RESUMEN

This study aimed to incorporate pistachio shell hemicellulose into a film of gelatin and glycerol for the production of biodegradable films. The gelatin and glycerol are chosen because of their functional properties, which make it extensively used in food industry. The film composition was defined after a statistical optimization by central composite face-centered design and response surface methodology. The hemicellulose/gelatin ratio of 35.93% and the glycerol ratio of 18.02% were the optimum conditions to obtain lower film water solubility, higher tensile strength, and elongation at break values. The physical, structural, mechanical, and barrier properties of the developed hemicellulose-gelatin film were analyzed and compared with those of the gelatin film. Tensile strength and film water solubility values were reduced significantly with hemicellulose incorporation from 20.41 to 16.64 MPa and 49.57 to 39.21%, respectively, while EB was enhanced by 4.34 times. In addition, hemicellulose incorporation enhanced the water vapor permeability and the film degradation in the soil. The films were also examined by Fourier transform infrared spectroscopy and differential scanning calorimetry. The novelty of this study is to use pistcahio shell hemicellulose in the production of an edible film for the first time. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-024-05968-4.

RESUMEN

The effect of plasticizers, namely glycerol, sorbitol, and citric acid, on the structural and mechanical properties of biodegradable films obtained from xanthan gum (XG) and starch was studied. The plasticizing effect of glycerol, sorbitol, and citric acid on XG-starch films is justified by the destruction of intermolecular contacts between starch and XG macromolecules and the redistribution of hydrogen bonds in the system as a result of the hydrotropic action of plasticizer molecules. The use of glycerol proved to be the most effective for regulating the deformation of films, while the use of sorbitol to preserve strength. The dependence of the film roughness on the type and concentration of plasticizers was characterized. The smallest values of protrusions on the surface of XG-starch films were found in the presence of sorbitol. Considering the effect of the concentration of plasticizers on the stickiness of the surface of XG-starch films and their structural and mechanical properties, 1.5 % concentration of glycerol, sorbitol and citric acid was determined as optimal.

RESUMEN

The application of novel insect proteins as future food resources in the food field has attracted more and more attention. In this study, a biodegradable antibacterial food packaging material with beneficial mechanical properties was developed using Tenebrio molitor larvae protein (TMP), chitosan (CS) and propolis ethanol extract (PEE) as raw materials. PEE was uniformly dispersed in the film matrix and the composite films showed excellent homogeneity and compatibility. There are strong intermolecular hydrogen bond interactions between CS, TMP, and PEE in the films, which exhibit the structure characteristics of amorphous materials. Compared with CS/TMP film, the addition of 3 % PEE significantly enhanced the elongation at break (34.23 %), water vapor barrier property (22.94 %), thermal stability (45.84 %), surface hydrophobicity (20.25 %), and biodegradability of the composite film. The composite film has strong antioxidant and antimicrobial properties, which were enhanced with the increase of PEE content. These biodegradable films offer an eco-friendly end-of-life option when buried in soil. Composite films can effectively delay the spoilage of strawberries and extend the shelf life of strawberries. Biodegradable active packaging film developed with insect protein and chitosan can be used as a substitute for petroleum-based packaging materials, and has broad application prospects in the field of fruits preservation.

Asunto(s)

RESUMEN

In this work, the modification of poly(butylene adipate-co-terephthalate) (PBAT) was combined with the development of active packaging films. PBAT, starch, plasticizer, and tea polyphenols (TP) were compounded and extrusion-blown into thermoplastic starch (TPS)/PBAT-TP active films. Effects of TPS contents on physicochemical properties, functional activities, biodegradability, and release kinetics of PBAT-based active films were explored. Starch interacted strongly with TP through hydrogen bonding and induced the formation of heterogeneous structures in the films. With the increase in TPS contents, surface hydrophilicity and water vapor permeability of the films increased, while mechanical properties decreased. Blending starch with PBAT greatly accelerated degradation behavior of the films, and the T30P70-TP film achieved complete degradation after 180 days. As TPS contents increased, swelling degree of the films increased and TP release were improved accordingly, resulting in significantly enhanced antioxidant and antimicrobial activities. This work demonstrated that filling starch into PBAT-based active films could achieve different antioxidant and antimicrobial activities of the films by regulating film swelling and release behavior.

Asunto(s)

RESUMEN

The demand for UV-protective and biodegradable packaging materials has been increasing with greater awareness about environmental sustainability and human safety. In this work, the effect of incorporating riceberry phenolic extract (RPE) as well as combined RPE and green synthesized biogenic nano­silver (RPE-NS, into Tara gum/PVA (TP)-based matrix was evaluated on the physical, mechanical, functional, biocompatible and biodegradable attributes of the resultant composite films. Integration of RPE (2 wt%) and RPE-NS (0.8 wt%) resulted in nanocomposite (TP/RPE-NS) film with improved physical properties relative to the plain TP and TP/RPE films. The TP/RPE-NS film displayed a compact structure and homogenous distribution of the nano­silver. Increased molecular interactions, crystallinity and thickness was also observed for the nanocomposite film. Compared to plain TP film, TP/RPE-NS film exhibited improved water vapor barrier properties and surface hydrophobicity due to the extract and nanoparticles. The tensile strength and elongation-at-break of TP/RPE-NS were markedly higher (41.76 MPa and 37.40 %) compared to that of plain TP film (36.07 MPa and 20.80 %). Whereas TP/RPE film provided good UV protection (UPF value of 31.85) compared to the minimal protection by TP film (UPF value of 2.72), combination of RPE/RPE-NS ensured that TP/RPE-NS availed an excellent UV-barrier performance (UPF value of 61.09). Furthermore, TP/RPE-NS film exhibited significant antioxidant activity relative to TP film. Besides, all TP-based films were found to be compatible with rat erythrocytes and biodegradable. Taken together, these findings indicate that TP/RPE-NS holds good potential for the development of UV-protective and biodegradable packaging material.

Asunto(s)

RESUMEN

This research was undertaken to assess the effect of tragacanth gum-chitin nanofiber (TG-CNF) film containing free (CEO) or encapsulated cumin essential oil (CNE) combined with oxygen absorber (OA) packaging on the shelf-life of ready-to-cook (RTC) turkey breast burgers during chilled storage. The experimental groups were OA and TG-CNF as single treatments, TG-CNF + CEO, TG-CNF + CNE, and TG-CNF + OA as binary treatments, TG-CNF + CEO + OA and TG-CNF + CNE + OA as ternary treatments, and control. The samples were stored at 3°C for 20 days and analyzed for microbial, physicochemical, and sensory attributes. Binary treatments, when compared to single treatments, and ternary treatments, when compared to binary treatments, exhibited enhanced effectiveness in managing microbial growth, hindering physicochemical alterations, and decelerating sensory alterations. At day 20, TG-CNF + CNE + OA group was identified as the most effective group in inhibiting the growth of total mesophilic bacteria (TMB), total psychrophilic bacteria (TSB), and coliforms (final counts were 4.8, 4.16, and ≤1 log CFU/g, respectively), and TG-CNF + CNE + OA and TG-CNF + CEO + OA groups were known as the most effective groups in inhibiting lactic acid bacteria (LAB) (final counts were 4.71 and 5.15 log CFU/g, respectively). Furthermore, the TG-CNF + CNE + OA treatment proved to be the most effective group in reducing the total volatile nitrogen (TVN) (final level was 19.2 mg N/100 g) and thiobarbituric acid reactive substances (TBARS) (final level was 0.119 mg malondialdehyde (MDA)/kg). TG-CNF + CNE + OA and TG-CNF + CEO + OA were the most efficient groups to delay the increasing rate of cooking loss (final values were 23.3% and 24.6%) and pH (final values were 7.01 and 6.99). The sample's shelf-life was 4 days in control and TG-CNF, 8 days in OA and TG-CNF + OA, 12 days in TG-CNF + CEO, 16 days in TG-CNF + CNE and TG-CNF + CEO + OA, and at least 20 days in TG-CNF + CNE + OA. As a result, the incorporation of TG-CNF + CNE alongside OA packaging emerges as a highly effective active packaging method for preserving RTC turkey breast burgers during chilled storage.

RESUMEN

Polyvinyl alcohol (PVA)-bacterial succinoglycan (SG) biodegradable films were developed through a solvent-casting method. Effects of the PVA/SG ratio on the thickness, transmittance, water holding capacity, and structural and mechanical properties were investigated by various analytical methods. All the prepared films were transparent and uniform, and XRD and FTIR analyses confirmed that PVA was successfully incorporated into SG. The films also showed excellent UV-blocking ability: up to close to 80% with increasing SG concentration. The formation of effective intermolecular interactions between these polymers was evidenced by their high tensile strength and moisture transport capacity. By measuring the biodegradation rate, it was confirmed that films with high SG content showed the fastest biodegradation rate over 5 days. These results confirm that PVA/SG films are eco-friendly, with both excellent biodegradability and effective UV-blocking ability, suggesting the possibility of industrial applications as a packaging material in various fields in the future.

RESUMEN

Petroleum-based packaging materials are nondegradable and unsustainable and thus are harmful to the environment. Renewable packaging films prepared from bio-based raw materials are promising alternatives to petroleum-based packaging materials. In this study, colorless and transparent bio-based films were successfully cast using a solution containing a mixture of arabinogalactan (AG) and poly (vinyl alcohol) (PVA). Vanillin was incorporated into the mixture to endow the films with UV-shielding, antioxidant, and antibacterial properties. The morphological, physical, antioxidant, and antibacterial properties of the blend films were then characterized. At an AG:PVA weight ratio of 1:3, and the vanillin content was 0.15 %, the tensile strength of the AG/PVA/Vanillin (APV) films reached ~28 MPa, while their elongation at break reached ~475 %. The addition of vanillin significantly affected the antioxidant and antibacterial properties of the blend films, which exhibited superb UV barrier capacity. The APV films exhibited extremely low oxygen transmittance, delaying the onset of mold/rot in strawberries and reducing their weight loss. Because of the heat sealability of the blend films, they can be used for encapsulating various substances, such as concentrated laundry liquid. Moreover, the blend films were recyclable and biodegradable. Thus, these films have great potential for applications that require sustainable packaging.

Asunto(s)

RESUMEN

Oxidative rancidity of food products and massive consumption of plastic packaging have put the necessity in manufacturing novel antioxidant biodegradable packaging films. A comprehensive investigation was conducted on starch/poly(butylene adipate-co-terephthalate) (PBAT) antioxidant blown films, in which starch acted as a gatekeeper for the controlled release of propyl gallate (PG). PG was well integrated into the matrices and bound to starch molecules by hydrogen bonding. All films showed strong anti-ultraviolet performance, and higher oxygen barrier than the traditional polyethylene film. Increasing starch proportions promoted the swelling of films and the release of PG, thereby causing higher antioxidant activity at the same contact time to free radical solutions. Similar polarity made PG prone to partition and rapid migration into the food simulants with higher ethanol concentration and the high-fat-content peanut butter. The film with 20:80 w/w starch/PBAT proportion and 3% w/w PG content effectively suppressed the oxidation of peanut butter within 300-day storage. Findings demonstrated this strategy for manufacturing starch/PBAT antioxidant films as a long-term active packaging in food industry.

Asunto(s)

RESUMEN

Biodegradable plastic films have emerged as a substitute for conventional plastic films. Nevertheless, responses of plant-associated microbiomes to the application of biodegradable film mulching at field scale have received little attention. A field experiment was conducted to assess the influence of different film mulching treatments on various microbial attributes and nitrogen (N) cycling functional genes in bulk and rhizosphere soils. Biodegradable film mulching raised the bacterial Shannon index in bulk soils but not in rhizosphere soils. Biodegradable film mulching has led to an increase in the complexity and connectivity of microbial networks, as well as an enhancement in the positive association among microorganisms owing to raised soil nutrients and increased crop biomass. In biodegradable film-treated soils, both bacterial and fungal communities were primarily influenced by stochastic processes associated with dispersal limitation. Moreover, conventional plastic film mulching increased denitrification, anammox, N fixation, and dissimilatory nitrate-reduction (DNRA) gene abundance in bulk soils. In rhizosphere soils, biodegradable film mulching reduced nitrification, denitrification, anammox, N fixation, and DNRA gene abundance. Furthermore, keystone genera (e.g., Nitrosospira, Truepera, Adhaeribacter, Opitutus, and Fusarium) were affected by edaphic variables, contributing to decreased N-cycling gene abundance in biodegradable film-treated soils. Collectively, biodegradable film mulching transformed soil microbiome assembly and functional adaptation, and soil nutrient availability and plant biomass were the critical factors influencing the microbial community. These findings present a novel perspective on the diverse impacts of biodegradable and conventional film mulching on soil microbiome and N-cycling processes.

Asunto(s)

RESUMEN

Using biodegradable films as a substitute for conventional polyolefin films has emerged as a crucial technology to combat agricultural white pollution. To address the shortcomings in the tensile strength, water vapor barrier properties, and degradation period of PBAT-based biodegradable films, this investigation aimed to create a composite film that could improve the diverse properties of PBAT films. To achieve this, a PBAT/PLA-PPC-PTLA ternary blend system was introduced in the study. The system effectively fused PBAT with PLA and PPC, as evidenced by electron microscopy tests showing no apparent defects on the surface and cross-section of the blended film. The developed ternary blend system resulted in a 58.62% improvement in tensile strength, a 70.33% enhancement in water vapor barrier properties, and a 30-day extension of the functional period compared to pure PBAT biodegradable films. Field experiments on corn crops demonstrated that the modified biodegradable film is more suitable for agricultural production, as it improved thermal insulation and moisture retention, leading to a 5.45% increase in corn yield, approaching the yield of traditional polyolefin films.

RESUMEN

This study presents a novel packaging film based on whey protein isolate/κ-carrageenan (WC) with red grape pomace anthocyanins (RGA) to investigate its impact on some qualitative attributes of emergency food bars (EFBs) for 6 months at 38°C. Increasing the RGA dose in WC films from 5% (WCA5) to 10% (WCA10) reduced hydrogen bonding between polymers and polymer homogeneity in the matrix according to FTIR and SEM. Tensile strength slightly declined in WCA5 from 7.47 ± 0.26 to 6.97 ± 0.12, while elongation increased from 27.74 ± 1.36 to 32.36 ± 1.25% compared to WC film. The maximum weight loss temperature (TM) increased by incorporating 5 wt% RGA from 182.95°C to 244.36°C, whereas TM declined to 187.19°C in WCA10 film. WVP and OTR slightly changed in WCA5 (from 7.83 ± 0.07 and 2.57 ± 0.18 to 8.41 ± 0.03 g H2O.m/m2.Pa.s × 10-9 and 1.79 ± 0.32 cm3 O2/m2.d.bar, respectively), but significantly impaired in WCA10 compared to WC film. WCA5 and WCA10 films had high AA%, 68.77%, and 79.21%, respectively. WCA10 film presented great antimetrical properties against Staphylococcus aureus with an inhibition zone of 6.00 mm. The light transmission of RGA-contained films in the UV spectrum was below 10%. The WCA5 film effectively restrained moisture loss and hardness increment until the end of the storage period, which were 14.33% and 28.76%, respectively, compared to day 0. Antioxidant films provided acceptable resistance against oxidation to EBF treatment. Sensory panels scored WCA5 and WCA10 higher in overall acceptance with 5.64 and 5.40 values, respectively, while complaining about the hardness of OPP treatment. The results of this investigation demonstrated that incorporating RGA, preferably 5 wt%, into WC-based film effectively improved the qualitative properties of EFB during the 6-month shelf life. This film might be a promising alternative for packaging light and oxygen-sensitive food products.

RESUMEN

Graphene oxide nanosheet (GO) is a multifunctional platform for binding with nanoparticles and stacking with two dimensional substrates. In this study, GO nanosheets were sonochemically decorated with zinc oxide nanoparticles (ZnO) and self-assembled into a hydrogel of GO-ZnO nanocomposite. The GO-ZnO hydrogel structure is a bioinspired approach for preserving graphene-based nanosheets from van der Waals stacking. X-ray diffraction analysis (XRD) showed that the sonochemical synthesis led to the formation of ZnO crystals on GO platforms. High water content (97.2%) of GO-ZnO hydrogel provided good property of ultrasonic dispersibility in water. Ultraviolet-visible spectroscopic analysis (UV-vis) revealed that optical band gap energy of ZnO nanoparticles (∼3.2 eV) GO-ZnO nanosheets (∼2.83 eV). Agar well diffusion tests presented effective antibacterial activities of GO-ZnO hydrogel against gram-negative bacteria (E. coli) and gram-positive bacteria (S. aureus). Especially, GO-ZnO hydrogel was directly used for brush painting on biodegradable polylactide (PLA) thin films. Graphene-based nanosheets with large surface area are key to van der Waals stacking and adhesion of GO-ZnO coating to the PLA substrate. The GO-ZnO/PLA films were characterized using photography, light transmittance spectroscopy, coating stability, scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopic mapping (EDS), antibacterial test and mechanical tensile measurement. Specifically, GO-ZnO coating on PLA substrate exhibited stability in aqueous food simulants for packaging application. GO-ZnO coating inhibited the infectious growth ofE. colibiofilm. GO-ZnO/PLA films had strong tensile strength and elastic modulus. As a result, the investigation of antibacterial GO-ZnO hydrogel and GO-ZnO coating on PLA film is fundamental for sustainable development of packaging and biomedical applications.

Asunto(s)

RESUMEN

This study addresses the growing interest in bio-based active food packaging by infusing Lepidium sativum (Garden cress) seeds extract (GRCE) into sodium alginate (SALG) films at varying concentrations (1, 3, and 5 %). The GRCE extract revealed six phenolic compounds, with gallic and chlorogenic acids being prominent, showcasing substantial total phenolic content (TPC) of 139.36 µg GAE/mg and total flavonoid content (TFC) of 26.46 µg RE/mg. The integration into SALG films significantly increased TPC, reaching 30.73 mg GAE/g in the film with 5 % GRCE. This enhancement extended to DPPH and ABTS activities, with notable rises to 66.47 and 70.12 %, respectively. Physical properties, including tensile strength, thickness, solubility, and moisture content, were positively affected. A reduction in water vapor permeability (WVP) was reported in the film enriched with 5 % GRCE (1.389 × 10-10 g H2O/m s p.a.). FT-IR analysis revealed bands indicating GRCE's physical interaction with the SALG matrix, with thermal stability of the films decreasing upon GRCE integration. SALG/GRCE5 effectively lowered the peroxide value (PV) of sunflower oil after four weeks at 50 °C compared to the control, with direct film-oil contact enhancing this reduction. Similar trends were observed in the K232 and K270 values.

Asunto(s)

RESUMEN

The tick Rhipicephalus microplus is a parasite of great importance in cattle breeding. It is responsible for huge economic losses. The application of synthetic acaricides is used as a form of control. However, resistant strains have been selected over the years, making it necessary to search for new alternative formulations. The present study aimed to formulate biodegradable films impregnated with the terpenes carvacrol and thymol and evaluate their efficacy on larvae and adults of R. microplus through in vitro tests. The following formulations were prepared: Film 1 (starch based); Film 2 (based on starch and glycerol); Film 1 + Carvarcol or Thymol; Film 2 + Carvarcol or Thymol. Terpenes had a final concentration of 5.0 mg/mL. To evaluate the formulations on larvae, the immersion test was performed by dividing into six groups according to the concentration of terpenes: 5.0, 2.5, 1.25, 0.625, 0.313, 0.156 mg/mL and the control groups: 1% ethanol solution; 10% ethanol solution; Film 1; and Film 2. For the evaluations on adult ticks, ten experimental groups (n = 10) were used: 1) Carvacrol; 2) Film 1 + Carvacrol; 3) Film 2 + Carvacrol; 4) Thymol; 5) Film 1 + Thymol; 6) Film 2 + Thymol; 7) Distilled water; 8) 10% ethanol solution; 9) Film 1; and 10) Film 2. In experimental groups 1-6, carvacrol and thymol (free or incorporated in two different biodegradable film formulations) were evaluated at the same concentration (5.0 mg/mL). Each group of ticks was immersed in their respective solutions for five minutes. The results of the tests on larvae showed that the Film 1 + thymol and Film 2 + carvacrol formulations had the lowest lethal concentrations (0.076 and 0.255 mg/mL, respectively), values up to 9.0-fold lower than the monoterpenes tested outside the formulation. Carvacrol and thymol at the concentrations tested were effective in controlling engorged females with a percentage of 32.2% and 63.8%, respectively. When incorporated into biodegradable film formulations, these monoterpenes showed much greater efficacy. Film 1 + carvacrol and Film 2 + carvacrol with control percentages of 71.6% and 97.2%, respectively, while the formulations Film 1 + thymol and Film 2 + thymol showed values of 96.9% and 100.0%. The tick control activity of the biopolymer formulations with thymol and carvacrol was demonstrated through the high mortality rates of larvae and engorged females of the tick R. microplus. Therefore, the results obtained indicate that these formulations have great potential for tick control mainly because of the percentage of control up to 100% in engorged females in in vitro tests.

Asunto(s)

RESUMEN

The massive production of food waste and plastic pollution necessitates innovative solutions. This study reports the first fabrication of a flexible chitosan (CH) film reinforced with lignosulfonate (LS) derived from pulping byproduct as a sustainable alternative to synthetic food packaging. The CH/LS composite film was prepared by a simple casting method with varying LS contents of 1 % and 2 %. Compared to CH film, the addition of 2 % LS increased the tensile strength by over 4 times and decreased water vapor permeability by 11 %. Moreover, the CH/LS film exhibited excellent UV-shielding properties. This novel use of LS to reinforce CH film presents an eco-friendly active packaging material. When used to package cherry tomatoes for 2 weeks, the CH/LS film effectively maintained fruit freshness and hardness while minimizing weight loss. This work provides new scientific evidence on the optimized preparation and application of CH/LS composite films from renewable resources for food preservation.

RESUMEN

The use of biostimulants and biofilms in agriculture is constantly increasing, as they may support plant growth and productivity by improving nutrient absorption, increasing stress resilience and providing sustainable alternatives to chemical management practices. In this work, two commercial products based on Trichoderma afroharzianum strain T22 (Trianum P®) and a seaweed extract from Ascophyllum nodosum (Phylgreen®) were tested on industrial tomato plants (Solanum lycopersicum var. Heinz 5108F1) in a field experiment. The effects of single and combined applications of microbial and plant biostimulants on plants grown on two different biodegradable mulch films were evaluated in terms of changes in the metabolic profiles of leaves and berries. Untargeted metabolomics analysis by LC-MS Q-TOF revealed the presence of several significantly accumulated compounds, depending on the biostimulant treatment, the mulch biofilm and the tissue examined. Among the differential compounds identified, some metabolites, belonging to alkaloids, flavonoids and their derivatives, were more abundant in tomato berries and leaves upon application of Trichoderma-based product. Interestingly, the biostimulants, when applied alone, similarly affected the plant metabolome compared to control or combined treatments, while significant differences were observed according to the mulch biofilm applied.

RESUMEN

Chitosan (CT) is extensively applied in developing food packaging films due to its non-toxic, biodegradable, and good film-forming properties. But CT-based single polymer film has issues with poor physico-mechanical, thermal, and light barrier properties. Therefore, this study aimed to incorporate natural berry wax (BYW) at various concentrations (5 %, 10 %, 15 %, 20 %, and 25 %, wt%) into CT to improve the quality characteristics of CT film. The microstructure of the film matrix was effectively proven to be compatible with BYW through the utilization of SEM, XRD, and FTIR spectroscopy. The results demonstrated that the quality parameters of CT/BYW composite film were significantly affected by the increasing concentration of BYW. The integration of BYW with a concentration of 5 % to 20 % to CT substantially improved the film characteristics by reducing moisture content, swelling power, solubility, and water vapor permeability, increasing the film's opacity, thermal stability, and tensile strength as well as enhancing the biodegradable potential. Furthermore, CT/BYW films showed higher thermal stability and UV and visible light resistance compared to pure CT film. Taken together, the CT film with 20 % berry wax showed the best film characteristics and biodegradable potential, which could be promising for enhancing the shelf-life of various food products.

Asunto(s)

RESUMEN

Shrimp, a globally consumed perishable food, faces rapid deterioration during storage and marketing, causing nutritional and economic losses. With a rising environmental consciousness regarding conventional plastic packaging, consumers seek sustainable options. Utilizing natural waste resources for packaging films strengthens the food industry. In this context, we aim to create chitosan-based active films by incorporating Terminalia catappa L. leaves extract (TCE) to enhance barrier properties and extend shrimp shelf life under refrigeration. Incorporation of TCE improves mechanical, microstructural, UV, and moisture barrier properties of the chitosan film due to cross-linking interactions, resulting in robust, foldable packaging film. Active TCE film exhibits high antioxidant property due to polyphenols. These films also exhibited low wettability and showed hydrophobicity than neat CH films which is essential for meat packaging. These biodegradable films offer an eco-friendly end-of-life option when buried in soil. TCE-loaded films effectively control spoilage organisms, prevent biochemical spoilage, and maintain shrimp freshness compared to neat CH films during refrigerated condition. The active TCE film retains sensory attributes better than neat chitosan, aligning with consumer preference. The developed edible and active film from waste sources might offer sustainable, alternative packaging material with a lower carbon footprint than petroleum-based sources.

Asunto(s)

RESUMEN

Film mulching is one of the most important methods to control soil-borne diseases. However, the traditional mulch may cause microplastic pollution and soil ecological damage. Herein, a biodegradable film was developed using oxidized starch and carboxymethyl chitosan and incorporated ZIF-8 carrying fludioxonil to sustainably control soil-borne disease. The microstructure, mechanical properties, optical properties, and water barrier properties of the composite films (Flu@ZIF-8-OS/CMCS) were investigated. The results show that Flu@ZIF-8-OS/CMCS had a smooth and uniform surface and excellent light transmittance. The excellent mechanical properties of the films were verified by tensile strength, elongation at break and Young's modulus. Higher contact angle and lower water vapor permeability indicate water retention capacity of the soil was improved through using Flu@ZIF-8-OS/CMCS. Furthermore, the release properties, biological activity, degradability and safety to soil organisms of Flu@ZIF-8-OS/CMCS was determined. The addition of ZIF-8 significantly improved the film's ability to retard the release of Flu, while the Flu@ZIF-8-OS/CMCS has good soil degradability. In vitro antifungal assays and pot experiments demonstrated excellent inhibitory activity against Fusarium oxysporum f. sp. Lycopersici. Flu@ZIF-8-OS/CMCS caused only 13.33 % mortality of earthworms within 7 d. This research provides a new approach to reducing microplastic pollution and effectively managing soil-borne diseases.

Asunto(s)