RESUMEN

Maleic hydrazide (MH) is a commonly used plant growth regulator and herbicide. However, due to its potential mutagenicity, carcinogenicity, genotoxicity, and cytotoxicity, sensitive and rapid detection of MH residues in foods is crucial. Herein, a sensitive and reliable surface-enhanced Raman scattering (SERS) sensor for MH based on a self-constructed hydrogel SERS platform is proposed for the first time. The used hydrogel SERS chips contain aggregated Ag nanoparticles (a-AgNPs). Under the irradiation of 785 nm laser, the a-AgNPs provide a large quantity of plasmonic hots to produce strong electromagnetic enhancement. Thus, strong SERS signal of MH can be gained on the hydrogel SERS platform. In addition, the unique network structure of hydrogel greatly improves the anti-interference ability to the complex sample matrix. As a result, the developed SERS sensor for MH shows the advantages of high sensitivity (a low detection limit of 50 ppb), fast response (10 min), and high selectivity. The reliability of the sensor is supported by the satisfactory recoveries of 92.80 - 105.6 % in actual samples (tea and potato). The constructed SERS sensor provides a promising approach for rapid on-site testing of MH residues.

RESUMEN

Bimetallic (Au/Ag) nanoparticles (BNPs) have shown enhanced antibacterial activity compared to their monometallic counterparts. Sulfated galactans (SG) are a naturally occurring polymer commonly found in red seaweed Gracilaria fisheri. They are biocompatible and biodegradable and environmentally friendly. In this study, we utilized SG in combination with BNPs to develop composite materials that potentially enhance antibacterial activity against shrimp pathogens Vibrio parahaemolyticus and Vibrio harveyi, compared to BNPs or SG alone. BNPs were coated with sulfated galactan (SGBNPs) and characterized using UV-vis spectroscopy, Fourier transform infrared (FTIR) spectroscopy, zeta potential, and transmission electron microscopy (TEM). UV-vis spectroscopy analysis revealed that the surface plasmon peaks of BNPs and SGBNPs appeared at 530 nm and 532 nm, respectively. Zeta potential measurements showed that SGBNPs had a negative charge of -32.4 mV, while the BNPs solution had a positive charge of 38.7 mV. TEM images demonstrated the spherical morphology of both BNPs and SGBNPs with narrow size distributions (3-10 nm). Analysis of the FTIR spectra indicated that SG maintained its backbone structure in SGBNPs, but some functional groups were altered. Notably, SGBNPs showed superior antimicrobial and antibiofilm activities against V. parahaemolyticus and V. harveyi compared to SG and BNPs. Furthermore, treatment with SGBNPs significantly down-regulated the expression of virulence-related genes (toxR, cpsQ, and mfpA) for V. parahaemolyticus 3HP compared to the respective control, bacteria treated with BNPs or SG. Diets supplemented with SGBNPs, BNPs, or SG showed no detrimental impact on the growth of shrimp Penaeus vannamei. Shrimp fed with SGBNPs-supplemented feed showed significantly higher survival rates than those fed with BNPs-supplemented feed when infected with 3HP after being on the supplemented feed for seven days and a subsequent number of fifteen days. These findings collectively demonstrate the benefit of using SG capped Au-Ag BNPs as an antibacterial agent for the prevention and control of Vibrio sp. Infection in shrimp while reducing the risk of environmental contamination.

Asunto(s)

RESUMEN

Silver nanowire (AgNW) transparent electrodes are considered as a promising candidate for applications in flexible optoelectronic devices. However, it remains a great challenge to obtain flexible AgNW electrodes with excellent optoelectrical properties and mechanical flexibility. Here, highly stable Ag nanoparticle (AgNP)-enhanced plasmonic AgNW electrodes are demonstrated via the controllable in situ growth of AgNPs at the AgNW junctions and introduction of an l-histidine (l-His) wrapping layer. The flexible transparent electrodes of AgNW-AgNP/l-His possess a low sheet resistance (Rsh) of ∼17.5 Ω sq-1, a high transmittance of ∼92.5% (550 nm), and a robust mechanical stability (100,000 bending cycles). Benefiting from plasmon-coupling effects, flexible polymer light-emitting devices (FPLEDs) with AgNW-AgNP/l-His electrodes present a current efficiency (CE) of ∼14.8 cd A-1 and an external quantum efficiency (EQE) of ∼5.6%, constituting ∼80% and ∼75% increases compared to those of the reference devices with AgNW electrodes, respectively. Additionally, the laminated flexible transparent PLEDs (FT-PLEDs) are demonstrated by integrating polydimethylsiloxane/AgNW-AgNP anodes by a soft lamination process. The FT-PLEDs present a CE of ∼7.1 cd A-1 (cathode side: ∼3.9 cd A-1; anode side: ∼3.2 cd A-1) and an EQE of ∼2.7% (cathode side: ∼1.5%; anode side: ∼1.2%). Furthermore, the FPLEDs and FT-PLEDs exhibit robust mechanical durability, maintaining ∼89% and ∼86% of their initial luminance after 1000 bending cycles at a bending radius of 2 mm, respectively. This work opens up a new avenue for the development of high performance and stable flexible optoelectronic devices.

RESUMEN

Flexible surface-enhanced Raman scattering (SERS) substrates are very promising to meet the needs for real-time and on-field detection in practical applications. However, high-performance flexible SERS substrates often suffer from complexity and high cost in fabrication, limiting their widespread applications. Herein, we developed a facile method to fabricate a flexible multicavity SERS substrate composed of a silver nanoparticle (AgNP)-decorated aluminum hydrous oxide nanoflake array (NFA) grown on a polydimethylsiloxane (PDMS) membrane. Strong plasmon couplings promoted by multiple nanocavities afford high-density hotspots within such a flexible AgNPs@NFA/PDMS film, boosting high SERS sensitivity with an enhancement factor (EF) of ∼1.54 × 109, and a limit of detection (LOD) of ∼7.4 × 10-13 M for rhodamine 6G (R6G) molecules. Furthermore, benefiting from the high sensitivity, high mechanical stability, and transparency of this substrate, in situ SERS detections of trace thiram and crystal violet (CV) molecules on the surface of cherry tomatoes and fish have been realized, with LODs much lower than the maximum allowable limit in food, demonstrating the great potential of such a flexible substrate in food safety monitoring. More importantly, the preparation processes are very simple and environmentally friendly, and the techniques involved are completely compatible with well-established silicon device technologies. Therefore, large-area fabrication with low cost can be readily realized, enabling the extensive applications of SERS sensors in daily life.

RESUMEN

Understanding the degradation of nanoparticles (NPs) after crossing the cell plasma membrane is crucial in drug delivery designs and cytotoxicity assessment. However, the key factors controlling the degradable kinetics remain unclear due to the absence of a quantification model. In this study, subcellular imaging of silver nanoparticles (AgNPs) was used to determine the intracellular transfer of AgNPs, and single particle ICP-MS was utilized to track the degradation process. A cellular kinetic model was subsequently developed to describe the uptake, transfer, and degradation behaviors of AgNPs. Our model demonstrated that the intracellular degradation efficiency of AgNPs was much higher than that determined by mimicking testing, and the degradation of NPs was highly influenced by cellular factors. Specifically, deficiencies in Ca or Zn primarily decreased the kinetic dissolution of NPs, while a Ca deficiency also resulted in the retardation of NP transfer. The biological significance of these kinetic parameters was strongly revealed. Our model indicated that the majority of internalized AgNPs dissolved, with the resulting ions being rapidly depurated. The release of Ag ions was largely dependent on the microvesicle-mediated route. By changing the coating and size of AgNPs, the model results suggested that size influenced the transfer of NPs into the degradation process, whereas coating affected the degradation kinetics. Overall, our developed model provides a valuable tool for understanding and predicting the impacts of the physicochemical properties of NPs and the ambient environment on nanotoxicity and therapeutic efficacy.

Asunto(s)

RESUMEN

In the present study, green synthesis of silver nanoparticles (VNE-AgNPs) via Verbascum nudatum extract was carried out for the first time. The synthesized AgNPs were characterized by different spectral methods such as UV-vis, FTIR, XRD, TEM, and EDAX. According to TEM analyses, the average size range of AgNPs was 17-21 nm, and the dominant peaks in the 111°, 200°, 221°, and 311° planes in the XRD pattern indicated the Ag-NPs FCC crystal structure. FTIR data showed that VNE-AgNPs interacted with many reducing, capping, and stabilizing phytochemicals during green synthesis. VNE-AgNPs had higher antibacterial activity against S. aureus and E. coli bacterial strains with a maximum inhibition zone of 21 and 18 mm, respectively, than penicillin 5 IU, used as a positive control in the study. The cytotoxic effect of VNE-AgNPs appeared at a concentration of 50 µg/mL in L929 cells and 5 µg/mL in cancer (A549) cells. When the impact of VNE-AgNPs and C-AgNPs on inflammation was compared, it was found that VNE-AgNPs increased TNF-α levels (333.45 ± 67.20 ng/mg-protein) statistically (p < 0.05) more than TNF-α levels (256.92 ± 27.88 ng/mg-protein) in cells treated with C-AgNPs. VNE-Ag-NPs were found to have a degradation efficiency of 65% against methylene blue (MB) dye within 3 h.

Asunto(s)

RESUMEN

Developing an accurate, cost-effective, reliable, and stable glucose detection sensor for the food industry poses a significant yet challenging endeavor. Herein, we present a silver nanoparticle-decorated titanium dioxide nanoribbon array on titanium plate (Ag@TiO2/TP) as an efficient electrode for non-enzymatic glucose detection in alkaline environments. Electrochemical evaluations of the Ag@TiO2/TP electrode reveal a broad linear response range (0.001 mM - 4 mM), high sensitivity (19,106 and 4264 µA mM-1 cm-2), rapid response time (6 s), and a notably low detection limit (0.18 µM, S/N = 3). Moreover, its efficacy in measuring glucose in beverage samples shows its practical applicability. The impressive performance and structural benefits of the Ag@TiO2/TP electrode highlight its potential in advancing electrochemical sensors for small molecule detection.

Asunto(s)

RESUMEN

The emergence of fluorinated organic compounds in the pharmaceutical, agrochemical, and textile industries has led to a potential increase in the environmental issues and health problems. Herein, a modified heterojunction of bio-synthesized Ag nanoparticles (Ag0 NPs) immobilized on imidazole-modified graphite carbon nitride (Im/g-C3N4) as a suitable support (Ag0/Im/g-C3N4) was hydrothermally synthesized and studied for the photocatalytic removal of the most widely used antifungal organo-fluorine compound-fluconazole (FCZ). The optical properties were thoroughly investigated in the present study, and it was observed that the proposed modification to g-C3N4 has led to the shifting of conduction and valance band edge position (for g-C3N4, -0.73 and 1.54 eV and for ICA, -1.14 and 1.28 eV), narrowing of band gap energies, i.e., 2.01 eV, and reduced charge recombination rate. The external and internal surface morphologies were scrutinized through FE-SEM and HR-TEM analyses. Functionalities and potential crystallinity were investigated using FTIR and XRD techniques. The elemental state and composition of the composite were analyzed via XPS. The obtained results substantiate the intended modifications in the ICA composite. The photocatalyst Ag0/Im/g-C3N4 (ICA) was able to degrade 95.74% of FCZ with a high degradation rate (k1) of 0.0289 min-1 within 2-h of the solar illumination experiment. The overall degradation process was observed to be governed by a pseudo-first-order kinetic model. Detailed parameters such as effects of ions, pH (optimized pH 4, highest degradation rate k1 =0.039 min-1), dissolved organic matter (DOM), and optimization of catalysts dosage were studied. The major reactive oxygen species (ROS) was identified as super-oxide radicals (O2●-). The HR-MS and COD-TOC analysis were used to evaluate the degradation and mineralization of FCZ forced by ICA catalysts. The ICA catalyst was found to be stable and reusable for up to five cycles suggesting towards its potential towards the mitigation of environmental pollutants.

Asunto(s)

RESUMEN

Nanoparticle-enhanced laser-induced breakdown spectroscopy and Tag-LIBS are two approaches that have been shown to significantly enhance LIBS sensitivity and specificity. In an effort to combine both of these approaches, we have initiated a study on the effect of the presence of Silver nanoparticle concentrations on Europium (Eu) and Ytterbium (Yb) LIBS signals. These elements are part of metal-loaded polymers conjugated to antibodies. We observe a signal enhancement of the emission lines of about 10 and 12 times for the Europium and Ytterbium lines. This study shows that Europium and Ytterbium are enhanced differently; Europium shows enhancement for both neutral and ionized species while the Ytterbium shows enhancement only for ionized species. Additionally, we found that NPs at 0.1 mg/mL and 0.05 mg/mL achieved maximum enhancement for Eu and Yb, respectively. Based on our findings, the temperature and electron density of Eu and Yb are not significantly different for NPs concentrations, but the total signal intensity is significantly higher for optimum NP concentrations for both Eu and Yb.

Asunto(s)

RESUMEN

In recent years, Ag nanoparticle (Ag NP)-loaded antibacterial dressings have attracted much attention in high-level medical dressings. However, the high cytotoxicity of Ag NP has always been a problem. In this paper, we examined the improvement of antibacterial activity of berberine hydrochloride (BBR) with Ag NP, the results showed that the combined use of BBR and Ag NP can effectively reduce the dosage of Ag NP while ensuring the inhibition of bacterial growth, thus an intermediate layer dressing containing combined drugs were prepared. At the same time, the top dressing of polyvinyl alcohol (PVA) solid film and the PVA bottom dressings with three kinds of leakage structures were prepared by 3D printing technology. Three kinds of PVA bottom dressings showed high quality consistency, and the greater the number of leak holes, the higher the porosity value of the dressing, while the swelling ratio value of the bottom layer dressing with three holes was the lowest. Finally, three types of BBR-Ag NP composite antibacterial dressings (3D-BBR-Ag NP) can be obtained by self-assembling of the top dressing, the intermediate layer dressing, and the bottom dressings with three kinds of leakage structures. The cumulative drug release results showed that dressing with more holes had a faster drug release rate compared to the other two ones with fewer leakage holes. Besides, five drug release kinetic models were used to investigate the cumulative BBR release profiles for three types of 3D-BBR-Ag NP. And the three types of composite dressings showed strong antibacterial activity after 6 h of cultivation with staphylococcus aureus. The study showed that the antibacterial activity of the self-assembled dressing prepared by combination of BBR with Ag NP can be improved, and the drug release rate of the hydrogel dressing can be flexibly controlled through 3D printing technology.

Asunto(s)

RESUMEN

Green synthesis is a promising method for the preparation of nanoparticles (NPs) due to its simplicity, low cost, low toxicity, and environmental friendliness. Biosynthesized NPs exhibit multifunctional activity, good biocompatibility, and higher anticancer and antibacterial activity compared to chemically synthesized NPs. R-phycoerythrin, a photosynthetic light-harvesting pigment of protein nature (M.w. 290 kDa), is an attractive platform for the synthesis of small sizes NPs due to its structural features, non-toxicity, water solubility. Photosensitive bioconjugates of R-phycoerythrin with NPs were prepared by synthesizing Ag° and CdS NPs in tunnel cavities of R-phycoerythrin (3.5 × 6.0 nm) isolated from the red seaweed Callithamnion rubosum. The review is devoted to the physical processes and chemical reactions that occur in the native protein macromolecule of a complex structure during the synthesis of a NP in its cavity. The influence of Ago and CdS NPs on the electronic processes caused by the absorption of photons, leading to reversible and irreversible changes in R-phycoerythrin has been analyzed. Properties of R-phycoerythrin bioconjugates Ag° and CdS with NPs combined with the literature data suggest potential applications of Ag°â‹…PE and CdS⋅PE bioconjugates for cancer diagnosis, treatment, and monitoring as well as for realizing theranostic strategy in the future. The use of these bioconjugates in anticancer therapy may have synergistic effects since both R-phycoerythrin and NPs induce cancer cell death.

Asunto(s)

RESUMEN

The extinction efficiency of noble metal nanoparticles (NPs), namely gold (Au) and silver (Ag), are dependent on their size and surrounding dielectric. Exploiting the Localized Surface Plasmon Resonance (LSPR) phenomenon, the composition and structure of the NPs might be tailored to achieve a configuration that optimizes their response (sensitivity) to environmental changes. This can be done by preparing a bimetallic system, benefiting from the chemical stability of Au NPs and the higher scattering efficiency of Ag NPs. To enhance the LSPR sensing robustness, incorporating solid supports in the form of nanocomposite thin films is a suitable alternative. In this context, the NPs composed of gold (Au), silver (Ag), and their mixture in bimetallic Au-Ag NPs, were grown in a titanium dioxide (TiO2) matrix using reactive DC magnetron sputtering. Thermal treatment at different temperatures (up to 700 °C) tuned the LSPR response of the films and, consequently, their sensitivity. Notably, the bimetallic film with Au/Ag atomic ratio 1 exhibited the highest refractive index sensitivity (RIS), with a value of 181 nm/RIU, almost one order of magnitude higher than monometallic Au-TiO2. The nanostructural analysis revealed a wide NP size distribution of bimetallic NPs with an average size of 31 nm, covering about 20% of the overall surface area. These findings underscore the significant potential of bimetallic film systems, namely AuAg-TiO2, in LSPR sensing enhancement.

RESUMEN

Due to the strong oxidizing properties of H2O2, excessive discharge of H2O2 will cause great harm to the environment. Moreover, H2O2 is also an energetic material used as fuel, with specific attention given to its safety. Therefore, it is of great importance to explore and prepare good sensitive materials for the detection of H2O2 with a low detection limit and high selectivity. In this work, a kind of hydrogen peroxide electrochemical sensor has been fabricated. That is, polypyrrole (PPy) has been electropolymerized on the glass carbon electrode (GCE), and then Ag and Cu nanoparticles are modified together on the surface of polypyrrole by electrodeposition. SEM analysis shows that Cu and Ag nanoparticles are uniformly deposited on the surface of PPy. Electrochemical characterization results display that the sensor has a good response to H2O2 with two linear intervals. The first linear range is 0.1-1 mM (R2 = 0.9978, S = 265.06 µA/ (mM × cm2)), and the detection limit is 0.027 µM (S/N = 3). The second linear range is 1-35 mM (R2 = 0.9969, 445.78 µA/ (mM × cm2)), corresponding to 0.063 µM of detection limit (S/N = 3). The sensor reveals good reproducibility (σ = 2.104), repeatability (σ = 2.027), anti-interference, and stability. The recoveries of the electrode are 99.84-103.00% (for 0.1-1 mM of linear range) and 98.65-104.80% (for 1-35 mM linear range). Furthermore, the costs of the hydrogen peroxide electrochemical sensor proposed in this work are reduced largely by using non-precious metals without degradation of the sensing performance of H2O2. This study provides a facile way to develop nanocomposite electrochemical sensors.

RESUMEN

This study was designed to extend the shelf life of fruits and vegetables through a novel technique based on utilization of microbially driven enzyme glucose oxidase and casting a fine layer of hydrogen peroxide on the food item that protected the fruit from decay. The produced nanoparticles (ZnO, Ag) were ligated with Glucose Oxidize (GOx) purified from Aspergillus niger. Post ligation studies revealed that ligated enzymes display relatively enhanced activity. Four types of sprays were prepared in order to compare their effectiveness. Glucose oxidase/silver nanoparticles (GOx/AgNPs), glucose oxidase/zinc oxide nanoparticles (GOx/ZnONPs), AgNPs and ZnONPs sprays were applied to guava fruit samples as post-harvest therapeutic agents for a period of 15 days. Fruit quality parameters such as total suspended solids (TSS), pH, weight loss, DPPH free radical capturing performance and firmness confirms that usage of the bioconjugates especially that of GOx/ZnONP was curiously active to maintain the physical appearance of fruit well along with no such deterioration in chemical composition of fruit. Consequently, enzymes ligated on the surface of nanoparticles (ZnONP) are exceptional for extension of post-harvest shelf life of fruits such as guava.

Asunto(s)

RESUMEN

Polymethyl methacrylate (PMMA) frequently features in dental restorative materials due to its favorable properties. However, its surface exhibits a propensity for bacterial colonization, and the material can fracture under masticatory pressure. This study incorporated commercially available RHA-1F-II nano-silver loaded zirconium phosphate (Ag-ZrP) into room-temperature cured PMMA at varying mass fractions. Various methods were employed to characterize Ag-ZrP. Subsequently, an examination of the effects of Ag-ZrP on the antimicrobial properties, biosafety, and mechanical properties of PMMA materials was conducted. The results indicated that the antibacterial rate against Streptococcus mutans was enhanced at Ag-ZrP additions of 0%wt, 0.5%wt, 1.0%wt, 1.5%wt, 2.0%wt, 2.5%wt, and 3.0%wt, achieving respective rates of 53.53%, 67.08%, 83.23%, 93.38%, 95.85%, and 98.00%. Similarly, the antibacterial rate against Escherichia coli registered at 31.62%, 50.14%, 64.00%, 75.09%, 86.30%, 92.98%. When Ag-ZrP was introduced at amounts ranging from 1.0% to 1.5%, PMMA materials exhibited peak mechanical properties. However, mechanical strength diminished beyond additions of 2.5%wt to 3.0%wt, relative to the 0%wt group, while PMMA demonstrated no notable cytotoxicity below a 3.0%wt dosage. Thus, it is inferred that optimal antimicrobial and mechanical properties of PMMA materials are achieved with nano-Ag-ZrP (RHA-1F-II) additions of 1.5%wt to 2.0%wt, without eliciting cytotoxicity.

Asunto(s)

RESUMEN

Battery-type electrode materials have attracted much attention as efficient and unique types of materials for hybrid battery supercapacitors due to their multiple redox states and excellent electrical conductivity. Designing composites with high chemical and electrochemical stabilities is beneficial for improving the energy storage capability of battery-type electrode materials. We report on an interfacial engineering strategy to improve the energy storage performance of a Co(OH)2-based battery-type material by constructing polypyrrole-assisted and Ag-doped (Ag-doped@Co(OH)2@polypyrrole) nanosheets (NSs) on a Ni foam using a hydrothermal process that provides richer electroactive sites, efficient charge transportation, and an excellent mechanical stability. Physical characterization results revealed that the subsequent decoration of Ag nanoparticles on Co(OH)2 nanoparticles offered an efficient electrical conductivity as well as a reduced interface adsorption energy of OH- in Co(OH)2 nanoparticles as compared to Co(OH)2@polypyrrole-assisted nanoparticles without Ag particles. The heterogeneous interface of the Ag-doped@Co(OH)2@polypyrrole composite exhibited a high specific capacity of 291.2 mAh g-1 at a current density of 2 A g-1, and showed a good cycling stability after 5000 cycles at 5 A g-1. The specific capacity of the doped electrode was enhanced approximately two-fold compared to that of the pure electrode. Thus, the fabricated Ag-doped@Co(OH)2@polypyrrole nanostructured electrodes can be a potential candidate for fabricating low-cost and high-performance energy storage supercapacitor devices.

RESUMEN

Sintered silver (Ag) die-attach has attracted much attention in power systems with high power density and high operating temperature. In this paper, we proposed a novel surface modification method for Ag nanoparticles with organic amines as a coating agent for enhancing the pressureless sintering performance. This work systematically introduced the Ag nanoparticle modification process, Ag paste preparation, and sintering process and compared the changes in the sintering performance of Ag nanoparticles after modification with four different alkyl chain lengths of amines. The study showed that the sintered films of Ag nanoparticle pastes modified with n-octylamine (NOA) can achieve the lowest resistivity of the sintered film and the highest shear strength of the bonded joints. The resistivity of the sintered Ag film is affected by the grain size and microscopic morphology, and the strength of the bonded joints is also related to the sintering density and the amount of organic residues. The thermal behavior of the Ag particles coated with different amines is measured by thermal analysis. Finally, the mechanism of NOA-modified Ag nanoparticles to improve the sintering performance is proposed. This study can provide effective data and theoretical support for the further promotion and application of nano-Ag pressureless sintering.

RESUMEN

The die-bonding layer between chips and substrate determinates the heat conduction efficiency of high-power LED. Sn-based solder, AuSn20 eutectic, and nano-Ag paste were widely applied to LED interconnection. In this paper, the optical-thermal performances and high-temperature reliability of LED with these bonding materials have systematically compared and studied. The thermal conductivity, electrical resistivity, and mechanical property of these bonding materials were characterized. The LED module packaged with nano-Ag has a minimum working temperature of 21.5 °C. The total thermal resistance of LED packaged with nano-Ag, Au80Sn20, and SAC305 is 4.82, 7.84, and 8.75 K/W, respectively, which is 4.72, 6.14, and 7.84 K/W higher after aging for 500 h. Meanwhile, the junction temperature change of these LEDs increases from 2.33, 3.76, and 4.25 °C to 4.34, 4.81, and 6.41 °C after aging, respectively. The thermal resistance of the nano-Ag, Au80Sn20 and SAC305 layer after aging is 1.5%, 65.7%, and 151.5% higher than before aging, respectively. After aging, the LED bonded with nano-Ag has the better optical performances in spectral intensity and light output power, which indicates its excellent heat dissipation can improve the light efficiency. These results demonstrate the nano-Ag bonding material could enhance the optical-thermal performances and high-temperature reliability of high-power LED.

RESUMEN

Graphene oxide-cysteamine-silver nanoparticle (GCA)/silver nanowire (AgNW)/GCA/colorless poly(amide-imide) (cPAI) structures based on cPAI substrates with polyimide and polyamide syntheses were fabricated to study their characteristics. A layer of electrodes was constructed using a sandwich structure-such as GCA/AgNW/GCA-with cPAI used as a substrate to increase the heat resistance and improve their mechanical properties. Furthermore, to overcome the disadvantages of AgNWs-such as their high surface roughness and weak adhesion between the substrate and electrode layers-electrodes with embedded structures were fabricated using a peel-off process. Through bending, tapping, and durability tests, it was confirmed that these multilayer electrodes exhibited better mechanical durability than conventional AgNW electrodes. Resistive random-access memory based on GCA/AgNW/GCA/cPAI electrodes was fabricated, and its applicability to nonvolatile memory was confirmed. The memory device had an ON/OFF current ratio of ~104@0.5 V, exhibiting write-once-read-many time characteristics, maintaining these memory characteristics for up to 300 sweep cycles. These findings suggest that GCA/AgNW/GCA/cPAI electrodes could be used as flexible and transparent electrodes for next-generation flexible nonvolatile memories.

RESUMEN

Plasmon-enhanced photocatalysis has attracted considerable attention due to its low energy consumption and high energy throughput. Surface-enhanced Raman scattering (SERS) is a highly sensitive and label-free nondestructive tool to investigate plasmon-driven photocatalytic reactions. Herein, we present a facile method to fabricate gap-controlled Ag nanoparticle (NP) arrays with uniform and high-density distribution of hot spots, which can be employed as both efficient plasmonic photocatalysts and stable SERS platforms. The plasmon-driven catalytic reaction of 4-nitrobenzenethiol (4NBT), which transforms it into p, p'-dimercaptoazobenzene (DMAB), is detected by using an in situ SERS technique at the excited wavelength of 785 nm. According to the temperature and laser power density dependent photocatalytic reaction rates observed on the Ag NP arrays, we quantitatively determined that the reductive coupling of 4NBT is more likely to occur as the gap decreases. The finite-difference time-domain (FDTD) simulation results demonstrate that the plasmonic hot spots are significantly enhanced with a decrease in gap, which in turn reduces activation energy. The gap-controlled Ag NP arrays are efficient for both promotion and detection of plasmon-driven catalytic reactions, and may pave a pathway for implementing efficient plasmonic photocatalytic platforms.