RESUMEN

Photodetectors converting light into electrical signals are crucial in various applications. The pursuit of high-performance photodetectors with high sensitivity and broad spectral range simultaneously has always been challenging in conventional semiconductor materials. Graphene, with its zero bandgap and high electron mobility, is an attractive candidate, but its low light absorption coefficient restricts its practical application in light detection. Integrating graphene with light-absorbing materials like PbS quantum dots (QDs) can potentially enhance its photodetection capabilities. Here, this work presents a broadband photodetector with enhanced sensitivity based on a graphene-PbS QD heterostructure. The device leverages the high carrier mobility of graphene and the strong light absorption of PbS QDs, achieving a wide detection range from ultraviolet to near-infrared. Employing a simple spinning method, the heterostructure demonstrates ultrahigh responsivity up to the order of 107 A/W and a specific detectivity on the order of 1013 Jones, showcasing significant potential for photoelectric applications.

RESUMEN

The green production of nanocomposites holds great potential for the development of new materials. Graphene is an important class of carbon-based materials. Despite its high carrier mobility, it has low light absorption and is a zero-bandgap material. In order to tune the bandgap and improve the light absorption, S, N co-doped low-dimensional C/C nanocomposites with polymer and graphene oxide nanoribbons (the graphene oxide nanoribbons were prepared by open zipping of carbon nanotubes in a previous study) were synthesized by one-pot carbonization through dimensional-interface and phase-interface tailoring of nanocomposites in this paper. The resulting C/C nanocomposites were coated on untreated A4 printing paper and the optoelectronic properties were investigated. The results showed that the S, N co-doped C/C nanoribbon/carbon dot hybrid exhibited enhanced photocurrent signals of the typical 650, 808, 980, and 1064 nm light sources and rapid interfacial charge transfer compared to the N-doped counterpart. These results can be attributed to the introduction of lone electron pairs of S, N elements, resulting in more transition energy and the defect passivation of carbon materials. In addition, the nanocomposite also exhibited some electrical switching response to the applied strain. The photophysical and doping mechanisms are discussed. This study provides a facile and green chemical approach to prepare hybrid materials with external stimuli response and multifunctionality. It provides some valuable information for the design of C/C functional nanocomposites through dimensional-interface and phase-interface tailoring and the interdisciplinary applications.

RESUMEN

Two-dimensional transition metal carbides/nitrides (MXenes) have aroused widespread interest in the field of microwave absorption because of their unique layered structures. However, the inherent aggregation, poor impedance matching, and low chemical stability of MXenes inevitably obstruct their practical applications. Herein, a multichamber Fe3O4/Ti3C2Tx@reduced graphene oxide (FT@RGO) hierarchical structure was constructed through self-assembly and sacrificial template strategies where the Ti3C2Tx nanosheets were assembled into hollow microspheres that were decorated with Fe3O4 nanospheres and wrapped by RGO nanosheets. The massive heterointerfaces and interior cavities favor enhanced microwave absorption performance via interfacial polarization, multiple scattering/reflections, and dielectric-magnetic synergistic effects. Consequently, the synthesized ultralight FT@RGO foam (0.009 g/cm3) presents superior microwave absorption ability with the minimum reflection loss of -50.5 dB at the matching thickness of 2.5 mm and effective absorption bandwidth of 8.0 GHz covering the frequency range of 10.0-18.0 GHz at the thickness of 2 mm. Furthermore, the encapsulation of hollow Ti3C2Tx spheres by RGO nanosheets avoids direct contact with external air, which considerably improves the stability of Ti3C2Tx and ensures the long-term application of FT@RGO foam in a conventional environment. This work provides a reference for the structural design of MXene-based materials as broadband and durable microwave absorbers.

RESUMEN

With their fascinating properties, emerging two-dimensional (2D) materials offer innovative ways to prepare high-performance infrared (IR) detectors. However, the current performance of 2D IR photodetectors is still below the requirements for practical application owing to the severe interfacial recombination, sharply raised contact resistance, and deteriorated metal conductivity at nanoscale. Here, we introduce a vertical barrier heterojunction with a structure of PtSe2/GaAs that combines the excellent optoelectronic properties of transition metal sulfides with topological semi-metals, which allows for an adjustable bandgap and high carrier mobility. The heterojunction was fabricated using the wet transfer method. The heterostructures show significant rectification behaviors and photovoltaic effects, which allow it to operate as a self-driven photodetector at zero bias. The photoresponse parameters at 850 nm with zero bias voltage are 67.2 mA W-1, 6.7 × 1012 Jones, 9.8%, 3.8 × 105, 164 µs, and 198 µs for the responsivity, specific detectivity, external quantum efficiency, Ilight/Idark ratio, rise time, and fall time, respectively. Moreover, the heterojunction is highly sensitive to a wide spectral band from ultraviolet to near-infrared (360-1550 nm). At the same time, this heterostructure demonstrates significant potential for applications in IR polarized light detection and room-temperature high-resolution IR imaging. The excellent properties of the heterojunction make it well-suited for high-performance, self-powered IR detection.

RESUMEN

The ability to detect the polarization information of light is often crucial for various applications in optical systems. However, conventional polarization-sensitive photodetectors struggle to simultaneously achieve a wide band coverage and high-precision detection, severely hindering the development of polarization detectors. In this study, a reflective metasurface with full-Stokes detection capabilities over a wide range is proposed. It integrates four linear polarization filters and two circular polarization filters operating in the near-infrared region. By dynamically adjusting the refractive index of the liquid crystal covering the detector surface, high performance full-Stokes parameter detection can be achieved between 730-770 nm with detection error below 0.07. Therefore, this study provides a design approach for the potential application of Stokes polarization detection over a broadband spectrum.

RESUMEN

Broadband photodetectors that can decipher the wavelength (λ) and intensity (I) of an unknown incident light are urgently demanded. Photothermoelectric (PTE) detectors can achieve ultrabroadband photodetection surpassing the bandgap limitation; however, their practical application is severely hampered by the lack of deciphering strategy. In this work, we report a variable elimination method to decipher λ and I of the incident lights based on an integrated Ag2Se film-based PTE detector. Nanostructured Ag2Se films with controlled thickness are synthesized using an ion sputtering of Ag and a room-temperature selenization method and then assembled into a detector. Under identical illumination, Ag2Se films of different thicknesses produce varying output photothermal voltages, influenced by factors including λ. By establishing a direct relationship between the photothermal voltage and the absorption of Ag2Se films of varied thickness, we successfully eliminate variables independent of λ, thus determining λ. Subsequently, I is determined by the calibrated responsivity relationship using obtained λ. Our PTE detector achieves a broadband spectrum from 400 to 950 nm and high accuracy, with deviations as low as ∼2.63 and ∼0.53% for deciphered λ and I, respectively. This method allows for self-powered broadband decipherable photodetection without a complex device architecture or computational assistance, which could boost the research enthusiasm and promote the commercialization of PTE broadband detectors.

RESUMEN

The construction of stable and efficient nanocomposites with low addition and light weight has always been the goal pursued in the field of electromagnetic wave (EMW) absorption. In this study, the Co@CNTs nanocomposites with Co nanoparticles (13 nm) nanoconfined in the carbon nanotube (CNT) are successfully synthesized by a simple hydrothermal method and phenolic assisted pyrolysis method. The degree of graphitization of CNTs and the microstructure of Co nanoparticles can be effectively regulated by controlling the calcination temperature. The sample calcined at 700 °C can obtain excellent absorption performance at a low filling capacity of 10 wt.%: the minimum reflection loss (RL) is -41.2 dB and the effective absorption bandwidth (EAB) reaches a maximum width of 14.2 GHz. When the sample thickness is only 2.2 mm, the EAB of <-20 dB reaches 8.3 GHz, which is the maximum EAB of most current Co-based absorbers. In particular, the polarization and ferromagnetic coupling behaviors are elucidated in depth with the aid of electromagnetic field simulations using the High-Frequency Structure Simulator (HFSS). This work provides a new nanoconfinement strategy for constructing the Co@CNTs nanocomposites as lightweight and ultra-broadband absorbing materials for EMW protection and EMW pollution control.

RESUMEN

This work aims to develop and implement a pulse-acquire sequence for three-dimensional (3D) single-voxel localized 13C MRS in humans at 7 T, in conjunction with bilevel broadband 1H decoupling, and to test its feasibility in vitro and in vivo in human calf muscle with emphasis on the detection of glycogen C1-C6. A localization scheme suitable for measuring fast-relaxing 13C signals in humans at 7 T was developed and implemented using the outer volume suppression (OVS) and one-dimensional image selected in vivo spectroscopy (ISIS-1D) schemes, similar to that which was previously reported in humans at 4 T. The 3D 13C localization scheme was followed by uniform 13C adiabatic excitation, all complemented with an option for bilevel broadband 1H decoupling to improve both 13C sensitivity and spectral resolution at 7 T. The performance of the pulse-acquire sequence was investigated in vitro on phantoms and in vivo in the human calf muscle of three healthy volunteers, while measuring glycogen C1-C6. In addition, T1 and T2 of glycogen C1-C6 were measured in vitro at 7 T, as well as T1 of glycogen C1 in vivo. The glycerol C2 and C1,3 lipid resonances were efficiently suppressed in vitro at 7 T using the OVS and ISIS-1D schemes, allowing distinct detection of glycogen C2-C6. While some glycerol remained in calf muscle in vivo, the intense lipid at 130 ppm was efficiently suppressed. The 13C sensitivity and spectral resolution of glycogen C1-C6 in vitro and glycogen C1 in vivo were improved at 7 T using bilevel broadband 1H decoupling. The T1 and T2 of glycogen C1-C6 in vitro at 7 T were consistent compared with those at 8.5 T, while the T1 of glycogen C1 in vivo at 7 T resulted similar to that in vitro. Localized 13C MRS is feasible in human calf muscle in vivo at 7 T, and this will allow further extension of this method for 13C MRS measurements such as in the brain.

RESUMEN

Dewdrops, the droplets of water naturally occurring on leaves and carapaces of insects, are a fascinating phenomenon in nature. Here, a man-made array of dewdrops with arbitrary shapes and arrangements, which can function as an electromagnetic metasurface, is demonstrated. The realization of the dewdrop array is enabled by a surface covered by a tailored pattern of hydrophilic and hydrophobic coatings, where tiny droplets of water can aggregate and form dewdrops on the former. Interestingly, this metasurface made of dewdrops can be modulated by the condensation and evaporation process. By increasing relative humidity and decreasing temperature, the dewdrop metasurface is gradually formed with increasing amounts of water. While the reverse operation can make it completely disappear. This idea is demonstrated through two examples with different functions of dynamically controllable microwave absorption and scattering. The work shows a principle to construct functional electromagnetic devices with dewdrops, as well as a mechanism of dynamic control based on condensation and evaporation, promising unprecedented applications.

RESUMEN

In unmanned aircraft applications, electromagnetic wave (EMW) absorbers suffer from defects in narrow absorption bands and poor mechanical properties. To solve the problems, a lightweight multilayer stealth structure with wide broadband absorption performance and excellent mechanical properties was designed and prepared by adjusting microscopically the number of multi-walled carbon nanotubes (MWCNT) and modulating macroscopically the thickness-matching relationship of the structure to promote the absorption of EMW synergistically. Under the MWCNT of 30 wt% and the depletion layer with the thickness of 0.2 mm, the effective absorption bandwidth (EAB) covers the entire Ku-band while maintaining a minimum reflection loss (RL) of -15 dB. Besides, the radar cross-sectional area attenuation is as high as 23.1 dBm2, as well as the mechanical properties of the radar absorbing structures (RAS) were improved significantly due to the reducing structural density from balsa wood and the enhancement effect of glass fiber mats (GFM). The study constructed balsa-based RAS with excellent EMW absorbing and mechanical properties from both micro-nano scale and macro-structure, providing a research route for designing high-performance and lightweight stealth structures.

Asunto(s)

RESUMEN

The COVID-19 outbreak resulted in an unprecedented surge in telehealth utilization. However, the effects of policy enactment on utilization remain understudied in the literature. Our research examines the impact of policy mandates relating to federal incentive programs on telehealth utilization across states during the pandemic by considering technology infrastructure, such as broadband penetration and equipment possession. This study also considers the impact of political orientation and control factors, including income attributes, on telehealth utilization. Considering telehealth utilization in the Medicare program as a test case, this study employed the partial least square and structural equation model to analyze data from the Centers for Medicare & Medicaid Services, the American Community Survey, and the Microsoft Airband Project to draw inferences. Our study finds that telehealth legislation, broadband penetration, political orientation, and control factors have a direct significant impact on telehealth utilization, whereas incentive programs and equipment possession have an indirect impact through broadband penetration.

RESUMEN

Broadband spectrum detectors exhibit great promise in fields such as multispectral imaging and optical communications. Despite significant progress, challenges like materials instability in such devices, complex manufacturing process, and high cost still hinder their further application. Here, we present a method that achieves broadband spectral detection by impurity-level in SrSnO3. We report over 500 mA/W photoresponsivity at 275 nm (ultraviolet C solar-bind) and 367 nm (ultraviolet A) and ∼60 mA/W photoresponsivity at 532 and 700 nm (visible) with a voltage bias of -5 V. Further transport and photoluminescence results reveal a new phase transition at 88 K, which would significantly affect the impurity level of the La-doped SrSnO3 film, indicating that the broadband response attributes to the impurity levels and mutual interactions. Additionally, the photodetector demonstrates excellent robustness and stability under repeated tests and prolonged exposure in air. These findings show the potential of SrSnO3 as a material for photodetectors and propose a method to achieve broadband spectrum detection, creating new possibility for the development of single-phase, low-cost, simple structure, and high-efficiency photodetectors.

RESUMEN

Eu2+-doped near-infrared (NIR) emitting phosphors, known for their high efficiency, broadband emission and spectral tunability, have gained much attention. However, achieving efficient NIR emission based on Eu2+ remains a challenge due to the co-existence of Eu3+, especially in materials (i.e. garnets and apatites) containing trivalent lanthanide cations. In this study, a Eu2+ doped sulfureted NIR-emitting garnet phosphor Ca3(Sc, Eu)2Si3(O, S)12: Eu2+ is successfully designed and synthesized. Notably, a strategy for regulating the initial valence state of dopants is proposed by using prepared EuS instead of the conventional Eu2O3 as raw material, enhancing the NIR emission by 135 %. Moreover, a sulfuration strategy is further introduced to enhance the NIR-emitting intensity and internal quantum efficiency by 192 % and 167.8 %, and to improve thermal stability by 154 % at 120 °C. The luminescence origin of the unusual broadband NIR emission is re-examined through chemical unit co-substitution strategy by introducing [Al3+Hf4+] to replace [Sc3+Si4+] ion pairs. Meanwhile, the spectral regulation and the performance optimization mechanism are systematically discussed. Finally, a green light pumped NIR LED device with a photoelectric efficiency of 9.43 %@100 mA and output power of 22.74 mW@100 mA is fabricated, showing remarkable potential in nondestructive testing and biomedical imaging applications.

RESUMEN

The "Broadband China" has enabled China to achieve leapfrog development in the construction of its high-speed broadband networks, thereby accelerating the development of digital infrastructure and unleashing the potential for financial sector growth. This has created a strong impetus for economy to shift towards high-quality development. An in-depth understanding of the empirical correlation between the development of digital infrastructure and financial progress is absent, leaving an unexplored domain of research concerning the impact of the "Broad China" strategy on financial agglomeration (Finagg), financial scale (Finscal), and digital finance (Digfina). In order to evaluate the dynamic impacts of this policy on financial development, this research builds a multi-period difference in differences (DID) model using panel data from 269 prefecture-level cities between 2011 and 2020. The study concludes that the "Broadband China" policy significantly fosters the growth of Finagg, Finscal, and Digfina, in China, and found that the "Broadband China" policy has a significant impact on the regional heterogeneity of financial agglomeration and digital finance. There are significant variations in the effects of this policy on different regions, while the regional heterogeneity differences in the impact on financial scale are relatively small. Additionally, the three mediating variables of technological innovation, fund support, and talent agglomeration play a mediating role in the mechanism of digital infrastructure on financial development.

RESUMEN

The prevalence of rosacea in skin of color (SOC) populations is estimated to be as high as 10% in some countries. Traditionally, intense pulsed light (IPL) and pulsed dye laser (PDL) have been the laser and energy-based devices (EBDs) used to treat rosacea. However, not all laser and EBDs are safe for SOC (Fitzpatrick skin types IV-VI) due to increased absorption of energy in pigmented skin and increased risk of post-inflammatory hyperpigmentation and scarring. This review summarizes the use of the top seven laser and EBDs for treating rosacea in SOC.

Asunto(s)

RESUMEN

In optical materials, the development of absorbers for a wide spectrum is a focal point of research. A pivotal challenge lies in ensuring the stability and durability of optical absorbers, particularly at elevated temperatures. This study introduces a novel approach to creating absorbers with diverse colors, focusing on the synthesis and properties of black crystal wires. In contrast to black gold nanoparticle (Au NP) precipitates, which change color within hours under similar conditions, the method involves strategically trapping Au NPs within defects during the growth of single crystals. This results in black crystal wires that not only exhibit broadband absorption but also maintain exceptional stability even under prolonged exposure to high temperatures. The method also involves the controlled synthesis of colorless and red crystal wires. As a proof of concept, these stable black Au crystal wires demonstrate superior performance in photothermal conversion applications. The methodology, derived from the crystal growth process, presents a defect template that offers a novel approach to material design. Furthermore, these unique crystals, available in various colors, hold significant promise for a range of unexplored applications.

RESUMEN

Near-infrared (NIR) emitting phosphors draw much attention because they show great applicability and development prospects in many fields. Herein, a series of inverse spinel-type structured LiGa5O8 phosphors with a high concentration of Cr3+ activators is reported with a dual emission band covering NIR-I and II regions. Except for strong ionic exchange interactions such as Cr3+-Cr3+ and Cr3+ clusters, an intervalence charge transfer (IVCT) process between aggregated Cr ion pairs is proposed as the mechanism for the ~1210 nm NIR-II emission. Comprehensive structural and luminescence characterization points to IVCT between two Cr3+ being induced by structural distortion and further enhanced by irradiation. Construction of the configurational energy level diagram enabled elucidation of this transition within the IVCT process. Therefore, this work provides insight into the emission mechanism within the high Cr3+ concentration system, revealing a new design strategy for NIR-II emitting phosphors to promote its response.

RESUMEN

The intrinsic low-symmetry crystal structures or external geometries of low-dimensional materials are crucial for polarization-sensitive photodetection. However, these inherently anisotropic materials are limited in variety, and their anisotropy is confined to specific crystal directions. Transforming 2D semiconductors, such as WSe2, from isotropic 2D nanosheets into anisotropic 1D nanoscrolls expands their application in polarization photodetection. Despite this considerable potential, research on polarization photodetection based on nanoscrolls remains scarce. Here, the uniform crystalline orientation of WSe2 nanoscrolls is achieved conveniently and efficiently by applying ethanol droplets to vapor deposition-grown bilayer WSe2 nanosheets. Angle-resolved polarized Raman spectroscopy of WSe2 nanoscrolls demonstrates vibrational anisotropy. Photodetectors based on these nanoscrolls show competitive overall performance with a broadband detection range from 405 to 808 nm, a competitive on/off ratio of ≈900, a high detectivity of 3.4 × 108 Jones, and a fast response speed of ≈30 ms. Additionally, WSe2 nanoscroll-based photodetectors exhibit strong polarization-sensitive detection with a maximum dichroic ratio of 1.5. More interestingly, due to high photosensitivity, the WSe2 nanoscroll detectors can easily record sequential puppy images. This work reveals the potential of WSe2 nanoscrolls as excellent polarization-sensitive photodetectors and provides new insights into the development of high-performance optoelectronic devices.

RESUMEN

Nitrogen-vacancy (NV) centers in diamond have emerged as promising quantum sensors due to their highly coherent and optically addressable spin states with potential applications in high-sensitivity magnetometry. Homogeneously addressing large ensembles of NV centers offers clear benefit in terms of sensing precision as well as in fundamental studies of collective effects. Such experiments require a spatially uniform, intense, and broadband microwave field that can be difficult to generate. Previous approaches, such as copper wires, loop coils, and planar structures, have shown limitations in field homogeneity, bandwidth, and integration in compact devices. In this paper, we present a coplanar waveguide (CPW) gold coil patterned on a 3 × 3 mm 2 diamond substrate, offering full integration, enhanced stability, and broad bandwidth suitable for various NV sensing applications. Coil fabricated on diamond offers several advantages for magnetometry with NV centers ensemble, including enhanced heat dissipation, seamless integration, scalability, and miniaturization potential. We optimize critical geometrical parameters to achieve a homogeneous magnetic field with a coefficient of variation of less than 6% over an area of 0.5 mm 2 and present experimental results confirming the performance of the proposed CPW coil.

In recent years, there has been significant interest in using nitrogen-vacancy (NV) centers in diamond as quantum sensors for high-sensitivity magnetometry. These NV centers, particularly the negatively charged ones, offer promising applications due to their coherent spin states that can be manipulated using microwave fields and optically detected magnetic resonance techniques. However, to improve measurement precision and signal-to-noise ratio, it's advantageous to address large ensembles of NV centers, which requires a spatially uniform, intense, and broadband microwave field. Various methods, such as copper wires, loop coils, and planar structures, have been explored to achieve this, but with limited capability. To address their limitations, a coplanar waveguide (CPW) gold coil patterned on a CVD diamond substrate is proposed. This design offers a highly homogeneous magnetic field, full integration with the diamond substrate, scalability, miniaturization, and efficient heat dissipation, making it a promising solution for NV magnetometry applications. Experimental results confirm its performance, making it a remarkable advancement in this area.

RESUMEN

The broadband scientific echosounder is considered to have great potential for zooplankton monitoring. In this study, two common types of zooplankton in the South China Sea, Rhopilema hispidum and Acetes chinensis, were continuously monitored using a broadband scientific echosounder. The results revealed distinct volume scattering strength (SV) spectral characteristics between the echoes of R. hispidum and A. chinensis. Meanwhile, echoes of R. hispidum and A. chinensis were classified using the k-means clustering algorithm, achieving an 83.4% accuracy rate. The SV value at a nominal frequency of R. hispidum changes more sharply than that of A. chinensis, suggesting that the density of R. hispidum changes more dramatically. This study demonstrates the advantages of monitoring R. hispidum and A. chinensis outbreaks with a broadband scientific echosounder.

Asunto(s)