RESUMEN

Metal-Organic Frameworks (MOFs), praised for structural flexibility and tunability, are prominent catalyst prototypes for exploring oxygen evolution reaction (OER). Yet, their intricate transformations under OER, especially in industrial high-current environments, pose significant challenges in accurately elucidating their structure-activity correlation. Here, we harnessed an electrooxidation process for controllable MOF reconstruction, discovering that Fe doping expedites Ni(Fe)-MOF structural evolution, accompanied by the elongation of Ni-O bonds, monitored by in-situ Raman and UV-visible spectroscopy. Theoretical modeling further reveals that Fe doping and defect-induced tensile strain in the NiO6 octahedra augments the metal ds-Op hybridization, optimizing their adsorption behavior and augmenting OER activity. The reconstructed Ni(Fe)-MOF, serving as the anode in anion exchange membrane water electrolysis, achieves a noteworthy current density of 3.3 A cm-2 at 2.2 V while maintaining equally stable operation for 160 h spanning from 0.5 A cm-2 to 1 A cm-2. This undertaking elevates our comprehension of OER catalyst reconstruction, furnishing promising avenues for designing highly efficacious catalysts across electrochemical platforms.

RESUMEN

Nickel-iron (oxy)hydroxide (NiFeOxHy) stands as a cutting-edge nonprecious electrocatalyst for the oxygen evolution reaction (OER). However, the intrinsic thermodynamic instability of nickel and iron as anode materials in pure water-fed electrolyzers poses a significant durability challenge. In this study, an anion exchange ionomer coating was applied to NiFeOxHy to modify the local pH between a membrane and an electrode. This effectively extended the diffusion length of hydroxide anions toward the electrode, establishing an alkaline local pH environment. Stability tests with the ionomer coating showed reduced Ni dissolution. Moreover, locally resolved current density measurements were used to demonstrate a notably lower degradation rate during stability testing, revealing a 6-fold increase in stability with the ionomer on NiFeOxHy. In situ Raman spectroscopy in a neutral pH electrolyte confirmed inhibited Ni oxidation with the ionomer, mitigating Ni dissolution and enhancing stability of state-of-the-art NiFeOxHy catalysts in pure water-fed water electrolyzers.

RESUMEN

Anion exchange membrane water electrolysis (AEMWE) for hydrogen production combines the advantages of proton exchange membrane water electrolysis and alkaline water electrolysis. Several strategies have been adopted to improve the performance of AEMWE and to obtain membranes with high hydroxide ion conductivity, low gas permeation, and high durability. In this work AEMs reinforced with poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (PBIO) polymer fibres have been developed. A fibre web of PBIO prepared by electrospinning was impregnated into the poly(terphenylene) mTPN ionomer. The membranes are strengthened by the formation of a strong surface interaction between the reinforcement and the ionomer and by the expansion of the reinforcement over the membrane thickness. The hydroxide ion conductivity, thermal stability, dimensional swelling, mechanical properties, and hydrogen crossover of the reinforced membranes were compared with the characteristics of the non-reinforced counterpart. The incorporation of PBIO nanofibre reinforcement into the membrane reduced hydrogen crossover and improved tensile properties, without affecting hydroxide conductivity. PBIO-reinforced mTPN membrane was assessed in a PGM-free 5 cm2 AEMWE single cell using NiFe oxide anode and NiMo cathode catalysts, at a cell temperature of 50 °C and with 1 M KOH fed to the anode. The performance of the cell increased continuously over the 260 hours test period, reaching 2.06 V at 1.0 A cm-2.

RESUMEN

Developing a high-efficiency and stable anode catalyst layer (CL) is crucial for promoting the practical applications of anion exchange membrane (AEM) water electrolyzers. Herein, a hierarchical nanosheet array composed of oxygen vacancy-enriched CoCrOx nanosheets and dispersed FeNi layered double hydroxide (LDH) is proposed to regulate the electronic structure and increase the electrical conductivity for improving the intrinsic activity of the oxygen evolution reaction (OER). The CoCrOx/NiFe LDH electrodes require an overpotential of 205 mV to achieve a current density of 100 mA cm-2, and they exhibit long-term stability at 1000 mA cm-2 over 7000 h. Notably, a breakthrough strategy is introduced in membrane electrode assembly (MEA) fabrication by transferring CoCrOx/NiFe LDH to the surface of an AEM, forming a 3D-interlocked anode CL, significantly reducing the overall cell resistance and enhancing the liquid/gas mass transfer. In AEM water electrolysis, it exhibits an ultralow cell voltage of 1.55 Vcell to achieve a current density of 1.0 A cm-2 in 1 M KOH, outperforming the state-of-the-art Pt/C//IrO2. This work provides a valuable approach to designing high-efficiency electrocatalysts at the single-cell level for advanced alkaline water electrolysis technologies.

RESUMEN

The anion exchange membrane water electrolysis is widely regarded as the next-generation technology for producing green hydrogen. The OH- conductivity of the anion exchange membrane plays a key role in the practical implementation of this device. Here, we present a series of Z-S-x membranes with dibenzothiophene groups. These membranes contain sulfur-enhanced hydrogen bond networks that link surrounding surface site hopping regions, forming continuous OH- conducting highways. Z-S-20 has a high through-plane OH- conductivity of 182±28 mS cm-1 and ultralong stability of 2650 h in KOH solution at 80 °C. Based on rational design, we achieved a high PGM-free alkaline water electrolysis performance of 7.12 A cm-2 at 2.0 V in a flow cell and demonstrated durability of 650 h at 2 A cm-2 at 40 °C with a cell voltage increase of 0.65 mV/h.

RESUMEN

Developing robust oxygen evolution reaction (OER) electrocatalysts is crucial for advancing anion exchange membrane water electrolysis (AEMWE). In this study, we present a catalyst optimizing the synergistic effect of Co and Fe by creating a CoFe-based layer on a Fe-based electrode (Fe@CoFe). The Fe@CoFe exhibits an overpotential of 168 mV at 10 mA cm-2 under half-cell conditions and a current density of 10 A cm-2 at 2 V in the AEMWE system with 1 M KOH. Moreover, it showcases a degradation rate of 76 µV h-1 for 2000 h at 500 mA cm-2 in the single-cell system. This study demonstrates the feasibility of achieving efficient and durable water electrolysis using a transition metal-based catalyst exclusively fabricated via electrodeposition.

RESUMEN

Anion exchange membrane water electrolyzers (AEMWEs) have an intrinsic advantage over acidic proton exchange membrane water electrolyzers through their ability to use inexpensive, stable materials such as stainless steel (SS) to catalyze the sluggish oxygen evolution reaction (OER). As such, the study of active oxide layers on SS has garnered great interest. Potential cycling is a means to create such active oxide layers in situ as they are readily formed in alkaline solutions when exposed to elevated potentials. Cycling conditions in the literature are rife with unexplained variations, and a complete account of how these variations affect the activity and constitution of SS oxide layers remains unreported, along with their influence on AEMWE performance. In this paper, we seek to fill this gap in the literature by strategically cycling SS felt (SSF) electrodes under different scan rates and ranges. The SSF anodes were rapidly activated within the first 50 cycles, as shown by the 10-fold decline in charge transfer resistance, and the subsequent 1000 cycles tuned the metal oxide surface composition. Cycling the Ni redox couple (RC) increases Ni content, which is further enhanced by lowering the cycling rate, while cycling the Fe RC increases Cr content. Fair OER activity was uncovered through cycling the Ni RC, while Fe cycling produced SSF electrodes active toward both the OER and the hydrogen evolution reaction (HER). This indicates that inert SSF electrodes can be activated to become efficient OER and HER electrodes. To this effect, a single-cell AEMWE without any traditional catalyst or ionomer generated 1.0 A cm-2 at 1.94 V ± 13.3 mV with an SSF anode, showing a fair performance for a cell free of critical raw materials.

RESUMEN

Designing high-performance and durable oxygen evolution reaction (OER) catalysts is important for green hydrogen production through anion exchange membrane water electrolysis (AEMWE). Herein, a series of Mn-doped Co-based OER catalysts supported on FeOxHy (FCMx) are presented to enhance the OER activity. Mn doping effectively reduces the size of the Co oxide particles, thereby augmenting the active surface area. Moreover, Mn doping induces the creation of oxygen vacancies, leading to an efficient structural conversion during the OER, which is confirmed via in situ Raman spectroscopy. Under optimal conditions, the catalyst exhibits an overpotential of 234.4 mV at 10 mA cm-2 and a Tafel slope of 37.2 mV dec-1 under half-cell conditions. The AEMWE single-cell system demonstrates a current density of 1560 mA cm-2 at 1.8 V at 60 °C with a degradation rate of 0.4 mV h-1 for 500 h at 500 mA cm-2. Our development of a robust OER catalyst represents notable progress in the field of nonprecious-metal water electrolysis, marking a step toward cost-effective green hydrogen production.

RESUMEN

Water electrolyzers powered by renewable energy are emerging as clean and sustainable technology for producing hydrogen without carbon emissions. Specifically, anion exchange membrane (AEM) electrolyzers utilizing non-platinum group metal (non-PGM) catalysts have garnered attention as a cost-effective method for hydrogen production, especially when integrated with solar cells. Nonetheless, the progress of such integrated systems is hindered by inadequate water electrolysis efficiency, primarily caused by poor oxygen evolution reaction (OER) electrodes. To address this issue, a NiFeCo─OOH has developed as an OER electrocatalyst and successfully demonstrated its efficacy in an AEM electrolyzer, which is powered by renewable electricity and integrated with a silicon solar cell.

RESUMEN

In this work, two structurally different monoamines (trimethylamine [TMA] and N-methylpiperidine [N-MPip]) are used for the amination of a g-VBC-15 graft copolymer, obtained by the functionalization of a mechanically robust, commercially available styrene-butadiene block copolymer (SB) with vinylbenzyl chloride (VBC) via solution free-radical polymerization. Results demonstrate that g-VBC-15-based membranes quaternized with TMA have superior electrochemical performance than N-MPip counterparts; while, the mechanical properties are good and only slightly inferior to those of N-MPip. Therefore, TMA is the selected monoamine to be alternatively mixed with two polyamines (tetramethyl-1,3-propanediamine [TMPDA] and N,N,N',N'',N''-pentamethyldiethylenetriamine [PMDETA]) into different proportions, in order to modulate the average functionality of the amination mixture in terms of number of amine functional groups available for the quaternization reaction of the membranes. g-VBC-15-based membranes derived therefrom are extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. Results indicate that membranes quaternized with a TMA/PMDETA mixture (90:10 in mole) display the highest conductivity among all the investigated membranes aminated with polyamine-based mixtures. Moreover, they have comparable mechanical and electrochemical properties to those quaternized with TMA, while exhibiting a reduced water uptake.

Asunto(s)

Aminas , Electrólisis , Agua , Agua/química , Aminas/química , Estructura Molecular , Membranas Artificiales , Polimerizacion , Polímeros/química

RESUMEN

Anion exchange membrane water electrolysis (AEMWE) is an attractive method for green hydrogen production. It allows the use of non-platinum group metal catalysts and can achieve performance comparable to proton exchange membrane water electrolyzers due to recent technological advances. While current systems already show high performances with available materials, research gaps remain in understanding electrode durability and degradation behavior. In this study, the performance and degradation tracking of a Ni3Fe-LDH-based single-cell is implemented and investigated through the correlation of electrochemical data using chemical and physical characterization methods. A performance stability of 1000 h, with a degradation rate of 84 µV h-1 at 1 A cm-2 is achieved, presenting the Ni3Fe-LDH-based cell as a stable and cost-attractive AEMWE system. The results show that the conductivity of the formed Ni-Fe-phase is one key to obtaining high electrolyzer performance and that, despite Fe leaching, change in anion-conducting binder compound, and morphological changes inside the catalyst bulk, the Ni3Fe-LDH-based single-cells demonstrate high performance and durability. The work reveals the importance of longer stability tests and presents a holistic approach of electrochemical tracking and post-mortem analysis that offers a guideline for investigating electrode degradation behavior over extended measurement periods.

RESUMEN

Development of robust electrocatalysts for the oxygen evolution reaction (OER) underpins the efficient production of green hydrogen via anion exchange membrane water electrolysis (AEMWE). This study elucidates the factors contributing to the degradation of cobalt-based (Co-based) OER catalysts synthesized via electrodeposition, thus establishing strategic approaches to enhance their longevity. Systematic variations in the electroplating process and subsequent heat treatment reveal a delicate balance between catalytic activity and durability, substantiated by comprehensive electrochemical assessments and material analyses. Building upon these findings, the Co-based anode is successfully optimized in the AEMWE single-cell configuration, showcasing an average degradation rate of 0.07 mV h-1 over a continuous operation for 1500 h at a current density of 1 A cm-2.

RESUMEN

The formation of multiple oxygen intermediates supporting efficient oxygen evolution reaction (OER) are affinitive with hydroxyl adsorption. However, ability of the catalyst to capture hydroxyl and maintain the continuous supply at active sits remains a tremendous challenge. Herein, an affordable Ni2P/FeP2 heterostructure is presented to form the internal polarization field (IPF), arising hydroxyl spillover (HOSo) during OER. Facilitated by IPF, the oriented HOSo from FeP2 to Ni2P can activate the Ni site with a new hydroxyl transmission channel and build the optimized reaction path of oxygen intermediates for lower adsorption energy, boosting the OER activity (242 mV vs. RHE at 100 mA cm-2) for least 100 h. More interestingly, for the anion exchange membrane water electrolyzer (AEMWE) with low concentration electrolyte, the advantage of HOSo effect is significantly amplified, delivering 1 A cm-2 at a low cell voltage of 1.88 V with excellent stability for over 50 h.

RESUMEN

Developing non-precious catalysts with long-term catalytic durability and structural stability under industrial conditions is the key to practical alkaline anion exchange membrane (AEM) water electrolysis. Here, an energy-saving approach is proposed to synthesize defect-rich iron nickel oxyhydroxide for stability and efficiency toward the oxygen evolution reaction. Benefiting from in situ cation exchange, the nanosheet-nanoflake-structured catalyst is homogeneously embedded in, and tightly bonded to, its substrate, making it ultrastable at high current densities. Experimental and theoretical calculation results reveal that the introduction of Ni in FeOOH reduces the activation energy barrier for the catalytic reaction and that the purposely created oxygen defects not only ensure the exposure of active sites and maximize the effective catalyst surface but also modulate the local coordination environment and chemisorption properties of both Fe and Ni sites, thus lowering the energy barrier from *O to *OOH. Consequently, the optimized d-(Fe,Ni)OOH catalyst exhibits outstanding catalytic activity with long-term durability under both laboratory and industrial conditions. The large-area d-(Fe,Ni)OOH||NiMoN pair requires 1.795 V to reach a current density of 500 mA cm-2 at an absolute current of 12.5 A in an AEM electrolyzer for overall water electrolysis, showing great potential for industrial water electrolysis.

RESUMEN

Perovskite oxides stand out as emerging oxygen evolution reaction (OER) catalysts on account of their effective electrocatalytic performance and low costs. Nevertheless, perovskite oxides suffer from severe bubble overpotential and inhibited electrochemical performance in large current densities due to their small specific surface areas and structural compactness. Herein, the study highlights the electrospun nickel-substituted La0.5 Sr0.5 FeO3-δ (LSF) porous perovskite nanofibers, that is, La0.5 Sr0.5 Fe1-x Nix O3-δ (denoted as ES-LSFN-x, x = 0, 0.1, 0.3, and 0.5), as high-performance OER electrocatalysts. The most effective La0.5 Sr0.5 Fe0.5 Ni0.5 O3-δ (ES-LSFN-0.5) nanofibers suggest a larger specific surface area, higher porosity, and faster mass transfer than the counterpart sample prepared by conventional sol-gel method (SG-LSFN-0.5), showing notably increased geometric and intrinsic activities. The bubble visualization results demonstrate that the enriched and nano-sized porosity of ES-LSFN-0.5 enables reinforced aerophobicity and rapid detachment of oxygen bubbles, thereby reducing the bubble overpotential and enhancing the electrochemical performance. As a result, the ES-LSFN-0.5-based anion exchange membrane water electrolysis delivers a superior stability of 100 h while the SG-LSFN-0.5 counterpart degrades rapidly within 20 h under a current density of 100 mA cm-2 . The results highlight the advantage of porous electrocatalysts in optimizing the performance of large current density water electrolysis devices by reducing the bubble overpotential.

RESUMEN

In this work, a commercial SBS was functionalized with the 2,2,6,6-tetramethylpiperidin-N-oxyl stable radical (TEMPO) via free-radical activation initiated with benzoyl peroxide (BPO). The obtained macroinitiator was used to graft both vinylbenzyl chloride (VBC) and styrene/VBC random copolymer chains from SBS to create g-VBC-x and g-VBC-x-co-Sty-z graft copolymers, respectively. The controlled nature of the polymerization as well as the use of a solvent allowed us to reduce the extent of the formation of the unwanted, non-grafted (co)polymer, thereby facilitating the graft copolymer's purification. The obtained graft copolymers were used to prepare films via solution casting using chloroform. The -CH2Cl functional groups of the VBC grafts were then quantitatively converted to -CH2(CH3)3N+ quaternary ammonium groups via reaction with trimethylamine directly on the films, and the films, therefore, were investigated as anion exchange membranes (AEMs) for potential application in a water electrolyzer (WE). The membranes were extensively characterized to assess their thermal, mechanical, and ex situ electrochemical properties. They generally presented ionic conductivity comparable to or higher than that of a commercial benchmark as well as higher water uptake and hydrogen permeability. Interestingly, the styrene/VBC-grafted copolymer was found to be more mechanically resistant than the corresponding graft copolymer not containing the styrene component. For this reason, the copolymer g-VBC-5-co-Sty-16-Q with the best balance of mechanical, water uptake, and electrochemical properties was selected for a single-cell test in an AEM-WE.

RESUMEN

Anion exchange membranes (AEM) are core components for alkaline electrochemical energy technologies, such as water electrolysis and fuel cells. They are regarded as promising alternatives for proton exchange membranes (PEM) due to the possibility of using platinum group metal (PGM)-free electrocatalysts. However, their chemical stability and conductivity are still of great concern, which is appearing to be a major challenge for developing AEM-based energy systems. Herein, we highlight an AEM with styrene-b-ethylene-b-butylene-b-styrene copolymer (SEBS) as a backbone and pyrrolidinium or piperidinium functional groups tethered on flexible ethylene oxide spacer side-chains (SEBS-Py2O6). This membrane reached 27.8 mS cm-1 hydroxide ion conductivity at room temperature, which is higher compared to previously obtained piperidinium-functionalized SEBS reaching up to 10.09 mS cm-1. The SEBS-Py206 combined with PGM-free electrodes in an AWE water electrolysis (AEMWE) cell achieves 520 mA cm-2 at 2 V in 0.1 M KOH and 171 mA cm-2 in ultra-pure water (UPW). This high performance indicates that SEBS-Py2O6 membranes are suitable for application in water electrolysis.

RESUMEN

Among existing water electrolysis (WE) technologies, anion-exchange-membrane water electrolyzers (AEMWEs) show promise for low-cost operation enabled by the basic solid-polymer electrolyte used to conduct hydroxide ions. The basic environment within the electrolyzer, in principle, allows the use of non-platinum-group metal catalysts and less-expensive cell components compared to acidic-membrane systems. Nevertheless, AEMWEs are still underdeveloped, and the degradation and failure modes are not well understood. To improve performance and durability, supporting electrolytes such as KOH and K2CO3 are often added to the water feed. The effect of the anion interactions with the ionomer membrane (particularly other than OH-), however, remains poorly understood. We studied three commercial anion-exchange ionomers (Aemion, Sustainion, and PiperION) during oxygen evolution (OER) at oxidizing potentials in several supporting electrolytes and characterized their chemical stability with surface-sensitive techniques. We analyzed factors including the ionomer conductivity, redox potential, and pH tolerance to determine what governs ionomer stability during OER. Specifically, we discovered that the oxidation of Aemion at the electrode surface is favored in the presence of CO32-/HCO3- anions perhaps due to the poor conductivity of that ionomer in the carbonate/bicarbonate form. Sustainion tends to lose its charge-carrying groups as a result of electrochemical degradation favored in basic electrolytes. PiperION seems to be similarly negatively affected by a pH drop and low carbonate/bicarbonate conductivity under the applied oxidizing potential. The insight into the interactions of the supporting electrolyte anions with the ionomer/membrane helps shed light on some of the degradation pathways possible inside of the AEMWE and enables the informed design of materials for water electrolysis.

RESUMEN

We prepare three-dimensional honeycomb-like Cu0.81Co2.19O4 nanosheet arrays supported by Ni foam via electrochemical codeposition of cobalt and copper hydroxides on Ni foam followed by thermal oxidation. The codeposition with Cu changes the morphology of the cobalt hydroxide deposit to form honeycomb-like nanostructures, significantly decreasing the onset potential for oxygen evolution. The Cu0.81Co2.19O4 anode displays an exceptionally low overpotential of 290 mV at a current density of 10 mA cm-2 in 1 M KOH, and an anion-exchange membrane water electrolysis cell employing the above anode achieves a current density of 100 mA cm-2 at 1.68 V in 0.1 M KOH.