RESUMEN

A newly developed 2H5MA-MOF sensor by covalently linking NH2-MIL-53(Al) with 2'-Hydroxy-5'-methylacetophenon, designed for highly sensitive and selective detection of Cd2+ ions using fluorometric methods. Detailed structural and morphological analyses confirmed the sensor's unique properties. It demonstrated an impressive linear detection range from 0 to 2 ppm, with an exceptionally low detection limit of 5.77 × 10-2 ppm and a quantification limit of 1.75 × 10-1 ppm, indicating its high sensitivity (R2 = 0.9996). The sensor also responded quickly, detecting Cd2+ within just 30 s at pH 4. We successfully tested it on real samples of tap water and human blood plasma, achieving recovery rates between 96 % and 104 %. The accuracy of these findings was further validated by comparison with ICP-OES. Overall, the 2H5MA-MOF sensor shows great potential for fast, ultra-sensitive, and reliable detection of Cd2+ ions, making it a promising tool for environmental and biomedical applications.

Asunto(s)

RESUMEN

In the current study, a biowaste cinnamon stick (CS) was used as an adsorbent and modified via in-situ techniques with titanium-based metal organic framework (MIL-125@CS) and carboxymethyl cellulose (CMC/MIL-125@CS). The prepared samples were characterized by various techniques, then utilized for toxic crystal violet (CV) dye removal. CV adsorption was examined for the effects of adsorbent dosage, solution pH, contact time, initial concentration, temperature and anion/cation/natural organic material (NOM). CV removal rate remarkably decreased at low pHs due to the degradation of CV and wavelength shift in the strongly acidic region. The kinetic and isotherm results showed that CMC/MIL-125@CS reached equilibrium much faster (30 min) and much higher adsorption capacity (6750.58 mg/g) than CS and MIL-125@CS. Furthermore, the samples were efficiently regenerated and reusable over five cycles, demonstrating significant adsorption rates. Functional material design approaches yielded superior CV adsorption performance.

RESUMEN

An ultrasensitive fluorescence detection strategy of chloramphenicol (CAP) was developed based on product catalysis of tetrahedral DNA framework (TDF) and fluorescent quenching of MIL-101(Fe). The product was used to catalyze the reaction. As the concentration of catalyst increased, the reaction time was significantly shorted to 21 min which was much shorter than other isothermal amplification technologies. Moreover, the multiple fluorophores of TDF and high efficient quenching ability of MIL-101(Fe) provided better performance with a linear range for CAP detecting from 1.6 pM to 80 pM and the limit of detection (LOD) as low as 0.67 pM. In addition, it also demonstrated good specificity and resistance to interference from other related antibiotics. Importantly, this strategy exhibited satisfactory relative standard deviation and recovery results for practical application, exhibiting a favorable application prospect in CAP analysis.

RESUMEN

Temperature modulation of the synthesis process of MOF-derived composites is not well understood for changes in the peroxymonosulfate catalytic domain. This study synthesized a carbon-based nitrogen-doped (MN@C) MOF-derived composite catalyst derived from MIL-88B(Fe) (Materials Institute Lavoisier) by modulating temperature changes and calcination. Combined with density-functional theory calculations (DFT) analyses showed that changes in iron nanoparticles (FeNP) and CN content caused the alterations of the degradation pathways. MN@C-9 exhibited outstanding activation performance (100 % carbamazepine (CBZ) removal within 10 min). The system maintained efficient operation in different aqueous environments and a wide pH range and demonstrated efficient removal of many pollutants typical of pharmaceuticals and personal care products (PPCPs). After comprehensively analyzing the results of liquid chromatography mass spectrometry (LC-MS) and toxicity prediction, the possible degradation pathways were reasonably speculated, and the toxicity of the byproducts was greatly reduced. This study provides a potential and efficient catalyst preparation strategy for water purification.

RESUMEN

In the present research, Fe-based metal-organic frameworks (MIL-101(Fe)-NH2) nanoparticles were synthesized by simple solvothermal methods and used to assay Cr(Ⅵ). The MIL-101(Fe)-NH2 performs dual functions: the 2-aminoterephthalic acid (NH2-BDC) ligand endows a strong fluorescence emission, and the Fe metal nodes are able to facilitate the oxidation of 3,3',5,5'- tetramethylbenzidine (TMB) directly, resulting in the generation of oxidized-TMB (ox-TMB). Our research results showed that reducing agents such as ascorbic acid (AA) can collapse the structures of MIL-101(Fe)-NH2 because of the reduction of Fe3+ by AA, resulting in release of NH2-BDC. In the presence of Cr(Ⅵ), the fluorescence intensity of the MIL-101(Fe)-NH2 + AA system will be decreased due to the competitive reduction of Fe3+ and Cr(Ⅵ). Nevertheless, Cr(Ⅵ) can significantly accelerate the oxidation of TMB by MIL-101(Fe)-NH2 as it boosts the electron transfer rate between Fe3+ and Fe2+. Therefore, a fluorescent/colorimetric dual-mode platform was developed for the detection of Cr(Ⅵ) with an extensive linear range (7.5-750 µg/L and 13.3-1000 µg/L) as well as a remarkably low detection limit (0.99 µg/L and 1.98 µg/L). This MOF with the ability to release ligands not only provides inspiration for the design of new luminescent materials, but also offers a novel and reliable solution for the detection of Cr(Ⅵ).

Asunto(s)

RESUMEN

Improving the charge separation, charge transfer, and effective utilization is crucial in a photocatalysis system. Herein, we prepared a novel direct Z-scheme NH2-MIL-125(Ti)@FeOCl (Ti-MOF@FeOCl) composite photocatalyst through a simple method. The prepared composite catalyst was utilized in the photo-Fenton degradation of Rhodamine B (RhB) and ciprofloxacin (CIP). The Ti-MOF@FeOCl (10FeTi-MOF) catalyst exhibited the highest catalytic performance and degraded 99.1 and 66% of RhB and CIP, respectively. However, the pure NH2-MIL-125(Ti) (Ti-MOF) and FeOCl catalysts achieved only 50 and 92% of RhB and 50 and 37% of CIP, respectively. The higher catalytic activities of the Ti-MOF@FeOCl composite catalyst could be due to the electronic structure improvements, photoinduced charge separations, and charge transfer abilities in the catalyst system. The composite catalysts have also enhanced adsorption and visible light-responsive properties, allowing for efficient degradation. Furthermore, the electron paramagnetic resonance (EPR) signals, the reactive species trapping experiments, and Mott-Schottky (M - S) measurements revealed that the photogenerated superoxide radical (•O2-), hydroxyl radical (•OH), and holes (h+) played a vital role in the degradation process. The results also demonstrated that the Ti-MOF@FeOCl heterojunction composite catalysts could be a promising photo-Fenton catalyst system for the environmental remediation. Environmental implications The discharging of toxic contaminants such as organic dyes, antibiotics, and other emerging pollutants to the environment deteriorates the ecosystem. Specifically, the residues of organic pollutants recognized as a threat to ecosystem and a cause for carcinogenic effects. Among them, ciprofloxacin is one of antibiotics which has biological resistance, and metabolize partially in the human or animal bodies. It is also difficult to degrade ciprofloxacin completely with traditional treatment methods. Similarly, organic dyes are also toxic and a cause for carcinogenic effects. Therefore, effective degradation of organic pollutants such as RhB and ciprofloxacin with appropriate method is crucial.

RESUMEN

A novel metal-organic framework (MOF) material, MIL-100(Fe)-DMA, was synthesized using the solvothermal method. The structure of the MOF was characterized using scanning electron microscopy-energy dispersive X-ray spectroscopy, N2 adsorption-desorption isotherms, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and Mössbauer spectroscopy. Batch adsorption experiments were performed to investigate the effects of initial Sr2+ and Cs+ concentrations, adsorption time, pH, and coexisting cations on the adsorption performance of the material. The adsorption mechanism was further elucidated using adsorption kinetics and isotherm models. The results indicated that the adsorption of Sr2+ and Cs+ does not significantly affect the MOF material structure. As reaction time and initial ion concentration increased, the adsorption capacity of MIL-100(Fe)-DMA for Sr2+ and Cs+ increased rapidly and then gradually reached equilibrium. Optimal adsorption occurred under alkaline conditions, with maximum adsorption capacity observed at pH = 8. The adsorption process for Sr2+ and Cs+ was well described by the pseudo-second-order kinetic model, the Weber-Morris model, and the Langmuir adsorption isothermal model. The adsorption process was mainly identified as monolayer chemical adsorption, influenced by multiple factors. Characterization combined with density functional theory calculations revealed that the unsaturated carboxylic acid groups on the surface of the MOFs play a crucial role in the interaction with Sr2+ and Cs+.

RESUMEN

In this study, a novel fluorescence nanoprobe based on Materials of Institute Lavoisier (MIL-101) metal-organic frameworks embedding into the agarose hydrogel is fabricated using a hydrothermal technique. It uses for sensitive quantification of deferiprone in exhaled breath condensate (EBC) samples. The morphology and characterization of MIL-101/agarose nanocomposite hydrogel is studied by transmission electron microscopy, dynamic light scattering instrument, powder X-ray diffraction analysis, and Fourier transform infrared spectroscopy. The probe shows a reasonable fluorescence intensity quenching in the presence of deferiprone due to the interactions between iron centers in MIL-101 (Fe) and deferiprone, which likely form non-fluorescent complexes. The proposed nanoprobe demonstrates a linear calibration curve from 0.005 to 1.5 µg mL- 1 with a detection limit of 0.003 µg mL- 1. The intra- and inter-day precision of the reported method are 0.3% and 0.4% (n = 5, deferiprone concentration = 1.0 µg mL- 1), respectively. This method demonstrates high sensitivity and specificity towards deferiprone in the EBC samples and also presents a sensing platform with simplicity, convenience, fast implementation, and cost-effective in medical monitoring.

RESUMEN

The overuse of antibiotics poses a serious threat to human health and ecosystems. Therefore, the development of high-performance antibiotic removal materials has attracted increasing attention. However, the adsorption and removal of trace amounts of antibiotics in aqueous systems still face significant challenges. Taking tetracycline (TC) as a representative antibiotic and based on its structural characteristics, a series of TC adsorbents are prepared by grafting alkyl groups to the framework of MIL-101(Cr). The adsorptive capacity of the modified materials for tetracycline markedly surpasses that of MIL-101(Cr), with MIL-101-dod achieving the best adsorption performance. MIL-101-dod demonstrated an outstanding ability to adsorb tetracycline at low concentrations, where a 5.0 mg sample of MIL-101-dod can reduce the concentration of a 90 mL 5 ppm tetracycline solution to below 1 ppb, significantly superior to other sorbents. XPS and IR tests indicate that MIL-101-dod has multiple weak interactions with tetracycline molecules, including C─H…O and C─H…π. This work provides theoretical and experimental support for the development of adsorbents for low-concentration antibiotics.

RESUMEN

This paper aims to address the issue of environmental pollution resulting from marine oil spills by evaluating the oil adsorption performance of commonly used fence materials. Conventional oil adsorption materials exhibit limited rates and capacities for oil adsorption. Existing methods have proven insufficient in meeting the requirements for efficient and rapid oil-water separation. A new oil-absorbing barrier was developed by utilizing high oil adsorption resin as the primary material and hydroxypropyl methyl cellulose (HPMC) as the binder, leveraging the exceptional oil adsorption and hydrophobic properties of P(BMA-SMA-St)/MIL-101(Fe) resin. The oil-absorbing fence was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The oil adsorption rates of carbon tetrachloride, toluene, diesel and gasoline by the oil adsorption fence with 25 g/L resin content were 101.26 g/m2, 68.12 g/m2, 35.19 g/m2, and 46.69 g/m2, respectively. After 120 h of UV irradiation, the coating's oil absorption capacity remained nearly unchanged, and it demonstrated outstanding mechanical, chemical, and wear resistance. As a result, the oil adsorption fence possesses the capability to rapidly absorb oil from the water's surface during the process of containing oil pollution, leading to positive social and economic impacts.

RESUMEN

In this study, we used Fe-MIL-101 nanozyme to convert lactose into lactitol, and it was proved that Fe-MIL-101 nanozyme has lactase-like activity. Due to the potential health effects of nanomaterials, we evaluated the cytotoxicity of Fe-MIL-101 nanozyme. To reduce the potential toxicity of the nanozyme, we applied centrifugation and membrane filtration. When the membrane aperture size was 100 nm, the residual content of Fe-MIL-101 nanozyme was 14.09 µg/mL. The residual content of Fe-MIL-101 nanozyme was reduced by optimizing time, temperature, and Fe-MIL-101 nanozyme-to-substrate ratio. It was showed that the concentration of Fe was 38.47 mg/kg and the concentration of H2BDC was 0 mg/kg under optimized conditions (110℃, 2 h of reaction and the ratio of Fe-MIL-101 nanozyme to substrate is 1:20). The result met the national standard of China. Experiments measuring cytotoxicity, oxidative stress, and cell membrane damage revealed that less than 20 µg/mL Fe-MIL-101 nanozyme had no significant cytotoxicity. Our study findings showed that Fe-MIL-101 nanozyme reduced lactose content in milk.

RESUMEN

Metal-doping is a common strategy for establishing active sites on photocatalyst, but appropriately exposing them for maximized atomic utilization remains a great challenge in photocatalytic research. Herein, we propose a metal organic framework (MOF)-assisted approach to synthesis copper-modified titania (Cu-TiO2/Cu) photocatalyst with homogenously distributed and highly accessible active sites in its matrix. Significantly, an MOF precursor, namely NH2-MIL-125, with co-chelation of titania (Ti) and copper (Cu) was subjected to mild calcination, subsequently results in Cu-modified TiO2 with highly accessible channels to its inner surface. These channels provide not only a large reactive surface (>400 m2 g-1); they also enable facile modifying route for the pre-deposited Cu in prior to photoreaction. Specifically, NH3 treatment was applied to partially reduce deposited Cu ions (Cu+ and Cu2+) into Cu nanoparticles, where their interplays realize improved optical properties and charge separation during photoreactions. Furthermore, the NH3-induced Cu nanoparticles could also serve as the adsorptive site for H+, thereby enabling 5629 µmol h-1 g-1 H2 generation over the optimum photocatalyst of Cu20/TiO2/Cu500. Such performance is associated to 35.44 and 1.71-fold improvements compared to pure TiO2 (Cu0/TiO2) and untreated Cu-ion modified TiO2 (Cu20/TiO2), respectively. This work offers a new synthetic strategy for obtaining photocatalyst with evenly distributed and highly accessible active sites, thus improving the commensurability of photocatalytic H2 generation from the industrial perspective.

RESUMEN

In this study, a hollow tubulous-shaped In2O3 derived from MIL (MIL-68 (In)) exhibited an enhanced specific surface area compared to MIL. To further sensitize In2O3, ZnIn2S4 was grown in situ on the derived In2O3. The 40In2O3/ZnIn2S4 composite (1 mmol ZnIn2S4 loaded on 40 mg In2O3) exhibited degradation rates of methyl orange (MO) under visible light (80 mW·cm-2, 150 min) that were 17.9 and 1.4 times higher than those of the pure In2O3 and ZnIn2S4, respectively. Moreover, the 40In2O3/ZnIn2S4 exhibited an obviously improved antibacterial performance against Pseudomonas aeruginosa, with an antibacterial rate of 99.8% after visible light irradiation of 80 mW cm-2 for 420 min. The 40In2O3/ZnIn2S4 composite showed the highest photocurrent density, indicating an enhanced separation of photogenerated charge carriers. Electron spin resonance results indicated that the 40In2O3/ZnIn2S4 composite generated both ·O2- and ·OH radicals under visible light, whereas ·OH radicals were almost not detected in ZnIn2S4 alone, suggesting the presence of a Z-scheme heterojunction between In2O3 and ZnIn2S4, thereby enhancing the degradation and antibacterial capabilities of the composite. This offers fresh perspectives on designing effective photocatalytic materials for use in antibacterial and antifouling applications.

RESUMEN

A novel colorimetric aptasensor assay based on the excellent magnetic responsiveness and oxidase-like activity of Fe3O4@MIL-100(Fe) was developed. Fe3O4@MIL-100(Fe) absorbed with aptamer and blocked by BSA served as capture probe for selective isolation and enrichment of Listeria monocytogenes one of the most common and dangerous foodborne pathogenic bacteria. The aptamer absorbed on Fe3O4@MIL-100(Fe) was further used as signal probe that specifically binds with target bacteria conjugation of capture probe for colorimetric detection of Listeria monocytogenes, taking advantages of its oxidase-like activity. The linear range of the detection of Listeria monocytogenes was from 102 to 107 CFU mL-1, with the limit of detection as low as 14 CFU mL-1. The approach also showed good feasibility for detection of Listeria monocytogenes in milk and meat samples. The spiked recoveries were in the range 81-114% with relative standard deviations ranging from 1.28 to 5.19%. Thus, this work provides an efficient, convenient, and practical tool for selective isolation and colorimetric detection of Listeria monocytogenes in food.

Asunto(s)

RESUMEN

In the domain of electrocatalytic NO3- reduction (NO3-RR) for the treatment of low-concentration nitrate-containing domestic or industrial wastewater, the conversion of NO3- into NH4+ holds significant promise for resource recovery. Nevertheless, the central challenge in this field revolves around the development of catalysts exhibiting both high catalytic activity and selectivity. To tackle this challenge, we design a two-step hydrothermal combine with carbonization process to fabricate a cobalt-doped Fe-based MOF (MIL-101) catalyst at 800 °C temperatures. The aim was to fully leverage cobalt's demonstrated high selectivity in NO3- electroreduction and enhance activity by promoting electron transfer through the d-band of Fe. The results indicate that the synthesized catalyst inherits multiple active sites from its precursor, with the co-doping process optimized through the topological properties of the MOF. Elemental analysis and oxidation state testing were employed to scrutinize the fundamental characteristics of this catalyst type and comprehend how these features may influence its efficiency. Electrochemical analysis revealed that, even under conditions of low NO3- concentration, the Cox@MIL-Fe catalyst achieved an impressive nitrate conversion rate of 98 % at -0.9 V vs. RHE. NH4+ selectivity was notably high at 87 %, and the by-product NO2- levels remained at a minimal threshold. The Faradaic efficiency for NH4+ reached 74 %, with ammonia yield approaching 0.08 mmol h-1 cm-2. This study furnishes indispensable research data for the design of Fe-based electrocatalysts for nitrate reduction, offering profound insights into the modulation of catalysts to play a pivotal role in the electroreduction of nitrate ions.

RESUMEN

Algal blooms have become a widespread concern for drinking water production, threatening ecosystems and human health. Photocatalysis, a promising advanced oxidation process (AOP) technology for wastewater treatment, is considered a potential measure for in situ remediation of algal blooms. However, conventional photocatalysts often suffer from limited visible-light response and rapid recombination of photogenerated electron-hole pairs. In this study, we prepared a Z-scheme AgBr/NH2-MIL-125(Ti) composite with excellent visible light absorption performance using co-precipitation to efficiently inactivate Microcystis aeruginosa. The degradation efficiency of AgBr/NH2-MIL-125(Ti) for chlorophyll a was 98.7 % after 180 min of visible light irradiation, significantly surpassing the degradation rate efficiency of AgBr and NH2-MIL-125(Ti) by factors of 3.20 and 36.75, respectively. Moreover, the removal rate was maintained at 91.1 % even after five times of repeated use. The experimental results indicated that superoxide radicals (•O2-) were the dominant reactive oxygen species involved. The photocatalytic reaction altered the morphology and surface charge of algal cells, inhibited their metabolism, and disrupted their photosynthetic and antioxidant systems. In conclusion, this study presents a promising material for the application of photocatalytic technology in algal bloom remediation.

Asunto(s)

RESUMEN

Residue of sulfamethazine (SMZ), a typical short-acting drug to prevent bacterial infections, in food is a threat to human health. A ternary heterogeneous metal-organic framework hybrid (Zn/Fe-MOF@PDANSs) of Zn-TCPP-MOF, MIL-101 (Fe) and polydopamine nanoparticles (PDANSs) was proposed to establish an aptasensor for the sensitive and selective detection of SMZ. In this sensor, Zn-TCPP-MOF and FAM emitted fluorescence at 609 nm and 523 nm, respectively, and the fluorescence of FAM-ssDNA could be quenched when it was adsorbed on the surface of MOF hybrid. In the presence of SMZ, the fluorescence of FAM-ssDNA recovered due to the dropping from MOF hybrid, while the fluorescence of MOF hybrid remained. With this strategy, a wide concentration range and high sensitivity of SMZ were detection. And the ternary Zn/Fe-MOF@PDANSs sensor exhibited more excellent performance than binary Zn/Fe-MOF aptasensor. In addition, the sensor showed pleasurable selectivity, and was utilized for SMZ determination in authentic chicken and pork samples, implying the fascinating potential in practical application.

Asunto(s)

RESUMEN

BACKGROUND: Nilotinib (NIL) is a prescription medication employed in the treatment of specific types of leukemia, namely chronic myelogenous leukemia (CML). The determination of NIL levels in patients undergoing treatment for CML is of paramount importance for effective management of treatment and toxicity. Also, monitoring and controlling its level in wastewater sources could help scientists to identify potential hotspots of contamination and take appropriate measures to mitigate their impact on the environment and public health. OBJECTIVES: This study presents a D-µ-SPE technique utilizing two MOFs as adsorbents for the efficient detection of nilotinib in plasma and wastewater samples for the first time. METHODS: Two highly effective MOFs, MIL-101(Fe) and MIL-53(Al), were synthesized and applied as dispersive micro-solid phase extraction (D-µ-SPE) adsorbents for the extraction of nilotinib coupled with HPLC-UV in a short time of analysis. Experimental parameters affecting extraction efficacy such as adsorbent amount, ionic strength, pH value, adsorption-desorption time and type of elution solvent, were optimized. RESULTS: Under optimal experimental conditions, the linear dynamic was achieved in the range of 0.25-5.00 µg/mL in human plasma and 0.01-0.20 µg/mL in wastewater. The extraction recovery was in the range of 89.18-91.53% and 94.39-99.60% for nilotinib and MIL-101(Fe) and also 91.22-97.35% and 98.14-100.78% for nilotinib and MIL-53(Al) from human plasma and wastewater respectively. CONCLUSION: HPLC-UV determination of nilotinib after the D-µ-SPE method showed acceptable accuracy and precision in both plasma and wastewater. In comparison between the two adsorbents, the extraction procedure was easier and faster with MIL-53(Al) as the adsorbent.

RESUMEN

In recent years, antibiotic pollution has received increasing attention. Tetracycline (TC) is a commonly used antibiotic in human medicine. The presence of TC in the environment inhibits bacterial growth and enhances antibiotic resistance in organisms. In this study, MoS2/MIL101(Fe) nanocomposites are mainly constructed to remove TC pollutants using photo-fenton technology and improve the ability of photo-fenton to treat antibiotic pollutants. The system shows excellent performance for the removal of tetracycline, and the removal rate of TC by MoS2/MIL101(Fe) nanocomposite reaches 93%. Through a series of experiments such as XRD, FTIR, XPS, SEM, ESR, UV-VIS DRS, Band gap energies, photocurrent response (I-t) and Zeta potential-pH, the results show that the system promotes the Fe3+/Fe2+ cycle reaction, significantly promotes the photodecomposition of H2O2 and the formation of O2- and •OH, and broadens the pH range of the photo-fenton oxidation reaction. The combination of the metal-assisted catalyst MoS2 and the metal-organic framework MIL101(Fe) has been demonstrated to effectively enhance the ability of the Fenton reaction for the treatment of antibiotics, showcasing innovative synergy. Furthermore, the utilization of molybdenite as a substitute for MoS2 in the preparation process avoids environmental pollution associated with the synthesis of MoS2. In this study, a novel, efficient, energy-saving and environmentally friendly catalyst for the removal of tetracycline has been developed, and has a wide range of applicability.

RESUMEN

The biocompatible MIL-88A metal-organic framework (MOF), synthesized from food-grade fumaric acid and ferric chloride, was introduced for the efficient one-step in situ encapsulation of capsaicinoids as a nanopreservative. The resulting MIL-88A@Caps nanoparticles can load 61.43 mg/g of capsaicinoids, surpassing conventional MOF-based encapsulation. The potent MIL-88A@Caps nanoformulations synergize the intrinsic antimicrobial properties of MIL-88A and capsaicinoids. At the same concentration (0.5 mg/mL), MIL-88A@Caps was highly effective against S. aureus and Salmonella, with inhibition rates of 94.90 ± 0.58% and 94.30 ± 1.24%, respectively, compared to MIL-88A (62.28 ± 5.04% and 70.46 ± 1.96%) and capsaicinoids (63.68 ± 1.25% and 49.53 ± 1.22%), respectively. Model precooked-chicken preservation experiments revealed that MIL-88A@Caps significantly delayed spoilage parameters compared to untreated samples, with more favorable viable counts (8.08 lgCFU/g), pH value (6.60 ± 0.02), TVB-N value (8.59 ± 0.21 mg/100 g), and color changes on day 9. Our findings yield a green nanopreservative for meat safety.

Asunto(s)