RESUMEN

Organometallic molecules are promising for molecular electronic devices due to their potential to improve electrical conductance through access to complex orbital covalency that is not available to light-element organic molecules. However, studies of the formation of organometallic monolayers and their charge transport properties are scarce. Here, we report the cluster formation and charge transport properties of gold-triarylbismuthane-gold molecular junctions. We found that triarylbismuthane molecules with -CN anchoring groups form clusters during the creation of self-assembled submonolayers. This clustering is attributed to strong interactions between the bismuth (Bi) center and the nitrogen atom in the -CN group of adjacent molecules. Examination of the influence of -NH2 and -CN anchoring groups on junction conductance revealed that, despite a stronger binding energy between the -NH2 group and gold, the conductance per molecular unit (i.e., molecule for the -NH2 group and cluster for the -CN group) is higher with the -CN anchoring group. Further analysis showed that an increase in the number of -CN groups from one to three within the junctions leads to a decrease in conductance while increasing the size of the cluster. This demonstrates the significant effects of different anchoring groups and the impact of varying the number of -CN groups on both the charge transport and cluster formation. This study highlights the importance of selecting the appropriate anchoring group in the design of molecular junctions. Additionally, controlling the size and formation of clusters can be a strategic approach to engineering charge transport in molecular junctions.

RESUMEN

Microplastics and its putative adverse effects on environmental and human health increasingly gain scientific and public attention. Systematic studies on the effects of microplastics are currently hampered by using rather poorly characterised particles, leading to contradictory results for the same particle type. Here, surface properties and chemical composition of two commercially available nominally identical polystyrene microparticles, frequently used in effect studies, were characterised. We show distinct differences in monomer content, ζ-potentials and surface charge densities. Cells exposed to particles showing a lower ζ-potential and a higher monomer content displayed a higher number of particle-cell-interactions and consequently a decrease in cell metabolism and proliferation, especially at higher particle concentrations. Our study emphasises that no general statements can be made about the effects of microplastics, not even for the same polymer type in the same size class, unless the physicochemical properties are well characterised.

Asunto(s)

Microplásticos , Contaminantes Químicos del Agua , Comunicación Celular , Monitoreo del Ambiente , Humanos , Plásticos/toxicidad , Poliestirenos/análisis , Contaminantes Químicos del Agua/análisis

RESUMEN

Stimuli responsive polymer coatings are a common motive for designing surfaces for cell biological applications. In the present study, we have characterized temperature dependent adhesive properties of poly(N-isopropylacrylamide) (PNIPAm) microgel coated surfaces (PMS) using various atomic force microscopy based approaches. We imaged and quantified the material properties of PMS upon a temperature switch using quantitative AFM imaging but also employed single-cell force spectroscopy (SCFS) before and after decreasing the temperature to assess the forces and work of initial adhesion between cells and PMS. We performed a detailed analysis of steps in the force-distance curves. Finally, we applied colloid probe atomic force microscopy (CP-AFM) to analyze the adhesive properties of two major components of the extracellular matrix to PMS under temperature control, namely collagen I and fibronectin. In combination with confocal imaging, we could show that these two ECM components differ in their detachment properties from PNIPAm microgel films upon cell harvesting, and thus gained a deeper understanding of cell-sheet maturation and harvesting process and the involved partial ECM dissolution.

Asunto(s)

Resinas Acrílicas/química , Adhesión Celular , Geles/química , Animales , Colágeno Tipo I/química , Colágeno Tipo I/metabolismo , Perros , Matriz Extracelular/química , Matriz Extracelular/metabolismo , Fibronectinas/química , Fibronectinas/metabolismo , Oro/química , Células de Riñón Canino Madin Darby , Microscopía de Fuerza Atómica , Propiedades de Superficie , Temperatura

RESUMEN

We report the synthesis, transport measurements, and electronic structure of conjugation-broken oligophenyleneimine (CB-OPI 6) molecular wires with lengths of ∼4 nm. The wires were grown from Au surfaces using stepwise aryl imine condensation reactions between 1,4-diaminobenzene and terephthalaldehyde (1,4-benzenedicarbaldehyde). Saturated spacers (conjugation breakers) were introduced into the molecular backbone by replacing the aromatic diamine with trans-1,4-diaminocyclohexane at specific steps during the growth processes. FT-IR and ellipsometry were used to follow the imination reactions on Au surfaces. Surface coverages (∼4 molecules/nm(2)) and electronic structures of the wires were determined by cyclic voltammetry and UV-vis spectroscopy, respectively. The current-voltage (I-V) characteristics of the wires were acquired using conducting probe atomic force microscopy (CP-AFM) in which an Au-coated AFM probe was brought into contact with the wires to form metal-molecule-metal junctions with contact areas of ∼50 nm(2). The low bias resistance increased with the number of saturated spacers, but was not sensitive to the position of the spacer within the wire. Temperature dependent measurements of resistance were consistent with a localized charge (polaron) hopping mechanism in all of the wires. Activation energies were in the range of 0.18-0.26 eV (4.2-6.0 kcal/mol) with the highest belonging to the fully conjugated OPI 6 wire and the lowest to the CB3,5-OPI 6 wire (the wire with two saturated spacers). For the two other wires with a single conjugation breaker, CB3-OPI 6 and CB5-OPI 6, activation energies of 0.20 eV (4.6 kcal/mol) and 0.21 eV (4.8 kcal/mol) were found, respectively. Computational studies using density functional theory confirmed the polaronic nature of charge carriers but predicted that the semiclassical activation energy of hopping should be higher for CB-OPI molecular wires than for the OPI 6 wire. To reconcile the experimental and computational results, we propose that the transport mechanism is thermally assisted polaron tunneling in the case of CB-OPI wires, which is consistent with their increased resistance.