RESUMEN

A common challenge encountered with both traditional and digitally produced dentures involves the extraction of artificial teeth from the denture base. This narrative review seeks to present an updated perspective on the adherence of synthetic teeth for denture base materials, employing diverse methods. Dental technicians often employ chemical approaches and mechanical techniques (including abrasion, laser treatment, and abrasive blasting) to augment the retention of denture teeth. However, the efficacy of these treatments remains uncertain. In certain instances, specific combinations of Denture Base Resin (DBR) materials and artificial teeth exhibit improved performance in conventional heat-cured dentures following these treatments. The primary reasons for failure are attributed to material incompatibility and inadequate copolymerization. As new denture fabrication techniques and materials continue to emerge, further research is imperative to identify optimal tooth-DBR combinations. Notably, 3D-printed tooth-DBR combinations have demonstrated reduced bond strength and less favorable failure patterns, while utilizing milled and traditional combinations appears to be a more prudent choice until advancements in additive manufacturing enhance the reliability of 3D-printing methods.

RESUMEN

Wear resistance is one of the properties that must be considered for maintaining the long-term functionality of artificial teeth in dental prostheses. This property can be altered by the method of tooth fabrication, the material, the chewing force, and the relationship to the antagonist tooth. This systematic review evaluated the wear resistance of artificial teeth obtained by the additive manufacturing method and aims to answer the question, "Do artificial teeth for dental prostheses obtained by additive manufacturing show wear resistance similar to prefabricated ones?" The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) Checklist guidelines were followed with a customized search in Scopus, PubMed/Medline, Embase, Science Direct, and Google Scholar databases on August 30, 2023. The inclusion criteria were artificial teeth for dental prostheses in acrylic resin by additive manufacturing and comparing the wear resistance with conventional prefabricated teeth, in vitro and English studies, without time restriction. And excluded if 1) do not make artificial teeth by additive manufacturing or that were metal or ceramic teeth; 2) clinical trials, animal studies, review articles, case reports, letters to the editor, short communication, book chapters; 3) another language that is not English. The selection was in two steps, reading the titles and abstracts, followed by reading the selected studies in full. The risk of bias analysis was performed with the adaptation of the quasi-experimental studies tool by Joanna Briggs Institute. Four hundred and twelve articles were found in the databases, after the selection steps and application of eligibility criteria, 6 articles were included for qualitative data analysis and presented low risk of bias. For teeth obtained by additive manufacturing, 2 studies reported lower wear resistance, 2 studies had higher resistance, and 2 similar compared to prefabricated ones. Additive manufactured teeth compared to prefabricated teeth show influences on wear resistance due to differences in material composition, relationship to the antagonist's tooth, applied force, chewing cycles, and processing methods.

RESUMEN

PURPOSE: This systematic review aimed to verify whether anatomic, semi-anatomic, or nonanatomic occlusal morphology of artificial teeth improves the masticatory function of complete or removable partial denture wearers. MATERIALS AND METHODS: According to the PICO strategy, six databases and the grey literature were searched to identify randomized (RCT) and non-randomized clinical trials (N-RCT) comparing masticatory function, in terms of masticatory performance and efficiency, and muscle activity as primary outcomes; and patient-reported results (O) in individuals using removable dentures (P) with different occlusal morphologies of artificial teeth (I/C). Masticatory ability, satisfaction with the prosthetic treatment, and oral health-related quality of life (OHRQoL) were evaluated as secondary outcomes. Risk of bias was assessed using the Cochrane risk-of-bias tool for randomized trials (RoB 2.0) for RCT and Risk of Bias for non-randomized studies with intervention (ROBINS-I) for N-RCT studies. Meta-analyses were performed to compare primary outcomes and masticatory ability between the occlusal morphologies of artificial teeth of complete or removable partial dentures (α = 0.05). Certainty of the evidence was verified using the GRADE approach. RESULTS: Eleven studies (seven RCTs and four N-RCTs) were included. The risk of bias was considered low for two studies, some concerns for five, and high for the last four studies. Meta-analyses showed that removable partial dentures with anatomic artificial teeth improved masticatory efficiency for carrot chewing (MD 6.31; 95% CI [3.39, 9.22], I2 = 0%). However, masseter and temporal muscle activities increased when removable partial dentures with nonanatomic teeth were used (MD -756.97; 95% CI [-892.25, -621.68], I2 = 100%). Masticatory ability was not influenced by occlusal morphology during chewing of all foods in complete denture users: Carrot (MD -0.88, 95% CI [-8.98, 7.23], I2 = 57%); sausage (MD -8.86, 95% CI [-23.05, 5.33], I2 = 71%); apple (MD -5.78, 95% CI [-28.82, 17.26], I2 = 87%); and cheese (MD -4.16, 95% CI [-15.14, 6.82], I2 = 62%). The certainty of evidence for all evaluated outcomes was very low, mainly due to very serious problems found in the parameters of inconsistency, indirectness, and imprecision. CONCLUSIONS: Despite the very low certainty of evidence, the occlusal morphology of artificial teeth influences masticatory function. Anatomic teeth improved the masticatory efficiency and muscle activity of removable partial denture wearers. Nonanatomic teeth increased temporal and masseter muscle activity, which negatively affected chewing in removable partial denture users. However, patients using complete dentures with anatomic and semi-anatomic teeth presented similar masticatory ability.

RESUMEN

Artificial teeth in dental training have become a valuable tool for students to gain hands-on experience in a safe and controlled environment. This training method allows students to practice various dental procedures and develop their skills without putting patients at risk. Artificial teeth can be used to simulate dental conditions, allowing students to gain experience in dealing with various situations and techniques. Although previous studies in human dentistry have demonstrated the feasibility of using 3D-printed teeth for teaching endodontic procedures such as root canal therapy, similar research has yet to be conducted in the veterinary field. This study aimed to assess the feasibility of creating 3D-printed teeth from an adult dog skull and validate their use as an alternative training tool for root canal therapy in this species. For this, cone beam computed tomography images from a medium-sized dog skull were used to replicate its teeth using a digital 3D printing system. Then, artificial mandibular first molar teeth and a 24-question survey were sent to specialized veterinary dentistry practitioners in Brazil to assess their perception of the model's characteristics during endodontic treatment. In conclusion, it was feasible to create 3D-printed models of dog teeth with high accuracy for the endodontic system. Despite the differences in the properties of the two materials between natural and artificial teeth, it was possible to use the artificial tooth as a training device for conventional endodontic treatment in dogs. The reliability level for the survey was reported as good, displaying a reliability coefficient above 0.86.

RESUMEN

This study describes prosthetic rehabilitation an edentulous patient with microstomia. Maxillary preliminary and definitive impression were made by intraoral scanning and custom 2-piece impression tray respectively to fabricate conventional denture.

RESUMEN

The data about bond strength between digitally produced denture base resins and artificial teeth are scarce. Several studies investigated shear bond strength values of milled denture base resins and different types of artificial teeth. The purpose of the present study was to compare and evaluate the available evidence through a systematic review. A bibliographic search was conducted in PubMed, Scopus, and Web of Science to assess adequate studies published up to 1 June 2022. This review followed the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines. The appropriate studies that determined the shear bond strength values between milled denture base resins and artificial teeth were selected. The initial search identified 103 studies, which were included in the PRISMA 2020 flow diagram for new systematic reviews. Three studies met the inclusion criteria, and all of them present a moderate risk of bias (score 6). Two studies found no statistical differences between heat-polymerized and CAD/CAM (milled) denture base materials when attached with different types of artificial teeth, while one study showed higher values of CAD/CAM (milled) denture base materials. Bonding agents ensure bonding strength at least similar to the conventional methods. In order to improve the quality of future studies, it would be advantageous to use a larger number of specimens with standardized dimensions and a blinded testing machine operator to decrease the risk of bias.

RESUMEN

PURPOSE: Although digital removable partial dentures have been previously described, there have been no reports on how to fabricate them in one piece. This study proposes a new method for fabricating patient-specific digital removable partial dentures using a custom plate. METHODS: First, a gypsum model was scanned using a laboratory scanner and a removable partial denture was designed using computer-aided design (CAD) software based on standard tessellation language data. The metal clasp was fabricated from Ti-6Al-4V using a 3D printer. For custom plate fabrication, a resin plate frame was designed using computer-aided design (CAD) software and fabricated using a 3D printer. An artificial tooth and metal clasp were fixed on the base surface of the frame, an auto-polymerizing resin was poured into the frame for the denture base, and the artificial tooth and metal clasp were packed to form a custom plate. The plate was cut using a milling machine. Subsequently, the support attached to the denture was removed and polished for complete fabrication of the denture. CONCLUSIONS: Our novel removable partial denture fabrication method is more efficient than the conventional method. The obtained removable partial dentures demonstrated satisfactory accuracy.

RESUMEN

PURPOSE: In this study, we propose a 3D printing-aided method for manufacturing complete dentures and evaluate its accuracy of artificial tooth positioning. METHODS: Complete dentures were designed and 3D printed and put on a plaster cast; and pack and press technique was used to fabricate the final denture during which artificial teeth were inserted in the teeth holes formed by the printed denture. In this study, fused deposition moulding (FDM) and stereolithography (SLA) techniques were used to fabricate complete dentures (10 pairs of maxillary and mandibular dentures each). After 3D scanning the final dentures, 3D comparison between the scanned teeth on the denture and its computer-aided design (CAD) data was made and single-tooth deflection angles were measured to evaluate the tooth position. Values were compared using independent-sample t-tests or the Mann-Whitney U test. RESULTS: In the result of 3D comparison, the root mean square values of artificial teeth were 0.107 ± 0.018 mm (SLA group) and 0.136 ± 0.023 mm (FDM group; P < 0.05). In the result of single-tooth deflection angles, the mandibular anterior teeth demonstrated the maximum deflection angle, followed by the molars, premolars, and maxillary anterior teeth. CONCLUSIONS: It is feasible to fabricate complete dentures using 3D-printed complete dentures as prototypes and combine conventional methods. The accuracy of the final denture fabricated using SLA printing was better than that of dentures produced using the FDM method. CLINICAL SIGNIFICANCE: The 3D printing-aided manufacturing for complete dentures refers to using the 3D-printed dentures as a prototype along with the traditional process to fabricate final dentures and is an effective alternative when the dentures cannot be directly processed using computer-aided manufacturing (CAM).

Asunto(s)

RESUMEN

INTRODUCTION: Research is lacking in the use of artificial teeth for post-core techniques in undergraduate fixed prosthodontics pre-clinical education. The aim of this study was to compare the reasons for selection and explore the direct student experiences with artificial teeth used in two pre-clinical fixed prosthodontics post-core technique teaching programs conducted in consecutive years. MATERIALS AND METHODS: Fourth year undergraduate dental students who had completed the fixed prosthodontics pre-clinical program were invited to complete an anonymous online surveys. Information was requested on the use and direct student experiences with artificial and natural teeth for post-core techniques. Quantitative data was summarised and qualitative data was clustered into topics. The reasons for selection and use of artificial and natural teeth were compared within and between the two programs. RESULTS: 36% of 70 respondents in 2020 chose to use one or more artificial teeth for the post-core exercises in the pre-clinical program compared with 94% of 77 respondents in 2021 (p < .05). The use was driven by difficulty in sourcing appropriate natural teeth. Respondents reported "ease of use" as the dominant positive user experience with the main negatives being "unrealistic simulation of natural teeth" and "different surface texture/feel when cutting." CONCLUSION: Artificial teeth were reported to provide an appropriate and realistic simulation experience compared with extracted natural teeth and were easier to source. Students focussed on the practicalities of sourcing artificial teeth, associated costs and ease of use ahead of conceivable educational benefits. Cost limited the more widespread use of artificial teeth.

Asunto(s)

RESUMEN

Objective: Teeth play a crucial role in masticatory efficiency and esthetic harmony making rehabilitation of partially edentulous patients a challenge because of the limitations of conventional removable partial dentures. As a therapeutic alternative, thermoplastic polymers are used in current dental practice either for practical processing purposes or aesthetics. However, it is recognized that the bond between acrylic resin artificial teeth and thermoplastic polymers has no chemical interaction, and depends on retentive features added to the teeth. This study analyzed the efficacy of two retentive forms of features through compressive strength test and as a secondary outcome, fracture and displacement resistance test. Material and Methods: Three groups of samples each with 14 sets of acrylic teeth were compared when two retentive features, single hole and groove retention, and a control group with teeth without any specific form. The experimental unit consisted of six maxillary anterior teeth, positioned in a linear pattern into a polypropylene block, where each tooth was submitted to a static load until its removal, on a universal testing machine. Results: Those specimens with a groove retention presented larger resistance to displacement when compared to the other groups (p <0.05). This was emphasized by the fracture of the tooth tested, with part of the cervical portion remaining embed in the base, and not its displacement as with (or without) the retentive feature. Conclusion: In this study, the type of retention influenced significantly to a better retention considering teeth and thermoplastic polymer base. The data in this study indicates that a groove placed on the artificial tooth offers significantly better retention efficacy to the point where the displacement was only possible after its fracture (AU)

Objetivo: Os dentes são um fator essencial na eficiência mastigatória. A harmonia estética e a reabilitação dos indivíduos parcialmente dentados tornam-se um desafio, frente às limitações das próteses parciais removíveis convencionais. Como uma alternativa terapêutica, os polímeros termoplásticos são utilizados na odontologia contemporânea, tanto para o seu processamento prático como seu apelo estético. Entretanto, pouco se sabe a respeito da união entre a resina acrílica de dentes artificiais e resinas termoplásticas, assim como a influência dos mecanismos de retenção, uma vez que não há interação química entre eles. O objetivo deste estudo foi analisar duas formas de retenção de dentes de resina acrílica a bases de prótese de material termoplástico, por força compressiva e como desfecho secundário, teste de resistência a fratura e deslocamento dos dentes artificiais. Material e Métodos: O presente estudo analisou dois tipos diferentes de retenções: uma cavidade com único ponto e uma canaleta de mesial a distal; e como grupo controle, dentes colocados sem qualquer recurso específico. A unidade experimental consistiu de seis dentes superiores anteriores, posicionados em linha em um bloco de polipropileno. Em cada dente artificial foi aplicada força até a sua remoção, em uma máquina universal de ensaios. Resultados: Os resultados mostraram que a retenção com canaleta apresentou maior força de deslocamento, quando comparado com os outros grupos (p <0,05). Tal fato foi evidenciado pelo teste de fratura e deslocamento, no qual parte da porção cervical do dente artificial permaneceu unida à base, não ocorrendo o deslocamento com (ou sem) a retenção. Conclusão: Neste estudo, o tipo de retenção influenciou de forma significante a retenção de dentes artificiais de resina acrílica a bases de prótese termoplásticas. Os dados deste estudo indicam que a confecção da retenção em canaleta nos dentes artificiais oferece significante aumento na eficiência da retenção, ao ponto em que o deslocamento do dente ocorreu somente após sua fratura (AU).

Asunto(s)

RESUMEN

AIM: To investigate the dental arch dimension (width, length, and height) and facial measurements including inner-canthal width (ICW), bizygomatic width (BZW), inter-alar width (IAW), and mouth width (MW), and to assess the correlation between these facial measurements and dental arch width (canine width [CW], inter-first premolar width [I1PW], and inter-first molar width [I1MW]), to establish a preliminary reference for artificial teeth selection in Yemeni adult. MATERIALS AND METHODS: The study included 80 individuals (40 males and 40 females) with symmetrical faces and normal class I occlusion ranging in age from 20 to 35. Maxillary and mandibular stone casts were made for each individual. The dimensions of dental casts and facial measurements, including ICW, BZW, IAW, and MW, were assessed using a digital caliper. The collected data were analyzed by using the SPSS software program. The descriptive statistics for each measurement were made. Differences between males and females were tested using an independent-sample t-test with p-values below 0.05 considered significant. Pearson correlation coefficient between facial measurements and dental arch width was also done. RESULTS: Most dental arch dimensions and facial measurements exhibited larger mean values in the male than in the female group, with the greatest significant difference in the maxillary dental arch width and the lowest in mandibular dental arch length. A highly significant correlation is observed between ICW and maxillary canine width (CW) (r = 0.318, p = 0.004). In contrast, no significant correlation between dental arch width and BZW, IAW, and MW is shown. CONCLUSIONS: Within this study's limitations, the ICW can determine the ideal dimension of the artificial teeth in the anterior maxillary arch. While the other facial parameters, including BZW, IAW, and MW, cannot be used for artificial teeth selection in Yemeni populations. CLINICAL SIGNIFICANCE: The findings of this study established a reference database of facial measurements and their correlation to dental arch and teeth width in Yemeni populations. So, it can be implemented in artificial teeth and dental prostheses design and construction.

Asunto(s)

RESUMEN

OBJECTIVES: To investigate whether artificial CAD/CAM processed (computer-aided design/manufacturing) teeth could be a feasible option for the production of dental in vitro models for biomechanical testing. MATERIAL AND METHODS: Disks (n = 10 per group) made from two different CAD/CAM-materials, one fiber-reinforced composite (FRC; Trinia, Bicon) and one polymethylmethacrylate-based resin (PMMA; Telio CAD, Ivoclar Vivadent), as well as bovine teeth (n = 10), were tested for their shear bond strength (SBS) and scored according to the adhesive remnant index (ARI). In addition, CAD/CAM-manufactured lower incisor teeth were tested for their ultimate load (Fu). RESULTS: With regard to SBS, both PMMA (17.4 ± 2.2 MPa) and FRC (18.0 ± 2.4 MPa) disks showed no significant difference (p = 0.968) compared to bovine disks (18.0 ± 5.4 MPa). However, the samples differed with regard to their failure mode (PMMA: ARI 4, delamination failure; FRC: ARI 0 and bovine: ARI 1.6, both adhesive failure). With regard to Fu, FRC-based teeth could withstand significantly higher loads (708 ± 126 N) than PMMA-based teeth (345 ± 109 N) (p < 0.01). CONCLUSION: Unlike PMMA-based teeth, teeth made from FRC showed sufficiently high fracture resistance and comparable SBS. Thus, FRC teeth could be a promising alternative for the production of dental in vitro models for orthodontic testing. CLINICAL RELEVANCE: CAD/CAM-processed teeth made from FRC enable the use of standardized geometry and constant material properties. Using FRC teeth in dental in vitro studies has therefore the potential to identify differences between various treatment options with rather small sample sizes, while remaining close to the clinical situation.

Asunto(s)

RESUMEN

BACKGROUND: E-learning has found its way into dental teaching in general and endodontic teaching in particular. The present study aimed to implement a newly developed multimedia learning application and assess its effect on students' first root canal treatment on real patients. With the COVID-19 outbreak, the application's performance was investigated during the pandemic. METHODS: A total of 138 students in the initial clinical endodontic course participated in this study. The control group (n = 49) followed the traditional curriculum, including practice on artificial teeth and face-to-face teaching events. In addition to the traditional curriculum, test group 1 (n = 54) had access to an endodontic e-learning application containing videos demonstrating artificial teeth and patient cases. With the COVID-19 outbreak, test group 2 (n = 35) had no face-to-face teaching; however, endodontic patient treatments were included. The quality of students' first root canal treatment on real patients was compared using performance and radiographic assessment items. Statistical analysis was done using Kruskal-Wallis and chi-squared tests. Test groups received a questionnaire to assess the learning application. Test group 2 also completed a COVID-19-specific survey to measure students' perceptions of how the pandemic affected their endodontic education. RESULTS: The results of endodontic treatments were significantly better for test group 1 (P < 0.001) and 2 (P < 0.001) than for the control group. Likewise, there were significantly fewer treatment errors in test group 1 (P < 0.001) and 2 (P < 0.001). No significant differences were found between test groups 1 and 2. Students of the test groups positively evaluated the e-learning application. Students of test group 2 expressed their fear of negative impacts on their course performance. CONCLUSION: The e-learning application was well-received and seemed to improve endodontic education. The results imply that the quality of education may be maintained by implementing e-learning to compensate for face-to-face teaching. As no difference was found between online and face-to-face teaching, students' and lecturers' concerns that endodontic education is suffering because of the pandemic may be eased.

Asunto(s)

RESUMEN

Context: Artificial teeth are widely used in oral rehabilitation. Despite the benefits, they are more susceptible to colour changes, causing aesthetic problems. Aims: To evaluate the effect of conventional cigarette and straw smoke on the colour of artificial teeth and the effectiveness of hygiene protocols in removing pigmentation. Material and Methods: Acrylic resin incisors were divided into two groups (n = 50): Exposed to conventional cigarette and straw smoke. Regarding the effectiveness of hygiene protocols, the teeth were divided into ten subgroups with predetermined immersion times. The colour was measured with a colorimeter. The CIE values L* a* b* were recorded before and after exposure to smoke and after hygiene protocols. Statistical analysis used T-test of independent samples and two-way ANOVA with Bonferroni post-test (α = 0.05). Results: Conventional (16.16 ± 1.65) and straw (16.29 ± 1.95) cigarettes provided clinically unacceptable ΔE values, with no significant difference between them (P = 0.719). Conventional cigarettes promoted less luminosity (ΔL = -12.68 ± 1.28) (P < 0.001) and straw greater tendency to yellow (Δb = 11.00 ± 1.46) (P < 0.001). The hygiene protocols influenced the ΔE, ΔL, and Δb of the samples, depending on the type of smoke (P < 0.05). Conclusions: The conventional and rolled cigarette smoke promote an unacceptable colour change in artificial teeth. Hygiene protocols with the use of brushing, in isolation or in association with chemical solutions are more effective in removing pigmentation caused by both types of cigarettes compared to only the chemical solution.

Asunto(s)

RESUMEN

PURPOSE: This study comprehensively reviewed the current status of the digital workflow of removable partial dentures (RPDs) and summarized information about the fabrication methods and material properties of the dental framework, artificial teeth, and denture base. STUDY SELECTION: We performed a systematic review of the literature published in online databases from January 1980 to April 2020 regarding RPD fabrication and materials used in the related digital technology. We selected eligible articles, retrieved information regarding digital RPDs, and conducted qualitative/quantitative analyses. In this paper, the computer-aided design/computer-aided manufacturing (CAD/CAM) framework, artificial teeth, and denture base materials are reported. RESULTS: A variety of materials, such as cobalt-chromium alloy, titanium, zirconia, and polyether ether ketone, are used for dental CAD/CAM frameworks. The mechanical strength of the metal materials used for the CAD/CAM framework was superior to that of the cast framework. However, the fitness and surface roughness of the framework and clasp fabricated using a selective laser melting (SLM) method were not superior to those obtained via cast fabrication. Most material properties and the surface roughness of poly methyl methacrylate (PMMA) discs used for digital RPDs were superior to those of heat-cured PMMA. CONCLUSION: The use of a CAD/CAM framework and PMMA disc for digital RPDs offers numerous advantages over conventional RPDs. However, technical challenges regarding the accuracy and durability of adhesion between the framework and denture base remain to be solved. In digital fabrication, human technical factors influence the quality of the framework.

Asunto(s)

RESUMEN

OBJECTIVES: In this prospective randomized controlled trial, we measured the primary and secondary stability of two surface-treated implants placed in the posterior maxilla, applied 3-month loading protocols, and compared and analyzed the short-term outcomes of the implants. PATIENTS AND METHODS: : From June 2018 to June 2019, patients with a residual bone height of 4 mm in the posterior maxilla were enrolled and randomly divided into two groups to place SA implants (Osstem Implants, Korea) in Group A and NH implants (Hiossen, USA) in Group B. Finally, 14 implants placed in 13 patients in Group A and 17 implants placed in 14 patients in Group B were analyzed. The measured primary and secondary stability of each implant was represented by implant stability quotient (ISQ), and treatment outcomes were evaluated. RESULTS: : Group A consisted of patients with an average age of 62.2 years (range, 48-80 years), and Group B consisted of patients with an average age of 58.1 years (range, 35-82 years). Primary stability was 73.86±6.40 and 71.24±5.32 in Groups A and B, respectively (P=0.222). Secondary stability was 79.07±5.21 in Group A and 78.29±4.74 in Group B (P=0.667). A steep increase in ISQ during the healing period was observed in Group B, though it was not significant (P=0.265). The mean follow-up period was 378.5±164.6 days in Group A and 385.3±167.9 days in Group B. All implants in each group met the success criteria, and the success rate was 100%. CONCLUSION: Two surface-treated implants placed in the posterior maxilla with greater than 4 mm alveolar bone height exhibited successful one-year treatment outcomes if a primary stability of 65 or higher ISQ was obtained and a 3-month early loading protocol was applied.

RESUMEN

BACKGROUND: This study aimed to evaluate the use of artificial teeth for endodontic training for dental students. MATERIALS AND METHODS: The following aspects of the artificial teeth were approved by the endodontists in Isfahan University of Medical Science: internal and external anatomy; coronal pulp chambers regarding their size, shape, and canal path; the root canals regarding their size, shape, and position; filling the pulp chamber and root canals by considering the texture, quantity, color, and ease of handling; and resin hardness and visualization of the radiographic image. RESULTS: The results showed favorable opinions regarding the internal and external anatomy, coronal pulp chamber, root canal (s), handling, and radiographic imaging. The contents of the pulp space and hardness of the teeth were satisfactory. CONCLUSION: The artificial teeth tested have the potential to replace the natural teeth in preclinical training.

RESUMEN

OBJECTIVES: The present study aims to compare the obturation quality of 2 confluence confirmation techniques in artificial maxillary first premolars showing Vertucci type II root canal configuration. MATERIALS AND METHODS: Thirty artificial maxillary premolars having Vertucci type II root canal configuration were made. They were divided into 3 groups according to the confluence confirmation technique as follows. Gutta-percha indentation (GPI) group (confluence confirmation using a gutta-percha cone and a K file); electronic apex locator (EAL) group (confluence confirmation using K files and EAL); and no confluence detection (NCD) group. In the GPI group and the EAL group, shaping and obturation were performed with the modified working length (WL). In the NCD group, shaping was performed without WL adjustment and obturation was carried out with an adjusted master cone. Micro-computed tomography was used before preparation and after obturation to calculate the percentage of gutta-percha occupied volume (%GPv) and the volume increase in the apical 4 mm. Data were analyzed using 1-way analysis of variance and post hoc Tukey's test. RESULTS: Statistically significant difference was not found in terms of the %GPv from the apex to apical 4 mm. However, the NCD group showed a statistically significant volume increase compared with the EAL group (p < 0.05). CONCLUSIONS: In terms of gutta-percha occupied volume, no significant difference was observed among the 3 groups. Confluence confirmation using an EAL in teeth with Vertucci type II configuration showed less volume increase during canal shaping compared with no confluence confirmation.

RESUMEN

This research was conducted to investigate the bond strength between artificial teeth and a thermoplastic denture base resin for injection molding with different surface preparations for use in flexible resin removable partial dentures. Composite resin denture teeth and acrylic denture resin teeth were bonded to three types of thermoplastic denture base resins for injection molding (polyamide, polyester, and polycarbonate) and a conventional heat-polymerized polymethyl methacrylate (PMMA) resin (control). The ridge lap surfaces of the artificial teeth were classified into four groups based on the type of ridge lap surface treatment applied (n=10): no treatment, ethyl acetate, small T-shaped tunnel, and large T-shaped tunnel. The specimens were tested for bond strength. The results showed that the ethyl acetate treatment was ineffective for enhancing the bond strength (p>0.05) between the artificial teeth and thermoplastic denture base resin for injection molding, whereas the T-shaped tunnel was quite effective in this regard (p<0.05).

Asunto(s)

RESUMEN

OBJECTIVES: The aim of this study was, firstly, to analyse the long-time fatigue behaviour of crowns constructed from a novel polyetherketoneketone (PEKK) polymer, using artificial prepared teeth. Secondly, to determine the effect of the material's stiffness that used as an artificial prepared tooth on the fatigue life of the PEKK crowns in comparison to human prepared teeth. METHODS: Veneered crowns with a PEKK framework were constructed on three different prepared teeth: artificial polymethyl methacrylate (PMMA) teeth, artificial CoCr teeth and extracted human teeth. As far as applicable, the loading protocol was based on EN ISO 14801:2007 for fatigue testing of dental implants. After initial static fracture tests on three specimens from each group, the remaining crowns were loaded with different force levels until fracture or until 2 × 106 loading cycles were reached. The number of loading cycles until failure was recorded. Wöhler curves were created to display the fatigue limits. RESULTS: Static fracture limits as well as fatigue limits differed for all three core materials. The static fracture tests resulted in fracture limits of 1200 (± 293) N for the PMMA group, 1330 (± 219) N for the CoCr group and 899 (± 96) N for the human tooth group. Fatigue limits of 770 N, 840 N and 720 N were determined for the PMMA group, CoCr group and human tooth group, respectively. CONCLUSIONS: The determined fatigue limit of above 720 N (depending on the core material) is sufficiently high and a good performance of this crown material is expected in the clinical loading life. The results showed that using artificial teeth instead of natural teeth for fatigue testing of crowns might result in an overestimation of the fatigue limits of the crown material. CLINICAL RELEVANCE: PEKK-made crowns offer a stable and priceworthy treatment for patients, in particular those that suffer from metal allergy.

Asunto(s)