RESUMEN

Amides are an important type of synthetic intermediate used in the chemical, agrochemical, pharmaceutical, and nutraceutical industries. The traditional chemical process of converting nitriles into the corresponding amides is feasible but is restricted because of the harsh conditions required. In recent decades, nitrile hydratase (NHase, EC 4.2.1.84) has attracted considerable attention because of its application in nitrile transformation as a prominent biocatalyst. In this review, we provide a comprehensive survey of recent advances in NHase research in terms of natural distribution, enzyme screening, and molecular modification on the basis of its characteristics and catalytic mechanism. Additionally, industrial applications and recent significant biotechnology advances in NHase bioengineering and immobilization techniques are systematically summarized. Moreover, the current challenges and future perspectives for its further development in industrial applications for green chemistry were also discussed. This study contributes to the current state-of-the-art, providing important technical information for new NHase applications in manufacturing industries.

RESUMEN

Background: The lipase enzyme (EC: 3.1.1.3) is one of the most important catalysts in food, dairy, detergent, and textile industries. Objective: This study was performed to identify, isolate and characterize of lipase producing bacterial strain from agrifood wastes and to identify and characterize of their lipase genes. Materials and Methods: In the present study, two lipase-producing isolates were identified from the effluent of Golbahar meat products and Soveyda vegetable oil factories using in silico and in vitro approaches. Results: The results of morphological, biochemical, and molecular characterizations showed that both lipase-producing isolates belong to the Bacillus amyloliquefaciens species. Phylogenetic analysis confirmed the results of phenotypic, biochemical, and molecular characterizations. The results showed differences between LipA and LipB in the Golbahar and Soveyda isolates. Three different amino acids (residues 14, 100, and 165) were observed in LipA and one different amino acid (residue 102) was detected in LipB extracellular lipases. The protein molecular weight of the two extracted lipases ranged from 20 to 25 kDa. The identified extracellular lipases also had different physicochemical features. The maximum lipase activity of the Golbahar and Soveyda isolates was observed at 45 °C and at the pH of 8, but the Golbahar isolates exhibited higher lipase activity compared to the Soveyda isolates. The Golbahar and Soveyda isolates exhibited different activities in the presence of some ions, inhibitors, denaturing agents, and organic solvents and the Golbahar isolates showed better lipase activity than the Soveyda isolates. Conclusions: In this study, two extracellular lipase-producing isolates of B. amyloliquefaciens were identified from different food industries, and their characteristics were investigated. The results of various investigations showed that the lipases produced by the Golbahar isolate have better characteristics than the lipases of the Soveyda isolate. The Golbahar lipases have a suitable temperature and pH activity range and maintain their activity in the presence of some ions, inhibitors, denaturing agents, and organic solvents. After further investigation, the Golbahar isolate lipase can be used in various industries. In addition, this lipase can be used enzyme engineering processes and its activity can be arbitrarily changed by targeted mutations. The results of this study can increase our knowledge of extracellular lipases and may turn out to have industrial applications.

RESUMEN

The integration of biocatalysts within metal-organic frameworks (MOFs) is attracting growing interest due to its potential to both enhance biocatalyst stability and sustain biocatalyst activity in organic solvents. However, the factors that facilitate the post-synthetic infiltration of such large molecules into MOF pores remain unclear. This systematic study enabled the identification of the influence of biocatalyst molecular size, molecular weight and affinity on the uptake by an archetypal MOF, NU-1000. We analyzed a range of six biocatalysts with molecular weights from 1.9 kDa to 44.4 kDa, respectively. By employing a combination of fluorescence tagging and 3D-STED confocal laser scanning microscopy, we distinguished between biocatalysts that were internalized within the MOF pores and those sterically excluded. The catalytic functions of the biocatalysts hosted within the MOF were investigated and found to show strong variations relative to the solvated case, ranging from a two-fold increase to a strong decrease.

RESUMEN

Specific stereoisomer is paramount as it is vital for optimizing drug efficacy and safety. The quest for the isolation of desired stereoisomer of active pharmaceutical ingredients or key intermediates drives innovation in drug synthetic and biocatalytic methods. Chiral phosphoramidate is an important building block for the synthesis of antiviral drugs such as remdesivir and sofosbuvir. Given the clinical potency of the (Sp)-diastereomer of the drugs, an enzyme capable of completely hydrolyzing the (Rp)-diastereomer is needed to achieve the purified diastereomers via biocatalytic reaction. In this study, protein engineering of phosphotriesterase (PTE) was aimed to improve the specificity. Employing rational design and site-directed mutagenesis, we generated a small library comprising 24 variants for activity screening. Notably, W131M and I106A/W131M variants demonstrated successful preparation of pure (Sp)-diastereomer of remdesivir and sofosbuvir precursors within a remarkably short hydrolysis time (<20 min). Our work unveils a promising methodology for producing pure stereoisomeric compounds, utilizing novel biocatalysts to enable the chemoenzymatic synthesis of phosphoramidate nucleoside prodrugs.

RESUMEN

Kojic acid derivatives are useful in the cosmetics and pharmaceutical industries. The current investigation focuses on the search for a safe and environmentally friendly newer whole-cell biocatalyst for the synthesis of kojic acid derivative especially 2-amino-6-(hydroxymethyl)-8-oxo-4-phenyl-4,8-dihydropyrano[3,2-b]pyran-3-carbonitrile (APhCN). In this context, a total of six cultures were isolated from fecal samples of infants and subjected to probiotic characterization followed by screening as whole cell biocatalyst (WCB). In this multicomponent reaction, benzaldehyde, malononitrile, and kojic acid were used to synthesize APhCN at room temperature under aqueous conditions. The screening of potent whole cell biocatalyst (WCB) from isolated cultures was done by comparing reaction time and percent yield. The potent WCB gave a good yield of 95% within 15 h of time and hence further characterized biochemically and identified as Lentilactobacillus farraginis by using 16S rRNA gene sequencing. Lactobacilli having GRAS (generally regarded as safe) status and being able to carry out this transformation under moderate reaction conditions with easy recovery of both product and biocatalyst, it has the potential to replace some of the chemical catalytic methods.

RESUMEN

Identification of the biochemical metabolic pathway for lignin decomposition and the responsible degradative enzymes is needed for the effective biotechnological valorization of lignin to renewable chemical products. In this study, we investigated the decomposition of kraft lignin by the soil bacterium Pseudomonas kribbensis CHA-19, a strain that can utilize kraft lignin and its main degradation metabolite, vanillic acid, as growth substrates. Gel permeation chromatography revealed that CHA-19 decomposed polymeric lignin and degraded dehydrodivanillin (a representative lignin model compound); however, the degradative enzyme(s) and mechanism were not identified. Quantitative polymerase chain reaction with mRNAs from CHA-19 cells induced in the presence of lignin showed that the putative genes coding for two laccase-like multicopper oxidases (LMCOs) and three dye-decolorizing peroxidases (DyPs) were upregulated by 2.0- to 7.9-fold compared with glucose-induced cells, which indicates possible cooperation with multiple enzymes for lignin decomposition. Computational homology analysis of the protein sequences of LMCOs and DyPs also predicted their roles in lignin decomposition. Based on the above data, CHA-19 appears to initiate oxidative lignin decomposition using multifunctional LMCOs and DyPs, producing smaller metabolites such as vanillic acid, which is further degraded via ortho- and meta-ring cleavage pathways. This study not only helps to better understand the role of bacteria in lignin decomposition and thus in terrestrial ecosystems, but also expands the biocatalytic toolbox with new bacterial cells and their degradative enzymes for lignin valorization.

RESUMEN

This study focuses on the development a green synthesis of epoxy fatty acids (EFAs) which are commonly used as the plasticizer in polymer industries. The intracellular lipases of Candida catenulata cells as a whole-cell biocatalyst (WCB) were examined in the bio-epoxidation of free fatty acids (FFAs) with hydrogen peroxide. The FFAs in soybean soap stock, an industrial by-product of vegetable oil factories, was used as the feedstock of the process. To remove phosphates from soap stock a degumming process was tested before the bio-epoxidation reaction and results revealed that the EFAs yield was improved using the degummed fatty acids (DFAs). The attachments of magnetic Fe3O4 nanoparticles to the surface of WCBs facilitated the recovery of the biocatalyst, and were improved stabilities. The activation energy for the magnetic whole-cell biocatalysts (MWCB) was 48.54 kJ mol-1, which was lower than the WCB system (51.28 kJ mol-1). The EFA yield was about 47.1 % and 33.8 % after 3 h for the MWCBs and 2 h for the WCBs, respectively. The MWCBs displayed acceptable reusability in the repetitious bio-epoxidation reaction with maintaining 59 % of the original activity after 5 cycles whereas the performance of the WCBs was 5.9 % at the same conditions. The effects of influential factors such as reaction time, molar ratio of H2O2 to CC, and batch and semi-batch operations were investigated for both biocatalyst systems. The quality of EFAs was characterized by FTIR and GC-MS analyses.

Asunto(s)

RESUMEN

A novel approach for the synthesis of 1,3,4-oxa(thia)diazole aryl thioethers through a biocatalytic strategy has been introduced. By leveraging Myceliophthora thermophila laccase (Novozym 51003) as a catalyst, catechol undergoes oxidation to ortho-quinone, facilitating subsequent 1,4-thia-Michael addition reactions. The method offers efficiency and mild reaction conditions, demonstrating promise for sustainable synthesis pathways in organic chemistry. Using this approach, 13 new derivatives of 2,5-disubstituted-1,3,4-oxa(thia)diazole aryl thioethers, with a yield of 46-94%, were synthesized.

RESUMEN

Oral administration of ß-galactosidase, which alleviate lactose intolerance symptoms, is challenging due to its instability throughout the gastrointestinal tract. The objective of this work was to make correlations between the in-vitro digestion and chemical characteristics of a ß-galactosidase/carboxymethylchitosan-silica biocatalyst powder. This was obtained by a one-pot silica gel route assisted by carboxymethyl chitosan, using maltose as lyoprotectant. The chemical characterization allowed to understand as was modulated the calcium incorporation, through electrostatic interactions and as maltose protects the enzyme from agglomeration, by vitrification and formation of hydrogen bonds. The formulated biocatalyst could be a complement of silicon and calcium, in turn, it preserves 96 % and 63 % of the enzymatic activity compared with the biocatalyst control (without simulated digestion), in the gastric and intestinal phases, respectively. This activity was even greater than that observed in the commercial products evaluated in these phases. Likewise, the biocatalyst obtained retained its activity after 12 months of storage at 25 °C and it did not present cytotoxicity in cells derived from human colon epithelial mucosa (NCM460) under the conditions and concentrations evaluated. These results make this biocatalyst in an excellent candidate for release of this enzyme. Therefore, it could be useful for lactose-intolerant people.

RESUMEN

Yeast surface display is a promising biotechnological tool that uses genetically modified yeast cell wall proteins as anchors for enzymes of interest, thereby transforming yeast cell wall into a living catalytic material. Here, we present a comprehensive protocol for quantifying surface-displayed ß-lactamase on the cell wall of model yeast Saccharomyces cerevisiae. We use ß-lactamase as a reporter enzyme, which we tagged to be anchored to the cell wall closer to its N or C terminus, through the portion of the Pir2 or Ccw12 cell wall proteins, respectively. The catalytic activity of surface-displayed ß-lactamase is assessed by its ability to hydrolyze nitrocefin, which produces a colorimetric change that is quantitatively measured by spectrophotometric analysis at 482 nm. This system enables precise quantification of the potential of S. cerevisiae strains for surface display, continuous real-time monitoring of enzyme activity, and facilitates the study of enzyme kinetics and interactions with inhibitors within the cell's native environment. In addition, the system provides a platform for high-throughput screening of potential ß-lactamase inhibitors and can be adapted for the visualization of other enzymes, making it a versatile tool for drug discovery and bioprocess development.

RESUMEN

Anthocyanidins and anthocyanins are one subclass of flavonoids in plants with diverse biological functions and have health-promoting effects. Dihydroflavonol 4-reductase (DFR) is one of the important enzymes involved in the biosynthesis of anthocyanidins and other flavonoids. Here, a new MOF-based nano-immobilized DFR enzyme acting as a nano-biocatalyst for the production of anthocyanidins in vitro was designed. We prepared UiO-66-NH2 MOF nano-carrier and recombinant DFR enzyme from genetic engineering. DFR@UiO-66-NH2 nano-immobilized enzyme was constructed based on covalent bonding under the optimum immobilization conditions of the enzyme/carrier ratio of 250 mg/g, 37 °C, pH 6.5 and fixation time of 10 min. DFR@UiO-66-NH2 was characterized and its catalytic function for the synthesis of anthocyanidins in vitro was testified using UPLC-QQQ-MS analysis. Compared with free DFR enzyme, the enzymatic reaction catalyzed by DFR@UiO-66-NH2 was more easily for manipulation in a wide range of reaction temperatures and pH values. DFR@UiO-66-NH2 had better thermal stability, enhanced adaptability, longer-term storage, outstanding tolerances to the influences of several organic reagents and Zn2+, Cu2+ and Fe2+ ions, and relatively good reusability. This work developed a new MOF-based nano-immobilized biocatalyst that had a good prospect of application in the green synthesis of anthocyanins in the future.

Asunto(s)

RESUMEN

Microbial cell surface display technology, which relies on genetically fusing heterologous target proteins to the cell wall through fusion with cell wall anchor proteins, has emerged as a promising and powerful method with diverse applications in biotechnology and biomedicine. Compared to classical intracellular or extracellular expression (secretion) systems, the cell surface display strategy stands out by eliminating the necessity for enzyme purification, overcoming substrate transport limitations, and demonstrating enhanced activity, stability, and selectivity. Unlike phage or bacterial surface display, the yeast surface display (YSD) system offers distinct advantages, including its large cell size, ease of culture and genetic manipulation, the use of generally regarded as safe (GRAS) host cell, the ability to ensure correct folding of complex eukaryotic proteins, and the potential for post-translational modifications. To date, YSD systems have found widespread applications in protein engineering, waste biorefineries, bioremediation, and the production of biocatalysts and biosensors. This review focuses on detailing various strategies and mechanisms for constructing YSD systems, providing a comprehensive overview of both fundamental principles and practical applications. Finally, the review outlines future perspectives for developing novel forms of YSD systems and explores potential applications in diverse fields.

Asunto(s)

RESUMEN

Lipases are enzymes that hydrolyze long-chain carboxylic esters, and in the presence of organic solvents, they catalyze organic synthesis reactions. However, the use of solvents in these processes often results in enzyme denaturation, leading to a reduction in enzymatic activity. Consequently, there is significant interest in identifying new lipases that are resistant to denaturing conditions, with extremozymes emerging as promising candidates for this purpose. Lip7, a lipase from Geobacillus sp. ID17, a thermophilic microorganism isolated from Deception Island, Antarctica, was recombinantly expressed in E. coli C41 (DE3) in functional soluble form. Its purification was achieved with 96% purity and 23% yield. Enzymatic characterization revealed Lip7 to be a thermo-alkaline enzyme, reaching a maximum rate of 3350 U mg-1 at 50 °C and pH 11.0, using p-nitrophenyl laurate substrate. Notably, its kinetics displayed a sigmoidal behavior, with a higher kinetic efficiency (kcat/Km) for substrates of 12-carbon atom chain. In terms of thermal stability, Lip7 demonstrates stability up to 60 °C at pH 8.0 and up to 50 °C at pH 11.0. Remarkably, it showed high stability in the presence of organic solvents, and under certain conditions even exhibited enzymatic activation, reaching up to 2.5-fold and 1.35-fold after incubation in 50% v/v ethanol and 70% v/v isopropanol, respectively. Lip7 represents one of the first lipases from the bacterial subfamily I.5 and genus Geobacillus with activity and stability at pH 11.0. Its compatibility with organic solvents makes it a compelling candidate for future research in biocatalysis and various biotechnological applications.

Asunto(s)

RESUMEN

(S)-equol, the most influential metabolite of daidzein in vivo, has aroused great attention due to the excellent biological activities. Although existing studies have accomplished the construction of its heterologous synthetic pathway in the context of anaerobicity and inefficiency of natural strains, the low productivity of (S)-equol limits its industrial application. Here, rational design strategies based on decreasing the pocket steric hindrance and fine-tuning the pocket microenvironment to systematically redesign the binding pocket of enzyme were developed and processed to the rate-limiting enzyme dihydrodaidzein reductase in (S)-equol synthesis. After iterative combinatorial mutagenesis, an effective mutant S118G/T169A capable of significantly increasing (S)-equol yield was obtained. Computational analyses illustrated that the main reason of the increased activity relied on the decreased critical distance and more stable interacting conformation. Then, the reaction optimization was performed, and the recombinant Escherichia coli whole-cell biocatalyst harboring S118G/T169A enabled the efficient conversion of 2 mM daidzein to (S)-equol, achieving conversion rate of 84.5 %, which was 2.9 times higher than that of the parental strain expressing wide type dihydrodaidzein reductase. This study provides an effective idea and a feasible method for enzyme modification and whole-cell catalytic synthesis of (S)-equol, and will greatly accelerate the process of industrial production.

Asunto(s)

RESUMEN

Perillyl alcohol (POH) is a secondary metabolite of plants. POH and its derivatives are known to be effective as an anticancer treatment. In this study, oxidative derivatives of POH, which are difficult to synthesize chemically, were synthesized using the engineered bacterial cytochrome P450 BM3 (CYP102A1) as a biocatalyst. The activity of wild-type (WT) CYP102A1 and 29 engineered enzymes toward POH was screened using a high-performance liquid chromatography. They produced one major product. Among them, the engineered CYP102A1 M601 mutant with seven mutations (R47L/F81I/F87V/E143G/L150F/L188Q/E267V) showed the highest conversion, 6.4-fold higher than the WT. Structure modeling using AlphFold2 and PyMoL suggests that mutations near the water channel may be responsible for the increased catalytic activity of the M601 mutant. The major product was identified as a POH-8,9-epoxide by gas chromatography-mass spectrometry and nuclear magnetic resonance analysis. The optimal temperature and pH for the product formation were 35 °C and pH 7.4, respectively. The kcat and Km of M601 were 540 min-1 and 2.77 mM, respectively. To improve POH-8,9-epoxide production, substrate concentration and reaction time were optimized. The optimal condition for POH-8,9-epoxide production by M601 was 5.0 mM POH, pH 7.4, 35 ℃, and 6 h reaction, which produced the highest concentration of 1.72 mM. Therefore, the biosynthesis of POH-8,9-epoxide using M601 as a biocatalyst is suggested to be an efficient and sustainable synthetic process that can be applied to chemical and pharmaceutical industries.

Asunto(s)

RESUMEN

Phosphorus (P) is essential for biological systems, playing a pivotal role in energy metabolism and forming crucial structural components of DNA and RNA. Yet its bioavailable forms are scarce. Phytate, a major form of stored phosphorus in cereals and soils, is poorly bioavailable due to its complex structure. Phytases, enzymes that hydrolyze phytate to release useable phosphorus, are vital in overcoming this limitation and have significant biotechnological applications. This study employed novel method to isolate and characterize bacterial strains capable of metabolizing phytate as the sole carbon and phosphorus source from the Andes mountains soils. Ten strains from the genera Klebsiella and Chryseobacterium were isolated, with Chryseobacterium sp. CP-77 and Klebsiella pneumoniae CP-84 showing specific activities of 3.5 ± 0.4 nkat/mg and 40.8 ± 5 nkat/mg, respectively. Genomic sequencing revealed significant genetic diversity, suggesting CP-77 may represent a novel Chryseobacterium species. A fosmid library screening identified several phytase genes, including a 3-phytase in CP-77 and a glucose 1-phosphatase and 3-phytase in CP-84. Phylogenetic analysis confirmed the novelty of these enzymes. These findings highlight the potential of phytase-producing bacteria in sustainable agriculture by enhancing phosphorus bioavailability, reducing reliance on synthetic fertilizers, and contributing to environmental management. This study expands our biotechnological toolkit for microbial phosphorus management and underscores the importance of exploring poorly characterized environments for novel microbial functions. The integration of direct cultivation with metagenomic screening offers robust approaches for discovering microbial biocatalysts, promoting sustainable agricultural practices, and advancing environmental conservation.

RESUMEN

Heterogeneous biocatalysts were prepared by adsorbing T. lanuginosus lipase (TLL) onto uncalcined (SBAUC-TLL) and calcined (SBAC-TLL) SBA-15, using ammonium fluoride as a pore expander to facilitate TLL immobilization. At an enzyme load of 1 mg/g, high immobilization yields (>90 %) and recovered activities (>80 % for SBAUC-TLL and 70 % for SBAC-TLL) were achieved. When increasing the enzyme load to 5 mg/g, the immobilization yield of SBAUC-TLL was 80 %, and the recovered activity was 50 %, while SBAC-TLL had a yield of 100 % and a recovered activity of 36 %. Crosslinking with glutaraldehyde (GA) was conducted to improve stability (SBAUC-TLL-GA and SBAC-TLL-GA). Although SBAC-TLL-GA lost 25 % of initial activity after GA modifications, it exhibited the highest thermal (t1/2 = 5.7 h at 65 °C), when compared to SBAC-TLL (t1/2 = 12 min) and the soluble enzyme (t1/2 = 36 min), and operational stability (retained 100 % activity after 5 cycles). Both biocatalysts presented high storage stability since they retained 100 % of initial activity for 30 days. These results highlight SBA-15's potential as an enzyme support and the protocol's efficacy in enhancing stability, with implications for industrial applications in the food, chemical, and pharmaceutical sectors.

Asunto(s)

RESUMEN

Bisphenol A (BPA), an endocrine disrupter with estrogen activity, can infiltrate animal and human bodies through the food chain. Enzymatic degradation of BPA holds promise as an environmentally friendly approach while it is limited due to lower stability and recycling challenges. In this study, laccase from Bacillus pumilus TCCC 11568 was expressed in Pichia pastoris (fLAC). The optimal catalytic conditions for fLAC were at pH 6.0 and 80 °C, with a half-life T1/2 of 120 min at 70 °C. fLAC achieved a 46 % degradation rate of BPA, and possible degradation pathways were proposed based on identified products and reported intermediates of BPA degradation. To improve its stability and degradation capacity, a whole-cell biocatalyst (WCB) was developed by displaying LAC (dLAC) on the surface of P. pastoris GS115. The functionally displayed LAC demonstrated enhanced thermostability and pH stability along with an improved BPA degradation ability, achieving a 91 % degradation rate. Additionally, dLAC maintained a degradation rate of over 50 % after the fourth successive cycles. This work provides a powerful catalyst for degrading BPA, which might decontaminate endocrine disruptor-contaminated water through nine possible pathways.

Asunto(s)

RESUMEN

Lactulose is a semisynthetic nondigestive sugar derived from lactose, with wide applications in the food and pharmaceutical industries. Its biological production routes which use cellobiose 2-epimerase (C2E) as the key enzyme have attracted widespread attention. In this study, a set of C2Es from different sources were overexpressed in Escherichia coli to produce lactulose. We obtained a novel and highly efficient C2E from Clostridium disporicum (CDC2E) to synthesize lactulose from lactose. The effects of different heat treatment conditions, reaction pH, reaction temperature, and substrate concentrations were investigated. Under the optimum biotransformation conditions, the final concentration of lactulose was up to 1.45 M (496.3 g/L), with a lactose conversion rate of 72.5 %. This study provides a novel C2E for the biosynthesis of lactulose from low-cost lactose.

Asunto(s)

RESUMEN

The most common heterocyclic aromatic molecule with potential uses in industry and medicine is quinoline. Its chemical formula is C9H7N, and it has a distinctive double-ring structure with a pyridine moiety fused with a benzene ring. Various synthetic approaches synthesize quinoline derivatives. These approaches include solvent-free synthetic approach, mechanochemistry, ultrasonic, photolytic synthetic approach, and microwave and catalytic synthetic approaches. One of the important synthetic approaches is a catalyst-based synthetic approach in which different catalysts are used such as silver-based catalysts, titanium-based nanoparticle catalysts, new iridium catalysts, barium-based catalysts, iron-based catalysts, gold-based catalysts, nickel-based catalyst, some metal-based photocatalyst, α-amylase biocatalyst, by using multifunctional metal-organic framework-metal nanoparticle tandem catalyst etc. In the present study, we summarized different catalyst-promoted reactions that have been reported for the synthesis of quinoline. Hopefully, the study will be helpful for the researchers.