RESUMEN

AgSbS2-xSex is a promising light-harvesting material for thin film solar cells, characterized by nontoxicity, high chemical stability, and excellent optoelectronic properties. However, the complex chemical composition of AgSbS2-xSex poses significant challenges to thin film preparation, giving rise to an intensive dependence on multi-step preparation methods. Herein, a hydrothermal method is developed for depositing AgSbS2-xSex films and achieves one-step preparation of this kind of thin film materials for the first time. This method can provide sufficient energy for atomic nucleation and adsorption on the substrate surface to promote nuclei aggregation and grow into films. Meanwhile, it achieves control of the chemical kinetics of the deposition solution by introducing EDTA-2Na as an additive and suppressing the enrichment of Ag2Se impurities at the substrate interface. As a result, a high-purity AgSbS2-xSex film with compact and flat morphology is prepared and assembled into solar cells. The device delivers a power conversion efficiency of 3.04% under standard illumination, which is currently the highest efficiency for AgSbS2-xSex solar cells fabricated by the one-step method. This study provides a facile and promising method for the controllable preparation of high-quality AgSbS2-xSex thin films and promoting their application in solar cells.

RESUMEN

Antimony-based chalcogenides have emerged as promising candidates for next-generation thin film photovoltaics. Particularly, binary Sb2 S3 thin films have exhibited great potential for optoelectronic applications, due to the facile and low-cost fabrication, simple composition, decent charge transport and superior stability. However, most of the reported efficient Sb2 S3 solar cells are realized based on chemical bath deposition and hydrothermal methods, which require large amount of solution and are normally very time-consuming. In this work, Ag ions are introduced within the Sb2 S3 sol-gel precursors, and effectively modulated the crystallization and charge transport properties of Sb2 S3 . The crystallinity of the Sb2 S3 crystal grains are enhanced and the charge carrier mobility is increased, which resulted improved charge collection efficiency and reduced charge recombination losses, reflected by the greatly improved fill factor and open-circuit voltage of the Ag incorporated Sb2 S3 solar cells. The champion devices reached a record high power conversion efficiency of 7.73% (with antireflection coating), which is comparable with the best photovoltaic performance of Sb2 S3 solar cells achieved based on chemical bath deposition and hydrothermal techniques, and pave the great avenue for next-generation solution-processed photovoltaics.

RESUMEN

A novel dual-mode microfluidic sensing platform based on CuO nanozymes as a photoelectrochemical (PEC)-fluorescent (FL) multifunctional signal label was developed for ultrasensitive neuron specific enolase (NSE) detection. Herein, ZnO/Au/AgSbS2 hybrids, possessing excellent PEC properties, were first exploited as a sensing matrix to provide a stable photocurrent. The controlled synthesis of photoactive ZnO nanoflowers (NFs) was successfully conducted using a microfluidic reactor in the scale of seconds. Furthermore, the photocurrent of ZnO NFs decorated by Au and AgSbS2 nanoparticles significantly improved, owing to the local surface plasma resonance effect of Au and matching band structure between ZnO and AgSbS2. A strategy of catalytic oxidation ascorbic acid (AA) by CuO nanozymes was proposed to quench the PEC signals and initiate FL signals. CuO nanoparticles growing on conductive carbon spheres (CuO@CSs) as secondary antibodies' labels could efficiently catalyze the oxidation of AA to achieve a PEC "signal-off" state. Then, the produced dehydroascorbic acid reacting with o-phenylenediamine opportunely generated a strong FL signal. Importantly, wide linear ranges of 0.0001-150 ng/mL for the PEC technique and 0.001-150 ng/mL for the FL method with a low detection limit of 0.028 and 0.25 pg/mL, respectively, could guarantee the sensitive detection of NSE.

Asunto(s)

Técnicas Biosensibles , Óxido de Zinc , Cobre , Técnicas Electroquímicas , Microfluídica , Óxido de Zinc/química

RESUMEN

Cubic phase AgSbS2nanocrystals (NCs) were synthesized by the hot-injection method, and they were inserted between the Al andp-Si to fabricate Al/AgSbS2/p-Si photodiode by the thermal evaporation method. AgSbS2NCs were characterized by XRD, SEM and TEM instruments to confirm the crystal phase, surface morphology as well as crystalline size. The XRD pattern revealed that the cubic crystalline structure of the AgSbS2. The spherical shapes and well surface morphology were affirmed by SEM and TEM analysis. Al/AgSbS2/p-Si photodiode was characterized byI-Vmeasurements depending on the light power intensity and byC-Vmeasurement for various frequencies.I-Vcharacteristics revealed that the Al/AgSbS2/p-Si exhibited good photodiode behavior and a high rectifying ratio. Various diode and detector parameters were extracted fromI-Vmeasurements, and they were discussed in detail. TheC-Vcharacteristics highlighted that the Al/AgSbS2/p-Si photodiode showed voltage and frequency dependent profile at the accumulation region. The fabricated Al/AgSbS2/p-Si photodiode can be thought for optoelectronic applications.

RESUMEN

Silver dimetal chalcogenide (Ag-V-VI2 ) ternary quantum dots (QDs) are emerging lead-free materials for optoelectronic devices due to their NIR band gaps, large absorption coefficients, and superior electronic properties. However, thin film-based devices of the ternary QDs still lag behind due to the lack of understanding of the surface chemistry, compared to that of lead chalcogenide QDs even with the same crystal structure. Herein the surface ligand interactions of AgSbS2 QDs, synthesized with 1-dodecanethiol used as a stabilizer, are studied. For nonpolar (1 0 0) surfaces, it is suggested that the thiolate ligands are associated with the crystal lattices, thus preventing surface oxidation by protecting sulfur after air-exposure, as confirmed through optical and surface chemical analysis. Otherwise, silver rich (1 1 1) surfaces are passivated by thiolate ligands, allowing ligand exchange processes for the conductive films. This in-depth investigation of the surface chemistry of ternary QDs will prompt the performance enhancement of their optoelectronic devices.