 1 h, as evidenced by a 94% glucose yield. This solvent system was also suitable for the dissolution pretreatment of corn stover-based lignocellulosic biomass for sugars production, although a higher temperature and longer pretreatment time was required. Furthermore, the solvent system could be recycled and reused.

Asunto(s)

RESUMEN

Lignocellulosic biomass is a renewable and sustainable energy source. Cellulases are the enzymes that cleave ß-1, 4-glycosidic linkages in cellulose to liberate sugars that can be fermented to ethanol, butanol, and other products. Low enzyme activity and yield, and thermostability are, however, some of the limitations posing hurdles in saccharification of lignocellulosic residues. Recent advancements in synthetic and systems biology have generated immense interest in metabolic and genetic engineering that has led to the development of sustainable technology for saccharification of lignocellulosics in the last couple of decades. There have been several attempts in applying genetic engineering in the production of a repertoire of cellulases at a low cost with a high biomass saccharification. A diverse range of cellulases are produced by different microbes, some of which are being engineered to evolve robust cellulases. This review summarizes various successful genetic engineering strategies employed for improving cellulase kinetics and cellulolytic efficiency.

RESUMEN

Ultrafiltration reactors based on polymeric or ceramic membranes were shown to be suitable catalytic systems for fast enzymatic saccharification of cellulose, allowing the full recovery and reuse of enzymes. By pre-treating cellulose with the IL 1-butyl-3-methylimidazolium chloride, the suitability of this substrate for enzymatic saccharification in a reactor based on polymeric ultrafiltration membranes was demonstrated, leading to 95% cellulose hydrolysis in 4h at 50°C. The filtration process gave a clear glucose solution (up to 113 mM) at constant permeate flow (24.7 L h(-1) m(-2)), allowing the enzyme to be reused for 9 operation cycles under semi-continuous operation, without any loss of enzyme activity. Under continuous operation mode and using ceramic ultrafiltration membranes at different residence times, the enzymatic reactor showed constant profiles in both the permeate flow rate and the glucose concentration, demonstrating the excellent suitability of the proposed approach for the saccharification of cellulose.

Asunto(s)