RESUMEN
Membrane separation techniques are promising methods for effectively treating hazardous emulsified oily wastewater, but membrane fouling remains a serious challenge because the high viscosity and complex composition of crude oil make it easy to adhere to membranes and difficult to be removed by conventional physical or chemical cleaning means. Herein, a two-stage solar-driven (photo-Fenton degradation/evaporation) strategy was proposed to realize the self-cleaning of membranes fouled by viscous crude oil (>60,000 mPa s), wherein the photo-Fenton process helped to degrade the heavy components into light components, and all light components removed during the solar-driven evaporation process. A 1D/2D heterostructure membrane with photo-Fenton activity and anti-crude-oil-fouling performance was prepared via a facile self-assembly vacuum-assist method. The addition of rod-like g-C3N4 (RCN) increased the interlayer distance of α-FeOOH/porous g-C3N4 (FPCN) nanosheets, resulting in a high permeation flux. The FPCN-RCN membrane exhibited both high permeation flux of 779 ± 19 L m-2h-1bar-1 and a separation efficiency of 99.4% for highly viscous crude oil-in-water emulsion. Importantly, the viscous crude oil fouled on the membrane was completely removed by the photo-Fenton degradation/solar-driven evaporation strategy, and the flux recovery rate of the membrane was â¼100%. Therefore, the FPCN-RCN membrane combined with the novel self-cleaning strategy exhibits great potential for practical emulsified oily wastewater treatment.
RESUMEN
Fluorine-free liquid-repellent coatings have been highly demanded for a variety of applications. However, rapid formation of coatings possessing outstanding oil repellency and strong bonding ability as well as good mechanical strength (e.g., bendability, impact resistance, and scratch resistance) remains a grand challenge. Herein, a robust strategy to rapidly create fluorine-free oil-repellent coatings in only 30 s via rational design of a semi-interpenetrating polymer network structure is reported. The resulting coating manifests strong bonding capability both in air and underwater. More importantly, it not only provides unprecedented oil repellency, even to high-viscosity crude oil, but also achieves both excellent bendability and hardness. This simple yet effective design strategy opens up a new avenue to manufacture multifunctional materials and devices with desirable features and structural complexities for applications in sustainable antifouling, drag reduction, nondestructive transportation, liquid collection, and biomedicine, among other areas.
RESUMEN
The crude oil spill accidents cause numerous crude oil contaminations and oily wastewater. Underwater superoleophobic coating has excellent ability to resist crude oil contamination and separate oily wastewater. But it's hard to keep stable performance against the physical or chemical attack. Herein, a robust underwater superoleophobic coating was fabricated by spraying the mixture of polyethyleneimine (PEI) and TiO2 on epoxy resin (E44) surface. Besides the good physical and chemical stability, the coating exhibited better drag reduction, anti-fouling performance and anti-corrosive performance in water compared with the commercially hydrophilic coating. The stainless steel mesh (SSM), coated by the E44/PEI/TiO2 coating, could separate different oil-water emulsions with a high oil rejection greater than 99.7%.
Asunto(s)
Petróleo , Purificación del Agua , Lubrificación , Aceites , Polietileneimina , Aguas Residuales , AguaRESUMEN
HYPOTHESIS: Transparent superhydrophilic coatings are very promising in various scenarios. Appropriate fabrication of colloid coatings with superhydrophilicity both in air and under oil would enlarge their application potential in anti-oil fouling and facilitate anti-fogging of transparent surfaces. EXPERIMENTS: The Barite colloid was obtained from a one-step precipitation method and was transferred onto glasses to prepare transparent coatings with different thicknesses simply by dip-coating. Then, the impact of thickness on wettability and property was studied through the investigation of wettability in various phase, anti-crude oil fouling performance and anti-fogging ability. FINDINGS: Similar surface morphology and roughness of these coatings were achieved and all the coated surfaces showed ultra-hydrophilicity both in air and under oil. Moreover, the hydrophilicity in air and under oil was found to deteriorate with the decrease of coatings' thickness and dual superhydrophilicity could be achieved on thick coatings. More importantly, excellent anti-crude oil fouling property and durable anti-fogging ability were realized on these transparent coatings with dual superhydrophilicity.
RESUMEN
The oil and bacteria adhesion during membrane separation process brings great challenges to the operation costs and membrane service life. Meantime, the strong chemical corrosion in sewage seriously limits the durability of membrane as well. Herein, a facile strategy is developed for fabricating highly stable and efficient zwitterionic nanofibrous membrane (NFM) with self-cleaning feature via the combination of in-situ cross-linking of poly (sulfobetaine methacrylate) (PSBMA) and electrospun poly (ether sulfone) (PES) nanofibers. Owing to the introduction of zwitterionic functional groups, the PSBMA/PES NFM exhibits superior antifouling ability (over 3 cycles of crude oil fouling/self-cleaning and up to 7 days of bacteria adhesion/repelling tests). Moreover, the membrane also presents remarkable chemical stability in acidic, alkaline and salty environments; and exhibits excellent separation performance for both layered oil/water mixture and oil-in-water emulsion as well. Furthermore, the membrane is capable to remove bacteria during the continuous oil/water mixture separation. Overall, the proposed strategy provides a new perspective into developing long-term antifouling membrane materials for complicated oily wastewater remediation in various corrosive environments.
RESUMEN
Crude oil fouling on membrane surfaces is a persistent, crippling challenge in oil spill remediation and oilfield wastewater treatment. In this research, we present how a nanosized oxide coating can profoundly affect the anti-crude-oil property of membrane materials. Select oxide coatings with a thickness of â¼10 nm are deposited conformally on common polymer membrane surfaces by atomic layer deposition to significantly mitigate fouling during filtration processes. TiO2- and SnO2-coated membranes exhibited far greater anti-crude-oil performance than ZnO- and Al2O3-coated ones. Tightly bound hydration layers play a crucial role in protecting the surface from crude oil adhesion, as revealed by molecular dynamics simulations. This work provides a facile strategy to fabricate crude-oil-resistant membranes with negligible impact on membrane structure, and also demonstrates that, contrary to common belief, excellent crude oil resistance can be achieved easily without implementation of sophisticated, hierarchical structures.